if ( fec != FEC::fNone && fec > FEC::f9_10 )
fec = FEC::fAuto;
inversion = Inversion::Unknown;
+ pilot = Pilot::Unknown;
orbital_position = ((descriptor.getOrbitalPosition() >> 12) & 0xF) * 1000;
orbital_position += ((descriptor.getOrbitalPosition() >> 8) & 0xF) * 100;
orbital_position += ((descriptor.getOrbitalPosition() >> 4) & 0xF) * 10;
eDebug("satellite_delivery_descriptor non valid modulation type.. force QPSK");
modulation=QPSK;
}
- roll_off = descriptor.getRollOff();
+ rolloff = descriptor.getRollOff();
if (system == System::DVB_S2)
{
- eDebug("SAT DVB-S2 freq %d, %s, pos %d, sr %d, fec %d, modulation %d, roll_off %d",
+ eDebug("SAT DVB-S2 freq %d, %s, pos %d, sr %d, fec %d, modulation %d, rolloff %d",
frequency,
polarisation ? "hor" : "vert",
orbital_position,
symbol_rate, fec,
modulation,
- roll_off);
+ rolloff);
}
else
{
}
case iDVBFrontend::feCable:
hash = 0xFFFF0000;
+ hash |= (cable.frequency/1000)&0xFFFF;
return 0;
case iDVBFrontend::feTerrestrial:
hash = 0xEEEE0000;
+ hash |= (terrestrial.frequency/1000)&0xFFFF;
return 0;
default:
return -1;
eDVBFrontend::eDVBFrontend(int adap, int fe, int &ok)
:m_enabled(false), m_type(-1), m_dvbid(fe), m_slotid(fe)
- ,m_fd(-1), m_need_rotor_workaround(false), m_sn(0), m_timeout(0), m_tuneTimer(0)
+ ,m_fd(-1), m_need_rotor_workaround(false), m_can_handle_dvbs2(false)
+ ,m_sn(0), m_timeout(0), m_tuneTimer(0)
#if HAVE_DVB_API_VERSION < 3
,m_secfd(-1)
#endif
if (m_sn)
return -1; // already opened
- m_state=0;
+ m_state=stateIdle;
m_tuning=0;
#if HAVE_DVB_API_VERSION < 3
setTone(iDVBFrontend::toneOff);
setVoltage(iDVBFrontend::voltageOff);
- m_sn = new eSocketNotifier(eApp, m_fd, eSocketNotifier::Read);
+ m_sn = new eSocketNotifier(eApp, m_fd, eSocketNotifier::Read, false);
CONNECT(m_sn->activated, eDVBFrontend::feEvent);
return 0;
}
-int eDVBFrontend::closeFrontend()
+int eDVBFrontend::closeFrontend(bool force)
{
- eDVBRegisteredFrontend *linked_fe = (eDVBRegisteredFrontend*)m_data[LINKED_NEXT_PTR];
- while (linked_fe != (eDVBRegisteredFrontend*)-1)
+ if (!force && m_data[CUR_VOLTAGE] != -1 && m_data[CUR_VOLTAGE] != iDVBFrontend::voltageOff)
{
- if (linked_fe->m_inuse)
+ long tmp = m_data[LINKED_NEXT_PTR];
+ while (tmp != -1)
{
- eDebug("dont close frontend %d until the linked frontend %d in slot %d is still in use",
- m_dvbid, linked_fe->m_frontend->getDVBID(), linked_fe->m_frontend->getSlotID());
- return -1;
+ eDVBRegisteredFrontend *linked_fe = (eDVBRegisteredFrontend*)tmp;
+ if (linked_fe->m_inuse)
+ {
+ eDebug("dont close frontend %d until the linked frontend %d in slot %d is still in use",
+ m_dvbid, linked_fe->m_frontend->getDVBID(), linked_fe->m_frontend->getSlotID());
+ return -1;
+ }
+ linked_fe->m_frontend->getData(LINKED_NEXT_PTR, tmp);
}
- linked_fe->m_frontend->getData(LINKED_NEXT_PTR, (long&)linked_fe);
}
if (m_fd >= 0)
{
#endif
delete m_sn;
m_sn=0;
+ m_state = stateClosed;
return 0;
}
eDVBFrontend::~eDVBFrontend()
{
+ m_data[LINKED_PREV_PTR] = m_data[LINKED_NEXT_PTR] = -1;
closeFrontend();
delete m_timeout;
delete m_tuneTimer;
state = stateTuning;
else
{
+ eDVBFrontend *sec_fe = this;
+ long tmp = m_data[LINKED_PREV_PTR];
+
eDebug("stateLostLock");
state = stateLostLock;
- m_data[CSW] = m_data[UCSW] = m_data[TONEBURST] = -1; // reset diseqc
+
+ while (tmp != -1)
+ {
+ eDVBRegisteredFrontend *linked_fe = (eDVBRegisteredFrontend*)tmp;
+ sec_fe = linked_fe->m_frontend;
+ sec_fe->getData(LINKED_NEXT_PTR, tmp);
+ }
+ sec_fe->m_data[CSW] = sec_fe->m_data[UCSW] = sec_fe->m_data[TONEBURST] = -1; // reset diseqc
}
}
if (m_state != state)
void fillDictWithSatelliteData(ePyObject dict, const FRONTENDPARAMETERS &parm, eDVBFrontend *fe)
{
long freq_offset=0;
- long csw=0;
const char *tmp=0;
- fe->getData(eDVBFrontend::CSW, csw);
fe->getData(eDVBFrontend::FREQ_OFFSET, freq_offset);
int frequency = parm_frequency + freq_offset;
PutToDict(dict, "frequency", frequency);
break;
#endif
}
+ PutToDict(dict, "fec_inner", tmp);
#if HAVE_DVB_API_VERSION >=3
PutToDict(dict, "modulation",
parm_u_qpsk_fec_inner > FEC_S2_QPSK_9_10 ? "8PSK": "QPSK" );
+ if (parm_u_qpsk_fec_inner > FEC_AUTO)
+ {
+ switch(parm_inversion & 0xc)
+ {
+ default: // unknown rolloff
+ case 0: // 0.35
+ tmp = "ROLLOFF_0_35";
+ break;
+ case 4: // 0.25
+ tmp = "ROLLOFF_0_25";
+ break;
+ case 8: // 0.20
+ tmp = "ROLLOFF_0_20";
+ break;
+ }
+ PutToDict(dict, "rolloff", tmp);
+ if (parm_u_qpsk_fec_inner > FEC_S2_QPSK_9_10)
+ {
+ switch(parm_inversion & 0x30)
+ {
+ case 0: // pilot off
+ tmp = "PILOT_OFF";
+ break;
+ case 0x10: // pilot on
+ tmp = "PILOT_ON";
+ break;
+ case 0x20: // pilot auto
+ tmp = "PILOT_AUTO";
+ break;
+ }
+ PutToDict(dict, "pilot", tmp);
+ }
+ tmp = "DVB-S2";
+ }
+ else
+ tmp = "DVB-S";
#else
PutToDict(dict, "modulation", "QPSK" );
+ tmp = "DVB-S";
#endif
- PutToDict(dict, "fec_inner", tmp);
- tmp = parm_u_qpsk_fec_inner > FEC_AUTO ?
- "DVB-S2" : "DVB-S";
PutToDict(dict, "system", tmp);
}
void fillDictWithCableData(ePyObject dict, const FRONTENDPARAMETERS &parm)
{
const char *tmp=0;
+#if HAVE_DVB_API_VERSION < 3
+ PutToDict(dict, "frequency", parm_frequency);
+#else
PutToDict(dict, "frequency", parm_frequency/1000);
+#endif
PutToDict(dict, "symbol_rate", parm_u_qam_symbol_rate);
switch(parm_u_qam_fec_inner)
{
if (dest && PyDict_Check(dest))
{
const char *tmp=0;
- PutToDict(dest, "tuner_number", m_dvbid);
+ PutToDict(dest, "tuner_number", m_slotid);
switch(m_type)
{
case feSatellite:
FILE *f=fopen(proc_name, "r");
if (f)
{
- if (fscanf(f, "%08x", &power) != 1)
+ if (fscanf(f, "%d", &power) != 1)
eDebug("read %s failed!! (%m)", proc_name);
else
eDebug("%s is %d\n", proc_name, power);
return true;
}
-void eDVBFrontend::setRotorData(int pos, int cmd)
+void eDVBFrontend::tuneLoop() // called by m_tuneTimer
{
- m_data[ROTOR_CMD] = cmd;
- m_data[ROTOR_POS] = pos;
- if ( m_data[SATPOS_DEPENDS_PTR] != -1 )
- {
- eDVBRegisteredFrontend *satpos_depends_to_fe = (eDVBRegisteredFrontend*) m_data[SATPOS_DEPENDS_PTR];
- satpos_depends_to_fe->m_frontend->m_data[ROTOR_CMD] = cmd;
- satpos_depends_to_fe->m_frontend->m_data[ROTOR_POS] = pos;
- }
- else
- {
- eDVBRegisteredFrontend *next = (eDVBRegisteredFrontend *)m_data[LINKED_NEXT_PTR];
- while ( (long)next != -1 )
- {
- next->m_frontend->m_data[ROTOR_CMD] = cmd;
- next->m_frontend->m_data[ROTOR_POS] = pos;
- next = (eDVBRegisteredFrontend *)next->m_frontend->m_data[LINKED_NEXT_PTR];
- }
- eDVBRegisteredFrontend *prev = (eDVBRegisteredFrontend *)m_data[LINKED_PREV_PTR];
- while ( (long)prev != -1 )
- {
- prev->m_frontend->m_data[ROTOR_CMD] = cmd;
- prev->m_frontend->m_data[ROTOR_POS] = pos;
- prev = (eDVBRegisteredFrontend *)prev->m_frontend->m_data[LINKED_PREV_PTR];
+ int delay=0;
+ eDVBFrontend *sec_fe = this;
+ eDVBRegisteredFrontend *regFE = 0;
+ long tmp = m_data[LINKED_PREV_PTR];
+ while ( tmp != -1 )
+ {
+ eDVBRegisteredFrontend *prev = (eDVBRegisteredFrontend *)tmp;
+ sec_fe = prev->m_frontend;
+ tmp = prev->m_frontend->m_data[LINKED_PREV_PTR];
+ if (tmp == -1 && sec_fe != this && !prev->m_inuse) {
+ int state = sec_fe->m_state;
+ if (state != eDVBFrontend::stateIdle && state != stateClosed)
+ {
+ sec_fe->closeFrontend(true);
+ state = sec_fe->m_state;
+ }
+ if (state == eDVBFrontend::stateClosed)
+ {
+ regFE = prev;
+ prev->inc_use();
+ }
}
}
-}
-void eDVBFrontend::tuneLoop() // called by m_tuneTimer
-{
- int delay=0;
if ( m_sec_sequence && m_sec_sequence.current() != m_sec_sequence.end() )
{
+ long *sec_fe_data = sec_fe->m_data;
// eDebug("tuneLoop %d\n", m_sec_sequence.current()->cmd);
switch (m_sec_sequence.current()->cmd)
{
{
int voltage = m_sec_sequence.current()++->voltage;
eDebug("[SEC] setVoltage %d", voltage);
- setVoltage(voltage);
+ sec_fe->setVoltage(voltage);
break;
}
case eSecCommand::IF_VOLTAGE_GOTO:
{
eSecCommand::pair &compare = m_sec_sequence.current()->compare;
- if ( compare.voltage == m_data[CUR_VOLTAGE] && setSecSequencePos(compare.steps) )
+ if ( compare.voltage == sec_fe_data[CUR_VOLTAGE] && setSecSequencePos(compare.steps) )
break;
++m_sec_sequence.current();
break;
case eSecCommand::IF_NOT_VOLTAGE_GOTO:
{
eSecCommand::pair &compare = m_sec_sequence.current()->compare;
- if ( compare.voltage != m_data[CUR_VOLTAGE] && setSecSequencePos(compare.steps) )
+ if ( compare.voltage != sec_fe_data[CUR_VOLTAGE] && setSecSequencePos(compare.steps) )
break;
++m_sec_sequence.current();
break;
case eSecCommand::IF_TONE_GOTO:
{
eSecCommand::pair &compare = m_sec_sequence.current()->compare;
- if ( compare.tone == m_data[CUR_TONE] && setSecSequencePos(compare.steps) )
+ if ( compare.tone == sec_fe_data[CUR_TONE] && setSecSequencePos(compare.steps) )
break;
++m_sec_sequence.current();
break;
case eSecCommand::IF_NOT_TONE_GOTO:
{
eSecCommand::pair &compare = m_sec_sequence.current()->compare;
- if ( compare.tone != m_data[CUR_TONE] && setSecSequencePos(compare.steps) )
+ if ( compare.tone != sec_fe_data[CUR_TONE] && setSecSequencePos(compare.steps) )
break;
++m_sec_sequence.current();
break;
}
case eSecCommand::SET_TONE:
eDebug("[SEC] setTone %d", m_sec_sequence.current()->tone);
- setTone(m_sec_sequence.current()++->tone);
+ sec_fe->setTone(m_sec_sequence.current()++->tone);
break;
case eSecCommand::SEND_DISEQC:
- sendDiseqc(m_sec_sequence.current()->diseqc);
+ sec_fe->sendDiseqc(m_sec_sequence.current()->diseqc);
eDebugNoNewLine("[SEC] sendDiseqc: ");
for (int i=0; i < m_sec_sequence.current()->diseqc.len; ++i)
eDebugNoNewLine("%02x", m_sec_sequence.current()->diseqc.data[i]);
break;
case eSecCommand::SEND_TONEBURST:
eDebug("[SEC] sendToneburst: %d", m_sec_sequence.current()->toneburst);
- sendToneburst(m_sec_sequence.current()++->toneburst);
+ sec_fe->sendToneburst(m_sec_sequence.current()++->toneburst);
break;
case eSecCommand::SET_FRONTEND:
eDebug("[SEC] setFrontend");
int idx = m_sec_sequence.current()++->val;
if ( idx == 0 || idx == 1 )
{
- m_idleInputpower[idx] = readInputpower();
+ m_idleInputpower[idx] = sec_fe->readInputpower();
eDebug("[SEC] idleInputpower[%d] is %d", idx, m_idleInputpower[idx]);
}
else
int idx = compare.val;
if ( idx == 0 || idx == 1 )
{
- int idle = readInputpower();
+ int idle = sec_fe->readInputpower();
int diff = abs(idle-m_idleInputpower[idx]);
if ( diff > 0)
{
break;
}
case eSecCommand::MEASURE_RUNNING_INPUTPOWER:
- m_runningInputpower = readInputpower();
+ m_runningInputpower = sec_fe->readInputpower();
eDebug("[SEC] runningInputpower is %d", m_runningInputpower);
++m_sec_sequence.current();
break;
case eSecCommand::IF_INPUTPOWER_DELTA_GOTO:
{
- int idleInputpower = m_idleInputpower[ (m_data[CUR_VOLTAGE]&1) ? 0 : 1];
+ int idleInputpower = m_idleInputpower[ (sec_fe_data[CUR_VOLTAGE]&1) ? 0 : 1];
eSecCommand::rotor &cmd = m_sec_sequence.current()->measure;
const char *txt = cmd.direction ? "running" : "stopped";
eDebug("[SEC] waiting for rotor %s %d, idle %d, delta %d",
break;
}
case eSecCommand::IF_ROTORPOS_VALID_GOTO:
- if (m_data[ROTOR_CMD] != -1 && m_data[ROTOR_POS] != -1)
+ if (sec_fe_data[ROTOR_CMD] != -1 && sec_fe_data[ROTOR_POS] != -1)
setSecSequencePos(m_sec_sequence.current()->steps);
else
++m_sec_sequence.current();
break;
case eSecCommand::INVALIDATE_CURRENT_ROTORPARMS:
eDebug("[SEC] invalidate current rotorparams");
- setRotorData(-1,-1);
+ sec_fe_data[ROTOR_CMD] = -1;
+ sec_fe_data[ROTOR_POS] = -1;
++m_sec_sequence.current();
break;
case eSecCommand::UPDATE_CURRENT_ROTORPARAMS:
- setRotorData(m_data[NEW_ROTOR_POS], m_data[NEW_ROTOR_CMD]);
- eDebug("[SEC] update current rotorparams %d %04lx %ld", m_timeoutCount, m_data[ROTOR_CMD], m_data[ROTOR_POS]);
+ sec_fe_data[ROTOR_CMD] = sec_fe_data[NEW_ROTOR_CMD];
+ sec_fe_data[ROTOR_POS] = sec_fe_data[NEW_ROTOR_POS];
+ eDebug("[SEC] update current rotorparams %d %04lx %ld", m_timeoutCount, sec_fe_data[ROTOR_CMD], sec_fe_data[ROTOR_POS]);
++m_sec_sequence.current();
break;
case eSecCommand::SET_ROTOR_DISEQC_RETRYS:
break;
case eSecCommand::SET_POWER_LIMITING_MODE:
{
- if (m_need_rotor_workaround)
+ char proc_name[64];
+ sprintf(proc_name, "/proc/stb/frontend/%d/static_current_limiting", sec_fe->m_dvbid);
+ FILE *f=fopen(proc_name, "w");
+ if (f) // new interface exist?
+ {
+ bool slimiting = m_sec_sequence.current()->mode == eSecCommand::modeStatic;
+ if (fprintf(f, "%s", slimiting ? "on" : "off") <= 0)
+ eDebug("write %s failed!! (%m)", proc_name);
+ else
+ eDebug("[SEC] set %s current limiting", slimiting ? "static" : "dynamic");
+ fclose(f);
+ }
+ else if (sec_fe->m_need_rotor_workaround)
{
char dev[16];
-
+ int slotid = sec_fe->m_slotid;
// FIXMEEEEEE hardcoded i2c devices for dm7025 and dm8000
- if (m_slotid < 2)
- sprintf(dev, "/dev/i2c/%d", m_slotid);
- else if (m_slotid == 2)
+ if (slotid < 2)
+ sprintf(dev, "/dev/i2c/%d", slotid);
+ else if (slotid == 2)
sprintf(dev, "/dev/i2c/2"); // first nim socket on DM8000 use /dev/i2c/2
- else if (m_slotid == 3)
+ else if (slotid == 3)
sprintf(dev, "/dev/i2c/4"); // second nim socket on DM8000 use /dev/i2c/4
int fd = ::open(dev, O_RDWR);
}
m_tuneTimer->start(delay,true);
}
+ if (regFE)
+ regFE->dec_use();
}
void eDVBFrontend::setFrontend()
eDebug("no valid fec for DVB-S2 set.. abort !!");
return -EINVAL;
}
- if (feparm.modulation == eDVBFrontendParametersSatellite::Modulation::M8PSK)
+ parm_inversion |= (feparm.rolloff << 2); // Hack.. we use bit 2..3 of inversion param for rolloff
+ if (feparm.modulation == eDVBFrontendParametersSatellite::Modulation::M8PSK) {
parm_u_qpsk_fec_inner = (fe_code_rate_t)((int)parm_u_qpsk_fec_inner+9);
// 8PSK fec driver values are decimal 9 bigger
+ parm_inversion |= (feparm.pilot << 4); // Hack.. we use bit 4..5 of inversion param for pilot
+ }
}
#endif
// FIXME !!! get frequency range from tuner
RESULT eDVBFrontend::prepare_cable(const eDVBFrontendParametersCable &feparm)
{
+#if HAVE_DVB_API_VERSION < 3
+ parm_frequency = feparm.frequency;
+#else
parm_frequency = feparm.frequency * 1000;
+#endif
parm_u_qam_symbol_rate = feparm.symbol_rate;
switch (feparm.modulation)
{
switch (voltage)
{
case voltageOff:
- for (int i=0; i < 3; ++i) // reset diseqc
- m_data[i]=-1;
+ m_data[CSW]=m_data[UCSW]=m_data[TONEBURST]=-1; // reset diseqc
vlt = SEC_VOLTAGE_OFF;
break;
case voltage13_5:
int type;
if (feparm->getSystem(type) || type != m_type || !m_enabled)
return 0;
-
if (m_type == eDVBFrontend::feSatellite)
{
ASSERT(m_sec);
eDVBFrontendParametersSatellite sat_parm;
int ret = feparm->getDVBS(sat_parm);
ASSERT(!ret);
- return m_sec->canTune(sat_parm, this, 1 << m_slotid);
+ if (sat_parm.system == eDVBFrontendParametersSatellite::System::DVB_S2 && !m_can_handle_dvbs2)
+ return 0;
+ ret = m_sec->canTune(sat_parm, this, 1 << m_slotid);
+ if (ret > 1 && sat_parm.system == eDVBFrontendParametersSatellite::System::DVB_S && m_can_handle_dvbs2)
+ ret -= 1;
+ return ret;
}
else if (m_type == eDVBFrontend::feCable)
return 2; // more prio for cable frontends
- return 1;
+ else if (m_type == eDVBFrontend::feTerrestrial)
+ return 1;
+ return 0;
}
bool eDVBFrontend::setSlotInfo(ePyObject obj)
// HACK.. the rotor workaround is neede for all NIMs with LNBP21 voltage regulator...
m_need_rotor_workaround = !!strstr(m_description, "Alps BSBE1") ||
!!strstr(m_description, "Alps BSBE2") ||
- !!strstr(m_description, "Alps -S");
- eDebug("setSlotInfo for dvb frontend %d to slotid %d, descr %s, need rotorworkaround %s, enabled %s",
- m_dvbid, m_slotid, m_description, m_need_rotor_workaround ? "Yes" : "No", m_enabled ? "Yes" : "No" );
+ !!strstr(m_description, "Alps -S") ||
+ !!strstr(m_description, "BCM4501");
+ m_can_handle_dvbs2 = !!strstr(m_description, "Alps BSBE2") || !!strstr(m_description, "BCM4501");
+ eDebug("setSlotInfo for dvb frontend %d to slotid %d, descr %s, need rotorworkaround %s, enabled %s, DVB-S2 %s",
+ m_dvbid, m_slotid, m_description, m_need_rotor_workaround ? "Yes" : "No", m_enabled ? "Yes" : "No", m_can_handle_dvbs2 ? "Yes" : "No" );
return true;
arg_error:
PyErr_SetString(PyExc_StandardError,
git.cweiske.de / enigma2.git / blobdiff