from Screen import Screen
+from Screens.DefaultWizard import DefaultWizard
from ServiceScan import ServiceScan
from Components.config import config, ConfigSubsection, ConfigSelection, \
ConfigYesNo, ConfigInteger, getConfigListEntry, ConfigSlider, ConfigEnableDisable
from Components.ConfigList import ConfigListScreen
from Components.NimManager import nimmanager, getConfigSatlist
from Components.Label import Label
+from Tools.Directories import resolveFilename, SCOPE_DEFAULTPARTITIONMOUNTDIR, SCOPE_DEFAULTDIR, SCOPE_DEFAULTPARTITION
from Screens.MessageBox import MessageBox
from enigma import eTimer, eDVBFrontendParametersSatellite, eComponentScan, \
eDVBSatelliteEquipmentControl, eDVBFrontendParametersTerrestrial, \
inversion=2, bandwidth = 3, fechigh = 6, feclow = 6,
modulation = 2, transmission = 2, guard = 4,
hierarchy = 4):
-
# print "freq", frequency, "inv", inversion, "bw", bandwidth, "fech", fechigh, "fecl", feclow, "mod", modulation, "tm", transmission, "guard", guard, "hierarchy", hierarchy
-
- # WARNING: normally, enums are working directly.
- # Don't copy this (very bad)!! Instead either fix swig (good) or
- # move this into a central place.
- Bw8MHz = 0
- Bw7MHz = 1
- Bw6MHz = 2
- #Bw5MHz = 3 #not implemented for e1 compatibilty
- BwAuto = 3
-
- f1_2 = 0
- f2_3 = 1
- f3_4 = 2
- f5_6 = 3
- f7_8 = 4
- fAuto = 5
-
- TM2k = 0
- TM8k = 1
- #TM4k = 2 #not implemented for e1 compatibilty
- TMAuto = 2
-
- GI_1_32 = 0
- GI_1_16 = 1
- GI_1_8 = 2
- GI_1_4 = 3
- GI_Auto = 4
-
- HNone = 0
- H1 = 1
- H2 = 2
- H4 = 3
- HAuto = 4
-
- QPSK = 0
- QAM16 = 1
- QAM64 = 2
- Auto = 3
-
- Off = 0
- On = 1
- Unknown = 2
-
parm = eDVBFrontendParametersTerrestrial()
-
parm.frequency = frequency
-
- parm.inversion = [Off, On, Unknown][inversion]
- parm.bandwidth = [Bw8MHz, Bw7MHz, Bw6MHz, BwAuto][bandwidth] # Bw5MHz unsupported
- parm.code_rate_HP = [f1_2, f2_3, f3_4, f5_6, f7_8, fAuto][fechigh]
- parm.code_rate_LP = [f1_2, f2_3, f3_4, f5_6, f7_8, fAuto][feclow]
- parm.modulation = [QPSK, QAM16, QAM64, Auto][modulation]
- parm.transmission_mode = [TM2k, TM8k, TMAuto][transmission] # TM4k unsupported
- parm.guard_interval = [GI_1_32, GI_1_16, GI_1_8, GI_1_4, GI_Auto][guard]
- parm.hierarchy = [HNone, H1, H2, H4, HAuto][hierarchy]
-
+ parm.inversion = inversion
+ parm.bandwidth = bandwidth
+ parm.code_rate_HP = fechigh
+ parm.code_rate_LP = feclow
+ parm.modulation = modulation
+ parm.transmission_mode = transmission
+ parm.guard_interval = guard
+ parm.hierarchy = hierarchy
return parm
def getInitialTransponderList(tlist, pos):
parm.symbol_rate = x[2]
parm.modulation = x[3]
parm.fec_inner = x[4]
- parm.inversion = 2 # AUTO
+ parm.inversion = parm.Inversion_Unknown
#print "frequency:", x[1]
#print "symbol_rate:", x[2]
#print "modulation:", x[3]
def cableTransponderSearchSessionClosed(self, *val):
print "cableTransponderSearchSessionClosed, val", val
- self.cable_search_container.appClosed.get().remove(self.cableTransponderSearchClosed)
- self.cable_search_container.dataAvail.get().remove(self.getCableTransponderData)
+ self.cable_search_container.appClosed.remove(self.cableTransponderSearchClosed)
+ self.cable_search_container.dataAvail.remove(self.getCableTransponderData)
self.cable_search_container = None
self.cable_search_session = None
if val and len(val) and val[0]:
if len(data):
if data[0] == 'OK':
print str
- qam = { "QAM16" : 1, "QAM32" : 2, "QAM64" : 3, "QAM128" : 4, "QAM256" : 5 }
- inv = { "INVERSION_OFF" : 0, "INVERSION_ON" : 1 }
- fec = { "FEC_AUTO" : 0, "FEC_1_2" : 1, "FEC_2_3" : 2, "FEC_3_4" : 3, "FEC_5_6": 4, "FEC_7_8" : 5, "FEC_8_9" : 6, "FEC_NONE" : 15 }
parm = eDVBFrontendParametersCable()
+ qam = { "QAM16" : parm.Modulation_QAM16,
+ "QAM32" : parm.Modulation_QAM32,
+ "QAM64" : parm.Modulation_QAM64,
+ "QAM128" : parm.Modulation_QAM128,
+ "QAM256" : parm.Modulation_QAM256 }
+ inv = { "INVERSION_OFF" : parm.Inversion_Off,
+ "INVERSION_ON" : parm.Inversion_On,
+ "INVERSION_AUTO" : parm.Inversion_Unknown }
+ fec = { "FEC_AUTO" : parm.FEC_Auto,
+ "FEC_1_2" : parm.FEC_1_2,
+ "FEC_2_3" : parm.FEC_2_3,
+ "FEC_3_4" : parm.FEC_3_4,
+ "FEC_5_6": parm.FEC_5_6,
+ "FEC_7_8" : parm.FEC_7_8,
+ "FEC_8_9" : parm.FEC_8_9,
+ "FEC_NONE" : parm.FEC_None }
parm.frequency = int(data[1])
parm.symbol_rate = int(data[2])
parm.fec_inner = fec[data[3]]
return
self.__tlist = [ ]
self.cable_search_container = eConsoleAppContainer()
- self.cable_search_container.appClosed.get().append(self.cableTransponderSearchClosed)
- self.cable_search_container.dataAvail.get().append(self.getCableTransponderData)
+ self.cable_search_container.appClosed.append(self.cableTransponderSearchClosed)
+ self.cable_search_container.dataAvail.append(self.getCableTransponderData)
cableConfig = config.Nims[nim_idx].cable
- cmd = "tda1002x --init --scan --verbose --wakeup --inv 2 --bus "
+ tunername = nimmanager.getNimName(nim_idx)
+ if tunername == "CXD1981":
+ cmd = "cxd1978 --init --scan --verbose --wakeup --inv 2 --bus "
+ else:
+ cmd = "tda1002x --init --scan --verbose --wakeup --inv 2 --bus "
#FIXMEEEEEE hardcoded i2c devices for dm7025 and dm8000
if nim_idx < 2:
cmd += str(nim_idx)
tmpstr += "\n\n..."
self.cable_search_session = self.session.openWithCallback(self.cableTransponderSearchSessionClosed, MessageBox, tmpstr, MessageBox.TYPE_INFO)
+class DefaultSatLists(DefaultWizard):
+ def __init__(self, session, silent = True, showSteps = False):
+ self.xmlfile = "defaultsatlists.xml"
+ DefaultWizard.__init__(self, session, silent, showSteps, neededTag = "services")
+ print "configuredSats:", nimmanager.getConfiguredSats()
+
+ def setDirectory(self):
+ self.directory = []
+ self.directory.append(resolveFilename(SCOPE_DEFAULTDIR))
+ import os
+ os.system("mount %s %s" % (resolveFilename(SCOPE_DEFAULTPARTITION), resolveFilename(SCOPE_DEFAULTPARTITIONMOUNTDIR)))
+ self.directory.append(resolveFilename(SCOPE_DEFAULTPARTITIONMOUNTDIR))
+
+ def statusCallback(self, status, progress):
+ print "statusCallback:", status, progress
+ from Components.DreamInfoHandler import DreamInfoHandler
+ if status == DreamInfoHandler.STATUS_DONE:
+ self["text"].setText(_("The installation of the default services lists is finished.") + "\n\n" + _("Please press OK to continue."))
+ self.markDone()
+ self.disableKeys = False
+
class ScanSetup(ConfigListScreen, Screen, CableTransponderSearchSupport):
def __init__(self, session):
Screen.__init__(self, session)
self.list = []
ConfigListScreen.__init__(self, self.list)
- self.createSetup()
-
- self["introduction"] = Label(_("Press OK to start the scan"))
+ if not self.scan_nims.value == "":
+ self.createSetup()
+ self["introduction"] = Label(_("Press OK to start the scan"))
+ else:
+ self["introduction"] = Label(_("Nothing to scan!\nPlease setup your tuner settings before you start a service scan."))
def runAsync(self, finished_cb):
self.finished_cb = finished_cb
self.typeOfScanEntry = getConfigListEntry(_("Type of scan"), self.scan_typeterrestrial)
self.list.append(self.typeOfScanEntry)
+ self.scan_networkScan.value = False
if nim.isCompatible("DVB-S"):
if self.scan_type.value == "single_transponder":
self.updateSatList()
self.list.append(self.systemEntry)
else:
# downgrade to dvb-s, in case a -s2 config was active
- self.scan_sat.system.value = "dvb-s"
+ self.scan_sat.system.value = eDVBFrontendParametersSatellite.System_DVB_S
self.list.append(getConfigListEntry(_('Satellite'), self.scan_satselection[index_to_scan]))
self.list.append(getConfigListEntry(_('Frequency'), self.scan_sat.frequency))
self.list.append(getConfigListEntry(_('Inversion'), self.scan_sat.inversion))
self.list.append(getConfigListEntry(_('Symbol Rate'), self.scan_sat.symbolrate))
self.list.append(getConfigListEntry(_("Polarity"), self.scan_sat.polarization))
- if self.scan_sat.system.value == "dvb-s":
+ if self.scan_sat.system.value == eDVBFrontendParametersSatellite.System_DVB_S:
self.list.append(getConfigListEntry(_("FEC"), self.scan_sat.fec))
- elif self.scan_sat.system.value == "dvb-s2":
+ elif self.scan_sat.system.value == eDVBFrontendParametersSatellite.System_DVB_S2:
self.list.append(getConfigListEntry(_("FEC"), self.scan_sat.fec_s2))
self.modulationEntry = getConfigListEntry(_('Modulation'), self.scan_sat.modulation)
self.list.append(self.modulationEntry)
self.list.append(getConfigListEntry(_('Rolloff'), self.scan_sat.rolloff))
- if self.scan_sat.modulation.value == "8psk":
- self.list.append(getConfigListEntry(_('Pilot'), self.scan_sat.pilot))
- self.list.append(getConfigListEntry(_("Network scan"), self.scan_networkScan))
+ self.list.append(getConfigListEntry(_('Pilot'), self.scan_sat.pilot))
elif self.scan_type.value == "single_satellite":
self.updateSatList()
print self.scan_satselection[index_to_scan]
self.list.append(getConfigListEntry(_("Satellite"), self.scan_satselection[index_to_scan]))
- self.list.append(getConfigListEntry(_("Clear before scan"), self.scan_clearallservices))
- elif self.scan_type.value == "multisat":
- # if (norotor)
+ self.scan_networkScan.value = True
+ elif self.scan_type.value.find("multisat") != -1:
tlist = []
SatList = nimmanager.getSatListForNim(index_to_scan)
- self.list.append(getConfigListEntry(_("Clear before scan"), self.scan_clearallservices))
for x in SatList:
if self.Satexists(tlist, x[0]) == 0:
tlist.append(x[0])
- sat = ConfigEnableDisable(default = True)
+ sat = ConfigEnableDisable(default = self.scan_type.value.find("_yes") != -1 and True or False)
configEntry = getConfigListEntry(nimmanager.getSatDescription(x[0]), sat)
self.list.append(configEntry)
self.multiscanlist.append((x[0], sat))
- # if (rotor):
- # for sat in nimmanager.satList:
- # self.list.append(getConfigListEntry(sat[1], self.scan_scansat[sat[0]]))
+ self.scan_networkScan.value = True
elif nim.isCompatible("DVB-C"):
if self.scan_typecable.value == "single_transponder":
self.list.append(getConfigListEntry(_("Frequency"), self.scan_cab.frequency))
self.list.append(getConfigListEntry(_("Symbol Rate"), self.scan_cab.symbolrate))
self.list.append(getConfigListEntry(_("Modulation"), self.scan_cab.modulation))
self.list.append(getConfigListEntry(_("FEC"), self.scan_cab.fec))
- self.list.append(getConfigListEntry(_("Network scan"), self.scan_networkScan))
- elif self.scan_typecable.value == "complete":
- self.list.append(getConfigListEntry(_("Clear before scan"), self.scan_clearallservices))
elif nim.isCompatible("DVB-T"):
if self.scan_typeterrestrial.value == "single_transponder":
self.list.append(getConfigListEntry(_("Frequency"), self.scan_ter.frequency))
self.list.append(getConfigListEntry(_("Transmission mode"), self.scan_ter.transmission))
self.list.append(getConfigListEntry(_("Guard interval mode"), self.scan_ter.guard))
self.list.append(getConfigListEntry(_("Hierarchy mode"), self.scan_ter.hierarchy))
- self.list.append(getConfigListEntry(_("Network scan"), self.scan_networkScan))
- elif self.scan_typeterrestrial.value == "complete":
- self.list.append(getConfigListEntry(_("Clear before scan"), self.scan_clearallservices))
-
-# if (nim.isCompatible("DVB-S") and self.scan_type.type == "single_transponder") or \
-# (nim.isCompatbile("DVB-C") and self.scan_typecable.type == "single_transponder") or \
-# (nim.isCompatible("DVB-T") and self.scan_typeterrestrial.type == "single_transponder"):
-# self.configElementSNR = getConfigListEntry(_("SNR"), self.scan_snr)
-# self.list.append(self.configElementSNR)
-# self.configElementACG = getConfigListEntry(_("AGC"), self.scan_agc)
-# self.list.append(self.configElementACG)
-# self.configElementBER = getConfigListEntry(_("BER"), self.scan_ber)
-# self.list.append(self.configElementBER)
-# self.statusTimer.start(500, False)
-# else:
-# self.statusTimer.stop()
-
+ self.list.append(getConfigListEntry(_("Network scan"), self.scan_networkScan))
+ self.list.append(getConfigListEntry(_("Clear before scan"), self.scan_clearallservices))
+ self.list.append(getConfigListEntry(_("Only Free scan"), self.scan_onlyfree))
self["config"].list = self.list
self["config"].l.setList(self.list)
if cur == self.typeOfScanEntry or \
cur == self.tunerEntry or \
cur == self.systemEntry or \
- (self.modulationEntry and self.systemEntry[1].value == "dvb-s2" and cur == self.modulationEntry):
+ (self.modulationEntry and self.systemEntry[1].value == eDVBFrontendParametersSatellite.System_DVB_S2 and cur == self.modulationEntry):
self.createSetup()
def createConfig(self, frontendData):
#("Transmission Mode", frontendData["transmission_mode"], TYPE_TEXT),
#("Guard Interval", frontendData["guard_interval"], TYPE_TEXT),
#("Hierarchy Inform.", frontendData["hierarchy_information"], TYPE_TEXT),
- defaultSat = { "orbpos": 192, "system": "dvb-s", "frequency": 11836, "inversion": "auto", "symbolrate": 27500, "polarization": "horizontal", "fec": "auto", "fec_s2": "9_10", "modulation": "qpsk" }
- defaultCab = {"frequency": 466, "inversion": "auto", "modulation": "64qam", "fec": "auto", "symbolrate": 6900}
+ defaultSat = {
+ "orbpos": 192,
+ "system": eDVBFrontendParametersSatellite.System_DVB_S,
+ "frequency": 11836,
+ "inversion": eDVBFrontendParametersSatellite.Inversion_Unknown,
+ "symbolrate": 27500,
+ "polarization": eDVBFrontendParametersSatellite.Polarisation_Horizontal,
+ "fec": eDVBFrontendParametersSatellite.FEC_Auto,
+ "fec_s2": eDVBFrontendParametersSatellite.FEC_9_10,
+ "modulation": eDVBFrontendParametersSatellite.Modulation_QPSK }
+ defaultCab = {
+ "frequency": 466,
+ "inversion": eDVBFrontendParametersCable.Inversion_Unknown,
+ "modulation": eDVBFrontendParametersCable.Modulation_QAM64,
+ "fec": eDVBFrontendParametersCable.FEC_Auto,
+ "symbolrate": 6900 }
+ defaultTer = {
+ "frequency" : 466000,
+ "inversion" : eDVBFrontendParametersTerrestrial.Inversion_Unknown,
+ "bandwidth" : eDVBFrontendParametersTerrestrial.Bandwidth_7MHz,
+ "fechigh" : eDVBFrontendParametersTerrestrial.FEC_Auto,
+ "feclow" : eDVBFrontendParametersTerrestrial.FEC_Auto,
+ "modulation" : eDVBFrontendParametersTerrestrial.Modulation_Auto,
+ "transmission_mode" : eDVBFrontendParametersTerrestrial.TransmissionMode_Auto,
+ "guard_interval" : eDVBFrontendParametersTerrestrial.GuardInterval_Auto,
+ "hierarchy": eDVBFrontendParametersTerrestrial.Hierarchy_Auto }
+
if frontendData is not None:
ttype = frontendData.get("tuner_type", "UNKNOWN")
if ttype == "DVB-S":
- defaultSat["system"] = {"DVB-S": "dvb-s", "DVB-S2": "dvb-s2"}[frontendData.get("system", "DVB-S")]
- defaultSat["frequency"] = int(frontendData.get("frequency", 0) / 1000)
- defaultSat["inversion"] = {"INVERSION_OFF": "off", "INVERSION_ON": "on", "INVERSION_AUTO": "auto"}[frontendData.get("inversion", "INVERSION_AUTO")]
- defaultSat["symbolrate"] = int(frontendData.get("symbol_rate", 0) / 1000)
- defaultSat["polarization"] = {"HORIZONTAL": "horizontal", "VERTICAL": "vertical", "CIRCULAR_LEFT": "circular_left", "CIRCULAR_RIGHT": "circular_right", "UNKNOWN": None}[frontendData.get("polarization", "HORIZONTAL")]
-
- if frontendData.get("system", "DVB-S") == "DVB-S2":
- defaultSat["fec_s2"] = {"FEC_1_2": "1_2", "FEC_2_3": "2_3", "FEC_3_4": "3_4", "FEC_4_5": "4_5", "FEC_5_6": "5_6", "FEC_7_8": "7_8", "FEC_8_9": "8_9", "FEC_9_10": "9_10"} \
- [frontendData.get("fec_inner", "FEC_AUTO")]
- defaultSat["rolloff"] = {"ROLLOFF_0_35" : "0_35", "ROLLOFF_0_25" : "0_25", "0_20" : "ROLLOFF_0_20"}[frontendData.get("rolloff", "ROLLOFF_0_35")]
- defaultSat["pilot"] = {"PILOT_ON" : "on", "PILOT_OFF" : "off", "PILOT_AUTO" : "auto"}[frontendData.get("pilot", "PILOT_AUTO")]
+ defaultSat["system"] = frontendData.get("system", eDVBFrontendParametersSatellite.System_DVB_S)
+ defaultSat["frequency"] = frontendData.get("frequency", 0) / 1000
+ defaultSat["inversion"] = frontendData.get("inversion", eDVBFrontendParametersSatellite.Inversion_Unknown)
+ defaultSat["symbolrate"] = frontendData.get("symbol_rate", 0) / 1000
+ defaultSat["polarization"] = frontendData.get("polarization", eDVBFrontendParametersSatellite.Polarisation_Horizontal)
+ if defaultSat["system"] == eDVBFrontendParametersSatellite.System_DVB_S2:
+ defaultSat["fec_s2"] = frontendData.get("fec_inner", eDVBFrontendParametersSatellite.FEC_Auto)
+ defaultSat["rolloff"] = frontendData.get("rolloff", eDVBFrontendParametersSatellite.RollOff_alpha_0_35)
+ defaultSat["pilot"] = frontendData.get("pilot", eDVBFrontendParametersSatellite.Pilot_Unknown)
else:
- defaultSat["fec"] = {"FEC_AUTO": "auto", "FEC_1_2": "1_2", "FEC_2_3": "2_3", "FEC_3_4": "3_4", "FEC_5_6": "5_6", "FEC_7_8": "7_8", "FEC_NONE": "none"} \
- [frontendData.get("fec_inner", "FEC_AUTO")]
-
- defaultSat["modulation"] = {"QPSK": "qpsk", "8PSK": "8psk"}[frontendData.get("modulation", "QPSK")]
+ defaultSat["fec"] = frontendData.get("fec_inner", eDVBFrontendParametersSatellite.FEC_Auto)
+ defaultSat["modulation"] = frontendData.get("modulation", eDVBFrontendParametersSatellite.Modulation_QPSK)
defaultSat["orbpos"] = frontendData.get("orbital_position", 0)
elif ttype == "DVB-C":
- defaultCab["frequency"] = int(frontendData.get("frequency", 0) / 1000)
- defaultCab["symbolrate"] = int(frontendData.get("symbol_rate", 0) / 1000)
- defaultCab["inversion"] = {"INVERSION_OFF": "off", "INVERSION_ON": "on", "INVERSION_AUTO": "auto"}[frontendData.get("inversion", "INVERSION_AUTO")]
- defaultCab["fec"] = {"FEC_AUTO": "auto", "FEC_1_2": "1_2", "FEC_2_3": "2_3", "FEC_3_4": "3_4", "FEC_5_6": "5_6", "FEC_7_8": "7_8", "FEC_8_9": "8_9", "FEC_NONE": "none"}[frontendData.get("fec_inner", "FEC_AUTO")]
- defaultCab["modulation"] = {"QAM_AUTO": "auto", "QAM_16": "16qam", "QAM_32": "32qam", "QAM_64": "64qam", "QAM_128": "128qam", "QAM_256": "256qam"}[frontendData.get("modulation", "QAM_16")]
+ defaultCab["frequency"] = frontendData.get("frequency", 0) / 1000
+ defaultCab["symbolrate"] = frontendData.get("symbol_rate", 0) / 1000
+ defaultCab["inversion"] = frontendData.get("inversion", eDVBFrontendParametersCable.Inversion_Unknown)
+ defaultCab["fec"] = frontendData.get("fec_inner", eDVBFrontendParametersCable.FEC_Auto)
+ defaultCab["modulation"] = frontendData.get("modulation", eDVBFrontendParametersCable.Modulation_QAM16)
+ elif ttype == "DVB-T":
+ defaultTer["frequency"] = frontendData.get("frequency", 0)
+ defaultTer["inversion"] = frontendData.get("inversion", eDVBFrontendParametersTerrestrial.Inversion_Unknown)
+ defaultTer["bandwidth"] = frontendData.get("bandwidth", eDVBFrontendParametersTerrestrial.Bandwidth_7MHz)
+ defaultTer["fechigh"] = frontendData.get("code_rate_hp", eDVBFrontendParametersTerrestrial.FEC_Auto)
+ defaultTer["feclow"] = frontendData.get("code_rate_lp", eDVBFrontendParametersTerrestrial.FEC_Auto)
+ defaultTer["modulation"] = frontendData.get("constellation", eDVBFrontendParametersTerrestrial.Modulation_Auto)
+ defaultTer["transmission_mode"] = frontendData.get("transmission_mode", eDVBFrontendParametersTerrestrial.TransmissionMode_Auto)
+ defaultTer["guard_interval"] = frontendData.get("guard_interval", eDVBFrontendParametersTerrestrial.GuardInterval_Auto)
+ defaultTer["hierarchy"] = frontendData.get("hierarchy_information", eDVBFrontendParametersTerrestrial.Hierarchy_Auto)
self.scan_sat = ConfigSubsection()
self.scan_cab = ConfigSubsection()
self.scan_ter = ConfigSubsection()
- self.scan_type = ConfigSelection(default = "single_transponder", choices = [("single_transponder", _("Single transponder")), ("single_satellite", _("Single satellite")), ("multisat", _("Multisat"))])
+ self.scan_type = ConfigSelection(default = "single_transponder", choices = [("single_transponder", _("Single transponder")), ("single_satellite", _("Single satellite")), ("multisat", _("Multisat")), ("multisat_yes", _("Multisat"))])
self.scan_typecable = ConfigSelection(default = "single_transponder", choices = [("single_transponder", _("Single transponder")), ("complete", _("Complete"))])
self.scan_typeterrestrial = ConfigSelection(default = "single_transponder", choices = [("single_transponder", _("Single transponder")), ("complete", _("Complete"))])
self.scan_clearallservices = ConfigSelection(default = "no", choices = [("no", _("no")), ("yes", _("yes")), ("yes_hold_feeds", _("yes (keep feeds)"))])
+ self.scan_onlyfree = ConfigYesNo(default = False)
self.scan_networkScan = ConfigYesNo(default = False)
nim_list = []
# collect all nims which are *not* set to "nothing"
for n in nimmanager.nim_slots:
- if n.config_mode != "nothing":
- nim_list.append((str(n.slot), n.friendly_full_description))
+ if n.config_mode == "nothing":
+ continue
+ if n.config_mode == "advanced" and len(nimmanager.getSatListForNim(n.slot)) < 1:
+ continue
+ if n.config_mode in ("loopthrough", "satposdepends"):
+ root_id = nimmanager.sec.getRoot(n.slot_id, int(n.config.connectedTo.value))
+ if n.type == nimmanager.nim_slots[root_id].type: # check if connected from a DVB-S to DVB-S2 Nim or vice versa
+ continue
+ nim_list.append((str(n.slot), n.friendly_full_description))
self.scan_nims = ConfigSelection(choices = nim_list)
self.scan_ber.enabled = False
# sat
- self.scan_sat.system = ConfigSelection(default = defaultSat["system"], choices = [("dvb-s", _("DVB-S")), ("dvb-s2", _("DVB-S2"))])
+ self.scan_sat.system = ConfigSelection(default = defaultSat["system"], choices = [
+ (eDVBFrontendParametersSatellite.System_DVB_S, _("DVB-S")),
+ (eDVBFrontendParametersSatellite.System_DVB_S2, _("DVB-S2"))])
self.scan_sat.frequency = ConfigInteger(default = defaultSat["frequency"], limits = (1, 99999))
- self.scan_sat.inversion = ConfigSelection(default = defaultSat["inversion"], choices = [("off", _("off")), ("on", _("on")), ("auto", _("Auto"))])
+ self.scan_sat.inversion = ConfigSelection(default = defaultSat["inversion"], choices = [
+ (eDVBFrontendParametersSatellite.Inversion_Off, _("off")),
+ (eDVBFrontendParametersSatellite.Inversion_On, _("on")),
+ (eDVBFrontendParametersSatellite.Inversion_Unknown, _("Auto"))])
self.scan_sat.symbolrate = ConfigInteger(default = defaultSat["symbolrate"], limits = (1, 99999))
- self.scan_sat.polarization = ConfigSelection(default = defaultSat["polarization"], choices = [("horizontal", _("horizontal")), ("vertical", _("vertical")), ("circular_left", _("circular left")), ("circular_right", _("circular right"))])
- self.scan_sat.fec = ConfigSelection(default = defaultSat["fec"], choices = [("auto", _("Auto")), ("1_2", "1/2"), ("2_3", "2/3"), ("3_4", "3/4"), ("5_6", "5/6"), ("7_8", "7/8"), ("none", _("None"))])
- self.scan_sat.fec_s2 = ConfigSelection(default = defaultSat["fec_s2"], choices = [("1_2", "1/2"), ("2_3", "2/3"), ("3_4", "3/4"), ("3_5", "3/5"), ("4_5", "4/5"), ("5_6", "5/6"), ("7_8", "7/8"), ("8_9", "8/9"), ("9_10", "9/10")])
- self.scan_sat.modulation = ConfigSelection(default = defaultSat["modulation"], choices = [("qpsk", "QPSK"), ("8psk", "8PSK")])
- self.scan_sat.rolloff = ConfigSelection(default = defaultSat.get("rolloff", "0_35"), choices = [("0_35", "0.35"), ("0_25", "0.25"), ("0_20", "0.20")])
- self.scan_sat.pilot = ConfigSelection(default = defaultSat.get("pilot", "auto"), choices = [("off", _("off")), ("on", _("on")), ("auto", _("Auto"))])
+ self.scan_sat.polarization = ConfigSelection(default = defaultSat["polarization"], choices = [
+ (eDVBFrontendParametersSatellite.Polarisation_Horizontal, _("horizontal")),
+ (eDVBFrontendParametersSatellite.Polarisation_Vertical, _("vertical")),
+ (eDVBFrontendParametersSatellite.Polarisation_CircularLeft, _("circular left")),
+ (eDVBFrontendParametersSatellite.Polarisation_CircularRight, _("circular right"))])
+ self.scan_sat.fec = ConfigSelection(default = defaultSat["fec"], choices = [
+ (eDVBFrontendParametersSatellite.FEC_Auto, _("Auto")),
+ (eDVBFrontendParametersSatellite.FEC_1_2, "1/2"),
+ (eDVBFrontendParametersSatellite.FEC_2_3, "2/3"),
+ (eDVBFrontendParametersSatellite.FEC_3_4, "3/4"),
+ (eDVBFrontendParametersSatellite.FEC_5_6, "5/6"),
+ (eDVBFrontendParametersSatellite.FEC_7_8, "7/8"),
+ (eDVBFrontendParametersSatellite.FEC_None, _("None"))])
+ self.scan_sat.fec_s2 = ConfigSelection(default = defaultSat["fec_s2"], choices = [
+ (eDVBFrontendParametersSatellite.FEC_1_2, "1/2"),
+ (eDVBFrontendParametersSatellite.FEC_2_3, "2/3"),
+ (eDVBFrontendParametersSatellite.FEC_3_4, "3/4"),
+ (eDVBFrontendParametersSatellite.FEC_3_5, "3/5"),
+ (eDVBFrontendParametersSatellite.FEC_4_5, "4/5"),
+ (eDVBFrontendParametersSatellite.FEC_5_6, "5/6"),
+ (eDVBFrontendParametersSatellite.FEC_7_8, "7/8"),
+ (eDVBFrontendParametersSatellite.FEC_8_9, "8/9"),
+ (eDVBFrontendParametersSatellite.FEC_9_10, "9/10")])
+ self.scan_sat.modulation = ConfigSelection(default = defaultSat["modulation"], choices = [
+ (eDVBFrontendParametersSatellite.Modulation_QPSK, "QPSK"),
+ (eDVBFrontendParametersSatellite.Modulation_8PSK, "8PSK")])
+ self.scan_sat.rolloff = ConfigSelection(default = defaultSat.get("rolloff", eDVBFrontendParametersSatellite.RollOff_alpha_0_35), choices = [
+ (eDVBFrontendParametersSatellite.RollOff_alpha_0_35, "0.35"),
+ (eDVBFrontendParametersSatellite.RollOff_alpha_0_25, "0.25"),
+ (eDVBFrontendParametersSatellite.RollOff_alpha_0_20, "0.20")])
+ self.scan_sat.pilot = ConfigSelection(default = defaultSat.get("pilot", eDVBFrontendParametersSatellite.Pilot_Unknown), choices = [
+ (eDVBFrontendParametersSatellite.Pilot_Off, _("off")),
+ (eDVBFrontendParametersSatellite.Pilot_On, _("on")),
+ (eDVBFrontendParametersSatellite.Pilot_Unknown, _("Auto"))])
# cable
self.scan_cab.frequency = ConfigInteger(default = defaultCab["frequency"], limits = (50, 999))
- self.scan_cab.inversion = ConfigSelection(default = defaultCab["inversion"], choices = [("off", _("off")), ("on", _("on")), ("auto", _("Auto"))])
- self.scan_cab.modulation = ConfigSelection(default = defaultCab["modulation"], choices = [("16qam", "16-QAM"), ("32qam", "32-QAM"), ("64qam", "64-QAM"), ("128qam", "128-QAM"), ("256qam", "256-QAM")])
- self.scan_cab.fec = ConfigSelection(default = defaultCab["fec"], choices = [("auto", _("Auto")), ("1_2", "1/2"), ("2_3", "2/3"), ("3_4", "3/4"), ("5_6", "5/6"), ("7_8", "7/8"), ("8_9", "8/9"), ("none", _("None"))])
+ self.scan_cab.inversion = ConfigSelection(default = defaultCab["inversion"], choices = [
+ (eDVBFrontendParametersCable.Inversion_Off, _("off")),
+ (eDVBFrontendParametersCable.Inversion_On, _("on")),
+ (eDVBFrontendParametersCable.Inversion_Unknown, _("Auto"))])
+ self.scan_cab.modulation = ConfigSelection(default = defaultCab["modulation"], choices = [
+ (eDVBFrontendParametersCable.Modulation_QAM16, "16-QAM"),
+ (eDVBFrontendParametersCable.Modulation_QAM32, "32-QAM"),
+ (eDVBFrontendParametersCable.Modulation_QAM64, "64-QAM"),
+ (eDVBFrontendParametersCable.Modulation_QAM128, "128-QAM"),
+ (eDVBFrontendParametersCable.Modulation_QAM256, "256-QAM")])
+ self.scan_cab.fec = ConfigSelection(default = defaultCab["fec"], choices = [
+ (eDVBFrontendParametersCable.FEC_Auto, _("Auto")),
+ (eDVBFrontendParametersCable.FEC_1_2, "1/2"),
+ (eDVBFrontendParametersCable.FEC_2_3, "2/3"),
+ (eDVBFrontendParametersCable.FEC_3_4, "3/4"),
+ (eDVBFrontendParametersCable.FEC_5_6, "5/6"),
+ (eDVBFrontendParametersCable.FEC_7_8, "7/8"),
+ (eDVBFrontendParametersCable.FEC_8_9, "8/9"),
+ (eDVBFrontendParametersCable.FEC_None, _("None"))])
self.scan_cab.symbolrate = ConfigInteger(default = defaultCab["symbolrate"], limits = (1, 99999))
# terrestial
self.scan_ter.frequency = ConfigInteger(default = 466000, limits = (50000, 999000))
- self.scan_ter.inversion = ConfigSelection(default = "auto", choices = [("off", _("off")), ("on", _("on")), ("auto", _("Auto"))])
+ self.scan_ter.inversion = ConfigSelection(default = defaultTer["inversion"], choices = [
+ (eDVBFrontendParametersTerrestrial.Inversion_Off, _("off")),
+ (eDVBFrontendParametersTerrestrial.Inversion_On, _("on")),
+ (eDVBFrontendParametersTerrestrial.Inversion_Unknown, _("Auto"))])
# WORKAROUND: we can't use BW-auto
- self.scan_ter.bandwidth = ConfigSelection(default = "8MHz", choices = [("8MHz", "8MHz"), ("7MHz", "7MHz"), ("6MHz", "6MHz")])
- #, ("auto", _("Auto"))))
- self.scan_ter.fechigh = ConfigSelection(default = "auto", choices = [("1_2", "1/2"), ("2_3", "2/3"), ("3_4", "3/4"), ("5_6", "5/6"), ("7_8", "7/8"), ("auto", _("Auto"))])
- self.scan_ter.feclow = ConfigSelection(default = "auto", choices = [("1_2", "1/2"), ("2_3", "2/3"), ("3_4", "3/4"), ("5_6", "5/6"), ("7_8", "7/8"), ("auto", _("Auto"))])
- self.scan_ter.modulation = ConfigSelection(default = "auto", choices = [("qpsk", "QPSK"), ("qam16", "QAM16"), ("qam64", "QAM64"), ("auto", _("Auto"))])
- self.scan_ter.transmission = ConfigSelection(default = "auto", choices = [("2k", "2K"), ("8k", "8K"), ("auto", _("Auto"))])
- self.scan_ter.guard = ConfigSelection(default = "auto", choices = [("1_32", "1/32"), ("1_16", "1/16"), ("1_8", "1/8"), ("1_4", "1/4"), ("auto", _("Auto"))])
- self.scan_ter.hierarchy = ConfigSelection(default = "auto", choices = [("none", _("None")), ("1", "1"), ("2", "2"), ("4", "4"), ("auto", _("Auto"))])
+ self.scan_ter.bandwidth = ConfigSelection(default = defaultTer["bandwidth"], choices = [
+ (eDVBFrontendParametersTerrestrial.Bandwidth_8MHz, "8MHz"),
+ (eDVBFrontendParametersTerrestrial.Bandwidth_7MHz, "7MHz"),
+ (eDVBFrontendParametersTerrestrial.Bandwidth_6MHz, "6MHz")])
+ #, (eDVBFrontendParametersTerrestrial.Bandwidth_Auto, _("Auto"))))
+ self.scan_ter.fechigh = ConfigSelection(default = defaultTer["fechigh"], choices = [
+ (eDVBFrontendParametersTerrestrial.FEC_1_2, "1/2"),
+ (eDVBFrontendParametersTerrestrial.FEC_2_3, "2/3"),
+ (eDVBFrontendParametersTerrestrial.FEC_3_4, "3/4"),
+ (eDVBFrontendParametersTerrestrial.FEC_5_6, "5/6"),
+ (eDVBFrontendParametersTerrestrial.FEC_7_8, "7/8"),
+ (eDVBFrontendParametersTerrestrial.FEC_Auto, _("Auto"))])
+ self.scan_ter.feclow = ConfigSelection(default = defaultTer["feclow"], choices = [
+ (eDVBFrontendParametersTerrestrial.FEC_1_2, "1/2"),
+ (eDVBFrontendParametersTerrestrial.FEC_2_3, "2/3"),
+ (eDVBFrontendParametersTerrestrial.FEC_3_4, "3/4"),
+ (eDVBFrontendParametersTerrestrial.FEC_5_6, "5/6"),
+ (eDVBFrontendParametersTerrestrial.FEC_7_8, "7/8"),
+ (eDVBFrontendParametersTerrestrial.FEC_Auto, _("Auto"))])
+ self.scan_ter.modulation = ConfigSelection(default = defaultTer["modulation"], choices = [
+ (eDVBFrontendParametersTerrestrial.Modulation_QPSK, "QPSK"),
+ (eDVBFrontendParametersTerrestrial.Modulation_QAM16, "QAM16"),
+ (eDVBFrontendParametersTerrestrial.Modulation_QAM64, "QAM64"),
+ (eDVBFrontendParametersTerrestrial.Modulation_Auto, _("Auto"))])
+ self.scan_ter.transmission = ConfigSelection(default = defaultTer["transmission_mode"], choices = [
+ (eDVBFrontendParametersTerrestrial.TransmissionMode_2k, "2K"),
+ (eDVBFrontendParametersTerrestrial.TransmissionMode_8k, "8K"),
+ (eDVBFrontendParametersTerrestrial.TransmissionMode_Auto, _("Auto"))])
+ self.scan_ter.guard = ConfigSelection(default = defaultTer["guard_interval"], choices = [
+ (eDVBFrontendParametersTerrestrial.GuardInterval_1_32, "1/32"),
+ (eDVBFrontendParametersTerrestrial.GuardInterval_1_16, "1/16"),
+ (eDVBFrontendParametersTerrestrial.GuardInterval_1_8, "1/8"),
+ (eDVBFrontendParametersTerrestrial.GuardInterval_1_4, "1/4"),
+ (eDVBFrontendParametersTerrestrial.GuardInterval_Auto, _("Auto"))])
+ self.scan_ter.hierarchy = ConfigSelection(default = defaultTer["hierarchy"], choices = [
+ (eDVBFrontendParametersTerrestrial.Hierarchy_None, _("None")),
+ (eDVBFrontendParametersTerrestrial.Hierarchy_1, "1"),
+ (eDVBFrontendParametersTerrestrial.Hierarchy_2, "2"),
+ (eDVBFrontendParametersTerrestrial.Hierarchy_4, "4"),
+ (eDVBFrontendParametersTerrestrial.Hierarchy_Auto, _("Auto"))])
self.scan_scansat = {}
for sat in nimmanager.satList:
self.scan_satselection = []
for slot in nimmanager.nim_slots:
if slot.isCompatible("DVB-S"):
- self.scan_satselection.append(getConfigSatlist(int(defaultSat["orbpos"]), self.satList[slot.slot]))
+ self.scan_satselection.append(getConfigSatlist(defaultSat["orbpos"], self.satList[slot.slot]))
else:
self.scan_satselection.append(None)
def updateStatus(self):
print "updatestatus"
- fecmap = { "auto": 0,
- "1_2": 1,
- "2_3": 2,
- "3_4": 3,
- "5_6": 4,
- "7_8": 5,
- "8_9": 6,
- "3_5": 7,
- "4_5": 8,
- "9_10": 9,
- "none": 15
- }
-
def addSatTransponder(self, tlist, frequency, symbol_rate, polarisation, fec, inversion, orbital_position, system, modulation, rolloff, pilot):
- print "Add Sat: frequ: " + str(frequency) + " symbol: " + str(symbol_rate) + " pol: " + str(polarisation) + " fec: " + str(self.fecmap[fec]) + " inversion: " + str(inversion) + " modulation: " + str(modulation) + " system: " + str(system) + " rolloff" + str(rolloff) + " pilot" + str(pilot)
+ print "Add Sat: frequ: " + str(frequency) + " symbol: " + str(symbol_rate) + " pol: " + str(polarisation) + " fec: " + str(fec) + " inversion: " + str(inversion) + " modulation: " + str(modulation) + " system: " + str(system) + " rolloff" + str(rolloff) + " pilot" + str(pilot)
print "orbpos: " + str(orbital_position)
parm = eDVBFrontendParametersSatellite()
- if modulation == 1:
- parm.modulation = 2 # eDVBFrontendParametersSatellite.Modulation.8PSK
- else:
- parm.modulation = 1 # eDVBFrontendParametersSatellite.Modulation.QPSK
+ parm.modulation = modulation
parm.system = system
parm.frequency = frequency * 1000
parm.symbol_rate = symbol_rate * 1000
parm.polarisation = polarisation
- parm.fec = self.fecmap[fec]
+ parm.fec = fec
parm.inversion = inversion
- parm.orbital_position = int(orbital_position)
- parm.rolloff = int(rolloff)
- parm.pilot = int(pilot)
+ parm.orbital_position = orbital_position
+ parm.rolloff = rolloff
+ parm.pilot = pilot
tlist.append(parm)
def addCabTransponder(self, tlist, frequency, symbol_rate, modulation, fec, inversion):
parm.frequency = frequency * 1000
parm.symbol_rate = symbol_rate * 1000
parm.modulation = modulation
- parm.fec = self.fecmap[fec]
+ parm.fec = fec
parm.inversion = inversion
tlist.append(parm)
tlist.append(buildTerTransponder(*args, **kwargs))
def keyGo(self):
+ if self.scan_nims.value == "":
+ return
tlist = []
flags = None
- extFlags = True
-
startScan = True
+ removeAll = True
index_to_scan = int(self.scan_nims.value)
if self.scan_nims == [ ]:
# however, the satList itself could be empty. in that case, "index" is 0 (for "None").
if len(nimsats):
orbpos = nimsats[selsatidx][0]
- if self.scan_sat.system.value == "dvb-s":
+ if self.scan_sat.system.value == eDVBFrontendParametersSatellite.System_DVB_S:
fec = self.scan_sat.fec.value
else:
fec = self.scan_sat.fec_s2.value
print "add sat transponder"
self.addSatTransponder(tlist, self.scan_sat.frequency.value,
self.scan_sat.symbolrate.value,
- self.scan_sat.polarization.index,
+ self.scan_sat.polarization.value,
fec,
- self.scan_sat.inversion.index,
+ self.scan_sat.inversion.value,
orbpos,
- self.scan_sat.system.index,
- self.scan_sat.modulation.index,
- self.scan_sat.rolloff.index,
- self.scan_sat.pilot.index)
- flags = self.scan_networkScan.value and eComponentScan.scanNetworkSearch or 0
- extFlags = False
+ self.scan_sat.system.value,
+ self.scan_sat.modulation.value,
+ self.scan_sat.rolloff.value,
+ self.scan_sat.pilot.value)
+ removeAll = False
elif self.scan_type.value == "single_satellite":
sat = self.satList[index_to_scan][self.scan_satselection[index_to_scan].index]
getInitialTransponderList(tlist, sat[0])
- elif self.scan_type.value == "multisat":
+ elif self.scan_type.value.find("multisat") != -1:
SatList = nimmanager.getSatListForNim(index_to_scan)
for x in self.multiscanlist:
if x[1].value:
elif nim.isCompatible("DVB-C"):
if self.scan_typecable.value == "single_transponder":
- fec = self.scan_cab.fec.value
self.addCabTransponder(tlist, self.scan_cab.frequency.value,
self.scan_cab.symbolrate.value,
- self.scan_cab.modulation.index + 1,
- fec,
- self.scan_cab.inversion.index)
- flags = self.scan_networkScan.value and eComponentScan.scanNetworkSearch or 0
- extFlags = False
+ self.scan_cab.modulation.value,
+ self.scan_cab.fec.value,
+ self.scan_cab.inversion.value)
+ removeAll = False
elif self.scan_typecable.value == "complete":
if config.Nims[index_to_scan].cable.scan_type.value == "provider":
getInitialCableTransponderList(tlist, index_to_scan)
if self.scan_typeterrestrial.value == "single_transponder":
self.addTerTransponder(tlist,
self.scan_ter.frequency.value * 1000,
- inversion = self.scan_ter.inversion.index,
- bandwidth = self.scan_ter.bandwidth.index,
- fechigh = self.scan_ter.fechigh.index,
- feclow = self.scan_ter.feclow.index,
- modulation = self.scan_ter.modulation.index,
- transmission = self.scan_ter.transmission.index,
- guard = self.scan_ter.guard.index,
- hierarchy = self.scan_ter.hierarchy.index)
- flags = self.scan_networkScan.value and eComponentScan.scanNetworkSearch or 0
- extFlags = False
+ inversion = self.scan_ter.inversion.value,
+ bandwidth = self.scan_ter.bandwidth.value,
+ fechigh = self.scan_ter.fechigh.value,
+ feclow = self.scan_ter.feclow.value,
+ modulation = self.scan_ter.modulation.value,
+ transmission = self.scan_ter.transmission.value,
+ guard = self.scan_ter.guard.value,
+ hierarchy = self.scan_ter.hierarchy.value)
+ removeAll = False
elif self.scan_typeterrestrial.value == "complete":
getInitialTerrestrialTransponderList(tlist, nimmanager.getTerrestrialDescription(index_to_scan))
- if flags is None:
- flags = eComponentScan.scanNetworkSearch
+ flags = self.scan_networkScan.value and eComponentScan.scanNetworkSearch or 0
+
+ tmp = self.scan_clearallservices.value
+ if tmp == "yes":
+ flags |= eComponentScan.scanRemoveServices
+ elif tmp == "yes_hold_feeds":
+ flags |= eComponentScan.scanRemoveServices
+ flags |= eComponentScan.scanDontRemoveFeeds
+
+ if tmp != "no" and not removeAll:
+ flags |= eComponentScan.scanDontRemoveUnscanned
- if extFlags:
- tmp = self.scan_clearallservices.value
- if tmp == "yes":
- flags |= eComponentScan.scanRemoveServices
- elif tmp == "yes_hold_feeds":
- flags |= eComponentScan.scanRemoveServices
- flags |= eComponentScan.scanDontRemoveFeeds
+ if self.scan_onlyfree.value:
+ flags |= eComponentScan.scanOnlyFree
for x in self["config"].list:
x[1].save()
def getNetworksForNim(self, nim):
if nim.isCompatible("DVB-S"):
networks = nimmanager.getSatListForNim(nim.slot)
-# the original code took "loopthrough" etc. into account. Do we need this?
-# if nimmanager.getNimConfigMode(1) in ["loopthrough", "satposdepends", "equal", "nothing"]:
-# return False
-# sec = eDVBSatelliteEquipmentControl.getInstance()
-# if sec is not None:
-# exclusive_satellites = sec.get_exclusive_satellites(0,1)
-# if len(exclusive_satellites) == 2:
-# return False
-# idx = exclusive_satellites[0]+1
-# exclusive_nim_sats = exclusive_satellites[idx+1:idx+1+exclusive_satellites[idx]]
-# if len(exclusive_nim_sats):
-# return True
elif not nim.empty:
networks = [ nim.type ] # "DVB-C" or "DVB-T". TODO: seperate networks for different C/T tuners, if we want to support that.
else:
need_scan = True
print x, "not in ", known_networks
known_networks.append(x)
+
+ # don't offer to scan nims if nothing is connected
+ if not nimmanager.somethingConnected(nim.slot):
+ need_scan = False
if need_scan:
nims_to_scan.append(nim)
git.cweiske.de / enigma2.git / blobdiff