m_params[param]=value;
}
-eDVBSatelliteEquipmentControl::eDVBSatelliteEquipmentControl(eSmartPtrList<eDVBRegisteredFrontend> &avail_frontends)
- :m_lnbidx(-1), m_curSat(m_lnbs[0].m_satellites.end()), m_avail_frontends(avail_frontends), m_rotorMoving(false)
+eDVBSatelliteEquipmentControl::eDVBSatelliteEquipmentControl(eSmartPtrList<eDVBRegisteredFrontend> &avail_frontends, eSmartPtrList<eDVBRegisteredFrontend> &avail_simulate_frontends)
+ :m_lnbidx(-1), m_curSat(m_lnbs[0].m_satellites.end()), m_avail_frontends(avail_frontends), m_avail_simulate_frontends(avail_simulate_frontends), m_rotorMoving(false)
{
if (!instance)
instance = this;
setRotorPosNum(1); // stored pos 1
}
+#define eSecDebugNoSimulate(x...) \
+ do { \
+ if (!simulate) \
+ eSecDebug(x); \
+ } while(0)
+// else \
+// { \
+// eDebugNoNewLine("SIMULATE:"); \
+// eDebug(x); \
+// } \
+
int eDVBSatelliteEquipmentControl::canTune(const eDVBFrontendParametersSatellite &sat, iDVBFrontend *fe, int slot_id, int *highest_score_lnb)
{
+ bool simulate = ((eDVBFrontend*)fe)->is_simulate();
+ bool direct_connected = m_not_linked_slot_mask & slot_id;
int score=0, satcount=0;
if (highest_score_lnb)
*highest_score_lnb = -1;
+ eSecDebugNoSimulate("canTune %d", slot_id);
+
for (int idx=0; idx <= m_lnbidx; ++idx )
{
bool rotor=false;
int ret = 0;
eDVBSatelliteDiseqcParameters &di_param = lnb_param.m_diseqc_parameters;
+ eSecDebugNoSimulate("lnb %d found", idx);
+
satcount += lnb_param.m_satellites.size();
std::map<int, eDVBSatelliteSwitchParameters>::iterator sit =
if ( sit != lnb_param.m_satellites.end())
{
bool diseqc=false;
- bool direct_connected = m_not_linked_slot_mask & slot_id;
long band=0,
linked_prev_ptr=-1,
linked_next_ptr=-1,
toneburst = di_param.m_toneburst_param,
curRotorPos;
+ eSecDebugNoSimulate("sat %d found", sat.orbital_position);
fe->getData(eDVBFrontend::LINKED_PREV_PTR, linked_prev_ptr);
fe->getData(eDVBFrontend::SATPOS_DEPENDS_PTR, satpos_depends_ptr);
ret = 15000;
}
+ eSecDebugNoSimulate("ret1 %d", ret);
+
if (direct_connected) // frontend with direct connection?
{
long ocsw = -1,
oucsw = -1,
oToneburst = -1;
+ eSecDebugNoSimulate("direct");
fe->getData(eDVBFrontend::ROTOR_POS, curRotorPos);
fe->getData(eDVBFrontend::LINKED_NEXT_PTR, linked_next_ptr);
fe->getData(eDVBFrontend::CSW, ocsw);
}
linked_fe->m_frontend->getData(eDVBFrontend::LINKED_PREV_PTR, (long&)linked_prev_ptr);
}
+ eSecDebugNoSimulate("ret2 %d", ret);
while (ret && linked_next_ptr != -1) // check for linked tuners..
{
eDVBRegisteredFrontend *linked_fe = (eDVBRegisteredFrontend*) linked_next_ptr;
}
linked_fe->m_frontend->getData(eDVBFrontend::LINKED_NEXT_PTR, (long&)linked_next_ptr);
}
+ eSecDebugNoSimulate("ret3 %d", ret);
}
else // linked frontend..
{
sec_fe->getData(eDVBFrontend::CSW, ocsw);
sec_fe->getData(eDVBFrontend::UCSW, oucsw);
sec_fe->getData(eDVBFrontend::TONEBURST, oToneburst);
+ eSecDebug("(%ld != %ld) || \n(%d && (%ld != %ld || %ld != %ld) ) ||\n( %d && %ld != %d ) )",
+ csw, ocsw, diseqc, ucsw, oucsw, toneburst, oToneburst, rotor, curRotorPos, sat.orbital_position);
if ( (csw != ocsw) ||
( diseqc && (ucsw != oucsw || toneburst != oToneburst) ) ||
( rotor && curRotorPos != sat.orbital_position ) )
}
}
}
- }
-
- if (ret && rotor && curRotorPos != -1 && direct_connected) {
- ret -= abs(curRotorPos-sat.orbital_position);
+ eSecDebugNoSimulate("ret4 %d", ret);
}
if (ret)
if (satpos_depends_ptr != -1)
{
+ eSecDebugNoSimulate("satpos depends");
eDVBRegisteredFrontend *satpos_depends_to_fe = (eDVBRegisteredFrontend*) satpos_depends_ptr;
if ( satpos_depends_to_fe->m_inuse )
{
if (!rotor || curRotorPos != sat.orbital_position)
ret=0;
}
+ eSecDebugNoSimulate("ret5 %d", ret);
}
+ if (ret && rotor && curRotorPos != -1 && (direct_connected || satpos_depends_ptr == -1) ) // direct conntected or loopthrough!
+ ret -= abs(curRotorPos-sat.orbital_position);
+
+ eSecDebugNoSimulate("ret6 %d", ret);
+
if (ret)
{
int lof = sat.frequency > lnb_param.m_lof_threshold ?
ret=0;
}
+ eSecDebugNoSimulate("ret %d, score old %d", ret, score);
if (ret > score)
{
score = ret;
if (highest_score_lnb)
*highest_score_lnb = idx;
}
+ eSecDebugNoSimulate("score new %d", score);
}
}
}
if (score && satcount)
score -= (satcount-1);
- if (score && m_not_linked_slot_mask & slot_id)
+ if (score && direct_connected)
score += 5; // increase score for tuners with direct sat connection
+ eSecDebugNoSimulate("final score %d", score);
return score;
}
#define VOLTAGE(x) (lnb_param.m_increased_voltage ? iDVBFrontend::voltage##x##_5 : iDVBFrontend::voltage##x)
+#define eDebugNoSimulate(x...) \
+ do { \
+ if (!simulate) \
+ eDebug(x); \
+ } while(0)
+// else \
+// { \
+// eDebugNoNewLine("SIMULATE:"); \
+// eDebug(x); \
+// } \
+
RESULT eDVBSatelliteEquipmentControl::prepare(iDVBFrontend &frontend, FRONTENDPARAMETERS &parm, const eDVBFrontendParametersSatellite &sat, int slot_id, unsigned int tunetimeout)
{
+ bool simulate = ((eDVBFrontend*)&frontend)->is_simulate();
int lnb_idx = -1;
if (canTune(sat, &frontend, slot_id, &lnb_idx))
{
bool doSetFrontend = true;
bool doSetVoltageToneFrontend = true;
bool sendDiSEqC = false;
+ bool forceChanged = false;
+ bool needDiSEqCReset = false;
long band=0,
voltage = iDVBFrontend::voltageOff,
tone = iDVBFrontend::toneOff,
curRotorPos = -1,
satposDependPtr = -1;
iDVBFrontend *sec_fe=&frontend;
+ eDVBRegisteredFrontend *linked_fe = 0;
eDVBSatelliteDiseqcParameters::t_diseqc_mode diseqc_mode = di_param.m_diseqc_mode;
+ eDVBSatelliteSwitchParameters::t_voltage_mode voltage_mode = sw_param.m_voltage_mode;
+ bool diseqc13V = voltage_mode == eDVBSatelliteSwitchParameters::HV_13;
+
+ if (diseqc13V)
+ voltage_mode = eDVBSatelliteSwitchParameters::HV;
frontend.getData(eDVBFrontend::SATPOS_DEPENDS_PTR, satposDependPtr);
frontend.getData(eDVBFrontend::LINKED_PREV_PTR, linked_prev_ptr);
while (linked_prev_ptr != -1)
{
- eDVBRegisteredFrontend *linked_fe = (eDVBRegisteredFrontend*) linked_prev_ptr;
+ linked_fe = (eDVBRegisteredFrontend*) linked_prev_ptr;
sec_fe = linked_fe->m_frontend;
sec_fe->getData(eDVBFrontend::LINKED_PREV_PTR, (long&)linked_prev_ptr);
}
if (satposDependPtr != -1) // we dont need uncommitted switch and rotor cmds on second output of a rotor lnb
diseqc_mode = eDVBSatelliteDiseqcParameters::V1_0;
+ else {
+ // in eDVBFrontend::tuneLoop we call closeFrontend and ->inc_use() in this this condition (to put the kernel frontend thread into idle state)
+ // so we must resend all diseqc stuff (voltage is disabled when the frontend is closed)
+ int state;
+ sec_fe->getState(state);
+ if (!linked_fe->m_inuse && state != eDVBFrontend::stateIdle)
+ forceChanged = true;
+ }
}
sec_fe->getData(eDVBFrontend::CSW, lastcsw);
sec_fe->getData(eDVBFrontend::ROTOR_CMD, lastRotorCmd);
sec_fe->getData(eDVBFrontend::ROTOR_POS, curRotorPos);
+ if (lastcsw == lastucsw && lastToneburst == lastucsw && lastucsw == -1)
+ needDiSEqCReset = true;
+
if ( sat.frequency > lnb_param.m_lof_threshold )
band |= 1;
if (!(sat.polarisation & eDVBFrontendParametersSatellite::Polarisation::Vertical))
band |= 2;
- if ( sw_param.m_voltage_mode == eDVBSatelliteSwitchParameters::_14V
+ if ( voltage_mode == eDVBSatelliteSwitchParameters::_14V
|| ( sat.polarisation & eDVBFrontendParametersSatellite::Polarisation::Vertical
- && sw_param.m_voltage_mode == eDVBSatelliteSwitchParameters::HV ) )
+ && voltage_mode == eDVBSatelliteSwitchParameters::HV ) )
voltage = VOLTAGE(13);
- else if ( sw_param.m_voltage_mode == eDVBSatelliteSwitchParameters::_18V
+ else if ( voltage_mode == eDVBSatelliteSwitchParameters::_18V
|| ( !(sat.polarisation & eDVBFrontendParametersSatellite::Polarisation::Vertical)
- && sw_param.m_voltage_mode == eDVBSatelliteSwitchParameters::HV ) )
+ && voltage_mode == eDVBSatelliteSwitchParameters::HV ) )
voltage = VOLTAGE(18);
if ( (sw_param.m_22khz_signal == eDVBSatelliteSwitchParameters::ON)
|| ( sw_param.m_22khz_signal == eDVBSatelliteSwitchParameters::HILO && (band&1) ) )
bool send_csw =
(di_param.m_committed_cmd != eDVBSatelliteDiseqcParameters::SENDNO);
- bool changed_csw = send_csw && csw != lastcsw;
+ bool changed_csw = send_csw && (forceChanged || csw != lastcsw);
bool send_ucsw =
(di_param.m_uncommitted_cmd && diseqc_mode > eDVBSatelliteDiseqcParameters::V1_0);
- bool changed_ucsw = send_ucsw && ucsw != lastucsw;
+ bool changed_ucsw = send_ucsw && (forceChanged || ucsw != lastucsw);
bool send_burst =
(di_param.m_toneburst_param != eDVBSatelliteDiseqcParameters::NO);
- bool changed_burst = send_burst && toneburst != lastToneburst;
+ bool changed_burst = send_burst && (forceChanged || toneburst != lastToneburst);
int send_mask = 0; /*
1 must send csw
&& di_param.m_committed_cmd < eDVBSatelliteDiseqcParameters::SENDNO
&& (lastcsw & 0xF0)
&& ((csw / 4) == (lastcsw / 4)) )
- eDebug("dont send committed cmd (fast diseqc)");
+ eDebugNoSimulate("dont send committed cmd (fast diseqc)");
else
{
send_mask |= 1;
RotorCmd=sw_param.m_rotorPosNum;
else // we must calc gotoxx cmd
{
- eDebug("Entry for %d,%d? not in Rotor Table found... i try gotoXX?", sat.orbital_position / 10, sat.orbital_position % 10 );
+ eDebugNoSimulate("Entry for %d,%d? not in Rotor Table found... i try gotoXX?", sat.orbital_position / 10, sat.orbital_position % 10 );
useGotoXX = true;
double SatLon = abs(sat.orbital_position)/10.00,
if ( rotor_param.m_gotoxx_parameters.m_lo_direction == eDVBSatelliteRotorParameters::WEST )
SiteLon = 360 - SiteLon;
- eDebug("siteLatitude = %lf, siteLongitude = %lf, %lf degrees", SiteLat, SiteLon, SatLon );
+ eDebugNoSimulate("siteLatitude = %lf, siteLongitude = %lf, %lf degrees", SiteLat, SiteLon, SatLon );
double satHourAngle =
calcSatHourangle( SatLon, SiteLat, SiteLon );
- eDebug("PolarmountHourAngle=%lf", satHourAngle );
+ eDebugNoSimulate("PolarmountHourAngle=%lf", satHourAngle );
static int gotoXTable[10] =
{ 0x00, 0x02, 0x03, 0x05, 0x06, 0x08, 0x0A, 0x0B, 0x0D, 0x0E };
RotorCmd |= 0xE000;
}
}
- eDebug("RotorCmd = %04x", RotorCmd);
+ eDebugNoSimulate("RotorCmd = %04x", RotorCmd);
}
}
sec_sequence.push_back( eSecCommand(eSecCommand::SET_TONE, iDVBFrontend::toneOff) );
sec_sequence.push_back( eSecCommand(eSecCommand::SLEEP, m_params[DELAY_AFTER_CONT_TONE]) );
- if ( RotorCmd != -1 && RotorCmd != lastRotorCmd )
+ if (diseqc13V)
+ vlt = iDVBFrontend::voltage13;
+ else if ( RotorCmd != -1 && RotorCmd != lastRotorCmd )
{
if (rotor_param.m_inputpower_parameters.m_use)
vlt = VOLTAGE(18); // in input power mode set 18V for measure input power
sec_sequence.push_back( eSecCommand(eSecCommand::SLEEP, m_params[DELAY_AFTER_ENABLE_VOLTAGE_BEFORE_SWITCH_CMDS]) );
sec_sequence.push_back( eSecCommand(eSecCommand::INVALIDATE_CURRENT_SWITCHPARMS) );
+ if (needDiSEqCReset)
+ {
+ eDVBDiseqcCommand diseqc;
+ memset(diseqc.data, 0, MAX_DISEQC_LENGTH);
+ diseqc.len = 3;
+ diseqc.data[0] = 0xE0;
+ diseqc.data[1] = 0;
+ diseqc.data[2] = 0;
+ // diseqc reset
+ sec_sequence.push_back( eSecCommand(eSecCommand::SEND_DISEQC, diseqc) );
+ sec_sequence.push_back( eSecCommand(eSecCommand::SLEEP, m_params[DELAY_AFTER_DISEQC_RESET_CMD]) );
+ diseqc.data[2] = 3;
+ // diseqc peripherial powersupply on
+ sec_sequence.push_back( eSecCommand(eSecCommand::SEND_DISEQC, diseqc) );
+ sec_sequence.push_back( eSecCommand(eSecCommand::SLEEP, m_params[DELAY_AFTER_DISEQC_PERIPHERIAL_POWERON_CMD]) );
+ }
+
for (int seq_repeat = 0; seq_repeat < (di_param.m_seq_repeat?2:1); ++seq_repeat)
{
if ( send_mask & 4 )
sec_sequence.push_back( eSecCommand(eSecCommand::SEND_TONEBURST, di_param.m_toneburst_param) );
sec_sequence.push_back( eSecCommand(eSecCommand::SLEEP, m_params[DELAY_AFTER_TONEBURST]) );
}
+
+ if (di_param.m_seq_repeat && seq_repeat == 0)
+ sec_sequence.push_back( eSecCommand(eSecCommand::SLEEP, m_params[DELAY_BEFORE_SEQUENCE_REPEAT]) );
}
sendDiSEqC = true;
}
- eDebug("RotorCmd %02x, lastRotorCmd %02lx", RotorCmd, lastRotorCmd);
+ eDebugNoSimulate("RotorCmd %02x, lastRotorCmd %02lx", RotorCmd, lastRotorCmd);
if ( RotorCmd != -1 && RotorCmd != lastRotorCmd )
{
eSecCommand::pair compare;
csw = band;
}
- if (sendDiSEqC)
- sec_sequence.push_front( eSecCommand(eSecCommand::SET_POWER_LIMITING_MODE, eSecCommand::modeStatic) );
+// if (sendDiSEqC)
+ sec_sequence.push_front( eSecCommand(eSecCommand::SET_POWER_LIMITING_MODE, eSecCommand::modeStatic) );
sec_fe->setData(eDVBFrontend::NEW_CSW, csw);
sec_fe->setData(eDVBFrontend::NEW_UCSW, ucsw);
sec_sequence.push_back( eSecCommand(eSecCommand::SET_FRONTEND) );
}
- if (sendDiSEqC)
- sec_sequence.push_back( eSecCommand(eSecCommand::SET_POWER_LIMITING_MODE, eSecCommand::modeDynamic) );
+// if (sendDiSEqC)
+ sec_sequence.push_back( eSecCommand(eSecCommand::SLEEP, 50) );
+ sec_sequence.push_back( eSecCommand(eSecCommand::SET_POWER_LIMITING_MODE, eSecCommand::modeDynamic) );
frontend.setSecSequence(sec_sequence);
return 0;
}
}
- eDebug("found no useable satellite configuration for %s freq %d%s %s on orbital position (%d)",
+ eDebugNoSimulate("found no useable satellite configuration for %s freq %d%s %s on orbital position (%d)",
sat.system ? "DVB-S2" : "DVB-S",
sat.frequency,
sat.polarisation == eDVBFrontendParametersSatellite::Polarisation::Horizontal ? "H" :
it->m_frontend->setData(eDVBFrontend::ROTOR_CMD, -1);
}
+ for (eSmartPtrList<eDVBRegisteredFrontend>::iterator it(m_avail_simulate_frontends.begin()); it != m_avail_simulate_frontends.end(); ++it)
+ {
+ it->m_frontend->setData(eDVBFrontend::SATPOS_DEPENDS_PTR, -1);
+ it->m_frontend->setData(eDVBFrontend::LINKED_PREV_PTR, -1);
+ it->m_frontend->setData(eDVBFrontend::LINKED_NEXT_PTR, -1);
+ it->m_frontend->setData(eDVBFrontend::ROTOR_POS, -1);
+ it->m_frontend->setData(eDVBFrontend::ROTOR_CMD, -1);
+ }
+
return 0;
}
fclose(f);
}
}
+ }
+
+ p1=p2=NULL;
+ for (eSmartPtrList<eDVBRegisteredFrontend>::iterator it(m_avail_simulate_frontends.begin()); it != m_avail_simulate_frontends.end(); ++it)
+ {
+ if (it->m_frontend->getSlotID() == tu1)
+ p1 = *it;
+ else if (it->m_frontend->getSlotID() == tu2)
+ p2 = *it;
+ }
+ if (p1 && p2)
+ {
+ p1->m_frontend->setData(eDVBFrontend::LINKED_PREV_PTR, (long)p2);
+ p2->m_frontend->setData(eDVBFrontend::LINKED_NEXT_PTR, (long)p1);
return 0;
}
}
p2 = *it;
}
if (p1 && p2)
+ {
+ p1->m_frontend->setData(eDVBFrontend::SATPOS_DEPENDS_PTR, (long)p2);
+ p2->m_frontend->setData(eDVBFrontend::SATPOS_DEPENDS_PTR, (long)p1);
+ }
+
+ p1=p2=NULL;
+ for (eSmartPtrList<eDVBRegisteredFrontend>::iterator it(m_avail_simulate_frontends.begin()); it != m_avail_simulate_frontends.end(); ++it)
+ {
+ if (it->m_frontend->getSlotID() == tu1)
+ p1 = *it;
+ else if (it->m_frontend->getSlotID() == tu2)
+ p2 = *it;
+ }
+ if (p1 && p2)
{
p1->m_frontend->setData(eDVBFrontend::SATPOS_DEPENDS_PTR, (long)p2);
p2->m_frontend->setData(eDVBFrontend::SATPOS_DEPENDS_PTR, (long)p1);
return 0;
}
+
return -1;
}
git.cweiske.de / enigma2.git / blobdiff