}
eDVBSatelliteEquipmentControl::eDVBSatelliteEquipmentControl(eSmartPtrList<eDVBRegisteredFrontend> &avail_frontends, eSmartPtrList<eDVBRegisteredFrontend> &avail_simulate_frontends)
- :m_lnbidx(-1), m_curSat(m_lnbs[0].m_satellites.end()), m_avail_frontends(avail_frontends), m_avail_simulate_frontends(avail_simulate_frontends), m_rotorMoving(false)
+ :m_lnbidx((sizeof(m_lnbs) / sizeof(eDVBSatelliteLNBParameters))-1), m_curSat(m_lnbs[0].m_satellites.end()), m_avail_frontends(avail_frontends), m_avail_simulate_frontends(avail_simulate_frontends), m_rotorMoving(false)
{
if (!instance)
instance = this;
-
clear();
-
-// ASTRA
- addLNB();
- setLNBSlotMask(3);
- setLNBLOFL(9750000);
- setLNBThreshold(11700000);
- setLNBLOFH(10607000);
- setDiSEqCMode(eDVBSatelliteDiseqcParameters::V1_0);
- setToneburst(eDVBSatelliteDiseqcParameters::NO);
- setRepeats(0);
- setCommittedCommand(eDVBSatelliteDiseqcParameters::BB);
- setCommandOrder(0); // committed, toneburst
- setFastDiSEqC(true);
- setSeqRepeat(false);
- addSatellite(192);
- setVoltageMode(eDVBSatelliteSwitchParameters::HV);
- setToneMode(eDVBSatelliteSwitchParameters::HILO);
-
-// Hotbird
- addLNB();
- setLNBSlotMask(3);
- setLNBLOFL(9750000);
- setLNBThreshold(11700000);
- setLNBLOFH(10600000);
- setDiSEqCMode(eDVBSatelliteDiseqcParameters::V1_0);
- setToneburst(eDVBSatelliteDiseqcParameters::NO);
- setRepeats(0);
- setCommittedCommand(eDVBSatelliteDiseqcParameters::AB);
- setCommandOrder(0); // committed, toneburst
- setFastDiSEqC(true);
- setSeqRepeat(false);
- addSatellite(130);
- setVoltageMode(eDVBSatelliteSwitchParameters::HV);
- setToneMode(eDVBSatelliteSwitchParameters::HILO);
-
-// Rotor
- addLNB();
- setLNBSlotMask(3);
- setLNBLOFL(9750000);
- setLNBThreshold(11700000);
- setLNBLOFH(10600000);
- setDiSEqCMode(eDVBSatelliteDiseqcParameters::V1_2);
- setToneburst(eDVBSatelliteDiseqcParameters::NO);
- setRepeats(0);
- setCommittedCommand(eDVBSatelliteDiseqcParameters::AA);
- setCommandOrder(0); // committed, toneburst
- setFastDiSEqC(true);
- setSeqRepeat(false);
- setLaDirection(eDVBSatelliteRotorParameters::NORTH);
- setLoDirection(eDVBSatelliteRotorParameters::EAST);
- setLatitude(51.017);
- setLongitude(8.683);
- setUseInputpower(true);
- setInputpowerDelta(50);
-
- addSatellite(235);
- setVoltageMode(eDVBSatelliteSwitchParameters::HV);
- setToneMode(eDVBSatelliteSwitchParameters::HILO);
- setRotorPosNum(0);
-
- addSatellite(284);
- setVoltageMode(eDVBSatelliteSwitchParameters::HV);
- setToneMode(eDVBSatelliteSwitchParameters::HILO);
- setRotorPosNum(0);
-
- addSatellite(420);
- setVoltageMode(eDVBSatelliteSwitchParameters::HV);
- setToneMode(eDVBSatelliteSwitchParameters::HILO);
- setRotorPosNum(1); // stored pos 1
}
#define eSecDebugNoSimulate(x...) \
{
bool rotor=false;
eDVBSatelliteLNBParameters &lnb_param = m_lnbs[idx];
- if ( lnb_param.slot_mask & slot_id ) // lnb for correct tuner?
+ if ( lnb_param.m_slot_mask & slot_id ) // lnb for correct tuner?
{
int ret = 0;
eDVBSatelliteDiseqcParameters &di_param = lnb_param.m_diseqc_parameters;
if ( sat.frequency > lnb_param.m_lof_threshold )
band |= 1;
- if (!(sat.polarisation & eDVBFrontendParametersSatellite::Polarisation::Vertical))
+ if (!(sat.polarisation & eDVBFrontendParametersSatellite::Polarisation_Vertical))
band |= 2;
if (di_param.m_diseqc_mode >= eDVBSatelliteDiseqcParameters::V1_0)
eSecDebugNoSimulate("ret5 %d", ret);
}
- if (ret && rotor && curRotorPos != -1 && (direct_connected || !satpos_depends_ptr) ) // direct conntected or loopthrough!
+ if (ret && rotor && curRotorPos != -1)
ret -= abs(curRotorPos-sat.orbital_position);
eSecDebugNoSimulate("ret6 %d", ret);
ret=0;
}
+ if (ret && lnb_param.m_prio != -1)
+ ret = lnb_param.m_prio;
+
eSecDebugNoSimulate("ret %d, score old %d", ret, score);
if (ret > score)
{
}
}
if (score && satcount)
- score -= (satcount-1);
+ {
+ if (score > (satcount-1))
+ score -= (satcount-1);
+ else
+ score = 1; // min score
+ }
if (score && direct_connected)
score += 5; // increase score for tuners with direct sat connection
eSecDebugNoSimulate("final score %d", score);
lnb_param.m_satellites.find(sat.orbital_position);
if ( sit != lnb_param.m_satellites.end())
{
+ eSecCommandList sec_sequence;
+
+ lnb_param.guard_offset = 0; //HACK
+
+ frontend.setData(eDVBFrontend::SATCR, lnb_param.SatCR_idx);
+
eDVBSatelliteSwitchParameters &sw_param = sit->second;
bool doSetFrontend = true;
bool doSetVoltageToneFrontend = true;
- bool sendDiSEqC = false;
+ bool forceStaticMode = true;
+ bool forceChanged = false;
+ bool needDiSEqCReset = false;
long band=0,
voltage = iDVBFrontend::voltageOff,
tone = iDVBFrontend::toneOff,
curRotorPos = -1,
satposDependPtr = -1;
iDVBFrontend *sec_fe=&frontend;
+ eDVBRegisteredFrontend *linked_fe = 0;
eDVBSatelliteDiseqcParameters::t_diseqc_mode diseqc_mode = di_param.m_diseqc_mode;
+ eDVBSatelliteSwitchParameters::t_voltage_mode voltage_mode = sw_param.m_voltage_mode;
+ bool diseqc13V = voltage_mode == eDVBSatelliteSwitchParameters::HV_13;
+
+ if (diseqc13V)
+ voltage_mode = eDVBSatelliteSwitchParameters::HV;
frontend.getData(eDVBFrontend::SATPOS_DEPENDS_PTR, satposDependPtr);
frontend.getData(eDVBFrontend::LINKED_PREV_PTR, linked_prev_ptr);
while (linked_prev_ptr != -1)
{
- eDVBRegisteredFrontend *linked_fe = (eDVBRegisteredFrontend*) linked_prev_ptr;
+ linked_fe = (eDVBRegisteredFrontend*) linked_prev_ptr;
sec_fe = linked_fe->m_frontend;
sec_fe->getData(eDVBFrontend::LINKED_PREV_PTR, (long&)linked_prev_ptr);
}
if (satposDependPtr != -1) // we dont need uncommitted switch and rotor cmds on second output of a rotor lnb
diseqc_mode = eDVBSatelliteDiseqcParameters::V1_0;
+ else {
+ // in eDVBFrontend::tuneLoop we call closeFrontend and ->inc_use() in this this condition (to put the kernel frontend thread into idle state)
+ // so we must resend all diseqc stuff (voltage is disabled when the frontend is closed)
+ int state;
+ sec_fe->getState(state);
+ if (!linked_fe->m_inuse && state != eDVBFrontend::stateIdle)
+ forceChanged = true;
+ }
}
sec_fe->getData(eDVBFrontend::CSW, lastcsw);
sec_fe->getData(eDVBFrontend::ROTOR_CMD, lastRotorCmd);
sec_fe->getData(eDVBFrontend::ROTOR_POS, curRotorPos);
+ if (lastcsw == lastucsw && lastToneburst == lastucsw && lastucsw == -1)
+ needDiSEqCReset = true;
+
if ( sat.frequency > lnb_param.m_lof_threshold )
band |= 1;
+ if (!(sat.polarisation & eDVBFrontendParametersSatellite::Polarisation_Vertical))
+ band |= 2;
- if (band&1)
- parm.FREQUENCY = sat.frequency - lnb_param.m_lof_hi;
- else
- parm.FREQUENCY = sat.frequency - lnb_param.m_lof_lo;
-
- parm.FREQUENCY = abs(parm.FREQUENCY);
-
- frontend.setData(eDVBFrontend::FREQ_OFFSET, sat.frequency - parm.FREQUENCY);
+ int lof = (band&1)?lnb_param.m_lof_hi:lnb_param.m_lof_lo;
- if (!(sat.polarisation & eDVBFrontendParametersSatellite::Polarisation::Vertical))
- band |= 2;
+ int local=0;
- if ( sw_param.m_voltage_mode == eDVBSatelliteSwitchParameters::_14V
- || ( sat.polarisation & eDVBFrontendParametersSatellite::Polarisation::Vertical
- && sw_param.m_voltage_mode == eDVBSatelliteSwitchParameters::HV ) )
- voltage = VOLTAGE(13);
- else if ( sw_param.m_voltage_mode == eDVBSatelliteSwitchParameters::_18V
- || ( !(sat.polarisation & eDVBFrontendParametersSatellite::Polarisation::Vertical)
- && sw_param.m_voltage_mode == eDVBSatelliteSwitchParameters::HV ) )
- voltage = VOLTAGE(18);
- if ( (sw_param.m_22khz_signal == eDVBSatelliteSwitchParameters::ON)
- || ( sw_param.m_22khz_signal == eDVBSatelliteSwitchParameters::HILO && (band&1) ) )
- tone = iDVBFrontend::toneOn;
- else if ( (sw_param.m_22khz_signal == eDVBSatelliteSwitchParameters::OFF)
- || ( sw_param.m_22khz_signal == eDVBSatelliteSwitchParameters::HILO && !(band&1) ) )
- tone = iDVBFrontend::toneOff;
- eSecCommandList sec_sequence;
+ if(lnb_param.SatCR_idx == -1)
+ {
+ // calc Frequency
+ local = abs(sat.frequency
+ - ((lof - (lof % 1000)) + ((lof % 1000)>500 ? 1000 : 0)) ); //TODO für den Mist mal ein Macro schreiben
+ parm.FREQUENCY = (local - (local % 125)) + ((local % 125)>62 ? 125 : 0);
+ frontend.setData(eDVBFrontend::FREQ_OFFSET, sat.frequency - parm.FREQUENCY);
+
+ if ( voltage_mode == eDVBSatelliteSwitchParameters::_14V
+ || ( sat.polarisation & eDVBFrontendParametersSatellite::Polarisation_Vertical
+ && voltage_mode == eDVBSatelliteSwitchParameters::HV ) )
+ voltage = VOLTAGE(13);
+ else if ( voltage_mode == eDVBSatelliteSwitchParameters::_18V
+ || ( !(sat.polarisation & eDVBFrontendParametersSatellite::Polarisation_Vertical)
+ && voltage_mode == eDVBSatelliteSwitchParameters::HV ) )
+ voltage = VOLTAGE(18);
+ if ( (sw_param.m_22khz_signal == eDVBSatelliteSwitchParameters::ON)
+ || ( sw_param.m_22khz_signal == eDVBSatelliteSwitchParameters::HILO && (band&1) ) )
+ tone = iDVBFrontend::toneOn;
+ else if ( (sw_param.m_22khz_signal == eDVBSatelliteSwitchParameters::OFF)
+ || ( sw_param.m_22khz_signal == eDVBSatelliteSwitchParameters::HILO && !(band&1) ) )
+ tone = iDVBFrontend::toneOff;
+ }
+ else
+ {
+ unsigned int tmp = abs(sat.frequency
+ - ((lof - (lof % 1000)) + ((lof % 1000)>500 ? 1000 : 0)) )
+ + lnb_param.SatCRvco
+ - 1400000
+ + lnb_param.guard_offset;
+ parm.FREQUENCY = (lnb_param.SatCRvco - (tmp % 4000))+((tmp%4000)>2000?4000:0)+lnb_param.guard_offset;
+ lnb_param.UnicableTuningWord = (((tmp / 4000)+((tmp%4000)>2000?1:0))
+ | ((band & 1) ? 0x400 : 0) //HighLow
+ | ((band & 2) ? 0x800 : 0) //VertHor
+ | ((lnb_param.LNBNum & 1) ? 0 : 0x1000) //Umschaltung LNB1 LNB2
+ | (lnb_param.SatCR_idx << 13)); //Adresse des SatCR
+ eDebug("[prepare] UnicableTuningWord %#04x",lnb_param.UnicableTuningWord);
+ eDebug("[prepare] guard_offset %d",lnb_param.guard_offset);
+ frontend.setData(eDVBFrontend::FREQ_OFFSET, sat.frequency - ((lnb_param.UnicableTuningWord & 0x3FF) *4000 + 1400000 - lnb_param.SatCRvco + lof));
+ }
if (diseqc_mode >= eDVBSatelliteDiseqcParameters::V1_0)
{
bool send_csw =
(di_param.m_committed_cmd != eDVBSatelliteDiseqcParameters::SENDNO);
- bool changed_csw = send_csw && csw != lastcsw;
+ bool changed_csw = send_csw && (forceChanged || csw != lastcsw);
bool send_ucsw =
(di_param.m_uncommitted_cmd && diseqc_mode > eDVBSatelliteDiseqcParameters::V1_0);
- bool changed_ucsw = send_ucsw && ucsw != lastucsw;
+ bool changed_ucsw = send_ucsw && (forceChanged || ucsw != lastucsw);
bool send_burst =
(di_param.m_toneburst_param != eDVBSatelliteDiseqcParameters::NO);
- bool changed_burst = send_burst && toneburst != lastToneburst;
+ bool changed_burst = send_burst && (forceChanged || toneburst != lastToneburst);
int send_mask = 0; /*
1 must send csw
sec_sequence.push_back( eSecCommand(eSecCommand::SET_TONE, iDVBFrontend::toneOff) );
sec_sequence.push_back( eSecCommand(eSecCommand::SLEEP, m_params[DELAY_AFTER_CONT_TONE]) );
- if ( RotorCmd != -1 && RotorCmd != lastRotorCmd )
+ if (diseqc13V)
+ vlt = iDVBFrontend::voltage13;
+ else if ( RotorCmd != -1 && RotorCmd != lastRotorCmd )
{
if (rotor_param.m_inputpower_parameters.m_use)
vlt = VOLTAGE(18); // in input power mode set 18V for measure input power
sec_sequence.push_back( eSecCommand(eSecCommand::SLEEP, m_params[DELAY_AFTER_ENABLE_VOLTAGE_BEFORE_SWITCH_CMDS]) );
sec_sequence.push_back( eSecCommand(eSecCommand::INVALIDATE_CURRENT_SWITCHPARMS) );
+ if (needDiSEqCReset)
+ {
+ eDVBDiseqcCommand diseqc;
+ memset(diseqc.data, 0, MAX_DISEQC_LENGTH);
+ diseqc.len = 3;
+ diseqc.data[0] = 0xE0;
+ diseqc.data[1] = 0;
+ diseqc.data[2] = 0;
+ // diseqc reset
+ sec_sequence.push_back( eSecCommand(eSecCommand::SEND_DISEQC, diseqc) );
+ sec_sequence.push_back( eSecCommand(eSecCommand::SLEEP, m_params[DELAY_AFTER_DISEQC_RESET_CMD]) );
+ diseqc.data[2] = 3;
+ // diseqc peripherial powersupply on
+ sec_sequence.push_back( eSecCommand(eSecCommand::SEND_DISEQC, diseqc) );
+ sec_sequence.push_back( eSecCommand(eSecCommand::SLEEP, m_params[DELAY_AFTER_DISEQC_PERIPHERIAL_POWERON_CMD]) );
+ }
+
for (int seq_repeat = 0; seq_repeat < (di_param.m_seq_repeat?2:1); ++seq_repeat)
{
if ( send_mask & 4 )
if (di_param.m_seq_repeat && seq_repeat == 0)
sec_sequence.push_back( eSecCommand(eSecCommand::SLEEP, m_params[DELAY_BEFORE_SEQUENCE_REPEAT]) );
}
- sendDiSEqC = true;
}
eDebugNoSimulate("RotorCmd %02x, lastRotorCmd %02lx", RotorCmd, lastRotorCmd);
if ( RotorCmd != -1 && RotorCmd != lastRotorCmd )
{
eSecCommand::pair compare;
- if (!send_mask)
+ if (!send_mask && lnb_param.SatCR_idx == -1)
{
compare.steps = +3;
compare.tone = iDVBFrontend::toneOff;
diseqc.data[3] = RotorCmd;
diseqc.data[4] = 0x00;
}
-
- if ( rotor_param.m_inputpower_parameters.m_use )
- { // use measure rotor input power to detect rotor state
- bool turn_fast = need_turn_fast(rotor_param.m_inputpower_parameters.m_turning_speed);
- eSecCommand::rotor cmd;
- eSecCommand::pair compare;
- compare.voltage = VOLTAGE(18);
- compare.steps = +3;
- sec_sequence.push_back( eSecCommand(eSecCommand::IF_VOLTAGE_GOTO, compare) );
- sec_sequence.push_back( eSecCommand(eSecCommand::SET_VOLTAGE, compare.voltage) );
-// measure idle power values
- sec_sequence.push_back( eSecCommand(eSecCommand::SLEEP, m_params[DELAY_AFTER_VOLTAGE_CHANGE_BEFORE_MEASURE_IDLE_INPUTPOWER]) ); // wait 150msec after voltage change
- sec_sequence.push_back( eSecCommand(eSecCommand::MEASURE_IDLE_INPUTPOWER, 1) );
- compare.val = 1;
- compare.steps = -2;
- sec_sequence.push_back( eSecCommand(eSecCommand::IF_MEASURE_IDLE_WAS_NOT_OK_GOTO, compare) );
- sec_sequence.push_back( eSecCommand(eSecCommand::SET_VOLTAGE, VOLTAGE(13)) );
- sec_sequence.push_back( eSecCommand(eSecCommand::SLEEP, m_params[DELAY_AFTER_VOLTAGE_CHANGE_BEFORE_MEASURE_IDLE_INPUTPOWER]) ); // wait 150msec before measure
- sec_sequence.push_back( eSecCommand(eSecCommand::MEASURE_IDLE_INPUTPOWER, 0) );
- compare.val = 0;
- sec_sequence.push_back( eSecCommand(eSecCommand::IF_MEASURE_IDLE_WAS_NOT_OK_GOTO, compare) );
-////////////////////////////
- sec_sequence.push_back( eSecCommand(eSecCommand::SET_ROTOR_DISEQC_RETRYS, m_params[MOTOR_COMMAND_RETRIES]) ); // 2 retries
- sec_sequence.push_back( eSecCommand(eSecCommand::INVALIDATE_CURRENT_ROTORPARMS) );
- sec_sequence.push_back( eSecCommand(eSecCommand::SEND_DISEQC, diseqc) );
- sec_sequence.push_back( eSecCommand(eSecCommand::SET_TIMEOUT, 40) ); // 2 seconds rotor start timout
-// rotor start loop
- sec_sequence.push_back( eSecCommand(eSecCommand::SLEEP, 50) ); // 50msec delay
- sec_sequence.push_back( eSecCommand(eSecCommand::MEASURE_RUNNING_INPUTPOWER) );
- cmd.direction=1; // check for running rotor
- cmd.deltaA=rotor_param.m_inputpower_parameters.m_delta;
- cmd.steps=+5;
- cmd.okcount=0;
- sec_sequence.push_back( eSecCommand(eSecCommand::IF_INPUTPOWER_DELTA_GOTO, cmd ) ); // check if rotor has started
- sec_sequence.push_back( eSecCommand(eSecCommand::IF_TIMEOUT_GOTO, +2 ) ); // timeout .. we assume now the rotor is already at the correct position
- sec_sequence.push_back( eSecCommand(eSecCommand::GOTO, -4) ); // goto loop start
- sec_sequence.push_back( eSecCommand(eSecCommand::IF_NO_MORE_ROTOR_DISEQC_RETRYS_GOTO, turn_fast ? 10 : 9 ) ); // timeout .. we assume now the rotor is already at the correct position
- sec_sequence.push_back( eSecCommand(eSecCommand::GOTO, -8) ); // goto loop start
-////////////////////
- sec_sequence.push_back( eSecCommand(eSecCommand::SET_ROTOR_MOVING) );
- if (turn_fast)
- sec_sequence.push_back( eSecCommand(eSecCommand::SET_VOLTAGE, VOLTAGE(18)) );
- sec_sequence.push_back( eSecCommand(eSecCommand::SET_TIMEOUT, m_params[MOTOR_RUNNING_TIMEOUT]*20) ); // 2 minutes running timeout
-// rotor running loop
- sec_sequence.push_back( eSecCommand(eSecCommand::SLEEP, 50) ); // wait 50msec
- sec_sequence.push_back( eSecCommand(eSecCommand::MEASURE_RUNNING_INPUTPOWER) );
- cmd.direction=0; // check for stopped rotor
- cmd.steps=+3;
- sec_sequence.push_back( eSecCommand(eSecCommand::IF_INPUTPOWER_DELTA_GOTO, cmd ) );
- sec_sequence.push_back( eSecCommand(eSecCommand::IF_TIMEOUT_GOTO, +2 ) ); // timeout ? this should never happen
- sec_sequence.push_back( eSecCommand(eSecCommand::GOTO, -4) ); // running loop start
-/////////////////////
- sec_sequence.push_back( eSecCommand(eSecCommand::UPDATE_CURRENT_ROTORPARAMS) );
- sec_sequence.push_back( eSecCommand(eSecCommand::SET_ROTOR_STOPPED) );
- }
- else
- { // use normal turning mode
- doSetVoltageToneFrontend=false;
- doSetFrontend=false;
- eSecCommand::rotor cmd;
- eSecCommand::pair compare;
- compare.voltage = VOLTAGE(13);
- compare.steps = +3;
- sec_sequence.push_back( eSecCommand(eSecCommand::IF_VOLTAGE_GOTO, compare) );
- sec_sequence.push_back( eSecCommand(eSecCommand::SET_VOLTAGE, compare.voltage) );
- sec_sequence.push_back( eSecCommand(eSecCommand::SLEEP, m_params[DELAY_AFTER_VOLTAGE_CHANGE_BEFORE_MOTOR_CMD]) ); // wait 150msec after voltage change
-
- sec_sequence.push_back( eSecCommand(eSecCommand::INVALIDATE_CURRENT_ROTORPARMS) );
- sec_sequence.push_back( eSecCommand(eSecCommand::SET_ROTOR_MOVING) );
- sec_sequence.push_back( eSecCommand(eSecCommand::SEND_DISEQC, diseqc) );
-
- compare.voltage = voltage;
- compare.steps = +3;
- sec_sequence.push_back( eSecCommand(eSecCommand::IF_VOLTAGE_GOTO, compare) ); // correct final voltage?
- sec_sequence.push_back( eSecCommand(eSecCommand::SLEEP, 2000) ); // wait 2 second before set high voltage
- sec_sequence.push_back( eSecCommand(eSecCommand::SET_VOLTAGE, voltage) );
-
- compare.tone = tone;
- sec_sequence.push_back( eSecCommand(eSecCommand::IF_TONE_GOTO, compare) );
- sec_sequence.push_back( eSecCommand(eSecCommand::SET_TONE, tone) );
- sec_sequence.push_back( eSecCommand(eSecCommand::SLEEP, m_params[DELAY_AFTER_CONT_TONE]) );
- sec_sequence.push_back( eSecCommand(eSecCommand::SET_FRONTEND) );
-
- cmd.direction=1; // check for running rotor
- cmd.deltaA=0;
- cmd.steps=+3;
- cmd.okcount=0;
- sec_sequence.push_back( eSecCommand(eSecCommand::SET_TIMEOUT, m_params[MOTOR_RUNNING_TIMEOUT]*4) ); // 2 minutes running timeout
- sec_sequence.push_back( eSecCommand(eSecCommand::SLEEP, 250) ); // 250msec delay
- sec_sequence.push_back( eSecCommand(eSecCommand::IF_TUNER_LOCKED_GOTO, cmd ) );
- sec_sequence.push_back( eSecCommand(eSecCommand::IF_TIMEOUT_GOTO, +3 ) );
- sec_sequence.push_back( eSecCommand(eSecCommand::GOTO, -3) ); // goto loop start
- sec_sequence.push_back( eSecCommand(eSecCommand::UPDATE_CURRENT_ROTORPARAMS) );
- sec_sequence.push_back( eSecCommand(eSecCommand::SET_ROTOR_STOPPED) );
- sec_sequence.push_back( eSecCommand(eSecCommand::GOTO, +3) );
- sec_sequence.push_back( eSecCommand(eSecCommand::SET_FRONTEND) );
- sec_sequence.push_back( eSecCommand(eSecCommand::GOTO, -4) );
+ if(lnb_param.SatCR_idx == -1)
+ {
+ if ( rotor_param.m_inputpower_parameters.m_use )
+ { // use measure rotor input power to detect rotor state
+ bool turn_fast = need_turn_fast(rotor_param.m_inputpower_parameters.m_turning_speed);
+ eSecCommand::rotor cmd;
+ eSecCommand::pair compare;
+ if (turn_fast)
+ compare.voltage = VOLTAGE(18);
+ else
+ compare.voltage = VOLTAGE(13);
+ compare.steps = +3;
+ sec_sequence.push_back( eSecCommand(eSecCommand::IF_VOLTAGE_GOTO, compare) );
+ sec_sequence.push_back( eSecCommand(eSecCommand::SET_VOLTAGE, compare.voltage) );
+ // measure idle power values
+ compare.steps = -2;
+ if (turn_fast) {
+ sec_sequence.push_back( eSecCommand(eSecCommand::SLEEP, m_params[DELAY_AFTER_VOLTAGE_CHANGE_BEFORE_MEASURE_IDLE_INPUTPOWER]) ); // wait 150msec after voltage change
+ sec_sequence.push_back( eSecCommand(eSecCommand::MEASURE_IDLE_INPUTPOWER, 1) );
+ compare.val = 1;
+ sec_sequence.push_back( eSecCommand(eSecCommand::IF_MEASURE_IDLE_WAS_NOT_OK_GOTO, compare) );
+ sec_sequence.push_back( eSecCommand(eSecCommand::SET_VOLTAGE, VOLTAGE(13)) );
+ }
+ sec_sequence.push_back( eSecCommand(eSecCommand::SLEEP, m_params[DELAY_AFTER_VOLTAGE_CHANGE_BEFORE_MEASURE_IDLE_INPUTPOWER]) ); // wait 150msec before measure
+ sec_sequence.push_back( eSecCommand(eSecCommand::MEASURE_IDLE_INPUTPOWER, 0) );
+ compare.val = 0;
+ sec_sequence.push_back( eSecCommand(eSecCommand::IF_MEASURE_IDLE_WAS_NOT_OK_GOTO, compare) );
+ ////////////////////////////
+ sec_sequence.push_back( eSecCommand(eSecCommand::SET_ROTOR_DISEQC_RETRYS, m_params[MOTOR_COMMAND_RETRIES]) ); // 2 retries
+ sec_sequence.push_back( eSecCommand(eSecCommand::INVALIDATE_CURRENT_ROTORPARMS) );
+ sec_sequence.push_back( eSecCommand(eSecCommand::SEND_DISEQC, diseqc) );
+ sec_sequence.push_back( eSecCommand(eSecCommand::SET_TIMEOUT, 40) ); // 2 seconds rotor start timout
+ // rotor start loop
+ sec_sequence.push_back( eSecCommand(eSecCommand::SLEEP, 50) ); // 50msec delay
+ sec_sequence.push_back( eSecCommand(eSecCommand::MEASURE_RUNNING_INPUTPOWER) );
+ cmd.direction=1; // check for running rotor
+ cmd.deltaA=rotor_param.m_inputpower_parameters.m_delta;
+ cmd.steps=+5;
+ cmd.okcount=0;
+ sec_sequence.push_back( eSecCommand(eSecCommand::IF_INPUTPOWER_DELTA_GOTO, cmd ) ); // check if rotor has started
+ sec_sequence.push_back( eSecCommand(eSecCommand::IF_TIMEOUT_GOTO, +2 ) ); // timeout .. we assume now the rotor is already at the correct position
+ sec_sequence.push_back( eSecCommand(eSecCommand::GOTO, -4) ); // goto loop start
+ sec_sequence.push_back( eSecCommand(eSecCommand::IF_NO_MORE_ROTOR_DISEQC_RETRYS_GOTO, turn_fast ? 10 : 9 ) ); // timeout .. we assume now the rotor is already at the correct position
+ sec_sequence.push_back( eSecCommand(eSecCommand::GOTO, -8) ); // goto loop start
+ ////////////////////
+ sec_sequence.push_back( eSecCommand(eSecCommand::SET_ROTOR_MOVING) );
+ if (turn_fast)
+ sec_sequence.push_back( eSecCommand(eSecCommand::SET_VOLTAGE, VOLTAGE(18)) );
+ sec_sequence.push_back( eSecCommand(eSecCommand::SET_TIMEOUT, m_params[MOTOR_RUNNING_TIMEOUT]*20) ); // 2 minutes running timeout
+ // rotor running loop
+ sec_sequence.push_back( eSecCommand(eSecCommand::SLEEP, 50) ); // wait 50msec
+ sec_sequence.push_back( eSecCommand(eSecCommand::MEASURE_RUNNING_INPUTPOWER) );
+ cmd.direction=0; // check for stopped rotor
+ cmd.steps=+3;
+ sec_sequence.push_back( eSecCommand(eSecCommand::IF_INPUTPOWER_DELTA_GOTO, cmd ) );
+ sec_sequence.push_back( eSecCommand(eSecCommand::IF_TIMEOUT_GOTO, +2 ) ); // timeout ? this should never happen
+ sec_sequence.push_back( eSecCommand(eSecCommand::GOTO, -4) ); // running loop start
+ /////////////////////
+ sec_sequence.push_back( eSecCommand(eSecCommand::UPDATE_CURRENT_ROTORPARAMS) );
+ sec_sequence.push_back( eSecCommand(eSecCommand::SET_ROTOR_STOPPED) );
+ }
+ else
+ { // use normal turning mode
+ doSetVoltageToneFrontend=false;
+ doSetFrontend=false;
+ eSecCommand::rotor cmd;
+ eSecCommand::pair compare;
+ compare.voltage = VOLTAGE(13);
+ compare.steps = +3;
+ sec_sequence.push_back( eSecCommand(eSecCommand::IF_VOLTAGE_GOTO, compare) );
+ sec_sequence.push_back( eSecCommand(eSecCommand::SET_VOLTAGE, compare.voltage) );
+ sec_sequence.push_back( eSecCommand(eSecCommand::SLEEP, m_params[DELAY_AFTER_VOLTAGE_CHANGE_BEFORE_MOTOR_CMD]) ); // wait 150msec after voltage change
+
+ sec_sequence.push_back( eSecCommand(eSecCommand::INVALIDATE_CURRENT_ROTORPARMS) );
+ sec_sequence.push_back( eSecCommand(eSecCommand::SET_ROTOR_MOVING) );
+ sec_sequence.push_back( eSecCommand(eSecCommand::SEND_DISEQC, diseqc) );
+
+ compare.voltage = voltage;
+ compare.steps = +3;
+ sec_sequence.push_back( eSecCommand(eSecCommand::IF_VOLTAGE_GOTO, compare) ); // correct final voltage?
+ sec_sequence.push_back( eSecCommand(eSecCommand::SLEEP, 2000) ); // wait 2 second before set high voltage
+ sec_sequence.push_back( eSecCommand(eSecCommand::SET_VOLTAGE, voltage) );
+
+ compare.tone = tone;
+ sec_sequence.push_back( eSecCommand(eSecCommand::IF_TONE_GOTO, compare) );
+ sec_sequence.push_back( eSecCommand(eSecCommand::SET_TONE, tone) );
+ sec_sequence.push_back( eSecCommand(eSecCommand::SLEEP, m_params[DELAY_AFTER_CONT_TONE]) );
+ sec_sequence.push_back( eSecCommand(eSecCommand::SET_FRONTEND) );
+
+ cmd.direction=1; // check for running rotor
+ cmd.deltaA=0;
+ cmd.steps=+3;
+ cmd.okcount=0;
+ sec_sequence.push_back( eSecCommand(eSecCommand::SET_TIMEOUT, m_params[MOTOR_RUNNING_TIMEOUT]*4) ); // 2 minutes running timeout
+ sec_sequence.push_back( eSecCommand(eSecCommand::SLEEP, 250) ); // 250msec delay
+ sec_sequence.push_back( eSecCommand(eSecCommand::IF_TUNER_LOCKED_GOTO, cmd ) );
+ sec_sequence.push_back( eSecCommand(eSecCommand::IF_TIMEOUT_GOTO, +3 ) );
+ sec_sequence.push_back( eSecCommand(eSecCommand::GOTO, -3) ); // goto loop start
+ sec_sequence.push_back( eSecCommand(eSecCommand::UPDATE_CURRENT_ROTORPARAMS) );
+ sec_sequence.push_back( eSecCommand(eSecCommand::SET_ROTOR_STOPPED) );
+ sec_sequence.push_back( eSecCommand(eSecCommand::GOTO, +3) );
+ sec_sequence.push_back( eSecCommand(eSecCommand::SET_FRONTEND) );
+ sec_sequence.push_back( eSecCommand(eSecCommand::GOTO, -4) );
+ }
}
sec_fe->setData(eDVBFrontend::NEW_ROTOR_CMD, RotorCmd);
sec_fe->setData(eDVBFrontend::NEW_ROTOR_POS, sat.orbital_position);
- sendDiSEqC = true;
}
}
}
csw = band;
}
- if (sendDiSEqC)
- sec_sequence.push_front( eSecCommand(eSecCommand::SET_POWER_LIMITING_MODE, eSecCommand::modeStatic) );
-
sec_fe->setData(eDVBFrontend::NEW_CSW, csw);
sec_fe->setData(eDVBFrontend::NEW_UCSW, ucsw);
sec_fe->setData(eDVBFrontend::NEW_TONEBURST, di_param.m_toneburst_param);
- if (doSetVoltageToneFrontend)
+ if ((doSetVoltageToneFrontend) && (lnb_param.SatCR_idx == -1))
{
eSecCommand::pair compare;
compare.voltage = voltage;
sec_sequence.push_back( eSecCommand(eSecCommand::UPDATE_CURRENT_SWITCHPARMS) );
+ if(lnb_param.SatCR_idx != -1)
+ {
+ // check if voltage is disabled
+ eSecCommand::pair compare;
+ compare.steps = +3;
+ compare.voltage = iDVBFrontend::voltageOff;
+ sec_sequence.push_back( eSecCommand(eSecCommand::IF_NOT_VOLTAGE_GOTO, compare) );
+ sec_sequence.push_back( eSecCommand(eSecCommand::SET_VOLTAGE, iDVBFrontend::voltage13) );
+ sec_sequence.push_back( eSecCommand(eSecCommand::SLEEP, 50 ) );
+
+ sec_sequence.push_back( eSecCommand(eSecCommand::SET_VOLTAGE, iDVBFrontend::voltage18_5) );
+ sec_sequence.push_back( eSecCommand(eSecCommand::SET_TONE, iDVBFrontend::toneOff) );
+ sec_sequence.push_back( eSecCommand(eSecCommand::SLEEP, m_params[DELAY_AFTER_VOLTAGE_CHANGE_BEFORE_MOTOR_CMD]) ); // wait 150msec after voltage change
+
+ eDVBDiseqcCommand diseqc;
+ memset(diseqc.data, 0, MAX_DISEQC_LENGTH);
+ diseqc.len = 5;
+ diseqc.data[0] = 0xE0;
+ diseqc.data[1] = 0x10;
+ diseqc.data[2] = 0x5A;
+ diseqc.data[3] = lnb_param.UnicableTuningWord >> 8;
+ diseqc.data[4] = lnb_param.UnicableTuningWord;
+
+ sec_sequence.push_back( eSecCommand(eSecCommand::SEND_DISEQC, diseqc) );
+ sec_sequence.push_back( eSecCommand(eSecCommand::SLEEP, m_params[DELAY_AFTER_LAST_DISEQC_CMD]) );
+ sec_sequence.push_back( eSecCommand(eSecCommand::SET_VOLTAGE, iDVBFrontend::voltage13) );
+ }
+
if (doSetFrontend)
{
sec_sequence.push_back( eSecCommand(eSecCommand::START_TUNE_TIMEOUT, tunetimeout) );
sec_sequence.push_back( eSecCommand(eSecCommand::SET_FRONTEND) );
}
-
- if (sendDiSEqC)
+
+ if (forceStaticMode)
+ {
+ sec_sequence.push_front( eSecCommand(eSecCommand::SET_POWER_LIMITING_MODE, eSecCommand::modeStatic) );
sec_sequence.push_back( eSecCommand(eSecCommand::SET_POWER_LIMITING_MODE, eSecCommand::modeDynamic) );
-
+ }
frontend.setSecSequence(sec_sequence);
return 0;
eDebugNoSimulate("found no useable satellite configuration for %s freq %d%s %s on orbital position (%d)",
sat.system ? "DVB-S2" : "DVB-S",
sat.frequency,
- sat.polarisation == eDVBFrontendParametersSatellite::Polarisation::Horizontal ? "H" :
- eDVBFrontendParametersSatellite::Polarisation::Vertical ? "V" :
- eDVBFrontendParametersSatellite::Polarisation::CircularLeft ? "CL" : "CR",
- sat.modulation == eDVBFrontendParametersSatellite::Modulation::Auto ? "AUTO" :
- eDVBFrontendParametersSatellite::Modulation::QPSK ? "QPSK" :
- eDVBFrontendParametersSatellite::Modulation::M8PSK ? "8PSK" : "QAM16",
+ sat.polarisation == eDVBFrontendParametersSatellite::Polarisation_Horizontal ? "H" :
+ eDVBFrontendParametersSatellite::Polarisation_Vertical ? "V" :
+ eDVBFrontendParametersSatellite::Polarisation_CircularLeft ? "CL" : "CR",
+ sat.modulation == eDVBFrontendParametersSatellite::Modulation_Auto ? "AUTO" :
+ eDVBFrontendParametersSatellite::Modulation_QPSK ? "QPSK" :
+ eDVBFrontendParametersSatellite::Modulation_8PSK ? "8PSK" : "QAM16",
sat.orbital_position );
return -1;
}
for (int i=0; i <= m_lnbidx; ++i)
{
m_lnbs[i].m_satellites.clear();
- m_lnbs[i].slot_mask = 0;
+ m_lnbs[i].m_slot_mask = 0;
+ m_lnbs[i].m_prio = -1; // auto
}
m_lnbidx=-1;
it->m_frontend->setData(eDVBFrontend::LINKED_NEXT_PTR, -1);
it->m_frontend->setData(eDVBFrontend::ROTOR_POS, -1);
it->m_frontend->setData(eDVBFrontend::ROTOR_CMD, -1);
+ it->m_frontend->setData(eDVBFrontend::SATCR, -1);
}
for (eSmartPtrList<eDVBRegisteredFrontend>::iterator it(m_avail_simulate_frontends.begin()); it != m_avail_simulate_frontends.end(); ++it)
it->m_frontend->setData(eDVBFrontend::LINKED_NEXT_PTR, -1);
it->m_frontend->setData(eDVBFrontend::ROTOR_POS, -1);
it->m_frontend->setData(eDVBFrontend::ROTOR_CMD, -1);
+ it->m_frontend->setData(eDVBFrontend::SATCR, -1);
}
return 0;
{
eSecDebug("eDVBSatelliteEquipmentControl::setLNBSlotMask(%d)", slotmask);
if ( currentLNBValid() )
- m_lnbs[m_lnbidx].slot_mask = slotmask;
+ m_lnbs[m_lnbidx].m_slot_mask = slotmask;
else
return -ENOENT;
return 0;
return 0;
}
+RESULT eDVBSatelliteEquipmentControl::setLNBPrio(int prio)
+{
+ eSecDebug("eDVBSatelliteEquipmentControl::setLNBPrio(%d)", prio);
+ if ( currentLNBValid() )
+ m_lnbs[m_lnbidx].m_prio = prio;
+ else
+ return -ENOENT;
+ return 0;
+}
+
+RESULT eDVBSatelliteEquipmentControl::setLNBNum(int LNBNum)
+{
+ eSecDebug("eDVBSatelliteEquipmentControl::setLNBNum(%d)", LNBNum);
+ if(!((LNBNum >= 1) && (LNBNum <= MAX_LNBNUM)))
+ return -EPERM;
+ if ( currentLNBValid() )
+ m_lnbs[m_lnbidx].LNBNum = LNBNum;
+ else
+ return -ENOENT;
+ return 0;
+}
+
/* DiSEqC Specific Parameters */
RESULT eDVBSatelliteEquipmentControl::setDiSEqCMode(int diseqcmode)
{
return 0;
}
+/* Unicable Specific Parameters */
+RESULT eDVBSatelliteEquipmentControl::setLNBSatCR(int SatCR_idx)
+{
+ eSecDebug("eDVBSatelliteEquipmentControl::setLNBSatCR(%d)", SatCR_idx);
+ if(!((SatCR_idx >=-1) && (SatCR_idx < MAX_SATCR)))
+ return -EPERM;
+ if ( currentLNBValid() )
+ m_lnbs[m_lnbidx].SatCR_idx = SatCR_idx;
+ else
+ return -ENOENT;
+ return 0;
+}
+
+RESULT eDVBSatelliteEquipmentControl::setLNBSatCRvco(int SatCRvco)
+{
+ eSecDebug("eDVBSatelliteEquipmentControl::setLNBSatCRvco(%d)", SatCRvco);
+ if(!((SatCRvco >= 950*1000) && (SatCRvco <= 2150*1000)))
+ return -EPERM;
+ if(!((m_lnbs[m_lnbidx].SatCR_idx >= 0) && (m_lnbs[m_lnbidx].SatCR_idx < MAX_SATCR)))
+ return -ENOENT;
+ if ( currentLNBValid() )
+ m_lnbs[m_lnbidx].SatCRvco = SatCRvco;
+ else
+ return -ENOENT;
+ return 0;
+}
+RESULT eDVBSatelliteEquipmentControl::getLNBSatCR()
+{
+ if ( currentLNBValid() )
+ return m_lnbs[m_lnbidx].SatCR_idx;
+ return -ENOENT;
+}
+
+RESULT eDVBSatelliteEquipmentControl::getLNBSatCRvco()
+{
+ if ( currentLNBValid() )
+ return m_lnbs[m_lnbidx].SatCRvco;
+ return -ENOENT;
+}
+
/* Satellite Specific Parameters */
RESULT eDVBSatelliteEquipmentControl::addSatellite(int orbital_position)
{