#ifndef __dvb_sec_h
#define __dvb_sec_h
-#include <config.h>
#include <lib/dvb/idvb.h>
#include <list>
+#ifndef SWIG
class eSecCommand
{
public:
+ enum { modeStatic, modeDynamic };
enum {
NONE, SLEEP, SET_VOLTAGE, SET_TONE, GOTO,
SEND_DISEQC, SEND_TONEBURST, SET_FRONTEND,
+ SET_TIMEOUT, IF_TIMEOUT_GOTO,
+ IF_VOLTAGE_GOTO, IF_NOT_VOLTAGE_GOTO,
+ SET_POWER_LIMITING_MODE,
+ SET_ROTOR_DISEQC_RETRYS, IF_NO_MORE_ROTOR_DISEQC_RETRYS_GOTO,
MEASURE_IDLE_INPUTPOWER, MEASURE_RUNNING_INPUTPOWER,
- IF_TIMEOUT_GOTO, IF_RUNNING_GOTO, IF_STOPPED_GOTO,
- UPDATE_CURRENT_ROTORPARAMS, SET_TIMEOUT,
+ IF_MEASURE_IDLE_WAS_NOT_OK_GOTO, IF_INPUTPOWER_DELTA_GOTO,
+ UPDATE_CURRENT_ROTORPARAMS, INVALIDATE_CURRENT_ROTORPARMS,
+ IF_ROTORPOS_VALID_GOTO
};
int cmd;
+ struct rotor
+ {
+ int deltaA; // difference in mA between running and stopped rotor
+ int okcount; // counter
+ int steps; // goto steps
+ int direction;
+ };
+ struct pair
+ {
+ int voltage;
+ int steps;
+ };
union
{
int val;
int tone;
int toneburst;
int msec;
+ int mode;
+ rotor measure;
eDVBDiseqcCommand diseqc;
+ pair compare;
};
eSecCommand( int cmd )
:cmd(cmd)
eSecCommand( int cmd, eDVBDiseqcCommand diseqc )
:cmd(cmd), diseqc(diseqc)
{}
+ eSecCommand( int cmd, rotor measure )
+ :cmd(cmd), measure(measure)
+ {}
+ eSecCommand( int cmd, pair compare )
+ :cmd(cmd), compare(compare)
+ {}
eSecCommand()
:cmd(NONE)
{}
class eSecCommandList
{
- std::list<eSecCommand> secSequence;
- std::list<eSecCommand>::iterator cur;
+ typedef std::list<eSecCommand> List;
+ List secSequence;
+public:
+ typedef List::iterator iterator;
+private:
+ iterator cur;
public:
eSecCommandList()
:cur(secSequence.end())
secSequence.clear();
cur=secSequence.end();
}
- inline std::list<eSecCommand>::iterator ¤t()
+ inline iterator ¤t()
{
return cur;
}
- inline std::list<eSecCommand>::iterator begin()
+ inline iterator begin()
{
return secSequence.begin();
}
- inline std::list<eSecCommand>::iterator end()
+ inline iterator end()
{
return secSequence.end();
}
return secSequence.size();
}
};
+#endif
class eDVBSatelliteDiseqcParameters
{
+#ifdef SWIG
+ eDVBSatelliteDiseqcParameters();
+ ~eDVBSatelliteDiseqcParameters();
+#endif
public:
enum { AA=0, AB=1, BA=2, BB=3, SENDNO=4 /* and 0xF0 .. 0xFF*/ }; // DiSEqC Parameter
- int m_committed_cmd;
-
enum t_diseqc_mode { NONE=0, V1_0=1, V1_1=2, V1_2=3, SMATV=4 }; // DiSEqC Mode
- t_diseqc_mode m_diseqc_mode;
-
enum t_toneburst_param { NO=0, A=1, B=2 };
+#ifndef SWIG
+ __u8 m_committed_cmd;
+ t_diseqc_mode m_diseqc_mode;
t_toneburst_param m_toneburst_param;
- int m_repeats; // for cascaded switches
+ __u8 m_repeats; // for cascaded switches
bool m_use_fast; // send no DiSEqC on H/V or Lo/Hi change
bool m_seq_repeat; // send the complete DiSEqC Sequence twice...
- bool m_swap_cmds; // swaps the committed & uncommitted cmd
- int m_uncommitted_cmd; // state of the 4 uncommitted switches..
+ __u8 m_command_order;
+ /* diseqc 1.0)
+ 0) commited, toneburst
+ 1) toneburst, committed
+ diseqc > 1.0)
+ 2) committed, uncommitted, toneburst
+ 3) toneburst, committed, uncommitted
+ 4) uncommitted, committed, toneburst
+ 5) toneburst, uncommitted, committed */
+ __u8 m_uncommitted_cmd; // state of the 4 uncommitted switches..
+#endif
};
class eDVBSatelliteSwitchParameters
{
+#ifdef SWIG
+ eDVBSatelliteSwitchParameters();
+ ~eDVBSatelliteSwitchParameters();
+#endif
public:
enum t_22khz_signal { HILO=0, ON=1, OFF=2 }; // 22 Khz
enum t_voltage_mode { HV=0, _14V=1, _18V=2, _0V=3 }; // 14/18 V
+#ifndef SWIG
t_voltage_mode m_voltage_mode;
t_22khz_signal m_22khz_signal;
+ __u8 m_rotorPosNum; // 0 is disable.. then use gotoxx
+#endif
};
class eDVBSatelliteRotorParameters
{
+#ifdef SWIG
+ eDVBSatelliteRotorParameters();
+ ~eDVBSatelliteRotorParameters();
+#endif
public:
enum { NORTH, SOUTH, EAST, WEST };
+#ifndef SWIG
+ eDVBSatelliteRotorParameters() { setDefaultOptions(); }
struct eDVBSatelliteRotorInputpowerParameters
{
bool m_use; // can we use rotor inputpower to detect rotor running state ?
- int m_threshold; // threshold between running and stopped rotor
+ __u8 m_delta; // delta between running and stopped rotor
};
eDVBSatelliteRotorInputpowerParameters m_inputpower_parameters;
struct eDVBSatelliteRotorGotoxxParameters
{
- bool m_can_use; // rotor support gotoXX cmd ?
- int m_lo_direction; // EAST, WEST
- int m_la_direction; // NORT, SOUTH
- double m_longitude; // longitude for gotoXX° function
- double m_latitude; // latitude for gotoXX° function
+ __u8 m_lo_direction; // EAST, WEST
+ __u8 m_la_direction; // NORT, SOUTH
+ double m_longitude; // longitude for gotoXX? function
+ double m_latitude; // latitude for gotoXX? function
};
eDVBSatelliteRotorGotoxxParameters m_gotoxx_parameters;
- struct Orbital_Position_Compare
+ void setDefaultOptions() // set default rotor options
{
- inline bool operator()(const int &i1, const int &i2) const
- {
- return abs(i1-i2) < 6 ? false: i1 < i2;
- }
- };
- std::map< int, int, Orbital_Position_Compare > m_rotor_position_table;
- /* mapping orbitalposition <-> number stored in rotor */
-
- void setDefaultOptions(); // set default rotor options
-};
-
-class eDVBSatelliteParameters
-{
-public:
- eDVBSatelliteDiseqcParameters m_diseqc_parameters;
- eDVBSatelliteRotorParameters m_rotor_parameters;
- eDVBSatelliteSwitchParameters m_switch_parameters;
+ m_inputpower_parameters.m_use = true;
+ m_inputpower_parameters.m_delta = 60;
+ m_gotoxx_parameters.m_lo_direction = EAST;
+ m_gotoxx_parameters.m_la_direction = NORTH;
+ m_gotoxx_parameters.m_longitude = 0.0;
+ m_gotoxx_parameters.m_latitude = 0.0;
+ }
+#endif
};
class eDVBSatelliteLNBParameters
{
+#ifdef SWIG
+ eDVBSatelliteLNBParameters();
+ ~eDVBSatelliteLNBParameters();
+#endif
public:
enum t_12V_relais_state { OFF=0, ON };
+#ifndef SWIG
t_12V_relais_state m_12V_relais_state; // 12V relais output on/off
+ __u8 tuner_mask; // useable by tuner ( 1 | 2 | 4...)
+
unsigned int m_lof_hi, // for 2 band universal lnb 10600 Mhz (high band offset frequency)
m_lof_lo, // for 2 band universal lnb 9750 Mhz (low band offset frequency)
m_lof_threshold; // for 2 band universal lnb 11750 Mhz (band switch frequency)
bool m_increased_voltage; // use increased voltage ( 14/18V )
- std::map<int, eDVBSatelliteParameters> m_satellites;
+ std::map<int, eDVBSatelliteSwitchParameters> m_satellites;
+ eDVBSatelliteDiseqcParameters m_diseqc_parameters;
+ eDVBSatelliteRotorParameters m_rotor_parameters;
+#endif
};
+class eDVBRegisteredFrontend;
+
class eDVBSatelliteEquipmentControl: public iDVBSatelliteEquipmentControl
{
- std::list<eDVBSatelliteLNBParameters> m_lnblist;
+#ifndef SWIG
+ static eDVBSatelliteEquipmentControl *instance;
+ eDVBSatelliteLNBParameters m_lnbs[128]; // i think its enough
+ int m_lnbidx; // current index for set parameters
+ std::map<int, eDVBSatelliteSwitchParameters>::iterator m_curSat;
+ eSmartPtrList<eDVBRegisteredFrontend> &m_avail_frontends;
+ bool m_rotorMoving;
+#endif
+#ifdef SWIG
+ eDVBSatelliteEquipmentControl();
+ ~eDVBSatelliteEquipmentControl();
+#endif
+ // helper function for setTunerLinked and setTunerDepends
+ RESULT setDependencyPointers( int no1, int no2, int dest_data_byte );
public:
+#ifndef SWIG
+ eDVBSatelliteEquipmentControl(eSmartPtrList<eDVBRegisteredFrontend> &avail_frontends);
DECLARE_REF(eDVBSatelliteEquipmentControl);
- eDVBSatelliteEquipmentControl();
- RESULT prepare(iDVBFrontend &frontend, FRONTENDPARAMETERS &parm, eDVBFrontendParametersSatellite &sat);
+ RESULT prepare(iDVBFrontend &frontend, FRONTENDPARAMETERS &parm, eDVBFrontendParametersSatellite &sat, int frontend_id);
+ int canTune(const eDVBFrontendParametersSatellite &feparm, iDVBFrontend *, int frontend_id);
+ bool currentLNBValid() { return m_lnbidx > -1 && m_lnbidx < (int)(sizeof(m_lnbs) / sizeof(eDVBSatelliteLNBParameters)); }
+#endif
+ static eDVBSatelliteEquipmentControl *getInstance() { return instance; }
+ RESULT clear();
+/* LNB Specific Parameters */
+ RESULT addLNB();
+ RESULT setLNBTunerMask(int tunermask);
+ RESULT setLNBLOFL(int lofl);
+ RESULT setLNBLOFH(int lofh);
+ RESULT setLNBThreshold(int threshold);
+ RESULT setLNBIncreasedVoltage(bool onoff);
+/* DiSEqC Specific Parameters */
+ RESULT setDiSEqCMode(int diseqcmode);
+ RESULT setToneburst(int toneburst);
+ RESULT setRepeats(int repeats);
+ RESULT setCommittedCommand(int command);
+ RESULT setUncommittedCommand(int command);
+ RESULT setCommandOrder(int order);
+ RESULT setFastDiSEqC(bool onoff);
+ RESULT setSeqRepeat(bool onoff); // send the complete switch sequence twice (without rotor command)
+/* Rotor Specific Parameters */
+ RESULT setLongitude(float longitude);
+ RESULT setLatitude(float latitude);
+ RESULT setLoDirection(int direction);
+ RESULT setLaDirection(int direction);
+ RESULT setUseInputpower(bool onoff);
+ RESULT setInputpowerDelta(int delta); // delta between running and stopped rotor
+/* Satellite Specific Parameters */
+ RESULT addSatellite(int orbital_position);
+ RESULT setVoltageMode(int mode);
+ RESULT setToneMode(int mode);
+ RESULT setRotorPosNum(int rotor_pos_num);
+/* Tuner Specific Parameters */
+ RESULT setTunerLinked(int from, int to);
+ RESULT setTunerDepends(int from, int to);
+
+ void setRotorMoving(bool); // called from the frontend's
+ bool isRotorMoving();
};
#endif
git.cweiske.de / enigma2.git / blobdiff