lib/dvb/frontend.cpp

   1 #include <config.h>
   2 #include <lib/dvb/dvb.h>
   3 #include <lib/base/eerror.h>
   4 #include <errno.h>
   5 #include <unistd.h>
   6 #include <fcntl.h>
   7 #include <sys/ioctl.h>
   8
   9 #ifndef I2C_SLAVE_FORCE
  10 #define I2C_SLAVE_FORCE 0x0706
  11 #endif
  12
  13 #if HAVE_DVB_API_VERSION < 3
  14 #include <ost/frontend.h>
  15 #include <ost/sec.h>
  16 #define QAM_AUTO                                (Modulation)6
  17 #define TRANSMISSION_MODE_AUTO  (TransmitMode)2
  18 #define BANDWIDTH_AUTO                  (BandWidth)3
  19 #define GUARD_INTERVAL_AUTO             (GuardInterval)4
  20 #define HIERARCHY_AUTO                  (Hierarchy)4
  21 #define constellation Constellation
  22 #define guard_interval guardInterval
  23 #define hierarchy_information HierarchyInformation
  24 #define code_rate_HP HP_CodeRate
  25 #define code_rate_LP LP_CodeRate
  26 #else
  27 #include <linux/dvb/frontend.h>
  28 #endif
  29
  30 #include <dvbsi++/satellite_delivery_system_descriptor.h>
  31 #include <dvbsi++/cable_delivery_system_descriptor.h>
  32 #include <dvbsi++/terrestrial_delivery_system_descriptor.h>
  33
  34 void eDVBFrontendParametersSatellite::set(const SatelliteDeliverySystemDescriptor &descriptor)
  35 {
  36         frequency    = descriptor.getFrequency() * 10;
  37         symbol_rate  = descriptor.getSymbolRate() * 100;
  38         switch (descriptor.getPolarization())
  39         {
  40         case 0:
  41                 polarisation = Polarisation::Horizontal;
  42                 break;
  43         case 1:
  44                 polarisation = Polarisation::Vertical;
  45                 break;
  46         case 2:
  47                 polarisation = Polarisation::CircularLeft;
  48                 break;
  49         case 3:
  50                 polarisation = Polarisation::CircularRight;
  51                 break;
  52         }
  53         switch (descriptor.getFecInner())
  54         {
  55         case 1:
  56                 fec = FEC::f1_2;
  57                 break;
  58         case 2:
  59                 fec = FEC::f2_3;
  60                 break;
  61         case 3:
  62                 fec = FEC::f3_4;
  63                 break;
  64         case 4:
  65                 fec = FEC::f5_6;
  66                 break;
  67         case 5:
  68                 fec = FEC::f7_8;
  69                 break;
  70         case 0xF:
  71                 fec = FEC::fNone;
  72                 break;
  73         default:
  74                 fec = FEC::fAuto;
  75                 break;
  76         }
  77         inversion = Inversion::Unknown;
  78         orbital_position  = ((descriptor.getOrbitalPosition() >> 12) & 0xF) * 1000;
  79         orbital_position += ((descriptor.getOrbitalPosition() >> 8) & 0xF) * 100;
  80         orbital_position += ((descriptor.getOrbitalPosition() >> 4) & 0xF) * 10;
  81         orbital_position += ((descriptor.getOrbitalPosition()) & 0xF);
  82         if (orbital_position && (!descriptor.getWestEastFlag()))
  83                 orbital_position = 3600 - orbital_position;
  84 }
  85
  86 void eDVBFrontendParametersCable::set(const CableDeliverySystemDescriptor &descriptor)
  87 {
  88         eFatal("nyi");
  89 }
  90
  91 void eDVBFrontendParametersTerrestrial::set(const TerrestrialDeliverySystemDescriptor  &)
  92 {
  93         eFatal("nyi");
  94 }
  95
  96 eDVBFrontendParameters::eDVBFrontendParameters(): m_type(-1)
  97 {
  98 }
  99
 100 DEFINE_REF(eDVBFrontendParameters);
 101
 102 RESULT eDVBFrontendParameters::getSystem(int &t) const
 103 {
 104         if (m_type == -1)
 105                 return -1;
 106         t = m_type;
 107         return 0;
 108 }
 109
 110 RESULT eDVBFrontendParameters::getDVBS(eDVBFrontendParametersSatellite &p) const
 111 {
 112         if (m_type != iDVBFrontend::feSatellite)
 113                 return -1;
 114         p = sat;
 115         return 0;
 116 }
 117
 118 RESULT eDVBFrontendParameters::getDVBC(eDVBFrontendParametersCable &p) const
 119 {
 120         if (m_type != iDVBFrontend::feCable)
 121                 return -1;
 122         p = cable;
 123         return 0;
 124 }
 125
 126 RESULT eDVBFrontendParameters::getDVBT(eDVBFrontendParametersTerrestrial &p) const
 127 {
 128         if (m_type != iDVBFrontend::feTerrestrial)
 129                 return -1;
 130         p = terrestrial;
 131         return 0;
 132 }
 133
 134 RESULT eDVBFrontendParameters::setDVBS(const eDVBFrontendParametersSatellite &p)
 135 {
 136         sat = p;
 137         m_type = iDVBFrontend::feSatellite;
 138         return 0;
 139 }
 140
 141 RESULT eDVBFrontendParameters::setDVBC(const eDVBFrontendParametersCable &p)
 142 {
 143         cable = p;
 144         m_type = iDVBFrontend::feCable;
 145         return 0;
 146 }
 147
 148 RESULT eDVBFrontendParameters::setDVBT(const eDVBFrontendParametersTerrestrial &p)
 149 {
 150         terrestrial = p;
 151         m_type = iDVBFrontend::feTerrestrial;
 152         return 0;
 153 }
 154
 155 RESULT eDVBFrontendParameters::calculateDifference(const iDVBFrontendParameters *parm, int &diff) const
 156 {
 157         if (!parm)
 158                 return -1;
 159         int type;
 160         if (parm->getSystem(type))
 161                 return -1;
 162         if (type != m_type)
 163         {
 164                 diff = 1<<30; // big difference
 165                 return 0;
 166         }
 167
 168         switch (type)
 169         {
 170         case iDVBFrontend::feSatellite:
 171         {
 172                 eDVBFrontendParametersSatellite osat;
 173                 if (parm->getDVBS(osat))
 174                         return -2;
 175
 176                 if (sat.orbital_position != osat.orbital_position)
 177                         diff = 1<<29;
 178                 else if (sat.polarisation != osat.polarisation)
 179                         diff = 1<<28;
 180                 else
 181                         diff = abs(sat.frequency - osat.frequency);
 182                 return 0;
 183         }
 184         case iDVBFrontend::feCable:
 185         case iDVBFrontend::feTerrestrial:
 186         default:
 187                 return -1;
 188         }
 189         return 0;
 190 }
 191
 192 RESULT eDVBFrontendParameters::getHash(unsigned long &hash) const
 193 {
 194         switch (m_type)
 195         {
 196         case iDVBFrontend::feSatellite:
 197         {
 198                 hash  = sat.frequency & 0xFFFF;
 199                 hash |= sat.orbital_position << 16;
 200                 return 0;
 201         }
 202         case iDVBFrontend::feCable:
 203         case iDVBFrontend::feTerrestrial:
 204         default:
 205                 return -1;
 206         }
 207 }
 208
 209 DEFINE_REF(eDVBFrontend);
 210
 211 eDVBFrontend::eDVBFrontend(int adap, int fe, int &ok): m_type(-1), m_fe(fe), m_curVoltage(-1)
 212 {
 213 #if HAVE_DVB_API_VERSION < 3
 214         char sec_filename[128];
 215 #endif
 216         char filename[128];
 217
 218         int result;
 219
 220         m_sn = 0;
 221         m_timeout = 0;
 222
 223 #if HAVE_DVB_API_VERSION < 3
 224         sprintf(sec_filename, "/dev/dvb/card%d/sec%d", adap, fe);
 225         m_secfd = ::open(sec_filename, O_RDWR);
 226         if (m_secfd < 0)
 227         {
 228                 eWarning("failed! (%s) %m", sec_filename);
 229                 ok = 0;
 230                 return;
 231         }
 232         else
 233                 eDebug("m_secfd is %d", m_secfd);
 234
 235         FrontendInfo fe_info;
 236         sprintf(filename, "/dev/dvb/card%d/frontend%d", adap, fe);
 237 #else
 238         dvb_frontend_info fe_info;
 239         sprintf(filename, "/dev/dvb/adapter%d/frontend%d", adap, fe);
 240 #endif
 241         eDebug("opening frontend.");
 242         m_fd = ::open(filename, O_RDWR|O_NONBLOCK);
 243         if (m_fd < 0)
 244         {
 245                 eWarning("failed! (%s) %m", filename);
 246                 ok = 0;
 247                 return;
 248         }
 249
 250         result = ::ioctl(m_fd, FE_GET_INFO, &fe_info);
 251
 252         if (result < 0) {
 253                 eWarning("ioctl FE_GET_INFO failed");
 254                 ::close(m_fd);
 255                 m_fd = -1;
 256                 ok = 0;
 257                 return;
 258         }
 259
 260         switch (fe_info.type)
 261         {
 262         case FE_QPSK:
 263                 m_type = feSatellite;
 264                 break;
 265         case FE_QAM:
 266                 m_type = feCable;
 267                 break;
 268         case FE_OFDM:
 269                 m_type = feTerrestrial;
 270                 break;
 271         default:
 272                 eWarning("unknown frontend type.");
 273                 ::close(m_fd);
 274                 m_fd = -1;
 275                 ok = 0;
 276                 return;
 277         }
 278         eDebug("detected %s frontend", "satellite\0cable\0    terrestrial"+fe_info.type*10);
 279         ok = 1;
 280
 281         m_sn = new eSocketNotifier(eApp, m_fd, eSocketNotifier::Read);
 282         CONNECT(m_sn->activated, eDVBFrontend::feEvent);
 283         m_sn->start();
 284
 285         m_timeout = new eTimer(eApp);
 286         CONNECT(m_timeout->timeout, eDVBFrontend::timeout);
 287
 288         m_tuneTimer = new eTimer(eApp);
 289         CONNECT(m_tuneTimer->timeout, eDVBFrontend::tuneLoop);
 290
 291         int entries = sizeof(m_data) / sizeof(int);
 292         for (int i=0; i<entries; ++i)
 293                 m_data[i] = -1;
 294
 295         return;
 296 }
 297
 298 eDVBFrontend::~eDVBFrontend()
 299 {
 300         if (m_fd >= 0)
 301                 ::close(m_fd);
 302         if (m_sn)
 303                 delete m_sn;
 304         if (m_timeout)
 305                 delete m_timeout;
 306 }
 307
 308 void eDVBFrontend::feEvent(int w)
 309 {
 310         while (1)
 311         {
 312 #if HAVE_DVB_API_VERSION < 3
 313                 FrontendEvent event;
 314 #else
 315                 dvb_frontend_event event;
 316 #endif
 317                 int res;
 318                 int state;
 319                 res = ::ioctl(m_fd, FE_GET_EVENT, &event);
 320
 321                 if (res && (errno == EAGAIN))
 322                         break;
 323
 324                 if (res)
 325                 {
 326                         eWarning("FE_GET_EVENT failed! %m");
 327                         return;
 328                 }
 329
 330                 if (w < 0)
 331                         continue;
 332
 333 #if HAVE_DVB_API_VERSION < 3
 334                 if (event.type == FE_COMPLETION_EV)
 335 #else
 336                 eDebug("fe event: status %x, inversion %s", event.status, (event.parameters.inversion == INVERSION_ON) ? "on" : "off");
 337                 if (event.status & FE_HAS_LOCK)
 338 #endif
 339                 {
 340                         state = stateLock;
 341                 } else
 342                 {
 343                         if (m_tuning)
 344                                 state = stateTuning;
 345                         else
 346                         {
 347                                 state = stateLostLock;
 348
 349                                 if (m_state != stateLostLock)
 350                                         eDebug("FIXME: we lost lock, so we might have to retune.");
 351                         }
 352                 }
 353                 if (m_state != state)
 354                 {
 355                         m_state = state;
 356                         m_stateChanged(this);
 357                 }
 358         }
 359 }
 360
 361 void eDVBFrontend::timeout()
 362 {
 363         int state;
 364         if (m_state == stateTuning)
 365         {
 366                 state = stateFailed;
 367                 eDebug("DVBFrontend: timeout");
 368                 if (m_state != state)
 369                 {
 370                         m_state = state;
 371                         m_stateChanged(this);
 372                 }
 373                 m_tuning = 0;
 374         } else
 375                 m_tuning = 0;
 376 }
 377
 378 #ifndef FP_IOCTL_GET_ID
 379 #define FP_IOCTL_GET_ID 0
 380 #endif
 381 int eDVBFrontend::readInputpower()
 382 {
 383         int power=0;
 384 //      if ( eSystemInfo::getInstance()->canMeasureLNBCurrent() )
 385         {
 386 //              switch ( eSystemInfo::getInstance()->getHwType() )
 387                 {
 388 //                      case eSystemInfo::DM7000:
 389 //                      case eSystemInfo::DM7020:
 390                         {
 391                                 // open front prozessor
 392                                 int fp=::open("/dev/dbox/fp0", O_RDWR);
 393                                 if (fp < 0)
 394                                 {
 395                                         eDebug("couldn't open fp");
 396                                         return -1;
 397                                 }
 398                                 static bool old_fp = (::ioctl(fp, FP_IOCTL_GET_ID) < 0);
 399                                 if ( ioctl( fp, old_fp ? 9 : 0x100, &power ) < 0 )
 400                                 {
 401                                         eDebug("FP_IOCTL_GET_LNB_CURRENT failed (%m)");
 402                                         return -1;
 403                                 }
 404                                 ::close(fp);
 405 //                              break;
 406                         }
 407 //                      default:
 408 //                              eDebug("Inputpower read for platform %d not yet implemented", eSystemInfo::getInstance()->getHwType());
 409                 }
 410         }
 411         return power;
 412 }
 413
 414 bool eDVBFrontend::setSecSequencePos(int steps)
 415 {
 416         eDebug("set sequence pos %d", steps);
 417         if (!steps)
 418                 return false;
 419         while( steps > 0 )
 420         {
 421                 if (m_sec_sequence.current() != m_sec_sequence.end())
 422                         ++m_sec_sequence.current();
 423                 --steps;
 424         }
 425         while( steps < 0 )
 426         {
 427                 if (m_sec_sequence.current() != m_sec_sequence.begin() && m_sec_sequence.current() != m_sec_sequence.end())
 428                         --m_sec_sequence.current();
 429                 ++steps;
 430         }
 431         return true;
 432 }
 433
 434 void eDVBFrontend::tuneLoop()  // called by m_tuneTimer
 435 {
 436         int delay=0;
 437         if ( m_sec_sequence && m_sec_sequence.current() != m_sec_sequence.end() )
 438         {
 439                 switch (m_sec_sequence.current()->cmd)
 440                 {
 441                         case eSecCommand::SLEEP:
 442                                 delay = m_sec_sequence.current()++->msec;
 443                                 eDebug("[SEC] sleep %dms", delay);
 444                                 break;
 445                         case eSecCommand::GOTO:
 446                                 if ( !setSecSequencePos(m_sec_sequence.current()->steps) )
 447                                         ++m_sec_sequence.current();
 448                                 break;
 449                         case eSecCommand::SET_VOLTAGE:
 450                                 int voltage = m_sec_sequence.current()++->voltage;
 451                                 eDebug("[SEC] setVoltage %d", voltage);
 452                                 setVoltage(voltage);
 453                                 break;
 454                         case eSecCommand::SET_TONE:
 455                                 eDebug("[SEC] setTone %d", m_sec_sequence.current()->tone);
 456                                 setTone(m_sec_sequence.current()++->tone);
 457                                 break;
 458                         case eSecCommand::SEND_DISEQC:
 459                                 sendDiseqc(m_sec_sequence.current()->diseqc);
 460                                 eDebugNoNewLine("[SEC] sendDiseqc: ");
 461                                 for (int i=0; i < m_sec_sequence.current()->diseqc.len; ++i)
 462                                     eDebugNoNewLine("%02x", m_sec_sequence.current()->diseqc.data[i]);
 463                                 eDebug("");
 464                                 ++m_sec_sequence.current();
 465                                 break;
 466                         case eSecCommand::SEND_TONEBURST:
 467                                 eDebug("[SEC] sendToneburst: %d", m_sec_sequence.current()->toneburst);
 468                                 sendToneburst(m_sec_sequence.current()++->toneburst);
 469                                 break;
 470                         case eSecCommand::SET_FRONTEND:
 471                                 eDebug("[SEC] setFrontend");
 472                                 setFrontend();
 473                                 ++m_sec_sequence.current();
 474                                 break;
 475                         case eSecCommand::MEASURE_IDLE_INPUTPOWER:
 476                         {
 477                                 int idx = m_sec_sequence.current()++->val;
 478                                 if ( idx == 0 || idx == 1 )
 479                                 {
 480                                         m_idleInputpower[idx] = readInputpower();
 481                                         eDebug("[SEC] idleInputpower[%d] is %d", idx, m_idleInputpower[idx]);
 482                                 }
 483                                 else
 484                                         eDebug("[SEC] idleInputpower measure index(%d) out of bound !!!", idx);
 485                                 break;
 486                         }
 487                         case eSecCommand::MEASURE_RUNNING_INPUTPOWER:
 488                                 m_runningInputpower = readInputpower();
 489                                 eDebug("[SEC] runningInputpower is %d", m_runningInputpower);
 490                                 ++m_sec_sequence.current();
 491                                 break;
 492                         case eSecCommand::SET_TIMEOUT:
 493                                 m_timeoutCount = m_sec_sequence.current()++->val;
 494                                 eDebug("[SEC] set timeout %d", m_timeoutCount);
 495                                 break;
 496                         case eSecCommand::UPDATE_CURRENT_ROTORPARAMS:
 497                                 m_data[5] = m_data[3];
 498                                 m_data[6] = m_data[4];
 499                                 eDebug("[SEC] update current rotorparams %d %04x %d", m_timeoutCount, m_data[5], m_data[6]);
 500                                 ++m_sec_sequence.current();
 501                                 break;
 502                         case eSecCommand::IF_TIMEOUT_GOTO:
 503                                 if (!m_timeoutCount)
 504                                 {
 505                                         eDebug("[SEC] rotor timout");
 506                                         setSecSequencePos(m_sec_sequence.current()->steps);
 507                                 }
 508                                 else
 509                                         ++m_sec_sequence.current();
 510                                 break;
 511                         case eSecCommand::SET_POWER_LIMITING_MODE:
 512                         {
 513                                 int fd=::open("/dev/i2c/0", O_RDWR);
 514                                 unsigned char data[2];
 515                                 ::ioctl(fd, I2C_SLAVE_FORCE, 0x10 >> 1);
 516                                 if(::read(fd, data, 1) != 1)
 517                                         eDebug("[SEC] error read lnbp (%m)");
 518                                 if ( m_sec_sequence.current()->mode == eSecCommand::modeStatic )
 519                                 {
 520                                         data[0] |= 0x90;  // enable static current limiting
 521                                         eDebug("[SEC] set static current limiting");
 522                                 }
 523                                 else
 524                                 {
 525                                         data[0] &= ~0x90;  // enable dynamic current limiting
 526                                         eDebug("[SEC] set dynamic current limiting");
 527                                 }
 528                                 if(::write(fd, data, 1) != 1)
 529                                         eDebug("[SEC] error write lnbp (%m)");
 530                                 ::close(fd);
 531                                 ++m_sec_sequence.current();
 532                                 break;
 533                         }
 534                         case eSecCommand::IF_IDLE_INPUTPOWER_AVAIL_GOTO:
 535                                 if (m_idleInputpower[0] && m_idleInputpower[1] && setSecSequencePos(m_sec_sequence.current()->steps))
 536                                         break;
 537                                 ++m_sec_sequence.current();
 538                                 break;
 539                         case eSecCommand::IF_INPUTPOWER_DELTA_GOTO:
 540                         {
 541                                 int idleInputpower = m_idleInputpower[m_curVoltage == iDVBFrontend::voltage13 ? 0 : 1];
 542                                 eSecCommand::rotor &cmd = m_sec_sequence.current()->measure;
 543                                 const char *txt = cmd.direction ? "running" : "stopped";
 544                                 eDebug("[SEC] waiting for rotor %s %d, idle %d, delta %d",
 545                                         txt,
 546                                         m_runningInputpower,
 547                                         idleInputpower,
 548                                         cmd.deltaA);
 549                                 if ( (cmd.direction && abs(m_runningInputpower - idleInputpower) >= cmd.deltaA)
 550                                         || (!cmd.direction && abs(m_runningInputpower - idleInputpower) <= cmd.deltaA) )
 551                                 {
 552                                         ++cmd.okcount;
 553                                         eDebug("[SEC] rotor %s step %d ok", txt, cmd.okcount);
 554                                         if ( cmd.okcount > 6 )
 555                                         {
 556                                                 eDebug("[SEC] rotor is %s", txt);
 557                                                 if (setSecSequencePos(cmd.steps))
 558                                                         break;
 559                                         }
 560                                 }
 561                                 else
 562                                 {
 563                                         eDebug("[SEC] rotor not %s... reset counter.. increase timeout", txt);
 564                                         --m_timeoutCount;
 565                                         cmd.okcount=0;
 566                                 }
 567                                 ++m_sec_sequence.current();
 568                                 break;
 569                         }
 570                         case eSecCommand::IF_VOLTAGE_GOTO:
 571                         {
 572                                 eSecCommand::pair &compare = m_sec_sequence.current()->compare;
 573                                 if ( compare.voltage == m_curVoltage && setSecSequencePos(compare.steps) )
 574                                         break;
 575                                 ++m_sec_sequence.current();
 576                                 break;
 577                         }
 578                         default:
 579                                 ++m_sec_sequence.current();
 580                                 eDebug("[SEC] unhandled sec command");
 581                 }
 582                 m_tuneTimer->start(delay,true);
 583         }
 584 }
 585
 586 void eDVBFrontend::setFrontend()
 587 {
 588         eDebug("setting frontend..\n");
 589         if (ioctl(m_fd, FE_SET_FRONTEND, &parm) == -1)
 590         {
 591                 perror("FE_SET_FRONTEND failed");
 592                 return;
 593         }
 594
 595         if (m_state != stateTuning)
 596         {
 597                 m_tuning = 1;
 598                 m_state = stateTuning;
 599                 m_stateChanged(this);
 600         }
 601         m_timeout->start(5000, 1); // 5 sec timeout. TODO: symbolrate dependent
 602 }
 603
 604 RESULT eDVBFrontend::getFrontendType(int &t)
 605 {
 606         if (m_type == -1)
 607                 return -ENODEV;
 608         t = m_type;
 609         return 0;
 610 }
 611
 612 RESULT eDVBFrontend::tune(const iDVBFrontendParameters &where)
 613 {
 614         if (m_type == -1)
 615                 return -ENODEV;
 616
 617         feEvent(-1);
 618
 619         m_sec_sequence.clear();
 620
 621         switch (m_type)
 622         {
 623         case feSatellite:
 624         {
 625                 int res;
 626                 eDVBFrontendParametersSatellite feparm;
 627                 if (where.getDVBS(feparm))
 628                 {
 629                         eDebug("no dvbs data!");
 630                         return -EINVAL;
 631                 }
 632                 if (!m_sec)
 633                 {
 634                         eWarning("no SEC module active!");
 635                         return -ENOENT;
 636                 }
 637
 638                 res = m_sec->prepare(*this, parm, feparm, 1 << m_fe);
 639                 if (res)
 640                         return res;
 641 #if HAVE_DVB_API_VERSION < 3
 642                 eDebug("tuning to %d mhz", parm.Frequency/1000);
 643 #else
 644                 eDebug("tuning to %d mhz", parm.frequency/1000);
 645 #endif
 646                 break;
 647         }
 648         case feCable:
 649         {
 650 #if HAVE_DVB_API_VERSION >= 3
 651                 eDVBFrontendParametersCable feparm;
 652                 if (where.getDVBC(feparm))
 653                         return -EINVAL;
 654 #if HAVE_DVB_API_VERSION < 3
 655                 parm.Frequency = feparm.frequency * 1000;
 656                 parm.u.qam.SymbolRate = feparm.symbol_rate;
 657 #else
 658                 parm.frequency = feparm.frequency * 1000;
 659                 parm.u.qam.symbol_rate = feparm.symbol_rate;
 660 #endif
 661                 fe_modulation_t mod;
 662                 switch (feparm.modulation)
 663                 {
 664                 case eDVBFrontendParametersCable::Modulation::QAM16:
 665                         mod = QAM_16;
 666                         break;
 667                 case eDVBFrontendParametersCable::Modulation::QAM32:
 668                         mod = QAM_32;
 669                         break;
 670                 case eDVBFrontendParametersCable::Modulation::QAM64:
 671                         mod = QAM_64;
 672                         break;
 673                 case eDVBFrontendParametersCable::Modulation::QAM128:
 674                         mod = QAM_128;
 675                         break;
 676                 case eDVBFrontendParametersCable::Modulation::QAM256:
 677                         mod = QAM_256;
 678                         break;
 679                 case eDVBFrontendParametersCable::Modulation::Auto:
 680                         mod = QAM_AUTO;
 681                         break;
 682                 }
 683 #if HAVE_DVB_API_VERSION < 3
 684                 parm.u.qam.QAM = mod;
 685 #else
 686                 parm.u.qam.modulation = mod;
 687 #endif
 688                 switch (feparm.inversion)
 689                 {
 690                 case eDVBFrontendParametersCable::Inversion::On:
 691                         #if HAVE_DVB_API_VERSION < 3
 692                         parm.Inversion =
 693                         #else
 694                         parm.inversion =
 695                         #endif
 696                                 INVERSION_ON;
 697                         break;
 698                 case eDVBFrontendParametersCable::Inversion::Off:
 699                         #if HAVE_DVB_API_VERSION < 3
 700                         parm.Inversion =
 701                         #else
 702                         parm.inversion =
 703                         #endif
 704                                 INVERSION_OFF;
 705                         break;
 706                 case eDVBFrontendParametersCable::Inversion::Unknown:
 707                         #if HAVE_DVB_API_VERSION < 3
 708                         parm.Inversion =
 709                         #else
 710                         parm.inversion =
 711                         #endif
 712                                 INVERSION_AUTO;
 713                         break;
 714                 }
 715
 716                 fe_code_rate_t fec_inner;
 717                 switch (feparm.fec_inner)
 718                 {
 719                 case eDVBFrontendParametersCable::FEC::fNone:
 720                         fec_inner = FEC_NONE;
 721                         break;
 722                 case eDVBFrontendParametersCable::FEC::f1_2:
 723                         fec_inner = FEC_1_2;
 724                         break;
 725                 case eDVBFrontendParametersCable::FEC::f2_3:
 726                         fec_inner = FEC_2_3;
 727                         break;
 728                 case eDVBFrontendParametersCable::FEC::f3_4:
 729                         fec_inner = FEC_3_4;
 730                         break;
 731                 case eDVBFrontendParametersCable::FEC::f4_5:
 732                         fec_inner = FEC_4_5;
 733                         break;
 734                 case eDVBFrontendParametersCable::FEC::f5_6:
 735                         fec_inner = FEC_5_6;
 736                         break;
 737                 case eDVBFrontendParametersCable::FEC::f6_7:
 738                         fec_inner = FEC_6_7;
 739                         break;
 740                 case eDVBFrontendParametersCable::FEC::f7_8:
 741                         fec_inner = FEC_7_8;
 742                         break;
 743                 case eDVBFrontendParametersCable::FEC::f8_9:
 744                         fec_inner = FEC_8_9;
 745                         break;
 746                 case eDVBFrontendParametersCable::FEC::fAuto:
 747                         fec_inner = FEC_AUTO;
 748                         break;
 749                 }
 750 #if HAVE_DVB_API_VERSION < 3
 751                 parm.u.qam.FEC_inner = fec_inner;
 752 #else
 753                 parm.u.qam.fec_inner = fec_inner;
 754 #endif
 755 #else
 756                 eFatal("Old API not fully supported");
 757 #endif // old api
 758                 break;
 759         }
 760         case feTerrestrial:
 761         {
 762                 eDVBFrontendParametersTerrestrial feparm;
 763                 if (where.getDVBT(feparm))
 764                 {
 765                         eDebug("no -T data");
 766                         return -EINVAL;
 767                 }
 768 #if HAVE_DVB_API_VERSION < 3
 769                 parm.Frequency = feparm.frequency;
 770 #else
 771                 parm.frequency = feparm.frequency;
 772 #endif
 773
 774                 switch (feparm.bandwidth)
 775                 {
 776                 case eDVBFrontendParametersTerrestrial::Bandwidth::Bw8MHz:
 777 #if HAVE_DVB_API_VERSION < 3
 778                         parm.u.ofdm.bandWidth =
 779 #else
 780                         parm.u.ofdm.bandwidth =
 781 #endif
 782                                 BANDWIDTH_8_MHZ;
 783                         break;
 784                 case eDVBFrontendParametersTerrestrial::Bandwidth::Bw7MHz:
 785 #if HAVE_DVB_API_VERSION < 3
 786                         parm.u.ofdm.bandWidth =
 787 #else
 788                         parm.u.ofdm.bandwidth =
 789 #endif
 790                                 BANDWIDTH_7_MHZ;
 791                         break;
 792                 case eDVBFrontendParametersTerrestrial::Bandwidth::Bw6MHz:
 793 #if HAVE_DVB_API_VERSION < 3
 794                         parm.u.ofdm.bandWidth =
 795 #else
 796                         parm.u.ofdm.bandwidth =
 797 #endif
 798                                 BANDWIDTH_6_MHZ;
 799                         break;
 800                 case eDVBFrontendParametersTerrestrial::Bandwidth::BwAuto:
 801 #if HAVE_DVB_API_VERSION < 3
 802                         parm.u.ofdm.bandWidth =
 803 #else
 804                         parm.u.ofdm.bandwidth =
 805 #endif
 806                                 BANDWIDTH_AUTO;
 807                         break;
 808                 default:
 809                         eWarning("invalid OFDM bandwith");
 810                         return -EINVAL;
 811                 }
 812
 813                 parm.u.ofdm.code_rate_HP = FEC_AUTO;
 814                 parm.u.ofdm.code_rate_LP = FEC_AUTO;
 815
 816                 switch (feparm.modulation)
 817                 {
 818                 case eDVBFrontendParametersTerrestrial::Modulation::QPSK:
 819                         parm.u.ofdm.constellation = QPSK;
 820                         break;
 821                 case eDVBFrontendParametersTerrestrial::Modulation::QAM16:
 822                         parm.u.ofdm.constellation = QAM_16;
 823                         break;
 824                 case eDVBFrontendParametersTerrestrial::Modulation::Auto:
 825                         parm.u.ofdm.constellation = QAM_AUTO;
 826                         break;
 827                 }
 828
 829                 switch (feparm.transmission_mode)
 830                 {
 831                 case eDVBFrontendParametersTerrestrial::TransmissionMode::TM2k:
 832 #if HAVE_DVB_API_VERSION < 3
 833                         parm.u.ofdm.TransmissionMode =
 834 #else
 835                         parm.u.ofdm.transmission_mode =
 836 #endif
 837                                 TRANSMISSION_MODE_2K;
 838                         break;
 839                 case eDVBFrontendParametersTerrestrial::TransmissionMode::TM8k:
 840 #if HAVE_DVB_API_VERSION < 3
 841                         parm.u.ofdm.TransmissionMode =
 842 #else
 843                         parm.u.ofdm.transmission_mode =
 844 #endif
 845                                 TRANSMISSION_MODE_8K;
 846                         break;
 847                 case eDVBFrontendParametersTerrestrial::TransmissionMode::TMAuto:
 848 #if HAVE_DVB_API_VERSION < 3
 849                         parm.u.ofdm.TransmissionMode =
 850 #else
 851                         parm.u.ofdm.transmission_mode =
 852 #endif
 853                                 TRANSMISSION_MODE_AUTO;
 854                         break;
 855                 }
 856
 857                 parm.u.ofdm.guard_interval = GUARD_INTERVAL_AUTO;
 858                 parm.u.ofdm.hierarchy_information = HIERARCHY_AUTO;
 859 #if HAVE_DVB_API_VERSION < 3
 860                 parm.Inversion =
 861 #else
 862                 parm.inversion =
 863 #endif
 864                         INVERSION_AUTO;
 865                 break;
 866         }
 867         }
 868
 869         m_sec_sequence.push_back( eSecCommand(eSecCommand::SET_FRONTEND) );
 870         m_tuneTimer->start(0,true);
 871         m_sec_sequence.current() = m_sec_sequence.begin();
 872
 873         return 0;
 874 }
 875
 876 RESULT eDVBFrontend::connectStateChange(const Slot1<void,iDVBFrontend*> &stateChange, ePtr<eConnection> &connection)
 877 {
 878         connection = new eConnection(this, m_stateChanged.connect(stateChange));
 879         return 0;
 880 }
 881
 882 RESULT eDVBFrontend::setVoltage(int voltage)
 883 {
 884 #if HAVE_DVB_API_VERSION < 3
 885         secVoltage vlt;
 886 #else
 887         fe_sec_voltage_t vlt;
 888 #endif
 889
 890         m_curVoltage=voltage;
 891         switch (voltage)
 892         {
 893         case voltageOff:
 894                 vlt = SEC_VOLTAGE_OFF;
 895                 break;
 896         case voltage13:
 897                 vlt = SEC_VOLTAGE_13;
 898                 break;
 899         case voltage18:
 900                 vlt = SEC_VOLTAGE_18;
 901                 break;
 902         default:
 903                 return -ENODEV;
 904         }
 905 #if HAVE_DVB_API_VERSION < 3
 906         return ::ioctl(m_secfd, SEC_SET_VOLTAGE, vlt);
 907 #else
 908         return ::ioctl(m_fd, FE_SET_VOLTAGE, vlt);
 909 #endif
 910 }
 911
 912 RESULT eDVBFrontend::getState(int &state)
 913 {
 914         state = m_state;
 915         return 0;
 916 }
 917
 918 RESULT eDVBFrontend::setTone(int t)
 919 {
 920 #if HAVE_DVB_API_VERSION < 3
 921         secToneMode_t tone;
 922 #else
 923         fe_sec_tone_mode_t tone;
 924 #endif
 925
 926         switch (t)
 927         {
 928         case toneOn:
 929                 tone = SEC_TONE_ON;
 930                 break;
 931         case toneOff:
 932                 tone = SEC_TONE_OFF;
 933                 break;
 934         default:
 935                 return -ENODEV;
 936         }
 937 #if HAVE_DVB_API_VERSION < 3
 938         return ::ioctl(m_secfd, SEC_SET_TONE, tone);
 939 #else
 940         return ::ioctl(m_fd, FE_SET_TONE, tone);
 941 #endif
 942 }
 943
 944 #if HAVE_DVB_API_VERSION < 3 && !defined(SEC_DISEQC_SEND_MASTER_CMD)
 945         #define SEC_DISEQC_SEND_MASTER_CMD _IOW('o', 97, struct secCommand *)
 946 #endif
 947
 948 RESULT eDVBFrontend::sendDiseqc(const eDVBDiseqcCommand &diseqc)
 949 {
 950 #if HAVE_DVB_API_VERSION < 3
 951         struct secCommand cmd;
 952         cmd.type = SEC_CMDTYPE_DISEQC_RAW;
 953         cmd.u.diseqc.cmdtype = diseqc.data[0];
 954         cmd.u.diseqc.addr = diseqc.data[1];
 955         cmd.u.diseqc.cmd = diseqc.data[2];
 956         cmd.u.diseqc.numParams = diseqc.len-3;
 957         memcpy(cmd.u.diseqc.params, diseqc.data+3, diseqc.len-3);
 958         if (::ioctl(m_secfd, SEC_DISEQC_SEND_MASTER_CMD, &cmd))
 959 #else
 960         struct dvb_diseqc_master_cmd cmd;
 961         memcpy(cmd.msg, diseqc.data, diseqc.len);
 962         cmd.msg_len = diseqc.len;
 963         if (::ioctl(m_fd, FE_DISEQC_SEND_MASTER_CMD, &cmd))
 964 #endif
 965                 return -EINVAL;
 966         return 0;
 967 }
 968
 969 #if HAVE_DVB_API_VERSION < 3 && !defined(SEC_DISEQC_SEND_BURST)
 970         #define SEC_DISEQC_SEND_BURST _IO('o', 96)
 971 #endif
 972 RESULT eDVBFrontend::sendToneburst(int burst)
 973 {
 974 #if HAVE_DVB_API_VERSION < 3
 975         secMiniCmd cmd = SEC_MINI_NONE;
 976         if ( burst == eDVBSatelliteDiseqcParameters::A )
 977                 cmd = SEC_MINI_A;
 978         else if ( burst == eDVBSatelliteDiseqcParameters::B )
 979                 cmd = SEC_MINI_B;
 980         if (::ioctl(m_secfd, SEC_DISEQC_SEND_BURST, cmd))
 981                 return -EINVAL;
 982 #endif
 983         return 0;
 984 }
 985
 986 RESULT eDVBFrontend::setSEC(iDVBSatelliteEquipmentControl *sec)
 987 {
 988         m_sec = sec;
 989         return 0;
 990 }
 991
 992 RESULT eDVBFrontend::setSecSequence(const eSecCommandList &list)
 993 {
 994         m_sec_sequence = list;
 995         return 0;
 996 }
 997
 998 RESULT eDVBFrontend::getData(int num, int &data)
 999 {
1000         if ( num < (int)(sizeof(m_data)/sizeof(int)) )
1001         {
1002                 data = m_data[num];
1003                 return 0;
1004         }
1005         return -EINVAL;
1006 }
1007
1008 RESULT eDVBFrontend::setData(int num, int val)
1009 {
1010         if ( num < (int)(sizeof(m_data)/sizeof(int)) )
1011         {
1012                 m_data[num] = val;
1013                 return 0;
1014         }
1015         return -EINVAL;
1016 }
1017
1018 int eDVBFrontend::isCompatibleWith(ePtr<iDVBFrontendParameters> &feparm)
1019 {
1020         if (m_type != eDVBFrontend::feSatellite)
1021                 return 1;
1022
1023         ASSERT(m_sec);
1024
1025         eDVBFrontendParametersSatellite sat_parm;
1026
1027         ASSERT(!feparm->getDVBS(sat_parm));
1028
1029         return m_sec->canTune(sat_parm, this, 1 << m_fe);
1030 }