from Screen import Screen
-from ServiceScan import *
-from Components.config import *
-from Components.ActionMap import NumberActionMap
-from Components.ConfigList import ConfigList
-from Components.config import config
-from Components.config import getConfigListEntry
-from Components.NimManager import nimmanager
+from Screens.DefaultWizard import DefaultWizard
+from ServiceScan import ServiceScan
+from Components.config import config, ConfigSubsection, ConfigSelection, \
+ ConfigYesNo, ConfigInteger, getConfigListEntry, ConfigSlider, ConfigEnableDisable
+from Components.ActionMap import NumberActionMap, ActionMap
+from Components.ConfigList import ConfigListScreen
+from Components.NimManager import nimmanager, getConfigSatlist
from Components.Label import Label
-from enigma import eDVBFrontendParametersSatellite, eComponentScan
+from Tools.Directories import resolveFilename, SCOPE_DEFAULTPARTITIONMOUNTDIR, SCOPE_DEFAULTDIR, SCOPE_DEFAULTPARTITION
+from Screens.MessageBox import MessageBox
+from enigma import eTimer, eDVBFrontendParametersSatellite, eComponentScan, \
+ eDVBSatelliteEquipmentControl, eDVBFrontendParametersTerrestrial, \
+ eDVBFrontendParametersCable, eConsoleAppContainer, eDVBResourceManager
+
+def buildTerTransponder(frequency,
+ inversion=2, bandwidth = 3, fechigh = 6, feclow = 6,
+ modulation = 2, transmission = 2, guard = 4,
+ hierarchy = 4):
+# print "freq", frequency, "inv", inversion, "bw", bandwidth, "fech", fechigh, "fecl", feclow, "mod", modulation, "tm", transmission, "guard", guard, "hierarchy", hierarchy
+ parm = eDVBFrontendParametersTerrestrial()
+ parm.frequency = frequency
+ parm.inversion = inversion
+ parm.bandwidth = bandwidth
+ parm.code_rate_HP = fechigh
+ parm.code_rate_LP = feclow
+ parm.modulation = modulation
+ parm.transmission_mode = transmission
+ parm.guard_interval = guard
+ parm.hierarchy = hierarchy
+ return parm
def getInitialTransponderList(tlist, pos):
- print "pos", pos
list = nimmanager.getTransponders(pos)
-
for x in list:
if x[0] == 0: #SAT
parm = eDVBFrontendParametersSatellite()
parm.frequency = x[1]
parm.symbol_rate = x[2]
- parm.polarisation = x[3] # eDVBFrontendParametersSatellite.Polarisation.Vertical
- parm.fec = x[4] # eDVBFrontendParametersSatellite.FEC.f3_4;
- #parm.fec = 6 # AUTO
- #parm.inversion = 1 #eDVBFrontendParametersSatellite.Inversion.Off;
- parm.inversion = 2 #AUTO
+ parm.polarisation = x[3]
+ parm.fec = x[4]
+ parm.inversion = x[7]
parm.orbital_position = pos
+ parm.system = x[5]
+ parm.modulation = x[6]
+ parm.rolloff = x[8]
+ parm.pilot = x[9]
+ tlist.append(parm)
+
+def getInitialCableTransponderList(tlist, nim):
+ list = nimmanager.getTranspondersCable(nim)
+ for x in list:
+ if x[0] == 1: #CABLE
+ parm = eDVBFrontendParametersCable()
+ parm.frequency = x[1]
+ parm.symbol_rate = x[2]
+ parm.modulation = x[3]
+ parm.fec_inner = x[4]
+ parm.inversion = parm.Inversion_Unknown
+ #print "frequency:", x[1]
+ #print "symbol_rate:", x[2]
+ #print "modulation:", x[3]
+ #print "fec_inner:", x[4]
+ #print "inversion:", 2
+ tlist.append(parm)
+
+def getInitialTerrestrialTransponderList(tlist, region):
+ list = nimmanager.getTranspondersTerrestrial(region)
+
+ #self.transponders[self.parsedTer].append((2,freq,bw,const,crh,crl,guard,transm,hierarchy,inv))
+
+ #def buildTerTransponder(frequency, inversion = 2, bandwidth = 3, fechigh = 6, feclow = 6,
+ #modulation = 2, transmission = 2, guard = 4, hierarchy = 4):
+
+ for x in list:
+ if x[0] == 2: #TERRESTRIAL
+ parm = buildTerTransponder(x[1], x[9], x[2], x[4], x[5], x[3], x[7], x[6], x[8])
tlist.append(parm)
-class ScanSetup(Screen):
+cable_bands = {
+ "DVBC_BAND_EU_VHF_I" : 1 << 0,
+ "DVBC_BAND_EU_MID" : 1 << 1,
+ "DVBC_BAND_EU_VHF_III" : 1 << 2,
+ "DVBC_BAND_EU_SUPER" : 1 << 3,
+ "DVBC_BAND_EU_HYPER" : 1 << 4,
+ "DVBC_BAND_EU_UHF_IV" : 1 << 5,
+ "DVBC_BAND_EU_UHF_V" : 1 << 6,
+ "DVBC_BAND_US_LO" : 1 << 7,
+ "DVBC_BAND_US_MID" : 1 << 8,
+ "DVBC_BAND_US_HI" : 1 << 9,
+ "DVBC_BAND_US_SUPER" : 1 << 10,
+ "DVBC_BAND_US_HYPER" : 1 << 11,
+}
+
+class CableTransponderSearchSupport:
+# def setCableTransponderSearchResult(self, tlist):
+# pass
+
+# def cableTransponderSearchFinished(self):
+# pass
+
+ def tryGetRawFrontend(self, feid):
+ res_mgr = eDVBResourceManager.getInstance()
+ if res_mgr:
+ raw_channel = res_mgr.allocateRawChannel(self.feid)
+ if raw_channel:
+ frontend = raw_channel.getFrontend()
+ if frontend:
+ del frontend
+ del raw_channel
+ return True
+ return False
+
+ def cableTransponderSearchSessionClosed(self, *val):
+ print "cableTransponderSearchSessionClosed, val", val
+ self.cable_search_container.appClosed.remove(self.cableTransponderSearchClosed)
+ self.cable_search_container.dataAvail.remove(self.getCableTransponderData)
+ self.cable_search_container = None
+ self.cable_search_session = None
+ if val and len(val) and val[0]:
+ self.setCableTransponderSearchResult(self.__tlist)
+ self.__tlist = None
+ self.cableTransponderSearchFinished()
+
+ def cableTransponderSearchClosed(self, retval):
+ print "cableTransponderSearch finished", retval
+ self.cable_search_session.close(True)
+
+ def getCableTransponderData(self, str):
+ data = str.split()
+ if len(data):
+ if data[0] == 'OK':
+ print str
+ parm = eDVBFrontendParametersCable()
+ qam = { "QAM16" : parm.Modulation_QAM16,
+ "QAM32" : parm.Modulation_QAM32,
+ "QAM64" : parm.Modulation_QAM64,
+ "QAM128" : parm.Modulation_QAM128,
+ "QAM256" : parm.Modulation_QAM256 }
+ inv = { "INVERSION_OFF" : parm.Inversion_Off,
+ "INVERSION_ON" : parm.Inversion_On }
+ fec = { "FEC_AUTO" : parm.FEC_Auto,
+ "FEC_1_2" : parm.FEC_1_2,
+ "FEC_2_3" : parm.FEC_2_3,
+ "FEC_3_4" : parm.FEC_3_4,
+ "FEC_5_6": parm.FEC_5_6,
+ "FEC_7_8" : parm.FEC_7_8,
+ "FEC_8_9" : parm.FEC_8_9,
+ "FEC_NONE" : parm.FEC_None }
+ parm.frequency = int(data[1])
+ parm.symbol_rate = int(data[2])
+ parm.fec_inner = fec[data[3]]
+ parm.modulation = qam[data[4]]
+ parm.inversion = inv[data[5]]
+ self.__tlist.append(parm)
+ tmpstr = _("Try to find used Transponders in cable network.. please wait...")
+ tmpstr += "\n\n"
+ tmpstr += data[1]
+ tmpstr += " kHz "
+ tmpstr += data[0]
+ self.cable_search_session["text"].setText(tmpstr)
+
+ def startCableTransponderSearch(self, nim_idx):
+ if not self.tryGetRawFrontend(nim_idx):
+ self.session.nav.stopService()
+ if not self.tryGetRawFrontend(nim_idx):
+ if self.session.pipshown: # try to disable pip
+ self.session.pipshown = False
+ del self.session.pip
+ if not self.tryGetRawFrontend(nim_idx):
+ self.cableTransponderSearchFinished()
+ return
+ self.__tlist = [ ]
+ self.cable_search_container = eConsoleAppContainer()
+ self.cable_search_container.appClosed.append(self.cableTransponderSearchClosed)
+ self.cable_search_container.dataAvail.append(self.getCableTransponderData)
+ cableConfig = config.Nims[nim_idx].cable
+ cmd = "tda1002x --init --scan --verbose --wakeup --inv 2 --bus "
+ #FIXMEEEEEE hardcoded i2c devices for dm7025 and dm8000
+ if nim_idx < 2:
+ cmd += str(nim_idx)
+ else:
+ if nim_idx == 2:
+ cmd += "2" # first nim socket on DM8000 use /dev/i2c/2
+ else:
+ cmd += "4" # second nim socket on DM8000 use /dev/i2c/4
+ if cableConfig.scan_type.value == "bands":
+ cmd += " --scan-bands "
+ bands = 0
+ if cableConfig.scan_band_EU_VHF_I.value:
+ bands |= cable_bands["DVBC_BAND_EU_VHF_I"]
+ if cableConfig.scan_band_EU_MID.value:
+ bands |= cable_bands["DVBC_BAND_EU_MID"]
+ if cableConfig.scan_band_EU_VHF_III.value:
+ bands |= cable_bands["DVBC_BAND_EU_VHF_III"]
+ if cableConfig.scan_band_EU_UHF_IV.value:
+ bands |= cable_bands["DVBC_BAND_EU_UHF_IV"]
+ if cableConfig.scan_band_EU_UHF_V.value:
+ bands |= cable_bands["DVBC_BAND_EU_UHF_V"]
+ if cableConfig.scan_band_EU_SUPER.value:
+ bands |= cable_bands["DVBC_BAND_EU_SUPER"]
+ if cableConfig.scan_band_EU_HYPER.value:
+ bands |= cable_bands["DVBC_BAND_EU_HYPER"]
+ if cableConfig.scan_band_US_LOW.value:
+ bands |= cable_bands["DVBC_BAND_US_LO"]
+ if cableConfig.scan_band_US_MID.value:
+ bands |= cable_bands["DVBC_BAND_US_MID"]
+ if cableConfig.scan_band_US_HIGH.value:
+ bands |= cable_bands["DVBC_BAND_US_HI"]
+ if cableConfig.scan_band_US_SUPER.value:
+ bands |= cable_bands["DVBC_BAND_US_SUPER"]
+ if cableConfig.scan_band_US_HYPER.value:
+ bands |= cable_bands["DVBC_BAND_US_HYPER"]
+ cmd += str(bands)
+ else:
+ cmd += " --scan-stepsize "
+ cmd += str(cableConfig.scan_frequency_steps.value)
+ if cableConfig.scan_mod_qam16.value:
+ cmd += " --mod 16"
+ if cableConfig.scan_mod_qam32.value:
+ cmd += " --mod 32"
+ if cableConfig.scan_mod_qam64.value:
+ cmd += " --mod 64"
+ if cableConfig.scan_mod_qam128.value:
+ cmd += " --mod 128"
+ if cableConfig.scan_mod_qam256.value:
+ cmd += " --mod 256"
+ if cableConfig.scan_sr_6900.value:
+ cmd += " --sr 6900000"
+ if cableConfig.scan_sr_6875.value:
+ cmd += " --sr 6875000"
+ if cableConfig.scan_sr_ext1.value > 450:
+ cmd += " --sr "
+ cmd += str(cableConfig.scan_sr_ext1.value)
+ cmd += "000"
+ if cableConfig.scan_sr_ext2.value > 450:
+ cmd += " --sr "
+ cmd += str(cableConfig.scan_sr_ext2.value)
+ cmd += "000"
+ print "TDA1002x CMD is", cmd
+
+ self.cable_search_container.execute(cmd)
+ tmpstr = _("Try to find used transponders in cable network.. please wait...")
+ tmpstr += "\n\n..."
+ self.cable_search_session = self.session.openWithCallback(self.cableTransponderSearchSessionClosed, MessageBox, tmpstr, MessageBox.TYPE_INFO)
+
+class DefaultSatLists(DefaultWizard):
+ def __init__(self, session, silent = True, showSteps = False):
+ self.xmlfile = "defaultsatlists.xml"
+ DefaultWizard.__init__(self, session, silent, showSteps, neededTag = "services")
+ print "configuredSats:", nimmanager.getConfiguredSats()
+
+ def setDirectory(self):
+ self.directory = []
+ self.directory.append(resolveFilename(SCOPE_DEFAULTDIR))
+ import os
+ os.system("mount %s %s" % (resolveFilename(SCOPE_DEFAULTPARTITION), resolveFilename(SCOPE_DEFAULTPARTITIONMOUNTDIR)))
+ self.directory.append(resolveFilename(SCOPE_DEFAULTPARTITIONMOUNTDIR))
+
+ def statusCallback(self, status, progress):
+ print "statusCallback:", status, progress
+ from Components.DreamInfoHandler import DreamInfoHandler
+ if status == DreamInfoHandler.STATUS_DONE:
+ self["text"].setText(_("The installation of the default services lists is finished.") + "\n\n" + _("Please press OK to continue."))
+ self.markDone()
+ self.disableKeys = False
+
+class ScanSetup(ConfigListScreen, Screen, CableTransponderSearchSupport):
def __init__(self, session):
Screen.__init__(self, session)
+ self.finished_cb = None
self.updateSatList()
- self.createConfig()
+ self.service = session.nav.getCurrentService()
+ self.feinfo = None
+ frontendData = None
+ if self.service is not None:
+ self.feinfo = self.service.frontendInfo()
+ frontendData = self.feinfo and self.feinfo.getAll(True)
+
+ self.createConfig(frontendData)
+ del self.feinfo
+ del self.service
self["actions"] = NumberActionMap(["SetupActions"],
{
"ok": self.keyGo,
"cancel": self.keyCancel,
- "left": self.keyLeft,
- "right": self.keyRight,
- "1": self.keyNumberGlobal,
- "2": self.keyNumberGlobal,
- "3": self.keyNumberGlobal,
- "4": self.keyNumberGlobal,
- "5": self.keyNumberGlobal,
- "6": self.keyNumberGlobal,
- "7": self.keyNumberGlobal,
- "8": self.keyNumberGlobal,
- "9": self.keyNumberGlobal,
- "0": self.keyNumberGlobal
- }, -1)
+ }, -2)
+
+ self.statusTimer = eTimer()
+ self.statusTimer.callback.append(self.updateStatus)
+ #self.statusTimer.start(5000, True)
self.list = []
- self["config"] = ConfigList(self.list)
- self.createSetup()
+ ConfigListScreen.__init__(self, self.list)
+ if not self.scan_nims.value == "":
+ self.createSetup()
+ self["introduction"] = Label(_("Press OK to start the scan"))
+ else:
+ self["introduction"] = Label(_("Nothing to scan!\nPlease setup your tuner settings before you start a service scan."))
- self["introduction"] = Label(_("Press OK to start the scan"))
+ def runAsync(self, finished_cb):
+ self.finished_cb = finished_cb
+ self.keyGo()
def updateSatList(self):
self.satList = []
- for slot in nimmanager.nimslots:
- if (nimmanager.getNimType(slot.slotid) == nimmanager.nimType["DVB-S"]):
- self.satList.append(nimmanager.getSatListForNim(slot.slotid))
+ for slot in nimmanager.nim_slots:
+ if slot.isCompatible("DVB-S"):
+ self.satList.append(nimmanager.getSatListForNim(slot.slot))
else:
self.satList.append(None)
-
+
def createSetup(self):
self.list = []
self.multiscanlist = []
- print "ID: " + str(config.scan.nims.value)
+ index_to_scan = int(self.scan_nims.value)
+ print "ID: ", index_to_scan
- self.tunerEntry = getConfigListEntry(_("Tuner"), config.scan.nims)
+ self.tunerEntry = getConfigListEntry(_("Tuner"), self.scan_nims)
self.list.append(self.tunerEntry)
+ if self.scan_nims == [ ]:
+ return
+
self.typeOfScanEntry = None
- if (nimmanager.getNimType(config.scan.nims.value) == nimmanager.nimType["DVB-S"]):
- self.typeOfScanEntry = getConfigListEntry(_("Type of scan"), config.scan.type)
+ self.systemEntry = None
+ self.modulationEntry = None
+ nim = nimmanager.nim_slots[index_to_scan]
+ if nim.isCompatible("DVB-S"):
+ self.typeOfScanEntry = getConfigListEntry(_("Type of scan"), self.scan_type)
self.list.append(self.typeOfScanEntry)
- elif (nimmanager.getNimType(config.scan.nims.value) == nimmanager.nimType["DVB-C"]):
- self.typeOfScanEntry = getConfigListEntry(_("Type of scan"), config.scan.typecable)
+ elif nim.isCompatible("DVB-C"):
+ self.typeOfScanEntry = getConfigListEntry(_("Type of scan"), self.scan_typecable)
self.list.append(self.typeOfScanEntry)
- elif (nimmanager.getNimType(config.scan.nims.value) == nimmanager.nimType["DVB-T"]):
- self.typeOfScanEntry = getConfigListEntry(_("Type of scan"), config.scan.typeterrestrial)
+ elif nim.isCompatible("DVB-T"):
+ self.typeOfScanEntry = getConfigListEntry(_("Type of scan"), self.scan_typeterrestrial)
self.list.append(self.typeOfScanEntry)
-
- if (nimmanager.getNimType(config.scan.nims.value) == nimmanager.nimType["DVB-S"]):
-
- if currentConfigSelectionElement(config.scan.type) == "single_transponder":
- self.list.append(getConfigListEntry(_('Satellite'), config.scan.satselection[config.scan.nims.value]))
- self.list.append(getConfigListEntry(_('Frequency'), config.scan.sat.frequency))
- self.list.append(getConfigListEntry(_('Inversion'), config.scan.sat.inversion))
- self.list.append(getConfigListEntry(_('Symbol Rate'), config.scan.sat.symbolrate))
- self.list.append(getConfigListEntry(_("Polarity"), config.scan.sat.polarization))
- self.list.append(getConfigListEntry(_("FEC"), config.scan.sat.fec))
- elif currentConfigSelectionElement(config.scan.type) == "single_satellite":
+ self.scan_networkScan.value = False
+ if nim.isCompatible("DVB-S"):
+ if self.scan_type.value == "single_transponder":
self.updateSatList()
- print config.scan.satselection[config.scan.nims.value]
- self.list.append(getConfigListEntry(_("Satellite"), config.scan.satselection[config.scan.nims.value]))
- elif currentConfigSelectionElement(config.scan.type) == "multisat":
- # if (norotor)
+ if nim.isCompatible("DVB-S2"):
+ self.systemEntry = getConfigListEntry(_('System'), self.scan_sat.system)
+ self.list.append(self.systemEntry)
+ else:
+ # downgrade to dvb-s, in case a -s2 config was active
+ self.scan_sat.system.value = eDVBFrontendParametersSatellite.System_DVB_S
+ self.list.append(getConfigListEntry(_('Satellite'), self.scan_satselection[index_to_scan]))
+ self.list.append(getConfigListEntry(_('Frequency'), self.scan_sat.frequency))
+ self.list.append(getConfigListEntry(_('Inversion'), self.scan_sat.inversion))
+ self.list.append(getConfigListEntry(_('Symbol Rate'), self.scan_sat.symbolrate))
+ self.list.append(getConfigListEntry(_("Polarity"), self.scan_sat.polarization))
+ if self.scan_sat.system.value == eDVBFrontendParametersSatellite.System_DVB_S:
+ self.list.append(getConfigListEntry(_("FEC"), self.scan_sat.fec))
+ elif self.scan_sat.system.value == eDVBFrontendParametersSatellite.System_DVB_S2:
+ self.list.append(getConfigListEntry(_("FEC"), self.scan_sat.fec_s2))
+ self.modulationEntry = getConfigListEntry(_('Modulation'), self.scan_sat.modulation)
+ self.list.append(self.modulationEntry)
+ self.list.append(getConfigListEntry(_('Rolloff'), self.scan_sat.rolloff))
+ self.list.append(getConfigListEntry(_('Pilot'), self.scan_sat.pilot))
+ elif self.scan_type.value == "single_satellite":
+ self.updateSatList()
+ print self.scan_satselection[index_to_scan]
+ self.list.append(getConfigListEntry(_("Satellite"), self.scan_satselection[index_to_scan]))
+ self.scan_networkScan.value = True
+ elif self.scan_type.value.find("multisat") != -1:
tlist = []
- SatList = nimmanager.getSatListForNim(config.scan.nims.value)
-
+ SatList = nimmanager.getSatListForNim(index_to_scan)
for x in SatList:
- if self.Satexists(tlist, x[1]) == 0:
- tlist.append(x[1])
- sat = configElement_nonSave(x[1], configSelection, 0, (("enable", _("Enable")), ("disable", _("Disable"))))
- configEntry = getConfigListEntry(nimmanager.getSatDescription(x[1]), sat)
+ if self.Satexists(tlist, x[0]) == 0:
+ tlist.append(x[0])
+ sat = ConfigEnableDisable(default = self.scan_type.value.find("_yes") != -1 and True or False)
+ configEntry = getConfigListEntry(nimmanager.getSatDescription(x[0]), sat)
self.list.append(configEntry)
- self.multiscanlist.append(configEntry)
- # if (rotor):
- # for sat in nimmanager.satList:
- # self.list.append(getConfigListEntry(sat[0], config.scan.scansat[sat[1]]))
-
-
- if (nimmanager.getNimType(config.scan.nims.value) == nimmanager.nimType["DVB-C"]):
- if currentConfigSelectionElement(config.scan.typecable) == "single_transponder":
- self.list.append(getConfigListEntry(_("Frequency"), config.scan.cab.frequency))
- self.list.append(getConfigListEntry(_("Inversion"), config.scan.cab.inversion))
- self.list.append(getConfigListEntry(_("Symbol Rate"), config.scan.cab.symbolrate))
- self.list.append(getConfigListEntry(_("Modulation"), config.scan.cab.modulation))
- self.list.append(getConfigListEntry(_("FEC"), config.scan.cab.fec))
- elif currentConfigSelectionElement(config.scan.typecable) == "complete":
- pass
-
- if (nimmanager.getNimType(config.scan.nims.value) == nimmanager.nimType["DVB-T"]):
- if currentConfigSelectionElement(config.scan.typeterrestrial) == "single_transponder":
- self.list.append(getConfigListEntry(_("Frequency"), config.scan.ter.frequency))
- self.list.append(getConfigListEntry(_("Inversion"), config.scan.ter.inversion))
- self.list.append(getConfigListEntry(_("Bandwidth"), config.scan.ter.bandwidth))
- self.list.append(getConfigListEntry(_("Code rate high"), config.scan.ter.fechigh))
- self.list.append(getConfigListEntry(_("Code rate low"), config.scan.ter.feclow))
- self.list.append(getConfigListEntry(_("Modulation"), config.scan.ter.modulation))
- self.list.append(getConfigListEntry(_("Transmission mode"), config.scan.ter.transmission))
- self.list.append(getConfigListEntry(_("Guard interval mode"), config.scan.ter.guard))
- self.list.append(getConfigListEntry(_("Hierarchy mode"), config.scan.ter.hierarchy))
- elif currentConfigSelectionElement(config.scan.typeterrestrial) == "complete":
- pass
-
+ self.multiscanlist.append((x[0], sat))
+ self.scan_networkScan.value = True
+ elif nim.isCompatible("DVB-C"):
+ if self.scan_typecable.value == "single_transponder":
+ self.list.append(getConfigListEntry(_("Frequency"), self.scan_cab.frequency))
+ self.list.append(getConfigListEntry(_("Inversion"), self.scan_cab.inversion))
+ self.list.append(getConfigListEntry(_("Symbol Rate"), self.scan_cab.symbolrate))
+ self.list.append(getConfigListEntry(_("Modulation"), self.scan_cab.modulation))
+ self.list.append(getConfigListEntry(_("FEC"), self.scan_cab.fec))
+ elif nim.isCompatible("DVB-T"):
+ if self.scan_typeterrestrial.value == "single_transponder":
+ self.list.append(getConfigListEntry(_("Frequency"), self.scan_ter.frequency))
+ self.list.append(getConfigListEntry(_("Inversion"), self.scan_ter.inversion))
+ self.list.append(getConfigListEntry(_("Bandwidth"), self.scan_ter.bandwidth))
+ self.list.append(getConfigListEntry(_("Code rate high"), self.scan_ter.fechigh))
+ self.list.append(getConfigListEntry(_("Code rate low"), self.scan_ter.feclow))
+ self.list.append(getConfigListEntry(_("Modulation"), self.scan_ter.modulation))
+ self.list.append(getConfigListEntry(_("Transmission mode"), self.scan_ter.transmission))
+ self.list.append(getConfigListEntry(_("Guard interval mode"), self.scan_ter.guard))
+ self.list.append(getConfigListEntry(_("Hierarchy mode"), self.scan_ter.hierarchy))
+ self.list.append(getConfigListEntry(_("Network scan"), self.scan_networkScan))
+ self.list.append(getConfigListEntry(_("Clear before scan"), self.scan_clearallservices))
+ self.list.append(getConfigListEntry(_("Only Free scan"), self.scan_onlyfree))
self["config"].list = self.list
self["config"].l.setList(self.list)
return 0
def newConfig(self):
- print self["config"].getCurrent()
- if self["config"].getCurrent() == self.typeOfScanEntry:
- self.createSetup()
- if self["config"].getCurrent() == self.tunerEntry:
+ cur = self["config"].getCurrent()
+ print "cur is", cur
+ if cur == self.typeOfScanEntry or \
+ cur == self.tunerEntry or \
+ cur == self.systemEntry or \
+ (self.modulationEntry and self.systemEntry[1].value == eDVBFrontendParametersSatellite.System_DVB_S2 and cur == self.modulationEntry):
self.createSetup()
- def createConfig(self):
- config.scan = ConfigSubsection()
- config.scan.sat = ConfigSubsection()
- config.scan.cab = ConfigSubsection()
- config.scan.ter = ConfigSubsection()
-
- config.scan.type = configElement_nonSave("config.scan.type", configSelection, 0, (("single_transponder", _("Single transponder")), ("single_satellite", _("Single satellite")), ("multisat", _("Multisat"))))
- config.scan.typecable = configElement_nonSave("config.scan.typecable", configSelection, 0, (("single_transponder", _("Single transponder")), ("complete", _("Complete"))))
- config.scan.typeterrestrial = configElement_nonSave("config.scan.typeterrestrial", configSelection, 0, (("single_transponder", _("Single transponder")), ("complete", _("Complete"))))
-
- nimList = [ ]
- for nim in nimmanager.nimList():
- nimList.append(nim[0])
- #nimList.append("all")
- config.scan.nims = configElement_nonSave("config.scan.nims", configSelection, 0, nimList)
+ def createConfig(self, frontendData):
+ #("Type", frontendData["system"], TYPE_TEXT),
+ #("Modulation", frontendData["modulation"], TYPE_TEXT),
+ #("Orbital position", frontendData["orbital_position"], TYPE_VALUE_DEC),
+ #("Frequency", frontendData["frequency"], TYPE_VALUE_DEC),
+ #("Symbolrate", frontendData["symbol_rate"], TYPE_VALUE_DEC),
+ #("Polarization", frontendData["polarization"], TYPE_TEXT),
+ #("Inversion", frontendData["inversion"], TYPE_TEXT),
+ #("FEC inner", frontendData["fec_inner"], TYPE_TEXT),
+ #)
+ #elif frontendData["tuner_type"] == "DVB-C":
+ #return ( ("NIM", ['A', 'B', 'C', 'D'][frontendData["tuner_number"]], TYPE_TEXT),
+ #("Type", frontendData["tuner_type"], TYPE_TEXT),
+ #("Frequency", frontendData["frequency"], TYPE_VALUE_DEC),
+ #("Symbolrate", frontendData["symbol_rate"], TYPE_VALUE_DEC),
+ #("Modulation", frontendData["modulation"], TYPE_TEXT),
+ #("Inversion", frontendData["inversion"], TYPE_TEXT),
+ # ("FEC inner", frontendData["fec_inner"], TYPE_TEXT),
+ #)
+ #elif frontendData["tuner_type"] == "DVB-T":
+ #return ( ("NIM", ['A', 'B', 'C', 'D'][frontendData["tuner_number"]], TYPE_TEXT),
+ #("Type", frontendData["tuner_type"], TYPE_TEXT),
+ #("Frequency", frontendData["frequency"], TYPE_VALUE_DEC),
+ #("Inversion", frontendData["inversion"], TYPE_TEXT),
+ #("Bandwidth", frontendData["bandwidth"], TYPE_VALUE_DEC),
+ #("CodeRateLP", frontendData["code_rate_lp"], TYPE_TEXT),
+ #("CodeRateHP", frontendData["code_rate_hp"], TYPE_TEXT),
+ #("Constellation", frontendData["constellation"], TYPE_TEXT),
+ #("Transmission Mode", frontendData["transmission_mode"], TYPE_TEXT),
+ #("Guard Interval", frontendData["guard_interval"], TYPE_TEXT),
+ #("Hierarchy Inform.", frontendData["hierarchy_information"], TYPE_TEXT),
+ defaultSat = {
+ "orbpos": 192,
+ "system": eDVBFrontendParametersSatellite.System_DVB_S,
+ "frequency": 11836,
+ "inversion": eDVBFrontendParametersSatellite.Inversion_Unknown,
+ "symbolrate": 27500,
+ "polarization": eDVBFrontendParametersSatellite.Polarisation_Horizontal,
+ "fec": eDVBFrontendParametersSatellite.FEC_Auto,
+ "fec_s2": eDVBFrontendParametersSatellite.FEC_9_10,
+ "modulation": eDVBFrontendParametersSatellite.Modulation_QPSK }
+ defaultCab = {
+ "frequency": 466,
+ "inversion": eDVBFrontendParametersCable.Inversion_Unknown,
+ "modulation": eDVBFrontendParametersCable.Modulation_QAM64,
+ "fec": eDVBFrontendParametersCable.FEC_Auto,
+ "symbolrate": 6900 }
+ defaultTer = {
+ "frequency" : 466000,
+ "inversion" : eDVBFrontendParametersTerrestrial.Inversion_Unknown,
+ "bandwidth" : eDVBFrontendParametersTerrestrial.Bandwidth_7MHz,
+ "fechigh" : eDVBFrontendParametersTerrestrial.FEC_Auto,
+ "feclow" : eDVBFrontendParametersTerrestrial.FEC_Auto,
+ "modulation" : eDVBFrontendParametersTerrestrial.Modulation_Auto,
+ "transmission_mode" : eDVBFrontendParametersTerrestrial.TransmissionMode_Auto,
+ "guard_interval" : eDVBFrontendParametersTerrestrial.GuardInterval_Auto,
+ "hierarchy": eDVBFrontendParametersTerrestrial.Hierarchy_Auto }
+
+ if frontendData is not None:
+ ttype = frontendData.get("tuner_type", "UNKNOWN")
+ if ttype == "DVB-S":
+ defaultSat["system"] = frontendData.get("system", eDVBFrontendParametersSatellite.System_DVB_S)
+ defaultSat["frequency"] = frontendData.get("frequency", 0) / 1000
+ defaultSat["inversion"] = frontendData.get("inversion", eDVBFrontendParametersSatellite.Inversion_Unknown)
+ defaultSat["symbolrate"] = frontendData.get("symbol_rate", 0) / 1000
+ defaultSat["polarization"] = frontendData.get("polarization", eDVBFrontendParametersSatellite.Polarisation_Horizontal)
+ if defaultSat["system"] == eDVBFrontendParametersSatellite.System_DVB_S2:
+ defaultSat["fec_s2"] = frontendData.get("fec_inner", eDVBFrontendParametersSatellite.FEC_Auto)
+ defaultSat["rolloff"] = frontendData.get("rolloff", eDVBFrontendParametersSatellite.RollOff_alpha_0_35)
+ defaultSat["pilot"] = frontendData.get("pilot", eDVBFrontendParametersSatellite.Pilot_Unknown)
+ else:
+ defaultSat["fec"] = frontendData.get("fec_inner", eDVBFrontendParametersSatellite.FEC_Auto)
+ defaultSat["modulation"] = frontendData.get("modulation", eDVBFrontendParametersSatellite.Modulation_QPSK)
+ defaultSat["orbpos"] = frontendData.get("orbital_position", 0)
+ elif ttype == "DVB-C":
+ defaultCab["frequency"] = frontendData.get("frequency", 0) / 1000
+ defaultCab["symbolrate"] = frontendData.get("symbol_rate", 0) / 1000
+ defaultCab["inversion"] = frontendData.get("inversion", eDVBFrontendParametersCable.Inversion_Unknown)
+ defaultCab["fec"] = frontendData.get("fec_inner", eDVBFrontendParametersCable.FEC_Auto)
+ defaultCab["modulation"] = frontendData.get("modulation", eDVBFrontendParametersCable.Modulation_QAM16)
+ elif ttype == "DVB-T":
+ defaultTer["frequency"] = frontendData.get("frequency", 0)
+ defaultTer["inversion"] = frontendData.get("inversion", eDVBFrontendParametersTerrestrial.Inversion_Unknown)
+ defaultTer["bandwidth"] = frontendData.get("bandwidth", eDVBFrontendParametersTerrestrial.Bandwidth_7MHz)
+ defaultTer["fechigh"] = frontendData.get("code_rate_hp", eDVBFrontendParametersTerrestrial.FEC_Auto)
+ defaultTer["feclow"] = frontendData.get("code_rate_lp", eDVBFrontendParametersTerrestrial.FEC_Auto)
+ defaultTer["modulation"] = frontendData.get("constellation", eDVBFrontendParametersTerrestrial.Modulation_Auto)
+ defaultTer["transmission_mode"] = frontendData.get("transmission_mode", eDVBFrontendParametersTerrestrial.TransmissionMode_Auto)
+ defaultTer["guard_interval"] = frontendData.get("guard_interval", eDVBFrontendParametersTerrestrial.GuardInterval_Auto)
+ defaultTer["hierarchy"] = frontendData.get("hierarchy_information", eDVBFrontendParametersTerrestrial.Hierarchy_Auto)
+
+ self.scan_sat = ConfigSubsection()
+ self.scan_cab = ConfigSubsection()
+ self.scan_ter = ConfigSubsection()
+
+ self.scan_type = ConfigSelection(default = "single_transponder", choices = [("single_transponder", _("Single transponder")), ("single_satellite", _("Single satellite")), ("multisat", _("Multisat")), ("multisat_yes", _("Multisat"))])
+ self.scan_typecable = ConfigSelection(default = "single_transponder", choices = [("single_transponder", _("Single transponder")), ("complete", _("Complete"))])
+ self.scan_typeterrestrial = ConfigSelection(default = "single_transponder", choices = [("single_transponder", _("Single transponder")), ("complete", _("Complete"))])
+ self.scan_clearallservices = ConfigSelection(default = "no", choices = [("no", _("no")), ("yes", _("yes")), ("yes_hold_feeds", _("yes (keep feeds)"))])
+ self.scan_onlyfree = ConfigYesNo(default = False)
+ self.scan_networkScan = ConfigYesNo(default = False)
+
+ nim_list = []
+ # collect all nims which are *not* set to "nothing"
+ for n in nimmanager.nim_slots:
+ if n.config_mode == "nothing":
+ continue
+ if n.config_mode in ("loopthrough", "satposdepends"):
+ root_id = nimmanager.sec.getRoot(n.slot_id, int(n.config.connectedTo.value))
+ if n.type == nimmanager.nim_slots[root_id].type: # check if connected from a DVB-S to DVB-S2 Nim or vice versa
+ continue
+ nim_list.append((str(n.slot), n.friendly_full_description))
+
+ self.scan_nims = ConfigSelection(choices = nim_list)
+
+ # status
+ self.scan_snr = ConfigSlider()
+ self.scan_snr.enabled = False
+ self.scan_agc = ConfigSlider()
+ self.scan_agc.enabled = False
+ self.scan_ber = ConfigSlider()
+ self.scan_ber.enabled = False
# sat
- config.scan.sat.frequency = configElement_nonSave("config.scan.sat.frequency", configSequence, [11836], configsequencearg.get("INTEGER", (1, 99999)))
- config.scan.sat.inversion = configElement_nonSave("config.scan.sat.inversion", configSelection, 2, (("off", _("off")), ("on", _("on")), _("Auto")))
- config.scan.sat.symbolrate = configElement_nonSave("config.scan.sat.symbolrate", configSequence, [27500], configsequencearg.get("INTEGER", (1, 99999)))
- config.scan.sat.polarization = configElement_nonSave("config.scan.sat.polarization", configSelection, 0, (("horizontal", _("horizontal")), ("vertical", _("vertical")), ("circular_left", _("circular left")), ("circular_right", _("circular right"))))
- config.scan.sat.fec = configElement_nonSave("config.scan.sat.fec", configSelection, 7, (("auto", _("Auto")), ("1_2", "1/2"), ("2_3", "2/3"), ("3_4", "3/4"), ("5_6", "5/6"), ("7_8", "7/8"), ("none", _("None"))))
+ self.scan_sat.system = ConfigSelection(default = defaultSat["system"], choices = [
+ (eDVBFrontendParametersSatellite.System_DVB_S, _("DVB-S")),
+ (eDVBFrontendParametersSatellite.System_DVB_S2, _("DVB-S2"))])
+ self.scan_sat.frequency = ConfigInteger(default = defaultSat["frequency"], limits = (1, 99999))
+ self.scan_sat.inversion = ConfigSelection(default = defaultSat["inversion"], choices = [
+ (eDVBFrontendParametersSatellite.Inversion_Off, _("off")),
+ (eDVBFrontendParametersSatellite.Inversion_On, _("on")),
+ (eDVBFrontendParametersSatellite.Inversion_Unknown, _("Auto"))])
+ self.scan_sat.symbolrate = ConfigInteger(default = defaultSat["symbolrate"], limits = (1, 99999))
+ self.scan_sat.polarization = ConfigSelection(default = defaultSat["polarization"], choices = [
+ (eDVBFrontendParametersSatellite.Polarisation_Horizontal, _("horizontal")),
+ (eDVBFrontendParametersSatellite.Polarisation_Vertical, _("vertical")),
+ (eDVBFrontendParametersSatellite.Polarisation_CircularLeft, _("circular left")),
+ (eDVBFrontendParametersSatellite.Polarisation_CircularRight, _("circular right"))])
+ self.scan_sat.fec = ConfigSelection(default = defaultSat["fec"], choices = [
+ (eDVBFrontendParametersSatellite.FEC_Auto, _("Auto")),
+ (eDVBFrontendParametersSatellite.FEC_1_2, "1/2"),
+ (eDVBFrontendParametersSatellite.FEC_2_3, "2/3"),
+ (eDVBFrontendParametersSatellite.FEC_3_4, "3/4"),
+ (eDVBFrontendParametersSatellite.FEC_5_6, "5/6"),
+ (eDVBFrontendParametersSatellite.FEC_7_8, "7/8"),
+ (eDVBFrontendParametersSatellite.FEC_None, _("None"))])
+ self.scan_sat.fec_s2 = ConfigSelection(default = defaultSat["fec_s2"], choices = [
+ (eDVBFrontendParametersSatellite.FEC_1_2, "1/2"),
+ (eDVBFrontendParametersSatellite.FEC_2_3, "2/3"),
+ (eDVBFrontendParametersSatellite.FEC_3_4, "3/4"),
+ (eDVBFrontendParametersSatellite.FEC_3_5, "3/5"),
+ (eDVBFrontendParametersSatellite.FEC_4_5, "4/5"),
+ (eDVBFrontendParametersSatellite.FEC_5_6, "5/6"),
+ (eDVBFrontendParametersSatellite.FEC_7_8, "7/8"),
+ (eDVBFrontendParametersSatellite.FEC_8_9, "8/9"),
+ (eDVBFrontendParametersSatellite.FEC_9_10, "9/10")])
+ self.scan_sat.modulation = ConfigSelection(default = defaultSat["modulation"], choices = [
+ (eDVBFrontendParametersSatellite.Modulation_QPSK, "QPSK"),
+ (eDVBFrontendParametersSatellite.Modulation_8PSK, "8PSK")])
+ self.scan_sat.rolloff = ConfigSelection(default = defaultSat.get("rolloff", eDVBFrontendParametersSatellite.RollOff_alpha_0_35), choices = [
+ (eDVBFrontendParametersSatellite.RollOff_alpha_0_35, "0.35"),
+ (eDVBFrontendParametersSatellite.RollOff_alpha_0_25, "0.25"),
+ (eDVBFrontendParametersSatellite.RollOff_alpha_0_20, "0.20")])
+ self.scan_sat.pilot = ConfigSelection(default = defaultSat.get("pilot", eDVBFrontendParametersSatellite.Pilot_Unknown), choices = [
+ (eDVBFrontendParametersSatellite.Pilot_Off, _("off")),
+ (eDVBFrontendParametersSatellite.Pilot_On, _("on")),
+ (eDVBFrontendParametersSatellite.Pilot_Unknown, _("Auto"))])
# cable
- config.scan.cab.frequency = configElement_nonSave("config.scan.cab.frequency", configSequence, [466], configsequencearg.get("INTEGER", (50, 9999)))
- config.scan.cab.inversion = configElement_nonSave("config.scan.cab.inversion", configSelection, 2, (("off", _("off")), ("on", _("on")), ("auto", _("Auto"))))
- config.scan.cab.modulation = configElement_nonSave("config.scan.cab.modulation", configSelection, 2, (("16qam", "16-QAM"), ("32qam", "32-QAM"), ("64qam", "64-QAM"), ("128qam", "128-QAM"), ("256qam", "256-QAM"), ("auto", _("Auto"))))
- config.scan.cab.fec = configElement_nonSave("config.scan.cab.fec", configSelection, 9, (("none", _("None")), ("1_2", "1/2"), ("2_3", "2/3"), ("3_4", "3/4"), ("5_6", "5/6"), ("7_8", "7/8"), ("auto", _("Auto"))))
- config.scan.cab.symbolrate = configElement_nonSave("config.scan.cab.symbolrate", configSequence, [6900], configsequencearg.get("INTEGER", (1, 9999)))
+ self.scan_cab.frequency = ConfigInteger(default = defaultCab["frequency"], limits = (50, 999))
+ self.scan_cab.inversion = ConfigSelection(default = defaultCab["inversion"], choices = [
+ (eDVBFrontendParametersCable.Inversion_Off, _("off")),
+ (eDVBFrontendParametersCable.Inversion_On, _("on")),
+ (eDVBFrontendParametersCable.Inversion_Unknown, _("Auto"))])
+ self.scan_cab.modulation = ConfigSelection(default = defaultCab["modulation"], choices = [
+ (eDVBFrontendParametersCable.Modulation_QAM16, "16-QAM"),
+ (eDVBFrontendParametersCable.Modulation_QAM32, "32-QAM"),
+ (eDVBFrontendParametersCable.Modulation_QAM64, "64-QAM"),
+ (eDVBFrontendParametersCable.Modulation_QAM128, "128-QAM"),
+ (eDVBFrontendParametersCable.Modulation_QAM256, "256-QAM")])
+ self.scan_cab.fec = ConfigSelection(default = defaultCab["fec"], choices = [
+ (eDVBFrontendParametersCable.FEC_Auto, _("Auto")),
+ (eDVBFrontendParametersCable.FEC_1_2, "1/2"),
+ (eDVBFrontendParametersCable.FEC_2_3, "2/3"),
+ (eDVBFrontendParametersCable.FEC_3_4, "3/4"),
+ (eDVBFrontendParametersCable.FEC_5_6, "5/6"),
+ (eDVBFrontendParametersCable.FEC_7_8, "7/8"),
+ (eDVBFrontendParametersCable.FEC_8_9, "8/9"),
+ (eDVBFrontendParametersCable.FEC_None, _("None"))])
+ self.scan_cab.symbolrate = ConfigInteger(default = defaultCab["symbolrate"], limits = (1, 99999))
# terrestial
- config.scan.ter.frequency = configElement_nonSave("config.scan.ter.frequency", configSequence, [466], configsequencearg.get("INTEGER", (100, 900)))
- config.scan.ter.inversion = configElement_nonSave("config.scan.ter.inversion", configSelection, 2, (("off", _("off")), ("on", _("on")), ("auto", _("Auto"))))
- config.scan.ter.bandwidth = configElement_nonSave("config.scan.ter.bandwidth", configSelection, 3, (("8MHz", "8MHz"), ("7MHz", "7MHz"), ("6MHz", "6MHz"), ("auto", _("Auto"))))
- config.scan.ter.fechigh = configElement_nonSave("config.scan.ter.fechigh", configSelection, 6, (("none", _("None")), "1/2", "2/3", "3/4", "5/6", "7/8", _("Auto")))
- config.scan.ter.feclow = configElement_nonSave("config.scan.ter.feclow", configSelection, 6, (_("None"), ("1_2", "1/2"), ("2_3", "2/3"), ("3_4", "3/4"), ("5_6", "5/6"), ("7_8", "7/8"), ("auto", _("Auto"))))
- config.scan.ter.modulation = configElement_nonSave("config.scan.ter.modulation", configSelection, 2, (("qpsk", "QPSK"), ("qam16", "QAM16"), ("auto", _("Auto"))))
- config.scan.ter.transmission = configElement_nonSave("config.scan.ter.transmission", configSelection, 2, (("2k", "2K"), ("8k", "8K"), ("auto", _("Auto"))))
- config.scan.ter.guard = configElement_nonSave("config.scan.ter.guard", configSelection, 4, (("1_32", "1/32"), ("1_16", "1/16"), ("1_8", "1/8"), ("1_4", "1/4"), ("auto", _("Auto"))))
- config.scan.ter.hierarchy = configElement_nonSave("config.scan.ter.hierarchy", configSelection, 4, (("none", _("None")), ("1", "1"), ("2", "2"), ("4", "4"), ("auto", _("Auto"))))
-
- config.scan.scansat = {}
+ self.scan_ter.frequency = ConfigInteger(default = 466000, limits = (50000, 999000))
+ self.scan_ter.inversion = ConfigSelection(default = defaultTer["inversion"], choices = [
+ (eDVBFrontendParametersTerrestrial.Inversion_Off, _("off")),
+ (eDVBFrontendParametersTerrestrial.Inversion_On, _("on")),
+ (eDVBFrontendParametersTerrestrial.Inversion_Unknown, _("Auto"))])
+ # WORKAROUND: we can't use BW-auto
+ self.scan_ter.bandwidth = ConfigSelection(default = defaultTer["bandwidth"], choices = [
+ (eDVBFrontendParametersTerrestrial.Bandwidth_8MHz, "8MHz"),
+ (eDVBFrontendParametersTerrestrial.Bandwidth_7MHz, "7MHz"),
+ (eDVBFrontendParametersTerrestrial.Bandwidth_6MHz, "6MHz")])
+ #, (eDVBFrontendParametersTerrestrial.Bandwidth_Auto, _("Auto"))))
+ self.scan_ter.fechigh = ConfigSelection(default = defaultTer["fechigh"], choices = [
+ (eDVBFrontendParametersTerrestrial.FEC_1_2, "1/2"),
+ (eDVBFrontendParametersTerrestrial.FEC_2_3, "2/3"),
+ (eDVBFrontendParametersTerrestrial.FEC_3_4, "3/4"),
+ (eDVBFrontendParametersTerrestrial.FEC_5_6, "5/6"),
+ (eDVBFrontendParametersTerrestrial.FEC_7_8, "7/8"),
+ (eDVBFrontendParametersTerrestrial.FEC_Auto, _("Auto"))])
+ self.scan_ter.feclow = ConfigSelection(default = defaultTer["feclow"], choices = [
+ (eDVBFrontendParametersTerrestrial.FEC_1_2, "1/2"),
+ (eDVBFrontendParametersTerrestrial.FEC_2_3, "2/3"),
+ (eDVBFrontendParametersTerrestrial.FEC_3_4, "3/4"),
+ (eDVBFrontendParametersTerrestrial.FEC_5_6, "5/6"),
+ (eDVBFrontendParametersTerrestrial.FEC_7_8, "7/8"),
+ (eDVBFrontendParametersTerrestrial.FEC_Auto, _("Auto"))])
+ self.scan_ter.modulation = ConfigSelection(default = defaultTer["modulation"], choices = [
+ (eDVBFrontendParametersTerrestrial.Modulation_QPSK, "QPSK"),
+ (eDVBFrontendParametersTerrestrial.Modulation_QAM16, "QAM16"),
+ (eDVBFrontendParametersTerrestrial.Modulation_QAM64, "QAM64"),
+ (eDVBFrontendParametersTerrestrial.Modulation_Auto, _("Auto"))])
+ self.scan_ter.transmission = ConfigSelection(default = defaultTer["transmission_mode"], choices = [
+ (eDVBFrontendParametersTerrestrial.TransmissionMode_2k, "2K"),
+ (eDVBFrontendParametersTerrestrial.TransmissionMode_8k, "8K"),
+ (eDVBFrontendParametersTerrestrial.TransmissionMode_Auto, _("Auto"))])
+ self.scan_ter.guard = ConfigSelection(default = defaultTer["guard_interval"], choices = [
+ (eDVBFrontendParametersTerrestrial.GuardInterval_1_32, "1/32"),
+ (eDVBFrontendParametersTerrestrial.GuardInterval_1_16, "1/16"),
+ (eDVBFrontendParametersTerrestrial.GuardInterval_1_8, "1/8"),
+ (eDVBFrontendParametersTerrestrial.GuardInterval_1_4, "1/4"),
+ (eDVBFrontendParametersTerrestrial.GuardInterval_Auto, _("Auto"))])
+ self.scan_ter.hierarchy = ConfigSelection(default = defaultTer["hierarchy"], choices = [
+ (eDVBFrontendParametersTerrestrial.Hierarchy_None, _("None")),
+ (eDVBFrontendParametersTerrestrial.Hierarchy_1, "1"),
+ (eDVBFrontendParametersTerrestrial.Hierarchy_2, "2"),
+ (eDVBFrontendParametersTerrestrial.Hierarchy_4, "4"),
+ (eDVBFrontendParametersTerrestrial.Hierarchy_Auto, _("Auto"))])
+
+ self.scan_scansat = {}
for sat in nimmanager.satList:
#print sat[1]
- config.scan.scansat[sat[1]] = configElement_nonSave("config.scan.scansat[" + str(sat[1]) + "]", configSelection, 0, (("yes", _("yes")), ("no", _("no"))))
-
- config.scan.satselection = []
- slotid = 0
- for slot in nimmanager.nimslots:
- if (nimmanager.getNimType(slot.slotid) == nimmanager.nimType["DVB-S"]):
- print str(slot.slotid) + " : " + str(self.satList)
- config.scan.satselection.append(configElement_nonSave("config.scan.satselection[" + str(slot.slotid) + "]", configSatlist, 0, self.satList[slot.slotid]))
+ self.scan_scansat[sat[0]] = ConfigYesNo(default = False)
+
+ self.scan_satselection = []
+ for slot in nimmanager.nim_slots:
+ if slot.isCompatible("DVB-S"):
+ self.scan_satselection.append(getConfigSatlist(defaultSat["orbpos"], self.satList[slot.slot]))
else:
- config.scan.satselection.append(None)
+ self.scan_satselection.append(None)
+
+ return True
+
def keyLeft(self):
- self["config"].handleKey(config.key["prevElement"])
+ ConfigListScreen.keyLeft(self)
self.newConfig()
def keyRight(self):
- self["config"].handleKey(config.key["nextElement"])
+ ConfigListScreen.keyRight(self)
self.newConfig()
- def keyNumberGlobal(self, number):
- print "You pressed number " + str(number)
- if (self["config"].getCurrent()[1].parent.enabled == True):
- self["config"].handleKey(config.key[str(number)])
+ def updateStatus(self):
+ print "updatestatus"
- def addSatTransponder(self, tlist, frequency, symbol_rate, polarisation, fec, inversion, orbital_position):
- print "Add Sat: frequ: " + str(frequency) + " symbol: " + str(symbol_rate) + " pol: " + str(polarisation) + " fec: " + str(fec) + " inversion: " + str(inversion)
+ def addSatTransponder(self, tlist, frequency, symbol_rate, polarisation, fec, inversion, orbital_position, system, modulation, rolloff, pilot):
+ print "Add Sat: frequ: " + str(frequency) + " symbol: " + str(symbol_rate) + " pol: " + str(polarisation) + " fec: " + str(fec) + " inversion: " + str(inversion) + " modulation: " + str(modulation) + " system: " + str(system) + " rolloff" + str(rolloff) + " pilot" + str(pilot)
print "orbpos: " + str(orbital_position)
parm = eDVBFrontendParametersSatellite()
+ parm.modulation = modulation
+ parm.system = system
parm.frequency = frequency * 1000
parm.symbol_rate = symbol_rate * 1000
- parm.polarisation = polarisation # eDVBFrontendParametersSatellite.Polarisation.Verti
- parm.fec = fec # eDVBFrontendParametersSatellite.FEC.f3_4;
- #parm.fec = 6 # AUTO
- parm.inversion = inversion #eDVBFrontendParametersSatellite.Inversion.Off;
- #parm.inversion = 2 #AUTO
- parm.orbital_position = int(orbital_position)
+ parm.polarisation = polarisation
+ parm.fec = fec
+ parm.inversion = inversion
+ parm.orbital_position = orbital_position
+ parm.rolloff = rolloff
+ parm.pilot = pilot
tlist.append(parm)
- # FIXME use correct parameters
def addCabTransponder(self, tlist, frequency, symbol_rate, modulation, fec, inversion):
- print "Add Sat: frequ: " + str(frequency) + " symbol: " + str(symbol_rate) + " pol: " + str(modulation) + " fec: " + str(fec) + " inversion: " + str(inversion)
+ print "Add Cab: frequ: " + str(frequency) + " symbol: " + str(symbol_rate) + " pol: " + str(modulation) + " fec: " + str(fec) + " inversion: " + str(inversion)
parm = eDVBFrontendParametersCable()
parm.frequency = frequency * 1000
parm.symbol_rate = symbol_rate * 1000
- parm.modulation = modulation # eDVBFrontendParametersSatellite.Polarisation.Verti
- parm.fec = fec # eDVBFrontendParametersSatellite.FEC.f3_4;
- #parm.fec = 6 # AUTO
- parm.inversion = inversion #eDVBFrontendParametersSatellite.Inversion.Off;
- #parm.inversion = 2 #AUTO
+ parm.modulation = modulation
+ parm.fec = fec
+ parm.inversion = inversion
tlist.append(parm)
- # FIXME use correct parameters
- def addTerTransponder(self, tlist, frequency):
- parm = eDVBFrontendParametersTerrestrial()
-
- parm.frequency = frequency * 1000000
- parm.inversion = 2 # eDVBFrontendParametersTerrestrial.Inversion.Unknown;
- parm.bandwidth = 0 #eDVBFrontendParametersTerrestrial.Bandwidth.Bw8MHz;
- parm.code_rate_HP = parm.code_rate_LP = 6 #eDVBFrontendParametersTerrestrial.FEC.fAuto;
- parm.modulation = 1 #eDVBFrontendParametersTerrestrial.Modulation.QAM16;
- parm.transmission_mode = 1 # eDVBFrontendParametersTerrestrial.TransmissionMode.TM8k;
- parm.guard_interval = 0 # eDVBFrontendParametersTerrestrial.GuardInterval.GI_1_32;
- parm.hierarchy = 0 #eDVBFrontendParametersTerrestrial.Hierarchy.HNone;
- tlist.append(parm)
+ def addTerTransponder(self, tlist, *args, **kwargs):
+ tlist.append(buildTerTransponder(*args, **kwargs))
def keyGo(self):
+ if self.scan_nims.value == "":
+ return
tlist = []
- flags = 0
- if currentConfigSelectionElement(config.scan.type) == "single_transponder":
- if (nimmanager.getNimType(config.scan.nims.value) == nimmanager.nimType["DVB-S"]):
- self.addSatTransponder(tlist, config.scan.sat.frequency.value[0],
- config.scan.sat.symbolrate.value[0],
- config.scan.sat.polarization.value,
- config.scan.sat.fec.value,
- config.scan.sat.inversion.value,
- self.satList[config.scan.nims.value][config.scan.satselection[config.scan.nims.value].value][1])
- elif (nimmanager.getNimType(config.scan.nims.value) == nimmanager.nimType["DVB-C"]):
- self.addCabTransponder(tlist, config.scan.cab.frequency.value[0],
- config.scan.cab.symbolrate.value[0],
- config.scan.cab.modulation.value,
- config.scan.cab.fec.value,
- config.scan.cab.inversion.value)
- elif (nimmanager.getNimType(config.scan.nims.value) == nimmanager.nimType["DVB-T"]):
- self.addTerTransponder(tlist,
- config.scan.ter.frequency.value[0])
-
- elif currentConfigSelectionElement(config.scan.type) == single_satellite:
- getInitialTransponderList(tlist, int(self.satList[config.scan.nims.value][config.scan.satselection[config.scan.nims.value].value][1]))
- flags |= eComponentScan.scanNetworkSearch
-
- elif currentConfigSelectionElement(config.scan.type) == "multisat":
- SatList = nimmanager.getSatListForNim(config.scan.nims.value)
-
- for x in self.multiscanlist:
- if x[1].parent.value == 0:
- print " " + str(x[1].parent.configPath)
- getInitialTransponderList(tlist, x[1].parent.configPath)
- flags |= eComponentScan.scanNetworkSearch
+ flags = None
+ startScan = True
+ removeAll = True
+ index_to_scan = int(self.scan_nims.value)
+
+ if self.scan_nims == [ ]:
+ self.session.open(MessageBox, _("No tuner is enabled!\nPlease setup your tuner settings before you start a service scan."), MessageBox.TYPE_ERROR)
+ return
+
+ nim = nimmanager.nim_slots[index_to_scan]
+ print "nim", nim.slot
+ if nim.isCompatible("DVB-S"):
+ print "is compatible with DVB-S"
+ if self.scan_type.value == "single_transponder":
+ # these lists are generated for each tuner, so this has work.
+ assert len(self.satList) > index_to_scan
+ assert len(self.scan_satselection) > index_to_scan
+
+ nimsats = self.satList[index_to_scan]
+ selsatidx = self.scan_satselection[index_to_scan].index
+
+ # however, the satList itself could be empty. in that case, "index" is 0 (for "None").
+ if len(nimsats):
+ orbpos = nimsats[selsatidx][0]
+ if self.scan_sat.system.value == eDVBFrontendParametersSatellite.System_DVB_S:
+ fec = self.scan_sat.fec.value
+ else:
+ fec = self.scan_sat.fec_s2.value
+ print "add sat transponder"
+ self.addSatTransponder(tlist, self.scan_sat.frequency.value,
+ self.scan_sat.symbolrate.value,
+ self.scan_sat.polarization.value,
+ fec,
+ self.scan_sat.inversion.value,
+ orbpos,
+ self.scan_sat.system.value,
+ self.scan_sat.modulation.value,
+ self.scan_sat.rolloff.value,
+ self.scan_sat.pilot.value)
+ removeAll = False
+ elif self.scan_type.value == "single_satellite":
+ sat = self.satList[index_to_scan][self.scan_satselection[index_to_scan].index]
+ getInitialTransponderList(tlist, sat[0])
+ elif self.scan_type.value.find("multisat") != -1:
+ SatList = nimmanager.getSatListForNim(index_to_scan)
+ for x in self.multiscanlist:
+ if x[1].value:
+ print " " + str(x[0])
+ getInitialTransponderList(tlist, x[0])
+
+ elif nim.isCompatible("DVB-C"):
+ if self.scan_typecable.value == "single_transponder":
+ self.addCabTransponder(tlist, self.scan_cab.frequency.value,
+ self.scan_cab.symbolrate.value,
+ self.scan_cab.modulation.value,
+ self.scan_cab.fec.value,
+ self.scan_cab.inversion.value)
+ removeAll = False
+ elif self.scan_typecable.value == "complete":
+ if config.Nims[index_to_scan].cable.scan_type.value == "provider":
+ getInitialCableTransponderList(tlist, index_to_scan)
+ else:
+ startScan = False
+
+ elif nim.isCompatible("DVB-T"):
+ if self.scan_typeterrestrial.value == "single_transponder":
+ self.addTerTransponder(tlist,
+ self.scan_ter.frequency.value * 1000,
+ inversion = self.scan_ter.inversion.value,
+ bandwidth = self.scan_ter.bandwidth.value,
+ fechigh = self.scan_ter.fechigh.value,
+ feclow = self.scan_ter.feclow.value,
+ modulation = self.scan_ter.modulation.value,
+ transmission = self.scan_ter.transmission.value,
+ guard = self.scan_ter.guard.value,
+ hierarchy = self.scan_ter.hierarchy.value)
+ removeAll = False
+ elif self.scan_typeterrestrial.value == "complete":
+ getInitialTerrestrialTransponderList(tlist, nimmanager.getTerrestrialDescription(index_to_scan))
+
+ flags = self.scan_networkScan.value and eComponentScan.scanNetworkSearch or 0
+
+ tmp = self.scan_clearallservices.value
+ if tmp == "yes":
+ flags |= eComponentScan.scanRemoveServices
+ elif tmp == "yes_hold_feeds":
+ flags |= eComponentScan.scanRemoveServices
+ flags |= eComponentScan.scanDontRemoveFeeds
+
+ if tmp != "no" and not removeAll:
+ flags |= eComponentScan.scanDontRemoveUnscanned
+
+ if self.scan_onlyfree.value:
+ flags |= eComponentScan.scanOnlyFree
for x in self["config"].list:
x[1].save()
- feid = config.scan.nims.value
- # flags |= eComponentScan.scanSearchBAT
- self.session.openWithCallback(self.doNothing, ServiceScan, tlist, feid, flags)
-
- #self.close()
- def doNothing(self):
- pass
+ if startScan:
+ self.startScan(tlist, flags, index_to_scan)
+ else:
+ self.flags = flags
+ self.feid = index_to_scan
+ self.tlist = []
+ self.startCableTransponderSearch(self.feid)
+
+ def setCableTransponderSearchResult(self, tlist):
+ self.tlist = tlist
+
+ def cableTransponderSearchFinished(self):
+ self.startScan(self.tlist, self.flags, self.feid)
+
+ def startScan(self, tlist, flags, feid):
+ if len(tlist):
+ # flags |= eComponentScan.scanSearchBAT
+ if self.finished_cb:
+ self.session.openWithCallback(self.finished_cb, ServiceScan, [{"transponders": tlist, "feid": feid, "flags": flags}])
+ else:
+ self.session.open(ServiceScan, [{"transponders": tlist, "feid": feid, "flags": flags}])
+ else:
+ if self.finished_cb:
+ self.session.openWithCallback(self.finished_cb, MessageBox, _("Nothing to scan!\nPlease setup your tuner settings before you start a service scan."), MessageBox.TYPE_ERROR)
+ else:
+ self.session.open(MessageBox, _("Nothing to scan!\nPlease setup your tuner settings before you start a service scan."), MessageBox.TYPE_ERROR)
def keyCancel(self):
for x in self["config"].list:
x[1].cancel()
self.close()
-class ScanSimple(Screen):
-
- def run(self):
- print "start scan for sats:"
- tlist = [ ]
- for x in self.list:
- if x[1].parent.value == 0:
- print " " + str(x[1].parent.configPath)
- getInitialTransponderList(tlist, x[1].parent.configPath)
-
- feid = 0 # FIXME
- self.session.openWithCallback(self.doNothing, ServiceScan, tlist, feid, eComponentScan.scanNetworkSearch)
-
-
- def keyGo(self):
- print "start scan for sats:"
- tlist = [ ]
- for x in self.list:
- if x[1].parent.value == 0:
- print " " + str(x[1].parent.configPath)
- getInitialTransponderList(tlist, x[1].parent.configPath)
-
- feid = 0 # FIXME
- self.session.openWithCallback(self.doNothing, ServiceScan, tlist, feid, eComponentScan.scanNetworkSearch)
-
- def doNothing(self):
- pass
-
- def keyCancel(self):
- self.close()
-
- def keyLeft(self):
- self["config"].handleKey(config.key["prevElement"])
-
- def keyRight(self):
- self["config"].handleKey(config.key["nextElement"])
-
- def Satexists(self, tlist, pos):
- for x in tlist:
- if x == pos:
- return 1
- return 0
+class ScanSimple(ConfigListScreen, Screen, CableTransponderSearchSupport):
+ def getNetworksForNim(self, nim):
+ if nim.isCompatible("DVB-S"):
+ networks = nimmanager.getSatListForNim(nim.slot)
+ elif not nim.empty:
+ networks = [ nim.type ] # "DVB-C" or "DVB-T". TODO: seperate networks for different C/T tuners, if we want to support that.
+ else:
+ # empty tuners provide no networks.
+ networks = [ ]
+ return networks
def __init__(self, session):
Screen.__init__(self, session)
{
"ok": self.keyGo,
"cancel": self.keyCancel,
- "left": self.keyLeft,
- "right": self.keyRight,
- }, -1)
+ }, -2)
self.list = []
tlist = []
+ known_networks = [ ]
+ nims_to_scan = [ ]
+ self.finished_cb = None
+
+ for nim in nimmanager.nim_slots:
+ # collect networks provided by this tuner
+
+ need_scan = False
+ networks = self.getNetworksForNim(nim)
+
+ print "nim %d provides" % nim.slot, networks
+ print "known:", known_networks
+
+ # we only need to scan on the first tuner which provides a network.
+ # this gives the first tuner for each network priority for scanning.
+ for x in networks:
+ if x not in known_networks:
+ need_scan = True
+ print x, "not in ", known_networks
+ known_networks.append(x)
+
+ # don't offer to scan nims if nothing is connected
+ if not nimmanager.somethingConnected(nim.slot):
+ need_scan = False
+
+ if need_scan:
+ nims_to_scan.append(nim)
+
+ # we save the config elements to use them on keyGo
+ self.nim_enable = [ ]
+
+ if len(nims_to_scan):
+ self.scan_clearallservices = ConfigSelection(default = "yes", choices = [("no", _("no")), ("yes", _("yes")), ("yes_hold_feeds", _("yes (keep feeds)"))])
+ self.list.append(getConfigListEntry(_("Clear before scan"), self.scan_clearallservices))
+
+ for nim in nims_to_scan:
+ nimconfig = ConfigYesNo(default = True)
+ nimconfig.nim_index = nim.slot
+ self.nim_enable.append(nimconfig)
+ self.list.append(getConfigListEntry(_("Scan ") + nim.slot_name + " (" + nim.friendly_type + ")", nimconfig))
+
+ ConfigListScreen.__init__(self, self.list)
+ self["header"] = Label(_("Automatic Scan"))
+ self["footer"] = Label(_("Press OK to scan"))
+
+ def runAsync(self, finished_cb):
+ self.finished_cb = finished_cb
+ self.keyGo()
+
+ def keyGo(self):
+ self.scanList = []
+ self.known_networks = set()
+ self.nim_iter=0
+ self.buildTransponderList()
+
+ def buildTransponderList(self): # this method is called multiple times because of asynchronous stuff
+ APPEND_NOW = 0
+ SEARCH_CABLE_TRANSPONDERS = 1
+ action = APPEND_NOW
+
+ n = self.nim_iter < len(self.nim_enable) and self.nim_enable[self.nim_iter] or None
+ self.nim_iter += 1
+ if n:
+ if n.value: # check if nim is enabled
+ flags = 0
+ nim = nimmanager.nim_slots[n.nim_index]
+ networks = set(self.getNetworksForNim(nim))
+
+ # don't scan anything twice
+ networks.discard(self.known_networks)
+
+ tlist = [ ]
+ if nim.isCompatible("DVB-S"):
+ # get initial transponders for each satellite to be scanned
+ for sat in networks:
+ getInitialTransponderList(tlist, sat[0])
+ elif nim.isCompatible("DVB-C"):
+ if config.Nims[nim.slot].cable.scan_type.value == "provider":
+ getInitialCableTransponderList(tlist, nim.slot)
+ else:
+ action = SEARCH_CABLE_TRANSPONDERS
+ elif nim.isCompatible("DVB-T"):
+ getInitialTerrestrialTransponderList(tlist, nimmanager.getTerrestrialDescription(nim.slot))
+ else:
+ assert False
+
+ flags |= eComponentScan.scanNetworkSearch #FIXMEEE.. use flags from cables / satellites / terrestrial.xml
+ tmp = self.scan_clearallservices.value
+ if tmp == "yes":
+ flags |= eComponentScan.scanRemoveServices
+ elif tmp == "yes_hold_feeds":
+ flags |= eComponentScan.scanRemoveServices
+ flags |= eComponentScan.scanDontRemoveFeeds
+
+ if action == APPEND_NOW:
+ self.scanList.append({"transponders": tlist, "feid": nim.slot, "flags": flags})
+ elif action == SEARCH_CABLE_TRANSPONDERS:
+ self.flags = flags
+ self.feid = nim.slot
+ self.startCableTransponderSearch(nim.slot)
+ return
+ else:
+ assert False
+
+ self.buildTransponderList() # recursive call of this function !!!
+ return
+ # when we are here, then the recursion is finished and all enabled nims are checked
+ # so we now start the real transponder scan
+ self.startScan(self.scanList)
+
+ def startScan(self, scanList):
+ if len(scanList):
+ if self.finished_cb:
+ self.session.openWithCallback(self.finished_cb, ServiceScan, scanList = scanList)
+ else:
+ self.session.open(ServiceScan, scanList = scanList)
+ else:
+ if self.finished_cb:
+ self.session.openWithCallback(self.finished_cb, MessageBox, _("Nothing to scan!\nPlease setup your tuner settings before you start a service scan."), MessageBox.TYPE_ERROR)
+ else:
+ self.session.open(MessageBox, _("Nothing to scan!\nPlease setup your tuner settings before you start a service scan."), MessageBox.TYPE_ERROR)
- for slotid in nimmanager.getNimListOfType(nimmanager.nimType["DVB-S"]):
- SatList = nimmanager.getSatListForNim(slotid)
+ def setCableTransponderSearchResult(self, tlist):
+ self.scanList.append({"transponders": tlist, "feid": self.feid, "flags": self.flags})
- for x in SatList:
- if self.Satexists(tlist, x[1]) == 0:
- tlist.append(x[1])
- sat = configElement_nonSave(x[1], configSelection, 0, (("enable", _("Enable")), ("disable", _("Disable"))))
- self.list.append(getConfigListEntry(nimmanager.getSatDescription(x[1]), sat))
+ def cableTransponderSearchFinished(self):
+ self.buildTransponderList()
+
+ def keyCancel(self):
+ self.close()
+
+ def Satexists(self, tlist, pos):
+ for x in tlist:
+ if x == pos:
+ return 1
+ return 0
- self["config"] = ConfigList(self.list)
- self["header"] = Label(_("Automatic Scan"))
- self["footer"] = Label(_("Press OK to scan"))
git.cweiske.de / enigma2.git / blobdiff