#include <lib/dvb/dvb.h>
#include <lib/dvb/sec.h>
#include <lib/dvb/rotor_calc.h>
+#include <lib/dvb/dvbtime.h>
#include <set>
setRotorPosNum(1); // stored pos 1
}
-static void checkLinkedParams(int direction, int &linked_ptr, int &ret, const eDVBFrontendParametersSatellite &sat, int csw, int ucsw, int toneburst, bool diseqc, bool rotor, int RotorPos)
+static void checkLinkedParams(int direction, long &linked_ptr, int &ret, const eDVBFrontendParametersSatellite &sat, int csw, int ucsw, int toneburst, bool diseqc, bool rotor, int RotorPos)
{
eDVBRegisteredFrontend *linked_fe = (eDVBRegisteredFrontend*) linked_ptr;
if (linked_fe->m_inuse)
{
- int ocsw = -1,
+ long ocsw = -1,
oucsw = -1,
oToneburst = -1;
linked_fe->m_frontend->getData(eDVBFrontend::CSW, ocsw);
// else
// eDebug("OK .. can tune this transponder with linked tuner in use :)");
}
- linked_fe->m_frontend->getData(direction, linked_ptr);
+ linked_fe->m_frontend->getData(direction, (long&)linked_ptr);
}
int eDVBSatelliteEquipmentControl::canTune(const eDVBFrontendParametersSatellite &sat, iDVBFrontend *fe, int slot_id )
lnb_param.m_satellites.find(sat.orbital_position);
if ( sit != lnb_param.m_satellites.end())
{
- int band=0,
+ long band=0,
linked_prev_ptr=-1,
linked_next_ptr=-1,
satpos_depends_ptr=-1,
return ret;
}
+bool need_turn_fast(int turn_speed)
+{
+ if (turn_speed == eDVBSatelliteRotorParameters::FAST)
+ return true;
+ else if (turn_speed != eDVBSatelliteRotorParameters::SLOW)
+ {
+ int begin = turn_speed >> 16; // high word is start time
+ int end = turn_speed&0xFFFF; // low word is end time
+ time_t now_time = ::time(0);
+ tm nowTime;
+ localtime_r(&now_time, &nowTime);
+ int now = (nowTime.tm_hour + 1) * 60 + nowTime.tm_min + 1;
+ bool neg = end <= begin;
+ if (neg) {
+ int tmp = begin;
+ begin = end;
+ end = tmp;
+ }
+ if ((now >= begin && now < end) ^ neg)
+ return true;
+ }
+ return false;
+}
+
#define VOLTAGE(x) (lnb_param.m_increased_voltage ? iDVBFrontend::voltage##x##_5 : iDVBFrontend::voltage##x)
-RESULT eDVBSatelliteEquipmentControl::prepare(iDVBFrontend &frontend, FRONTENDPARAMETERS &parm, const eDVBFrontendParametersSatellite &sat, int slot_id)
+RESULT eDVBSatelliteEquipmentControl::prepare(iDVBFrontend &frontend, FRONTENDPARAMETERS &parm, const eDVBFrontendParametersSatellite &sat, int slot_id, unsigned int tunetimeout)
{
for (int idx=0; idx <= m_lnbidx; ++idx )
{
bool doSetFrontend = true;
bool doSetVoltageToneFrontend = m_not_linked_slot_mask & slot_id;
bool allowDiseqc1_2 = true;
- int band=0,
+ long band=0,
voltage = iDVBFrontend::voltageOff,
tone = iDVBFrontend::toneOff,
csw = di_param.m_committed_cmd,
for ( int i = 0; i < loops;) // fill commands...
{
eDVBDiseqcCommand diseqc;
+ memset(diseqc.data, 0, MAX_DISEQC_LENGTH);
diseqc.len = 4;
diseqc.data[0] = i ? 0xE1 : 0xE0;
diseqc.data[1] = 0x10;
}
}
- eDebug("RotorCmd %02x, lastRotorCmd %02x", RotorCmd, lastRotorCmd);
+ eDebug("RotorCmd %02x, lastRotorCmd %02lx", RotorCmd, lastRotorCmd);
if ( RotorCmd != -1 && RotorCmd != lastRotorCmd )
{
eSecCommand::pair compare;
sec_sequence.push_back( eSecCommand(eSecCommand::SLEEP, m_params[DELAY_BETWEEN_SWITCH_AND_MOTOR_CMD]) ); // wait 700ms when diseqc changed
eDVBDiseqcCommand diseqc;
+ memset(diseqc.data, 0, MAX_DISEQC_LENGTH);
diseqc.len = 3;
diseqc.data[0] = 0xE0;
diseqc.data[1] = 0x31; // positioner
sec_sequence.push_back( eSecCommand(eSecCommand::IF_NO_MORE_ROTOR_DISEQC_RETRYS_GOTO, +9 ) ); // timeout .. we assume now the rotor is already at the correct position
sec_sequence.push_back( eSecCommand(eSecCommand::GOTO, -8) ); // goto loop start
////////////////////
- sec_sequence.push_back( eSecCommand(eSecCommand::SET_VOLTAGE, VOLTAGE(18)) );
+ if (need_turn_fast(rotor_param.m_inputpower_parameters.m_turning_speed))
+ sec_sequence.push_back( eSecCommand(eSecCommand::SET_VOLTAGE, VOLTAGE(18)) );
sec_sequence.push_back( eSecCommand(eSecCommand::SET_TIMEOUT, m_params[MOTOR_RUNNING_TIMEOUT]*20) ); // 2 minutes running timeout
// rotor running loop
sec_sequence.push_back( eSecCommand(eSecCommand::SLEEP, 50) ); // wait 50msec
if (doSetFrontend)
{
- sec_sequence.push_back( eSecCommand(eSecCommand::START_TUNE_TIMEOUT) );
+ sec_sequence.push_back( eSecCommand(eSecCommand::START_TUNE_TIMEOUT, tunetimeout) );
sec_sequence.push_back( eSecCommand(eSecCommand::SET_FRONTEND) );
}
frontend.setSecSequence(sec_sequence);
//reset some tuner configuration
for (eSmartPtrList<eDVBRegisteredFrontend>::iterator it(m_avail_frontends.begin()); it != m_avail_frontends.end(); ++it)
{
+ long tmp;
+ if (!strcmp(it->m_frontend->getDescription(), "BCM4501 (internal)") && !it->m_frontend->getData(eDVBFrontend::LINKED_PREV_PTR, tmp) && tmp != -1)
+ {
+ FILE *f=fopen("/proc/stb/tsmux/lnb_b_input", "w");
+ if (!f || fwrite("B", 1, 1, f) != 1)
+ eDebug("set /proc/stb/tsmux/lnb_b_input to B failed!! (%m)");
+ else
+ {
+ eDebug("set /proc/stb/tsmux/lnb_b_input to B OK");
+ fclose(f);
+ }
+ }
it->m_frontend->setData(eDVBFrontend::SATPOS_DEPENDS_PTR, -1);
it->m_frontend->setData(eDVBFrontend::LINKED_PREV_PTR, -1);
it->m_frontend->setData(eDVBFrontend::LINKED_NEXT_PTR, -1);
return 0;
}
+RESULT eDVBSatelliteEquipmentControl::setRotorTurningSpeed(int speed)
+{
+ eSecDebug("eDVBSatelliteEquipmentControl::setRotorTurningSpeed(%d)", speed);
+ if ( currentLNBValid() )
+ m_lnbs[m_lnbidx].m_rotor_parameters.m_inputpower_parameters.m_turning_speed = speed;
+ else
+ return -ENOENT;
+ return 0;
+}
+
struct sat_compare
{
int orb_pos, lofl, lofh;
do
{
- int tmp;
+ long tmp;
p1->m_frontend->getData(eDVBFrontend::LINKED_PREV_PTR, tmp);
if (tmp != -1)
p1 = (eDVBRegisteredFrontend*)tmp;
do
{
- int tmp;
+ long tmp;
p2->m_frontend->getData(eDVBFrontend::LINKED_PREV_PTR, tmp);
if (tmp != -1)
p2 = (eDVBRegisteredFrontend*)tmp;
if (p1 != p2)
{
- int tmp1=-1;
- int tmp2=-1;
+ long tmp1=-1;
+ long tmp2=-1;
// check for rotor dependency
p1->m_frontend->getData(eDVBFrontend::SATPOS_DEPENDS_PTR, tmp1);
if (tmp1 != -1)
}
if (p1 && p2)
{
- p1->m_frontend->setData(eDVBFrontend::LINKED_PREV_PTR, (int)p2);
- p2->m_frontend->setData(eDVBFrontend::LINKED_NEXT_PTR, (int)p1);
+ p1->m_frontend->setData(eDVBFrontend::LINKED_PREV_PTR, (long)p2);
+ p2->m_frontend->setData(eDVBFrontend::LINKED_NEXT_PTR, (long)p1);
+ if (!strcmp(p1->m_frontend->getDescription(), p2->m_frontend->getDescription()) && !strcmp(p1->m_frontend->getDescription(), "BCM4501 (internal)"))
+ {
+ FILE *f=fopen("/proc/stb/tsmux/lnb_b_input", "w");
+ if (!f || fwrite("A", 1, 1, f) != 1)
+ eDebug("set /proc/stb/tsmux/lnb_b_input to A failed!! (%m)");
+ else
+ {
+ eDebug("set /proc/stb/tsmux/lnb_b_input to A OK");
+ fclose(f);
+ }
+ }
return 0;
}
}
}
if (p1 && p2)
{
- p1->m_frontend->setData(eDVBFrontend::SATPOS_DEPENDS_PTR, (int)p2);
- p2->m_frontend->setData(eDVBFrontend::SATPOS_DEPENDS_PTR, (int)p1);
+ p1->m_frontend->setData(eDVBFrontend::SATPOS_DEPENDS_PTR, (long)p2);
+ p2->m_frontend->setData(eDVBFrontend::SATPOS_DEPENDS_PTR, (long)p1);
return 0;
}
return -1;