GraphMultiEpg/plugin.py: fix not working zap function when the bouquet is changed...

[enigma2.git] / lib / dvb / sec.h

diff --git a/lib/dvb/sec.h b/lib/dvb/sec.h
index 31415c4254923dd89ffc477b344f336b3c9093f6..27dcedd50411c337bbb01e15ea3bd9d5c4a96fee 100644 (file)
--- a/lib/dvb/sec.h
+++ b/lib/dvb/sec.h
@@ -19,15 +19,21 @@ public:
                MEASURE_IDLE_INPUTPOWER, MEASURE_RUNNING_INPUTPOWER,
                IF_MEASURE_IDLE_WAS_NOT_OK_GOTO, IF_INPUTPOWER_DELTA_GOTO,
                UPDATE_CURRENT_ROTORPARAMS, INVALIDATE_CURRENT_ROTORPARMS,
+               UPDATE_CURRENT_SWITCHPARMS, INVALIDATE_CURRENT_SWITCHPARMS,
                IF_ROTORPOS_VALID_GOTO,
                IF_TUNER_LOCKED_GOTO,
                IF_TONE_GOTO, IF_NOT_TONE_GOTO,
-               START_TUNE_TIMEOUT
+               START_TUNE_TIMEOUT,
+               SET_ROTOR_MOVING,
+               SET_ROTOR_STOPPED
        };
        int cmd;
        struct rotor
        {
-               int deltaA;   // difference in mA between running and stopped rotor
+               union {
+                       int deltaA;   // difference in mA between running and stopped rotor
+                       int lastSignal;
+               };
                int okcount;  // counter
                int steps;    // goto steps
                int direction;
@@ -164,7 +170,7 @@ class eDVBSatelliteSwitchParameters
 #endif
 public:
        enum t_22khz_signal {   HILO=0, ON=1, OFF=2     }; // 22 Khz
-       enum t_voltage_mode     {       HV=0, _14V=1, _18V=2, _0V=3 }; // 14/18 V
+       enum t_voltage_mode     {       HV=0, _14V=1, _18V=2, _0V=3, HV_13=4 }; // 14/18 V
 #ifndef SWIG
        t_voltage_mode m_voltage_mode;
        t_22khz_signal m_22khz_signal;
@@ -180,6 +186,7 @@ class eDVBSatelliteRotorParameters
 #endif
 public:
        enum { NORTH, SOUTH, EAST, WEST };
+       enum { FAST, SLOW };
 #ifndef SWIG
        eDVBSatelliteRotorParameters() { setDefaultOptions(); }
 
@@ -187,6 +194,7 @@ public:
        {
                bool m_use;     // can we use rotor inputpower to detect rotor running state ?
                __u8 m_delta;   // delta between running and stopped rotor
+               unsigned int m_turning_speed; // SLOW, FAST, or fast turning epoch
        };
        eDVBSatelliteRotorInputpowerParameters m_inputpower_parameters;
 
@@ -201,6 +209,7 @@ public:
 
        void setDefaultOptions() // set default rotor options
        {
+               m_inputpower_parameters.m_turning_speed = FAST; // fast turning
                m_inputpower_parameters.m_use = true;
                m_inputpower_parameters.m_delta = 60;
                m_gotoxx_parameters.m_lo_direction = EAST;
@@ -240,6 +249,7 @@ class eDVBRegisteredFrontend;
 
 class eDVBSatelliteEquipmentControl: public iDVBSatelliteEquipmentControl
 {
+       DECLARE_REF(eDVBSatelliteEquipmentControl);
 public:
        enum {
                DELAY_AFTER_CONT_TONE=0,  // delay after continuous tone change
@@ -253,20 +263,24 @@ public:
                DELAY_AFTER_ENABLE_VOLTAGE_BEFORE_MOTOR_CMD, // delay after enable voltage before transmit motor command
                DELAY_AFTER_MOTOR_STOP_CMD, // delay after transmit motor stop
                DELAY_AFTER_VOLTAGE_CHANGE_BEFORE_MOTOR_CMD, // delay after voltage change before transmit motor command
+               DELAY_BEFORE_SEQUENCE_REPEAT, // delay before the complete sequence is repeated (when enabled)
                MOTOR_COMMAND_RETRIES, // max transmit tries of rotor command when the rotor dont start turning (with power measurement)
                MOTOR_RUNNING_TIMEOUT, // max motor running time before timeout
                DELAY_AFTER_VOLTAGE_CHANGE_BEFORE_SWITCH_CMDS, // delay after change voltage before transmit toneburst/diseqc
+               DELAY_AFTER_DISEQC_RESET_CMD,
+               DELAY_AFTER_DISEQC_PERIPHERIAL_POWERON_CMD,
                MAX_PARAMS
        };
 private:
 #ifndef SWIG
        static eDVBSatelliteEquipmentControl *instance;
-       eDVBSatelliteLNBParameters m_lnbs[128]; // i think its enough
+       eDVBSatelliteLNBParameters m_lnbs[144]; // i think its enough
        int m_lnbidx; // current index for set parameters
        std::map<int, eDVBSatelliteSwitchParameters>::iterator m_curSat;
-       eSmartPtrList<eDVBRegisteredFrontend> &m_avail_frontends;
+       eSmartPtrList<eDVBRegisteredFrontend> &m_avail_frontends, &m_avail_simulate_frontends;
        bool m_rotorMoving;
        int m_not_linked_slot_mask;
+       bool m_canMeasureInputPower;
 #endif
 #ifdef SWIG
        eDVBSatelliteEquipmentControl();
@@ -275,10 +289,9 @@ private:
        static int m_params[MAX_PARAMS];
 public:
 #ifndef SWIG
-       eDVBSatelliteEquipmentControl(eSmartPtrList<eDVBRegisteredFrontend> &avail_frontends);
-       DECLARE_REF(eDVBSatelliteEquipmentControl);
-       RESULT prepare(iDVBFrontend &frontend, FRONTENDPARAMETERS &parm, const eDVBFrontendParametersSatellite &sat, int frontend_id);
-       int canTune(const eDVBFrontendParametersSatellite &feparm, iDVBFrontend *, int frontend_id);
+       eDVBSatelliteEquipmentControl(eSmartPtrList<eDVBRegisteredFrontend> &avail_frontends, eSmartPtrList<eDVBRegisteredFrontend> &avail_simulate_frontends);
+       RESULT prepare(iDVBFrontend &frontend, FRONTENDPARAMETERS &parm, const eDVBFrontendParametersSatellite &sat, int frontend_id, unsigned int tunetimeout);
+       int canTune(const eDVBFrontendParametersSatellite &feparm, iDVBFrontend *, int frontend_id, int *highest_score_lnb=0);
        bool currentLNBValid() { return m_lnbidx > -1 && m_lnbidx < (int)(sizeof(m_lnbs) / sizeof(eDVBSatelliteLNBParameters)); }
 #endif
        static eDVBSatelliteEquipmentControl *getInstance() { return instance; }
@@ -307,6 +320,7 @@ public:
        RESULT setLaDirection(int direction);
        RESULT setUseInputpower(bool onoff);
        RESULT setInputpowerDelta(int delta);  // delta between running and stopped rotor
+       RESULT setRotorTurningSpeed(int speed);  // set turning speed..
 /* Satellite Specific Parameters */
        RESULT addSatellite(int orbital_position);
        RESULT setVoltageMode(int mode);
@@ -317,9 +331,9 @@ public:
        RESULT setTunerDepends(int from, int to);
        void setSlotNotLinked(int tuner_no);
 
-       PyObject *get_exclusive_satellites(int tu1, int tu2);
        void setRotorMoving(bool); // called from the frontend's
        bool isRotorMoving();
+       bool canMeasureInputPower() { return m_canMeasureInputPower; }
 };
 
 #endif