}
eDVBSatelliteEquipmentControl::eDVBSatelliteEquipmentControl(eSmartPtrList<eDVBRegisteredFrontend> &avail_frontends, eSmartPtrList<eDVBRegisteredFrontend> &avail_simulate_frontends)
- :m_lnbidx(-1), m_curSat(m_lnbs[0].m_satellites.end()), m_avail_frontends(avail_frontends), m_avail_simulate_frontends(avail_simulate_frontends), m_rotorMoving(false)
+ :m_lnbidx((sizeof(m_lnbs) / sizeof(eDVBSatelliteLNBParameters))-1), m_curSat(m_lnbs[0].m_satellites.end()), m_avail_frontends(avail_frontends), m_avail_simulate_frontends(avail_simulate_frontends), m_rotorMoving(0)
{
if (!instance)
instance = this;
-
clear();
-
-// ASTRA
- addLNB();
- setLNBSlotMask(3);
- setLNBLOFL(9750000);
- setLNBThreshold(11700000);
- setLNBLOFH(10607000);
- setDiSEqCMode(eDVBSatelliteDiseqcParameters::V1_0);
- setToneburst(eDVBSatelliteDiseqcParameters::NO);
- setRepeats(0);
- setCommittedCommand(eDVBSatelliteDiseqcParameters::BB);
- setCommandOrder(0); // committed, toneburst
- setFastDiSEqC(true);
- setSeqRepeat(false);
- addSatellite(192);
- setVoltageMode(eDVBSatelliteSwitchParameters::HV);
- setToneMode(eDVBSatelliteSwitchParameters::HILO);
-
-// Hotbird
- addLNB();
- setLNBSlotMask(3);
- setLNBLOFL(9750000);
- setLNBThreshold(11700000);
- setLNBLOFH(10600000);
- setDiSEqCMode(eDVBSatelliteDiseqcParameters::V1_0);
- setToneburst(eDVBSatelliteDiseqcParameters::NO);
- setRepeats(0);
- setCommittedCommand(eDVBSatelliteDiseqcParameters::AB);
- setCommandOrder(0); // committed, toneburst
- setFastDiSEqC(true);
- setSeqRepeat(false);
- addSatellite(130);
- setVoltageMode(eDVBSatelliteSwitchParameters::HV);
- setToneMode(eDVBSatelliteSwitchParameters::HILO);
-
-// Rotor
- addLNB();
- setLNBSlotMask(3);
- setLNBLOFL(9750000);
- setLNBThreshold(11700000);
- setLNBLOFH(10600000);
- setDiSEqCMode(eDVBSatelliteDiseqcParameters::V1_2);
- setToneburst(eDVBSatelliteDiseqcParameters::NO);
- setRepeats(0);
- setCommittedCommand(eDVBSatelliteDiseqcParameters::AA);
- setCommandOrder(0); // committed, toneburst
- setFastDiSEqC(true);
- setSeqRepeat(false);
- setLaDirection(eDVBSatelliteRotorParameters::NORTH);
- setLoDirection(eDVBSatelliteRotorParameters::EAST);
- setLatitude(51.017);
- setLongitude(8.683);
- setUseInputpower(true);
- setInputpowerDelta(50);
-
- addSatellite(235);
- setVoltageMode(eDVBSatelliteSwitchParameters::HV);
- setToneMode(eDVBSatelliteSwitchParameters::HILO);
- setRotorPosNum(0);
-
- addSatellite(284);
- setVoltageMode(eDVBSatelliteSwitchParameters::HV);
- setToneMode(eDVBSatelliteSwitchParameters::HILO);
- setRotorPosNum(0);
-
- addSatellite(420);
- setVoltageMode(eDVBSatelliteSwitchParameters::HV);
- setToneMode(eDVBSatelliteSwitchParameters::HILO);
- setRotorPosNum(1); // stored pos 1
}
#define eSecDebugNoSimulate(x...) \
bool simulate = ((eDVBFrontend*)fe)->is_simulate();
bool direct_connected = m_not_linked_slot_mask & slot_id;
int score=0, satcount=0;
+ long linked_prev_ptr=-1, linked_next_ptr=-1, linked_csw=-1, linked_ucsw=-1, linked_toneburst=-1,
+ fe_satpos_depends_ptr=-1, fe_rotor_pos=-1;
+ bool linked_in_use = false;
+
+ eSecDebugNoSimulate("direct_connected %d", !!direct_connected);
+
+ fe->getData(eDVBFrontend::LINKED_PREV_PTR, linked_prev_ptr);
+ fe->getData(eDVBFrontend::LINKED_NEXT_PTR, linked_next_ptr);
+ fe->getData(eDVBFrontend::SATPOS_DEPENDS_PTR, fe_satpos_depends_ptr);
+
+ // first we search the linkage base frontend and check if any tuner in prev direction is used
+ while (linked_prev_ptr != -1)
+ {
+ eDVBRegisteredFrontend *linked_fe = (eDVBRegisteredFrontend*) linked_prev_ptr;
+ if (linked_fe->m_inuse)
+ linked_in_use = true;
+ fe = linked_fe->m_frontend;
+ linked_fe->m_frontend->getData(eDVBFrontend::LINKED_PREV_PTR, (long&)linked_prev_ptr);
+ }
+
+ fe->getData(eDVBFrontend::ROTOR_POS, fe_rotor_pos);
+
+ // now check also the linked tuners is in use
+ while (!linked_in_use && linked_next_ptr != -1)
+ {
+ eDVBRegisteredFrontend *linked_fe = (eDVBRegisteredFrontend*) linked_next_ptr;
+ if (linked_fe->m_inuse)
+ linked_in_use = true;
+ linked_fe->m_frontend->getData(eDVBFrontend::LINKED_NEXT_PTR, (long&)linked_next_ptr);
+ }
+
+ // when a linked in use tuner is found we get the tuner data...
+ if (linked_in_use)
+ {
+ fe->getData(eDVBFrontend::CSW, linked_csw);
+ fe->getData(eDVBFrontend::UCSW, linked_ucsw);
+ fe->getData(eDVBFrontend::TONEBURST, linked_toneburst);
+ }
if (highest_score_lnb)
*highest_score_lnb = -1;
{
bool rotor=false;
eDVBSatelliteLNBParameters &lnb_param = m_lnbs[idx];
- if ( lnb_param.slot_mask & slot_id ) // lnb for correct tuner?
+ if ( lnb_param.m_slot_mask & slot_id ) // lnb for correct tuner?
{
int ret = 0;
eDVBSatelliteDiseqcParameters &di_param = lnb_param.m_diseqc_parameters;
{
bool diseqc=false;
long band=0,
- linked_prev_ptr=-1,
- linked_next_ptr=-1,
- satpos_depends_ptr=-1,
+ satpos_depends_ptr=fe_satpos_depends_ptr,
csw = di_param.m_committed_cmd,
ucsw = di_param.m_uncommitted_cmd,
toneburst = di_param.m_toneburst_param,
- curRotorPos;
+ rotor_pos = fe_rotor_pos;
eSecDebugNoSimulate("sat %d found", sat.orbital_position);
- fe->getData(eDVBFrontend::LINKED_PREV_PTR, linked_prev_ptr);
- fe->getData(eDVBFrontend::SATPOS_DEPENDS_PTR, satpos_depends_ptr);
if ( sat.frequency > lnb_param.m_lof_threshold )
band |= 1;
- if (!(sat.polarisation & eDVBFrontendParametersSatellite::Polarisation::Vertical))
+ if (!(sat.polarisation & eDVBFrontendParametersSatellite::Polarisation_Vertical))
band |= 2;
if (di_param.m_diseqc_mode >= eDVBSatelliteDiseqcParameters::V1_0)
if ( di_param.m_diseqc_mode == eDVBSatelliteDiseqcParameters::V1_2 ) // ROTOR
rotor = true;
- ret=10000;
+ ret = 10000;
}
else
{
eSecDebugNoSimulate("ret1 %d", ret);
- if (direct_connected) // frontend with direct connection?
+ if (linked_in_use)
{
- long ocsw = -1,
- oucsw = -1,
- oToneburst = -1;
- eSecDebugNoSimulate("direct");
- fe->getData(eDVBFrontend::ROTOR_POS, curRotorPos);
- fe->getData(eDVBFrontend::LINKED_NEXT_PTR, linked_next_ptr);
- fe->getData(eDVBFrontend::CSW, ocsw);
- fe->getData(eDVBFrontend::UCSW, oucsw);
- fe->getData(eDVBFrontend::TONEBURST, oToneburst);
- while (ret && linked_prev_ptr != -1) // check for linked tuners..
+ // compare tuner data
+ if ( (csw != linked_csw) ||
+ ( diseqc && (ucsw != linked_ucsw || toneburst != linked_toneburst) ) ||
+ ( rotor && rotor_pos != sat.orbital_position ) )
{
- eDVBRegisteredFrontend *linked_fe = (eDVBRegisteredFrontend*) linked_prev_ptr;
- if (linked_fe->m_inuse)
- {
- if ( (csw != ocsw) ||
- ( diseqc && (ucsw != oucsw || toneburst != oToneburst) ) ||
- ( rotor && curRotorPos != sat.orbital_position ) )
- {
- ret=0;
- }
- }
- linked_fe->m_frontend->getData(eDVBFrontend::LINKED_PREV_PTR, (long&)linked_prev_ptr);
+ ret = 0;
}
+ else
+ ret += 15;
eSecDebugNoSimulate("ret2 %d", ret);
- while (ret && linked_next_ptr != -1) // check for linked tuners..
+ if (ret) // special case when this tuner is linked to a satpos dependent tuner
{
- eDVBRegisteredFrontend *linked_fe = (eDVBRegisteredFrontend*) linked_next_ptr;
- if (linked_fe->m_inuse)
+ fe->getData(eDVBFrontend::SATPOS_DEPENDS_PTR, satpos_depends_ptr);
+ if (satpos_depends_ptr != -1)
{
- if ( (csw != ocsw) ||
- ( diseqc && (ucsw != oucsw || toneburst != oToneburst) ) ||
- ( rotor && curRotorPos != sat.orbital_position ) )
+ eDVBRegisteredFrontend *satpos_depends_to_fe = (eDVBRegisteredFrontend*) satpos_depends_ptr;
+ satpos_depends_to_fe->m_frontend->getData(eDVBFrontend::ROTOR_POS, rotor_pos);
+ if (!rotor || rotor_pos == -1 /* we dont know the rotor position yet */
+ || rotor_pos != sat.orbital_position ) // not the same orbital position?
{
- ret=0;
+ ret = 0;
}
}
- linked_fe->m_frontend->getData(eDVBFrontend::LINKED_NEXT_PTR, (long&)linked_next_ptr);
}
eSecDebugNoSimulate("ret3 %d", ret);
}
- else // linked frontend..
+ else if (satpos_depends_ptr != -1)
{
- long ocsw = -1,
- oucsw = -1,
- oToneburst = -1;
- while (linked_prev_ptr != -1)
+ eSecDebugNoSimulate("satpos depends");
+ eDVBRegisteredFrontend *satpos_depends_to_fe = (eDVBRegisteredFrontend*) satpos_depends_ptr;
+ if (direct_connected) // current fe is direct connected.. (can turn the rotor)
{
- eDVBRegisteredFrontend *linked_fe = (eDVBRegisteredFrontend*) linked_prev_ptr;
- linked_fe->m_frontend->getData(eDVBFrontend::LINKED_PREV_PTR, (long&)linked_prev_ptr);
- if (linked_prev_ptr == -1)
+ if (satpos_depends_to_fe->m_inuse) // if the dependent frontend is in use?
{
- iDVBFrontend *sec_fe = linked_fe->m_frontend;
- sec_fe->getData(eDVBFrontend::ROTOR_POS, curRotorPos);
- if (linked_fe->m_inuse)
- {
- sec_fe->getData(eDVBFrontend::CSW, ocsw);
- sec_fe->getData(eDVBFrontend::UCSW, oucsw);
- sec_fe->getData(eDVBFrontend::TONEBURST, oToneburst);
- eSecDebug("(%ld != %ld) || \n(%d && (%ld != %ld || %ld != %ld) ) ||\n( %d && %ld != %d ) )",
- csw, ocsw, diseqc, ucsw, oucsw, toneburst, oToneburst, rotor, curRotorPos, sat.orbital_position);
- if ( (csw != ocsw) ||
- ( diseqc && (ucsw != oucsw || toneburst != oToneburst) ) ||
- ( rotor && curRotorPos != sat.orbital_position ) )
- {
- ret=0;
- }
- }
+ if (!rotor || rotor_pos != sat.orbital_position) // new orbital position not equal to current orbital pos?
+ ret = 0;
+ else
+ ret += 10;
}
}
- eSecDebugNoSimulate("ret4 %d", ret);
- }
-
- if (ret)
- if (satpos_depends_ptr != -1)
+ else // current fe is dependent of another tuner ... (so this fe can't turn the rotor!)
{
- eSecDebugNoSimulate("satpos depends");
- eDVBRegisteredFrontend *satpos_depends_to_fe = (eDVBRegisteredFrontend*) satpos_depends_ptr;
- if ( satpos_depends_to_fe->m_inuse )
+ // get current orb pos of the tuner with rotor connection
+ satpos_depends_to_fe->m_frontend->getData(eDVBFrontend::ROTOR_POS, rotor_pos);
+ if (!rotor || rotor_pos == -1 /* we dont know the rotor position yet */
+ || rotor_pos != sat.orbital_position ) // not the same orbital position?
{
- if (!direct_connected)
- satpos_depends_to_fe->m_frontend->getData(eDVBFrontend::ROTOR_POS, curRotorPos);
- if (!rotor || curRotorPos != sat.orbital_position)
- ret=0;
+ ret = 0;
}
- eSecDebugNoSimulate("ret5 %d", ret);
}
+ eSecDebugNoSimulate("ret4 %d", ret);
+ }
- if (ret && rotor && curRotorPos != -1 && (direct_connected || satpos_depends_ptr == -1) ) // direct conntected or loopthrough!
- ret -= abs(curRotorPos-sat.orbital_position);
+ if (ret && rotor && rotor_pos != -1)
+ ret -= abs(rotor_pos-sat.orbital_position);
- eSecDebugNoSimulate("ret6 %d", ret);
+ eSecDebugNoSimulate("ret5 %d", ret);
if (ret)
{
lnb_param.m_lof_hi : lnb_param.m_lof_lo;
int tuner_freq = abs(sat.frequency - lof);
if (tuner_freq < 900000 || tuner_freq > 2200000)
- ret=0;
+ ret = 0;
}
+ if (ret && lnb_param.m_prio != -1)
+ ret = lnb_param.m_prio;
+
eSecDebugNoSimulate("ret %d, score old %d", ret, score);
if (ret > score)
{
}
}
if (score && satcount)
- score -= (satcount-1);
+ {
+ if (score > (satcount-1))
+ score -= (satcount-1);
+ else
+ score = 1; // min score
+ }
if (score && direct_connected)
score += 5; // increase score for tuners with direct sat connection
eSecDebugNoSimulate("final score %d", score);
lnb_param.m_satellites.find(sat.orbital_position);
if ( sit != lnb_param.m_satellites.end())
{
+ eSecCommandList sec_sequence;
+
+ lnb_param.guard_offset = 0; //HACK
+
+ frontend.setData(eDVBFrontend::SATCR, lnb_param.SatCR_idx);
+
eDVBSatelliteSwitchParameters &sw_param = sit->second;
bool doSetFrontend = true;
bool doSetVoltageToneFrontend = true;
- bool sendDiSEqC = false;
bool forceChanged = false;
+ bool needDiSEqCReset = false;
long band=0,
voltage = iDVBFrontend::voltageOff,
tone = iDVBFrontend::toneOff,
iDVBFrontend *sec_fe=&frontend;
eDVBRegisteredFrontend *linked_fe = 0;
eDVBSatelliteDiseqcParameters::t_diseqc_mode diseqc_mode = di_param.m_diseqc_mode;
+ eDVBSatelliteSwitchParameters::t_voltage_mode voltage_mode = sw_param.m_voltage_mode;
+ bool diseqc13V = voltage_mode == eDVBSatelliteSwitchParameters::HV_13;
+
+ if (diseqc13V)
+ voltage_mode = eDVBSatelliteSwitchParameters::HV;
frontend.getData(eDVBFrontend::SATPOS_DEPENDS_PTR, satposDependPtr);
sec_fe->getData(eDVBFrontend::ROTOR_CMD, lastRotorCmd);
sec_fe->getData(eDVBFrontend::ROTOR_POS, curRotorPos);
+ if (lastcsw == lastucsw && lastToneburst == lastucsw && lastucsw == -1)
+ needDiSEqCReset = true;
+
if ( sat.frequency > lnb_param.m_lof_threshold )
band |= 1;
+ if (!(sat.polarisation & eDVBFrontendParametersSatellite::Polarisation_Vertical))
+ band |= 2;
- if (band&1)
- parm.FREQUENCY = sat.frequency - lnb_param.m_lof_hi;
- else
- parm.FREQUENCY = sat.frequency - lnb_param.m_lof_lo;
-
- parm.FREQUENCY = abs(parm.FREQUENCY);
-
- frontend.setData(eDVBFrontend::FREQ_OFFSET, sat.frequency - parm.FREQUENCY);
+ int lof = (band&1)?lnb_param.m_lof_hi:lnb_param.m_lof_lo;
- if (!(sat.polarisation & eDVBFrontendParametersSatellite::Polarisation::Vertical))
- band |= 2;
+ int local=0;
- if ( sw_param.m_voltage_mode == eDVBSatelliteSwitchParameters::_14V
- || ( sat.polarisation & eDVBFrontendParametersSatellite::Polarisation::Vertical
- && sw_param.m_voltage_mode == eDVBSatelliteSwitchParameters::HV ) )
- voltage = VOLTAGE(13);
- else if ( sw_param.m_voltage_mode == eDVBSatelliteSwitchParameters::_18V
- || ( !(sat.polarisation & eDVBFrontendParametersSatellite::Polarisation::Vertical)
- && sw_param.m_voltage_mode == eDVBSatelliteSwitchParameters::HV ) )
- voltage = VOLTAGE(18);
- if ( (sw_param.m_22khz_signal == eDVBSatelliteSwitchParameters::ON)
- || ( sw_param.m_22khz_signal == eDVBSatelliteSwitchParameters::HILO && (band&1) ) )
- tone = iDVBFrontend::toneOn;
- else if ( (sw_param.m_22khz_signal == eDVBSatelliteSwitchParameters::OFF)
- || ( sw_param.m_22khz_signal == eDVBSatelliteSwitchParameters::HILO && !(band&1) ) )
- tone = iDVBFrontend::toneOff;
- eSecCommandList sec_sequence;
+ if(lnb_param.SatCR_idx == -1)
+ {
+ // calc Frequency
+ local = abs(sat.frequency
+ - ((lof - (lof % 1000)) + ((lof % 1000)>500 ? 1000 : 0)) ); //TODO für den Mist mal ein Macro schreiben
+ parm.FREQUENCY = (local - (local % 125)) + ((local % 125)>62 ? 125 : 0);
+ frontend.setData(eDVBFrontend::FREQ_OFFSET, sat.frequency - parm.FREQUENCY);
+
+ if ( voltage_mode == eDVBSatelliteSwitchParameters::_14V
+ || ( sat.polarisation & eDVBFrontendParametersSatellite::Polarisation_Vertical
+ && voltage_mode == eDVBSatelliteSwitchParameters::HV ) )
+ voltage = VOLTAGE(13);
+ else if ( voltage_mode == eDVBSatelliteSwitchParameters::_18V
+ || ( !(sat.polarisation & eDVBFrontendParametersSatellite::Polarisation_Vertical)
+ && voltage_mode == eDVBSatelliteSwitchParameters::HV ) )
+ voltage = VOLTAGE(18);
+ if ( (sw_param.m_22khz_signal == eDVBSatelliteSwitchParameters::ON)
+ || ( sw_param.m_22khz_signal == eDVBSatelliteSwitchParameters::HILO && (band&1) ) )
+ tone = iDVBFrontend::toneOn;
+ else if ( (sw_param.m_22khz_signal == eDVBSatelliteSwitchParameters::OFF)
+ || ( sw_param.m_22khz_signal == eDVBSatelliteSwitchParameters::HILO && !(band&1) ) )
+ tone = iDVBFrontend::toneOff;
+ }
+ else
+ {
+ unsigned int tmp = abs(sat.frequency
+ - ((lof - (lof % 1000)) + ((lof % 1000)>500 ? 1000 : 0)) )
+ + lnb_param.SatCRvco
+ - 1400000
+ + lnb_param.guard_offset;
+ parm.FREQUENCY = (lnb_param.SatCRvco - (tmp % 4000))+((tmp%4000)>2000?4000:0)+lnb_param.guard_offset;
+ lnb_param.UnicableTuningWord = (((tmp / 4000)+((tmp%4000)>2000?1:0))
+ | ((band & 1) ? 0x400 : 0) //HighLow
+ | ((band & 2) ? 0x800 : 0) //VertHor
+ | ((lnb_param.LNBNum & 1) ? 0 : 0x1000) //Umschaltung LNB1 LNB2
+ | (lnb_param.SatCR_idx << 13)); //Adresse des SatCR
+ eDebug("[prepare] UnicableTuningWord %#04x",lnb_param.UnicableTuningWord);
+ eDebug("[prepare] guard_offset %d",lnb_param.guard_offset);
+ frontend.setData(eDVBFrontend::FREQ_OFFSET, sat.frequency - ((lnb_param.UnicableTuningWord & 0x3FF) *4000 + 1400000 - lnb_param.SatCRvco + lof));
+ }
if (diseqc_mode >= eDVBSatelliteDiseqcParameters::V1_0)
{
compare.tone = iDVBFrontend::toneOff;
sec_sequence.push_back( eSecCommand(eSecCommand::IF_TONE_GOTO, compare) );
sec_sequence.push_back( eSecCommand(eSecCommand::SET_TONE, iDVBFrontend::toneOff) );
- sec_sequence.push_back( eSecCommand(eSecCommand::SLEEP, m_params[DELAY_AFTER_CONT_TONE]) );
+ sec_sequence.push_back( eSecCommand(eSecCommand::SLEEP, m_params[DELAY_AFTER_CONT_TONE_DISABLE_BEFORE_DISEQC]) );
- if ( RotorCmd != -1 && RotorCmd != lastRotorCmd )
+ if (diseqc13V)
+ vlt = iDVBFrontend::voltage13;
+ else if ( RotorCmd != -1 && RotorCmd != lastRotorCmd )
{
if (rotor_param.m_inputpower_parameters.m_use)
vlt = VOLTAGE(18); // in input power mode set 18V for measure input power
sec_sequence.push_back( eSecCommand(eSecCommand::SLEEP, m_params[DELAY_AFTER_ENABLE_VOLTAGE_BEFORE_SWITCH_CMDS]) );
sec_sequence.push_back( eSecCommand(eSecCommand::INVALIDATE_CURRENT_SWITCHPARMS) );
+ if (needDiSEqCReset)
+ {
+ eDVBDiseqcCommand diseqc;
+ memset(diseqc.data, 0, MAX_DISEQC_LENGTH);
+ diseqc.len = 3;
+ diseqc.data[0] = 0xE0;
+ diseqc.data[1] = 0;
+ diseqc.data[2] = 0;
+ // diseqc reset
+ sec_sequence.push_back( eSecCommand(eSecCommand::SEND_DISEQC, diseqc) );
+ sec_sequence.push_back( eSecCommand(eSecCommand::SLEEP, m_params[DELAY_AFTER_DISEQC_RESET_CMD]) );
+ diseqc.data[2] = 3;
+ // diseqc peripherial powersupply on
+ sec_sequence.push_back( eSecCommand(eSecCommand::SEND_DISEQC, diseqc) );
+ sec_sequence.push_back( eSecCommand(eSecCommand::SLEEP, m_params[DELAY_AFTER_DISEQC_PERIPHERIAL_POWERON_CMD]) );
+ }
+
for (int seq_repeat = 0; seq_repeat < (di_param.m_seq_repeat?2:1); ++seq_repeat)
{
if ( send_mask & 4 )
if (di_param.m_seq_repeat && seq_repeat == 0)
sec_sequence.push_back( eSecCommand(eSecCommand::SLEEP, m_params[DELAY_BEFORE_SEQUENCE_REPEAT]) );
}
- sendDiSEqC = true;
}
eDebugNoSimulate("RotorCmd %02x, lastRotorCmd %02lx", RotorCmd, lastRotorCmd);
if ( RotorCmd != -1 && RotorCmd != lastRotorCmd )
{
eSecCommand::pair compare;
- if (!send_mask)
+ if (!send_mask && lnb_param.SatCR_idx == -1)
{
compare.steps = +3;
compare.tone = iDVBFrontend::toneOff;
sec_sequence.push_back( eSecCommand(eSecCommand::IF_TONE_GOTO, compare) );
sec_sequence.push_back( eSecCommand(eSecCommand::SET_TONE, iDVBFrontend::toneOff) );
- sec_sequence.push_back( eSecCommand(eSecCommand::SLEEP, m_params[DELAY_AFTER_CONT_TONE]) );
+ sec_sequence.push_back( eSecCommand(eSecCommand::SLEEP, m_params[DELAY_AFTER_CONT_TONE_DISABLE_BEFORE_DISEQC]) );
compare.voltage = iDVBFrontend::voltageOff;
compare.steps = +4;
diseqc.data[3] = RotorCmd;
diseqc.data[4] = 0x00;
}
-
- if ( rotor_param.m_inputpower_parameters.m_use )
- { // use measure rotor input power to detect rotor state
- bool turn_fast = need_turn_fast(rotor_param.m_inputpower_parameters.m_turning_speed);
- eSecCommand::rotor cmd;
- eSecCommand::pair compare;
- compare.voltage = VOLTAGE(18);
- compare.steps = +3;
- sec_sequence.push_back( eSecCommand(eSecCommand::IF_VOLTAGE_GOTO, compare) );
- sec_sequence.push_back( eSecCommand(eSecCommand::SET_VOLTAGE, compare.voltage) );
-// measure idle power values
- sec_sequence.push_back( eSecCommand(eSecCommand::SLEEP, m_params[DELAY_AFTER_VOLTAGE_CHANGE_BEFORE_MEASURE_IDLE_INPUTPOWER]) ); // wait 150msec after voltage change
- sec_sequence.push_back( eSecCommand(eSecCommand::MEASURE_IDLE_INPUTPOWER, 1) );
- compare.val = 1;
- compare.steps = -2;
- sec_sequence.push_back( eSecCommand(eSecCommand::IF_MEASURE_IDLE_WAS_NOT_OK_GOTO, compare) );
- sec_sequence.push_back( eSecCommand(eSecCommand::SET_VOLTAGE, VOLTAGE(13)) );
- sec_sequence.push_back( eSecCommand(eSecCommand::SLEEP, m_params[DELAY_AFTER_VOLTAGE_CHANGE_BEFORE_MEASURE_IDLE_INPUTPOWER]) ); // wait 150msec before measure
- sec_sequence.push_back( eSecCommand(eSecCommand::MEASURE_IDLE_INPUTPOWER, 0) );
- compare.val = 0;
- sec_sequence.push_back( eSecCommand(eSecCommand::IF_MEASURE_IDLE_WAS_NOT_OK_GOTO, compare) );
-////////////////////////////
- sec_sequence.push_back( eSecCommand(eSecCommand::SET_ROTOR_DISEQC_RETRYS, m_params[MOTOR_COMMAND_RETRIES]) ); // 2 retries
- sec_sequence.push_back( eSecCommand(eSecCommand::INVALIDATE_CURRENT_ROTORPARMS) );
- sec_sequence.push_back( eSecCommand(eSecCommand::SEND_DISEQC, diseqc) );
- sec_sequence.push_back( eSecCommand(eSecCommand::SET_TIMEOUT, 40) ); // 2 seconds rotor start timout
-// rotor start loop
- sec_sequence.push_back( eSecCommand(eSecCommand::SLEEP, 50) ); // 50msec delay
- sec_sequence.push_back( eSecCommand(eSecCommand::MEASURE_RUNNING_INPUTPOWER) );
- cmd.direction=1; // check for running rotor
- cmd.deltaA=rotor_param.m_inputpower_parameters.m_delta;
- cmd.steps=+5;
- cmd.okcount=0;
- sec_sequence.push_back( eSecCommand(eSecCommand::IF_INPUTPOWER_DELTA_GOTO, cmd ) ); // check if rotor has started
- sec_sequence.push_back( eSecCommand(eSecCommand::IF_TIMEOUT_GOTO, +2 ) ); // timeout .. we assume now the rotor is already at the correct position
- sec_sequence.push_back( eSecCommand(eSecCommand::GOTO, -4) ); // goto loop start
- sec_sequence.push_back( eSecCommand(eSecCommand::IF_NO_MORE_ROTOR_DISEQC_RETRYS_GOTO, turn_fast ? 10 : 9 ) ); // timeout .. we assume now the rotor is already at the correct position
- sec_sequence.push_back( eSecCommand(eSecCommand::GOTO, -8) ); // goto loop start
-////////////////////
- sec_sequence.push_back( eSecCommand(eSecCommand::SET_ROTOR_MOVING) );
- if (turn_fast)
- sec_sequence.push_back( eSecCommand(eSecCommand::SET_VOLTAGE, VOLTAGE(18)) );
- sec_sequence.push_back( eSecCommand(eSecCommand::SET_TIMEOUT, m_params[MOTOR_RUNNING_TIMEOUT]*20) ); // 2 minutes running timeout
-// rotor running loop
- sec_sequence.push_back( eSecCommand(eSecCommand::SLEEP, 50) ); // wait 50msec
- sec_sequence.push_back( eSecCommand(eSecCommand::MEASURE_RUNNING_INPUTPOWER) );
- cmd.direction=0; // check for stopped rotor
- cmd.steps=+3;
- sec_sequence.push_back( eSecCommand(eSecCommand::IF_INPUTPOWER_DELTA_GOTO, cmd ) );
- sec_sequence.push_back( eSecCommand(eSecCommand::IF_TIMEOUT_GOTO, +2 ) ); // timeout ? this should never happen
- sec_sequence.push_back( eSecCommand(eSecCommand::GOTO, -4) ); // running loop start
-/////////////////////
- sec_sequence.push_back( eSecCommand(eSecCommand::UPDATE_CURRENT_ROTORPARAMS) );
- sec_sequence.push_back( eSecCommand(eSecCommand::SET_ROTOR_STOPPED) );
- }
- else
- { // use normal turning mode
- doSetVoltageToneFrontend=false;
- doSetFrontend=false;
- eSecCommand::rotor cmd;
- eSecCommand::pair compare;
- compare.voltage = VOLTAGE(13);
- compare.steps = +3;
- sec_sequence.push_back( eSecCommand(eSecCommand::IF_VOLTAGE_GOTO, compare) );
- sec_sequence.push_back( eSecCommand(eSecCommand::SET_VOLTAGE, compare.voltage) );
- sec_sequence.push_back( eSecCommand(eSecCommand::SLEEP, m_params[DELAY_AFTER_VOLTAGE_CHANGE_BEFORE_MOTOR_CMD]) ); // wait 150msec after voltage change
-
- sec_sequence.push_back( eSecCommand(eSecCommand::INVALIDATE_CURRENT_ROTORPARMS) );
- sec_sequence.push_back( eSecCommand(eSecCommand::SET_ROTOR_MOVING) );
- sec_sequence.push_back( eSecCommand(eSecCommand::SEND_DISEQC, diseqc) );
-
- compare.voltage = voltage;
- compare.steps = +3;
- sec_sequence.push_back( eSecCommand(eSecCommand::IF_VOLTAGE_GOTO, compare) ); // correct final voltage?
- sec_sequence.push_back( eSecCommand(eSecCommand::SLEEP, 2000) ); // wait 2 second before set high voltage
- sec_sequence.push_back( eSecCommand(eSecCommand::SET_VOLTAGE, voltage) );
-
- compare.tone = tone;
- sec_sequence.push_back( eSecCommand(eSecCommand::IF_TONE_GOTO, compare) );
- sec_sequence.push_back( eSecCommand(eSecCommand::SET_TONE, tone) );
- sec_sequence.push_back( eSecCommand(eSecCommand::SLEEP, m_params[DELAY_AFTER_CONT_TONE]) );
- sec_sequence.push_back( eSecCommand(eSecCommand::SET_FRONTEND) );
-
- cmd.direction=1; // check for running rotor
- cmd.deltaA=0;
- cmd.steps=+3;
- cmd.okcount=0;
- sec_sequence.push_back( eSecCommand(eSecCommand::SET_TIMEOUT, m_params[MOTOR_RUNNING_TIMEOUT]*4) ); // 2 minutes running timeout
- sec_sequence.push_back( eSecCommand(eSecCommand::SLEEP, 250) ); // 250msec delay
- sec_sequence.push_back( eSecCommand(eSecCommand::IF_TUNER_LOCKED_GOTO, cmd ) );
- sec_sequence.push_back( eSecCommand(eSecCommand::IF_TIMEOUT_GOTO, +3 ) );
- sec_sequence.push_back( eSecCommand(eSecCommand::GOTO, -3) ); // goto loop start
- sec_sequence.push_back( eSecCommand(eSecCommand::UPDATE_CURRENT_ROTORPARAMS) );
- sec_sequence.push_back( eSecCommand(eSecCommand::SET_ROTOR_STOPPED) );
- sec_sequence.push_back( eSecCommand(eSecCommand::GOTO, +3) );
- sec_sequence.push_back( eSecCommand(eSecCommand::SET_FRONTEND) );
- sec_sequence.push_back( eSecCommand(eSecCommand::GOTO, -4) );
+ if(lnb_param.SatCR_idx == -1)
+ {
+ int mrt = m_params[MOTOR_RUNNING_TIMEOUT]; // in seconds!
+ if ( rotor_param.m_inputpower_parameters.m_use )
+ { // use measure rotor input power to detect rotor state
+ bool turn_fast = need_turn_fast(rotor_param.m_inputpower_parameters.m_turning_speed);
+ eSecCommand::rotor cmd;
+ eSecCommand::pair compare;
+ if (turn_fast)
+ compare.voltage = VOLTAGE(18);
+ else
+ compare.voltage = VOLTAGE(13);
+ compare.steps = +3;
+ sec_sequence.push_back( eSecCommand(eSecCommand::IF_VOLTAGE_GOTO, compare) );
+ sec_sequence.push_back( eSecCommand(eSecCommand::SET_VOLTAGE, compare.voltage) );
+ // measure idle power values
+ compare.steps = -2;
+ if (turn_fast) {
+ sec_sequence.push_back( eSecCommand(eSecCommand::SLEEP, m_params[DELAY_AFTER_VOLTAGE_CHANGE_BEFORE_MEASURE_IDLE_INPUTPOWER]) ); // wait 150msec after voltage change
+ sec_sequence.push_back( eSecCommand(eSecCommand::MEASURE_IDLE_INPUTPOWER, 1) );
+ compare.val = 1;
+ sec_sequence.push_back( eSecCommand(eSecCommand::IF_MEASURE_IDLE_WAS_NOT_OK_GOTO, compare) );
+ sec_sequence.push_back( eSecCommand(eSecCommand::SET_VOLTAGE, VOLTAGE(13)) );
+ }
+ sec_sequence.push_back( eSecCommand(eSecCommand::SLEEP, m_params[DELAY_AFTER_VOLTAGE_CHANGE_BEFORE_MEASURE_IDLE_INPUTPOWER]) ); // wait 150msec before measure
+ sec_sequence.push_back( eSecCommand(eSecCommand::MEASURE_IDLE_INPUTPOWER, 0) );
+ compare.val = 0;
+ sec_sequence.push_back( eSecCommand(eSecCommand::IF_MEASURE_IDLE_WAS_NOT_OK_GOTO, compare) );
+ ////////////////////////////
+ sec_sequence.push_back( eSecCommand(eSecCommand::SET_ROTOR_DISEQC_RETRYS, m_params[MOTOR_COMMAND_RETRIES]) ); // 2 retries
+ sec_sequence.push_back( eSecCommand(eSecCommand::INVALIDATE_CURRENT_ROTORPARMS) );
+ sec_sequence.push_back( eSecCommand(eSecCommand::SEND_DISEQC, diseqc) );
+ sec_sequence.push_back( eSecCommand(eSecCommand::SET_TIMEOUT, 40) ); // 2 seconds rotor start timout
+ // rotor start loop
+ sec_sequence.push_back( eSecCommand(eSecCommand::SLEEP, 50) ); // 50msec delay
+ sec_sequence.push_back( eSecCommand(eSecCommand::MEASURE_RUNNING_INPUTPOWER) );
+ cmd.direction=1; // check for running rotor
+ cmd.deltaA=rotor_param.m_inputpower_parameters.m_delta;
+ cmd.steps=+5;
+ cmd.okcount=0;
+ sec_sequence.push_back( eSecCommand(eSecCommand::IF_INPUTPOWER_DELTA_GOTO, cmd ) ); // check if rotor has started
+ sec_sequence.push_back( eSecCommand(eSecCommand::IF_TIMEOUT_GOTO, +2 ) ); // timeout .. we assume now the rotor is already at the correct position
+ sec_sequence.push_back( eSecCommand(eSecCommand::GOTO, -4) ); // goto loop start
+ sec_sequence.push_back( eSecCommand(eSecCommand::IF_NO_MORE_ROTOR_DISEQC_RETRYS_GOTO, turn_fast ? 10 : 9 ) ); // timeout .. we assume now the rotor is already at the correct position
+ sec_sequence.push_back( eSecCommand(eSecCommand::GOTO, -8) ); // goto loop start
+ ////////////////////
+ sec_sequence.push_back( eSecCommand(eSecCommand::SET_ROTOR_MOVING) );
+ if (turn_fast)
+ sec_sequence.push_back( eSecCommand(eSecCommand::SET_VOLTAGE, VOLTAGE(18)) );
+ sec_sequence.push_back( eSecCommand(eSecCommand::SET_TIMEOUT, mrt*20) ); // mrt is in seconds... our SLEEP time is 50ms.. so * 20
+ // rotor running loop
+ sec_sequence.push_back( eSecCommand(eSecCommand::SLEEP, 50) ); // wait 50msec
+ sec_sequence.push_back( eSecCommand(eSecCommand::MEASURE_RUNNING_INPUTPOWER) );
+ cmd.direction=0; // check for stopped rotor
+ cmd.steps=+3;
+ sec_sequence.push_back( eSecCommand(eSecCommand::IF_INPUTPOWER_DELTA_GOTO, cmd ) );
+ sec_sequence.push_back( eSecCommand(eSecCommand::IF_TIMEOUT_GOTO, +2 ) ); // timeout ? this should never happen
+ sec_sequence.push_back( eSecCommand(eSecCommand::GOTO, -4) ); // running loop start
+ /////////////////////
+ sec_sequence.push_back( eSecCommand(eSecCommand::UPDATE_CURRENT_ROTORPARAMS) );
+ sec_sequence.push_back( eSecCommand(eSecCommand::SET_ROTOR_STOPPED) );
+ }
+ else
+ { // use normal turning mode
+ if (curRotorPos != -1)
+ {
+ mrt = abs(curRotorPos - sat.orbital_position);
+ if (mrt > 1800)
+ mrt = 3600 - mrt;
+ if (mrt % 10)
+ mrt += 10; // round a little bit
+ mrt *= 2000; // (we assume a very slow rotor with just 0.5 degree per second here)
+ mrt /= 10000;
+ mrt += 3; // a little bit overhead
+ }
+ doSetVoltageToneFrontend=false;
+ doSetFrontend=false;
+ eSecCommand::rotor cmd;
+ eSecCommand::pair compare;
+ compare.voltage = VOLTAGE(13);
+ compare.steps = +3;
+ sec_sequence.push_back( eSecCommand(eSecCommand::IF_VOLTAGE_GOTO, compare) );
+ sec_sequence.push_back( eSecCommand(eSecCommand::SET_VOLTAGE, compare.voltage) );
+ sec_sequence.push_back( eSecCommand(eSecCommand::SLEEP, m_params[DELAY_AFTER_VOLTAGE_CHANGE_BEFORE_MOTOR_CMD]) ); // wait 150msec after voltage change
+
+ sec_sequence.push_back( eSecCommand(eSecCommand::INVALIDATE_CURRENT_ROTORPARMS) );
+ sec_sequence.push_back( eSecCommand(eSecCommand::SET_ROTOR_MOVING) );
+ sec_sequence.push_back( eSecCommand(eSecCommand::SEND_DISEQC, diseqc) );
+ sec_sequence.push_back( eSecCommand(eSecCommand::SLEEP, 1000) ); // sleep one second before change voltage or tone
+
+ compare.voltage = voltage;
+ compare.steps = +3;
+ sec_sequence.push_back( eSecCommand(eSecCommand::IF_VOLTAGE_GOTO, compare) ); // correct final voltage?
+ sec_sequence.push_back( eSecCommand(eSecCommand::SLEEP, 2000) ); // wait 2 second before set high voltage
+ sec_sequence.push_back( eSecCommand(eSecCommand::SET_VOLTAGE, voltage) );
+
+ compare.tone = tone;
+ sec_sequence.push_back( eSecCommand(eSecCommand::IF_TONE_GOTO, compare) );
+ sec_sequence.push_back( eSecCommand(eSecCommand::SET_TONE, tone) );
+ sec_sequence.push_back( eSecCommand(eSecCommand::SLEEP, m_params[DELAY_AFTER_FINAL_CONT_TONE_CHANGE]) );
+ sec_sequence.push_back( eSecCommand(eSecCommand::SET_FRONTEND, 0) );
+
+ cmd.direction=1; // check for running rotor
+ cmd.deltaA=0;
+ cmd.steps = +3;
+ cmd.okcount=0;
+ sec_sequence.push_back( eSecCommand(eSecCommand::SET_TIMEOUT, mrt*4) ); // mrt is in seconds... our SLEEP time is 250ms.. so * 4
+ sec_sequence.push_back( eSecCommand(eSecCommand::SLEEP, 250) ); // 250msec delay
+ sec_sequence.push_back( eSecCommand(eSecCommand::IF_TUNER_LOCKED_GOTO, cmd ) );
+ sec_sequence.push_back( eSecCommand(eSecCommand::IF_TIMEOUT_GOTO, +5 ) );
+ sec_sequence.push_back( eSecCommand(eSecCommand::GOTO, -3) ); // goto loop start
+ sec_sequence.push_back( eSecCommand(eSecCommand::UPDATE_CURRENT_ROTORPARAMS) );
+ sec_sequence.push_back( eSecCommand(eSecCommand::SET_ROTOR_STOPPED) );
+ sec_sequence.push_back( eSecCommand(eSecCommand::GOTO, +4) );
+ sec_sequence.push_back( eSecCommand(eSecCommand::START_TUNE_TIMEOUT, tunetimeout) );
+ sec_sequence.push_back( eSecCommand(eSecCommand::SET_FRONTEND, 1) );
+ sec_sequence.push_back( eSecCommand(eSecCommand::GOTO, -5) );
+ }
+ eDebug("set rotor timeout to %d seconds", mrt);
+ sec_fe->setData(eDVBFrontend::NEW_ROTOR_CMD, RotorCmd);
+ sec_fe->setData(eDVBFrontend::NEW_ROTOR_POS, sat.orbital_position);
}
- sec_fe->setData(eDVBFrontend::NEW_ROTOR_CMD, RotorCmd);
- sec_fe->setData(eDVBFrontend::NEW_ROTOR_POS, sat.orbital_position);
- sendDiSEqC = true;
}
}
}
csw = band;
}
- if (sendDiSEqC)
- sec_sequence.push_front( eSecCommand(eSecCommand::SET_POWER_LIMITING_MODE, eSecCommand::modeStatic) );
-
sec_fe->setData(eDVBFrontend::NEW_CSW, csw);
sec_fe->setData(eDVBFrontend::NEW_UCSW, ucsw);
sec_fe->setData(eDVBFrontend::NEW_TONEBURST, di_param.m_toneburst_param);
- if (doSetVoltageToneFrontend)
+ if ((doSetVoltageToneFrontend) && (lnb_param.SatCR_idx == -1))
{
eSecCommand::pair compare;
compare.voltage = voltage;
compare.tone = tone;
sec_sequence.push_back( eSecCommand(eSecCommand::IF_TONE_GOTO, compare) );
sec_sequence.push_back( eSecCommand(eSecCommand::SET_TONE, tone) );
- sec_sequence.push_back( eSecCommand(eSecCommand::SLEEP, m_params[DELAY_AFTER_CONT_TONE]) );
+ sec_sequence.push_back( eSecCommand(eSecCommand::SLEEP, m_params[DELAY_AFTER_FINAL_CONT_TONE_CHANGE]) );
}
sec_sequence.push_back( eSecCommand(eSecCommand::UPDATE_CURRENT_SWITCHPARMS) );
+ if(lnb_param.SatCR_idx != -1)
+ {
+ // check if voltage is disabled
+ eSecCommand::pair compare;
+ compare.steps = +3;
+ compare.voltage = iDVBFrontend::voltageOff;
+ sec_sequence.push_back( eSecCommand(eSecCommand::IF_NOT_VOLTAGE_GOTO, compare) );
+ sec_sequence.push_back( eSecCommand(eSecCommand::SET_VOLTAGE, iDVBFrontend::voltage13) );
+ sec_sequence.push_back( eSecCommand(eSecCommand::SLEEP, m_params[DELAY_AFTER_ENABLE_VOLTAGE_BEFORE_SWITCH_CMDS] ) );
+
+ sec_sequence.push_back( eSecCommand(eSecCommand::SET_VOLTAGE, iDVBFrontend::voltage18_5) );
+ sec_sequence.push_back( eSecCommand(eSecCommand::SET_TONE, iDVBFrontend::toneOff) );
+ sec_sequence.push_back( eSecCommand(eSecCommand::SLEEP, m_params[DELAY_AFTER_VOLTAGE_CHANGE_BEFORE_SWITCH_CMDS]) ); // wait 20 ms after voltage change
+
+ eDVBDiseqcCommand diseqc;
+ memset(diseqc.data, 0, MAX_DISEQC_LENGTH);
+ diseqc.len = 5;
+ diseqc.data[0] = 0xE0;
+ diseqc.data[1] = 0x10;
+ diseqc.data[2] = 0x5A;
+ diseqc.data[3] = lnb_param.UnicableTuningWord >> 8;
+ diseqc.data[4] = lnb_param.UnicableTuningWord;
+
+ sec_sequence.push_back( eSecCommand(eSecCommand::SEND_DISEQC, diseqc) );
+ sec_sequence.push_back( eSecCommand(eSecCommand::SLEEP, m_params[DELAY_AFTER_LAST_DISEQC_CMD]) );
+ sec_sequence.push_back( eSecCommand(eSecCommand::SET_VOLTAGE, iDVBFrontend::voltage13) );
+ }
+
if (doSetFrontend)
{
sec_sequence.push_back( eSecCommand(eSecCommand::START_TUNE_TIMEOUT, tunetimeout) );
- sec_sequence.push_back( eSecCommand(eSecCommand::SET_FRONTEND) );
+ sec_sequence.push_back( eSecCommand(eSecCommand::SET_FRONTEND, 1) );
}
- if (sendDiSEqC)
- sec_sequence.push_back( eSecCommand(eSecCommand::SET_POWER_LIMITING_MODE, eSecCommand::modeDynamic) );
+ sec_sequence.push_front( eSecCommand(eSecCommand::SET_POWER_LIMITING_MODE, eSecCommand::modeStatic) );
+ sec_sequence.push_back( eSecCommand(eSecCommand::SLEEP, 500) );
+ sec_sequence.push_back( eSecCommand(eSecCommand::SET_POWER_LIMITING_MODE, eSecCommand::modeDynamic) );
frontend.setSecSequence(sec_sequence);
eDebugNoSimulate("found no useable satellite configuration for %s freq %d%s %s on orbital position (%d)",
sat.system ? "DVB-S2" : "DVB-S",
sat.frequency,
- sat.polarisation == eDVBFrontendParametersSatellite::Polarisation::Horizontal ? "H" :
- eDVBFrontendParametersSatellite::Polarisation::Vertical ? "V" :
- eDVBFrontendParametersSatellite::Polarisation::CircularLeft ? "CL" : "CR",
- sat.modulation == eDVBFrontendParametersSatellite::Modulation::Auto ? "AUTO" :
- eDVBFrontendParametersSatellite::Modulation::QPSK ? "QPSK" :
- eDVBFrontendParametersSatellite::Modulation::M8PSK ? "8PSK" : "QAM16",
+ sat.polarisation == eDVBFrontendParametersSatellite::Polarisation_Horizontal ? "H" :
+ eDVBFrontendParametersSatellite::Polarisation_Vertical ? "V" :
+ eDVBFrontendParametersSatellite::Polarisation_CircularLeft ? "CL" : "CR",
+ sat.modulation == eDVBFrontendParametersSatellite::Modulation_Auto ? "AUTO" :
+ eDVBFrontendParametersSatellite::Modulation_QPSK ? "QPSK" :
+ eDVBFrontendParametersSatellite::Modulation_8PSK ? "8PSK" : "QAM16",
sat.orbital_position );
return -1;
}
for (int i=0; i <= m_lnbidx; ++i)
{
m_lnbs[i].m_satellites.clear();
- m_lnbs[i].slot_mask = 0;
+ m_lnbs[i].m_slot_mask = 0;
+ m_lnbs[i].m_prio = -1; // auto
}
m_lnbidx=-1;
for (eSmartPtrList<eDVBRegisteredFrontend>::iterator it(m_avail_frontends.begin()); it != m_avail_frontends.end(); ++it)
{
long tmp;
- if (!strcmp(it->m_frontend->getDescription(), "BCM4501 (internal)") && !it->m_frontend->getData(eDVBFrontend::LINKED_PREV_PTR, tmp) && tmp != -1)
+ char c;
+ if (sscanf(it->m_frontend->getDescription(), "BCM450%c (internal)", &c) == 1 && !it->m_frontend->getData(eDVBFrontend::LINKED_PREV_PTR, tmp) && tmp != -1)
{
FILE *f=fopen("/proc/stb/tsmux/lnb_b_input", "w");
if (!f || fwrite("B", 1, 1, f) != 1)
it->m_frontend->setData(eDVBFrontend::LINKED_NEXT_PTR, -1);
it->m_frontend->setData(eDVBFrontend::ROTOR_POS, -1);
it->m_frontend->setData(eDVBFrontend::ROTOR_CMD, -1);
+ it->m_frontend->setData(eDVBFrontend::SATCR, -1);
}
for (eSmartPtrList<eDVBRegisteredFrontend>::iterator it(m_avail_simulate_frontends.begin()); it != m_avail_simulate_frontends.end(); ++it)
it->m_frontend->setData(eDVBFrontend::LINKED_NEXT_PTR, -1);
it->m_frontend->setData(eDVBFrontend::ROTOR_POS, -1);
it->m_frontend->setData(eDVBFrontend::ROTOR_CMD, -1);
+ it->m_frontend->setData(eDVBFrontend::SATCR, -1);
}
return 0;
{
eSecDebug("eDVBSatelliteEquipmentControl::setLNBSlotMask(%d)", slotmask);
if ( currentLNBValid() )
- m_lnbs[m_lnbidx].slot_mask = slotmask;
+ m_lnbs[m_lnbidx].m_slot_mask = slotmask;
else
return -ENOENT;
return 0;
return 0;
}
+RESULT eDVBSatelliteEquipmentControl::setLNBPrio(int prio)
+{
+ eSecDebug("eDVBSatelliteEquipmentControl::setLNBPrio(%d)", prio);
+ if ( currentLNBValid() )
+ m_lnbs[m_lnbidx].m_prio = prio;
+ else
+ return -ENOENT;
+ return 0;
+}
+
+RESULT eDVBSatelliteEquipmentControl::setLNBNum(int LNBNum)
+{
+ eSecDebug("eDVBSatelliteEquipmentControl::setLNBNum(%d)", LNBNum);
+ if(!((LNBNum >= 1) && (LNBNum <= MAX_LNBNUM)))
+ return -EPERM;
+ if ( currentLNBValid() )
+ m_lnbs[m_lnbidx].LNBNum = LNBNum;
+ else
+ return -ENOENT;
+ return 0;
+}
+
/* DiSEqC Specific Parameters */
RESULT eDVBSatelliteEquipmentControl::setDiSEqCMode(int diseqcmode)
{
return 0;
}
+/* Unicable Specific Parameters */
+RESULT eDVBSatelliteEquipmentControl::setLNBSatCR(int SatCR_idx)
+{
+ eSecDebug("eDVBSatelliteEquipmentControl::setLNBSatCR(%d)", SatCR_idx);
+ if(!((SatCR_idx >=-1) && (SatCR_idx < MAX_SATCR)))
+ return -EPERM;
+ if ( currentLNBValid() )
+ m_lnbs[m_lnbidx].SatCR_idx = SatCR_idx;
+ else
+ return -ENOENT;
+ return 0;
+}
+
+RESULT eDVBSatelliteEquipmentControl::setLNBSatCRvco(int SatCRvco)
+{
+ eSecDebug("eDVBSatelliteEquipmentControl::setLNBSatCRvco(%d)", SatCRvco);
+ if(!((SatCRvco >= 950*1000) && (SatCRvco <= 2150*1000)))
+ return -EPERM;
+ if(!((m_lnbs[m_lnbidx].SatCR_idx >= 0) && (m_lnbs[m_lnbidx].SatCR_idx < MAX_SATCR)))
+ return -ENOENT;
+ if ( currentLNBValid() )
+ m_lnbs[m_lnbidx].SatCRvco = SatCRvco;
+ else
+ return -ENOENT;
+ return 0;
+}
+RESULT eDVBSatelliteEquipmentControl::getLNBSatCR()
+{
+ if ( currentLNBValid() )
+ return m_lnbs[m_lnbidx].SatCR_idx;
+ return -ENOENT;
+}
+
+RESULT eDVBSatelliteEquipmentControl::getLNBSatCRvco()
+{
+ if ( currentLNBValid() )
+ return m_lnbs[m_lnbidx].SatCRvco;
+ return -ENOENT;
+}
+
/* Satellite Specific Parameters */
RESULT eDVBSatelliteEquipmentControl::addSatellite(int orbital_position)
{
if (tu1 != tu2)
{
eDVBRegisteredFrontend *p1=NULL, *p2=NULL;
-
- for (eSmartPtrList<eDVBRegisteredFrontend>::iterator it(m_avail_frontends.begin()); it != m_avail_frontends.end(); ++it)
+ eSmartPtrList<eDVBRegisteredFrontend>::iterator it(m_avail_frontends.begin());
+ for (; it != m_avail_frontends.end(); ++it)
{
if (it->m_frontend->getSlotID() == tu1)
p1 = *it;
}
if (p1 && p2)
{
+ char c;
p1->m_frontend->setData(eDVBFrontend::LINKED_PREV_PTR, (long)p2);
p2->m_frontend->setData(eDVBFrontend::LINKED_NEXT_PTR, (long)p1);
- if (!strcmp(p1->m_frontend->getDescription(), p2->m_frontend->getDescription()) && !strcmp(p1->m_frontend->getDescription(), "BCM4501 (internal)"))
+ if (!strcmp(p1->m_frontend->getDescription(), p2->m_frontend->getDescription()) && sscanf(p1->m_frontend->getDescription(), "BCM450%c (internal)", &c) == 1)
{
FILE *f=fopen("/proc/stb/tsmux/lnb_b_input", "w");
if (!f || fwrite("A", 1, 1, f) != 1)
}
p1=p2=NULL;
- for (eSmartPtrList<eDVBRegisteredFrontend>::iterator it(m_avail_simulate_frontends.begin()); it != m_avail_simulate_frontends.end(); ++it)
+ it=m_avail_simulate_frontends.begin();
+ for (; it != m_avail_simulate_frontends.end(); ++it)
{
if (it->m_frontend->getSlotID() == tu1)
p1 = *it;
return m_rotorMoving;
}
-void eDVBSatelliteEquipmentControl::setRotorMoving(bool b)
+void eDVBSatelliteEquipmentControl::setRotorMoving(int slot_no, bool b)
{
- m_rotorMoving=b;
+ if (b)
+ m_rotorMoving |= (1 << slot_no);
+ else
+ m_rotorMoving &= ~(1 << slot_no);
}
git.cweiske.de / enigma2.git / blobdiff