DEFINE_REF(eDVBSatelliteEquipmentControl);
+eDVBSatelliteEquipmentControl *eDVBSatelliteEquipmentControl::instance;
+
eDVBSatelliteEquipmentControl::eDVBSatelliteEquipmentControl()
:m_lnbidx(-1), m_curSat(m_lnbs[0].m_satellites.end())
{
+ if (!instance)
+ instance = this;
+
clear();
// ASTRA
setLNBTunerMask(1);
setLNBLOFL(9750000);
setLNBThreshold(11750000);
- setLNBLOFH(10600000);
+ setLNBLOFH(10607000);
setDiSEqCMode(eDVBSatelliteDiseqcParameters::V1_0);
setToneburst(eDVBSatelliteDiseqcParameters::NO);
setRepeats(0);
- setCommittedCommand(eDVBSatelliteDiseqcParameters::AA);
+ setCommittedCommand(eDVBSatelliteDiseqcParameters::BB);
setCommandOrder(0); // committed, toneburst
setFastDiSEqC(false);
+ setSeqRepeat(false);
addSatellite(192);
setVoltageMode(eDVBSatelliteSwitchParameters::HV);
setToneMode(eDVBSatelliteSwitchParameters::HILO);
setCommittedCommand(eDVBSatelliteDiseqcParameters::AB);
setCommandOrder(0); // committed, toneburst
setFastDiSEqC(false);
+ setSeqRepeat(false);
addSatellite(130);
setVoltageMode(eDVBSatelliteSwitchParameters::HV);
setToneMode(eDVBSatelliteSwitchParameters::HILO);
compare.steps = +3;
sec_sequence.push_back( eSecCommand(eSecCommand::IF_VOLTAGE_GOTO, compare) ); // voltage already correct ?
sec_sequence.push_back( eSecCommand(eSecCommand::SET_VOLTAGE, voltage) );
- sec_sequence.push_back( eSecCommand(eSecCommand::SLEEP, 50) );
- }
-
- if ( di_param.m_command_order & 1 && // toneburst at begin of sequence
- changed_burst && di_param.m_toneburst_param != eDVBSatelliteDiseqcParameters::NO )
- {
- sec_sequence.push_back( eSecCommand(eSecCommand::SEND_TONEBURST, di_param.m_toneburst_param) );
sec_sequence.push_back( eSecCommand(eSecCommand::SLEEP, 50) );
- frontend.setData(2, di_param.m_toneburst_param);
}
- if ( send_diseqc )
+ for (int seq_repeat = 0; seq_repeat < (di_param.m_seq_repeat?2:1); ++seq_repeat)
{
- int loops=0;
+ if ( di_param.m_command_order & 1 && // toneburst at begin of sequence
+ changed_burst && di_param.m_toneburst_param != eDVBSatelliteDiseqcParameters::NO )
+ {
+ sec_sequence.push_back( eSecCommand(eSecCommand::SEND_TONEBURST, di_param.m_toneburst_param) );
+ sec_sequence.push_back( eSecCommand(eSecCommand::SLEEP, 50) );
+ frontend.setData(2, di_param.m_toneburst_param);
+ }
- if ( send_csw )
- ++loops;
- if ( send_ucsw )
- ++loops;
+ if ( send_diseqc )
+ {
+ int loops=0;
- for ( int i=0; i < di_param.m_repeats; ++i )
- loops *= 2;
+ if ( send_csw )
+ ++loops;
+ if ( send_ucsw )
+ ++loops;
- for ( int i = 0; i < loops;) // fill commands...
- {
- eDVBDiseqcCommand diseqc;
- diseqc.len = 4;
- diseqc.data[0] = i ? 0xE1 : 0xE0;
- diseqc.data[1] = 0x10;
+ for ( int i=0; i < di_param.m_repeats; ++i )
+ loops *= 2;
- if ( !send_csw || (send_ucsw && (di_param.m_command_order & 4) ) )
+ for ( int i = 0; i < loops;) // fill commands...
{
- diseqc.data[2] = 0x39;
- diseqc.data[3] = ucsw;
- }
- else
- {
- diseqc.data[2] = 0x38;
- diseqc.data[3] = csw;
- }
- sec_sequence.push_back( eSecCommand(eSecCommand::SEND_DISEQC, diseqc) );
+ eDVBDiseqcCommand diseqc;
+ diseqc.len = 4;
+ diseqc.data[0] = i ? 0xE1 : 0xE0;
+ diseqc.data[1] = 0x10;
- i++;
- if ( i < loops )
- {
- int cmd=0;
- if (diseqc.data[2] == 0x38 && send_ucsw)
- cmd=0x39;
- else if (diseqc.data[2] == 0x39 && send_csw)
- cmd=0x38;
- if (cmd)
+ if ( !send_csw || (send_ucsw && (di_param.m_command_order & 4) ) )
{
- static int delay = (120 - 54) / 2; // standard says 100msek between two repeated commands
- sec_sequence.push_back( eSecCommand(eSecCommand::SLEEP, delay) );
- diseqc.data[2]=cmd;
- diseqc.data[3]=(cmd==0x38) ? csw : ucsw;
- sec_sequence.push_back( eSecCommand(eSecCommand::SEND_DISEQC, diseqc) );
- ++i;
- if ( i < loops )
- sec_sequence.push_back( eSecCommand(eSecCommand::SLEEP, delay ) );
- else
- sec_sequence.push_back( eSecCommand(eSecCommand::SLEEP, 50) );
+ diseqc.data[2] = 0x39;
+ diseqc.data[3] = ucsw;
}
- else // delay 120msek when no command is in repeat gap
- sec_sequence.push_back( eSecCommand(eSecCommand::SLEEP, 120) );
- }
- else
- sec_sequence.push_back( eSecCommand(eSecCommand::SLEEP, 50) );
+ else
+ {
+ diseqc.data[2] = 0x38;
+ diseqc.data[3] = csw;
+ }
+ sec_sequence.push_back( eSecCommand(eSecCommand::SEND_DISEQC, diseqc) );
+
+ i++;
+ if ( i < loops )
+ {
+ int cmd=0;
+ if (diseqc.data[2] == 0x38 && send_ucsw)
+ cmd=0x39;
+ else if (diseqc.data[2] == 0x39 && send_csw)
+ cmd=0x38;
+ if (cmd)
+ {
+ static int delay = (120 - 54) / 2; // standard says 100msek between two repeated commands
+ sec_sequence.push_back( eSecCommand(eSecCommand::SLEEP, delay) );
+ diseqc.data[2]=cmd;
+ diseqc.data[3]=(cmd==0x38) ? csw : ucsw;
+ sec_sequence.push_back( eSecCommand(eSecCommand::SEND_DISEQC, diseqc) );
+ ++i;
+ if ( i < loops )
+ sec_sequence.push_back( eSecCommand(eSecCommand::SLEEP, delay ) );
+ else
+ sec_sequence.push_back( eSecCommand(eSecCommand::SLEEP, 50) );
+ }
+ else // delay 120msek when no command is in repeat gap
+ sec_sequence.push_back( eSecCommand(eSecCommand::SLEEP, 120) );
+ }
+ else
+ sec_sequence.push_back( eSecCommand(eSecCommand::SLEEP, 50) );
- frontend.setData(0, csw);
- frontend.setData(1, ucsw);
+ frontend.setData(0, csw);
+ frontend.setData(1, ucsw);
+ }
}
- }
- if ( !(di_param.m_command_order & 1) && // toneburst at end of sequence
- (changed_burst || send_diseqc) && di_param.m_toneburst_param != eDVBSatelliteDiseqcParameters::NO )
- {
- sec_sequence.push_back( eSecCommand(eSecCommand::SEND_TONEBURST, di_param.m_toneburst_param) );
- sec_sequence.push_back( eSecCommand(eSecCommand::SLEEP, 50) );
- frontend.setData(2, di_param.m_toneburst_param);
+ if ( !(di_param.m_command_order & 1) && // toneburst at end of sequence
+ (changed_burst || send_diseqc) && di_param.m_toneburst_param != eDVBSatelliteDiseqcParameters::NO )
+ {
+ sec_sequence.push_back( eSecCommand(eSecCommand::SEND_TONEBURST, di_param.m_toneburst_param) );
+ sec_sequence.push_back( eSecCommand(eSecCommand::SLEEP, 50) );
+ frontend.setData(2, di_param.m_toneburst_param);
+ }
}
if ( di_param.m_diseqc_mode == eDVBSatelliteDiseqcParameters::V1_2 )
eDVBSatelliteRotorParameters::EAST;
double SatLon = abs(sat.orbital_position)/10.00,
- SiteLat = rotor_param.m_gotoxx_parameters.m_latitude,
- SiteLon = rotor_param.m_gotoxx_parameters.m_longitude;
+ SiteLat = rotor_param.m_gotoxx_parameters.m_latitude,
+ SiteLon = rotor_param.m_gotoxx_parameters.m_longitude;
if ( rotor_param.m_gotoxx_parameters.m_la_direction == eDVBSatelliteRotorParameters::SOUTH )
SiteLat = -SiteLat;
// override first voltage change
*(++(++sec_sequence.begin()))=eSecCommand(eSecCommand::SET_VOLTAGE, iDVBFrontend::voltage13);
// wait 1 second after first switch diseqc command
- sec_sequence.push_back( eSecCommand(eSecCommand::SLEEP, 1000) );
+ sec_sequence.push_back( eSecCommand(eSecCommand::SLEEP, 1000) );
}
else // no other diseqc commands before
{
sec_sequence.push_back( eSecCommand(eSecCommand::SET_TONE, iDVBFrontend::toneOff) );
- sec_sequence.push_back( eSecCommand(eSecCommand::SLEEP, 15) ); // wait 50msec after voltage change
+ sec_sequence.push_back( eSecCommand(eSecCommand::SLEEP, 15) ); // wait 15msec after tone change
eSecCommand::pair compare;
compare.voltage = voltage;
compare.steps = +3;
cmd.steps=+3;
cmd.okcount=0;
sec_sequence.push_back( eSecCommand(eSecCommand::IF_INPUTPOWER_DELTA_GOTO, cmd ) ); // check if rotor has started
- sec_sequence.push_back( eSecCommand(eSecCommand::IF_TIMEOUT_GOTO, +11 ) ); // timeout ?
+ sec_sequence.push_back( eSecCommand(eSecCommand::IF_TIMEOUT_GOTO, +10 ) ); // timeout .. we assume now the rotor is already at the correct position
sec_sequence.push_back( eSecCommand(eSecCommand::GOTO, -4) ); // goto loop start
////////////////////
sec_sequence.push_back( eSecCommand(eSecCommand::SET_TIMEOUT, 2400) ); // 2 minutes running timeout
cmd.direction=0; // check for stopped rotor
cmd.steps=+3;
sec_sequence.push_back( eSecCommand(eSecCommand::IF_INPUTPOWER_DELTA_GOTO, cmd ) );
- sec_sequence.push_back( eSecCommand(eSecCommand::IF_TIMEOUT_GOTO, +3 ) ); // timeout ?
+ sec_sequence.push_back( eSecCommand(eSecCommand::IF_TIMEOUT_GOTO, +3 ) ); // timeout ? this should never happen
sec_sequence.push_back( eSecCommand(eSecCommand::GOTO, -4) ); // running loop start
/////////////////////
sec_sequence.push_back( eSecCommand(eSecCommand::UPDATE_CURRENT_ROTORPARAMS) );
return 0;
}
+RESULT eDVBSatelliteEquipmentControl::setSeqRepeat(bool onoff)
+{
+ if ( currentLNBValid() )
+ m_lnbs[m_lnbidx].m_diseqc_parameters.m_seq_repeat = onoff;
+ else
+ return -ENOENT;
+ return 0;
+}
+
/* Rotor Specific Parameters */
RESULT eDVBSatelliteEquipmentControl::setLongitude(float longitude)
{
git.cweiske.de / enigma2.git / blobdiff