self.addSatellite(sec, orbpos)
elif (diseqcmode == 3): # diseqc 1.2
if self.satposdepends.has_key(slotid):
- tunermask |= (1 << self.satposdepends[slotid])
+ for slot in self.satposdepends[slotid]:
+ tunermask |= (1 << slot)
sec.setLatitude(latitude)
sec.setLaDirection(laDirection)
sec.setLongitude(longitude)
if not self.satposdepends.has_key(connto):
self.satposdepends[connto] = []
self.satposdepends[connto].append(x)
-
for slot in nim_slots:
x = slot.slot
def updateAdvanced(self, sec, slotid):
lnbSat = {}
- for x in range(1,33):
+ for x in range(1,129):
lnbSat[x] = []
+
+ #wildcard for all satellites ( for rotor )
+ for x in range(3601, 3605):
+ lnb = int(config.Nims[slotid].advanced.sat[x].lnb.value)
+ if lnb != 0:
+ for x in self.NimManager.satList:
+ print "add", x[0], "to", lnb
+ lnbSat[lnb].append(x[0])
+
for x in self.NimManager.satList:
lnb = int(config.Nims[slotid].advanced.sat[x[0]].lnb.value)
if lnb != 0:
print "add", x[0], "to", lnb
lnbSat[lnb].append(x[0])
- for x in range(1,33):
+
+ for x in range(1,129):
if len(lnbSat[x]) > 0:
currLnb = config.Nims[slotid].advanced.lnb[x]
sec.addLNB()
tunermask = 1 << slotid
if self.equal.has_key(slotid):
- tunermask |= (1 << self.equal[slotid])
+ for slot in self.equal[slotid]:
+ tunermask |= (1 << slot)
elif self.linked.has_key(slotid):
- tunermask |= (1 << self.linked[slotid])
+ for slot in self.linked[slotid]:
+ tunermask |= (1 << slot)
if currLnb.lof.value == "universal_lnb":
sec.setLNBLOFL(9750000)
elif currSat.tonemode == "off":
sec.setToneMode(switchParam.OFF)
- if not currSat.usals.value:
+ if not currSat.usals.value and x < 125:
sec.setRotorPosNum(currSat.rotorposition.value)
else:
sec.setRotorPosNum(0) #USALS
slots.append(self.nim_slots[slotid].internallyConnectableTo())
for type in self.nim_slots[slotid].connectableTo():
for slot in self.getNimListOfType(type, exception = slotid):
- # FIXME we restrict loopthrough from dvb-s2 to dvb-s, because the c++ part can't handle it
- if not (type == "DVB-S" and self.getNimType(slot)):
- if self.hasOutputs(slot):
- slots.append(slot)
+ if self.hasOutputs(slot):
+ slots.append(slot)
+ # remove nims, that have a conntectedTo reference on
+ for testnim in slots[:]:
+ for nim in self.getNimListOfType("DVB-S", slotid):
+ nimConfig = self.getNimConfig(nim)
+ if nimConfig.content.items.has_key("configMode") and nimConfig.configMode.value == "loopthrough" and int(nimConfig.connectedTo.value) == testnim:
+ slots.remove(testnim)
+ break
slots.sort()
return slots
def getNimConfig(self, slotid):
return config.Nims[slotid]
+
+ def getSatName(self, pos):
+ for sat in self.satList:
+ if sat[0] == pos:
+ return sat[1]
+ return _("N/A")
def getSatList(self):
return self.satList
def getSatListForNim(self, slotid):
list = []
if self.nim_slots[slotid].isCompatible("DVB-S"):
+ nim = config.Nims[slotid]
#print "slotid:", slotid
#print "self.satellites:", self.satList[config.Nims[slotid].diseqcA.index]
#print "diseqcA:", config.Nims[slotid].diseqcA.value
- configMode = config.Nims[slotid].configMode.value
+ configMode = nim.configMode.value
if configMode == "equal":
- slotid=0 #FIXME add handling for more than two tuners !!!
- configMode = config.Nims[slotid].configMode.value
+ slotid = int(nim.connectedTo.value)
+ nim = config.Nims[slotid]
+ configMode = nim.configMode.value
+ elif configMode == "loopthrough":
+ slotid = self.sec.getRoot(slotid, int(nim.connectedTo.value))
+ nim = config.Nims[slotid]
+ configMode = nim.configMode.value
if configMode == "simple":
- dm = config.Nims[slotid].diseqcMode.value
+ dm = nim.diseqcMode.value
if dm in ["single", "toneburst_a_b", "diseqc_a_b", "diseqc_a_b_c_d"]:
- list.append(self.satList[config.Nims[slotid].diseqcA.index])
+ list.append(self.satList[nim.diseqcA.index])
if dm in ["toneburst_a_b", "diseqc_a_b", "diseqc_a_b_c_d"]:
- list.append(self.satList[config.Nims[slotid].diseqcB.index])
+ list.append(self.satList[nim.diseqcB.index])
if dm == "diseqc_a_b_c_d":
- list.append(self.satList[config.Nims[slotid].diseqcC.index])
- list.append(self.satList[config.Nims[slotid].diseqcD.index])
+ list.append(self.satList[nim.diseqcC.index])
+ list.append(self.satList[nim.diseqcD.index])
if dm == "positioner":
for x in self.satList:
list.append(x)
elif configMode == "advanced":
for x in self.satList:
- if int(config.Nims[slotid].advanced.sat[x[0]].lnb.value) != 0:
+ if int(nim.advanced.sat[x[0]].lnb.value) != 0:
list.append(x)
-
return list
def getRotorSatListForNim(self, slotid):
list = []
if self.nim_slots[slotid].isCompatible("DVB-S"):
#print "slotid:", slotid
-
#print "self.satellites:", self.satList[config.Nims[slotid].diseqcA.value]
#print "diseqcA:", config.Nims[slotid].diseqcA.value
configMode = config.Nims[slotid].configMode.value
x.addNotifier(lambda configElement: secClass.setParam(secClass.DELAY_AFTER_TONEBURST, configElement.value))
config.sec.delay_after_toneburst = x
+ x = ConfigInteger(default=20, limits = (0, 9999))
+ x.addNotifier(lambda configElement: secClass.setParam(secClass.DELAY_AFTER_VOLTAGE_CHANGE_BEFORE_SWITCH_CMDS, configElement.value))
+ config.sec.delay_after_change_voltage_before_switch_command = x
+
x = ConfigInteger(default=200, limits = (0, 9999))
x.addNotifier(lambda configElement: secClass.setParam(secClass.DELAY_AFTER_ENABLE_VOLTAGE_BEFORE_SWITCH_CMDS, configElement.value))
config.sec.delay_after_enable_voltage_before_switch_command = x
x.addNotifier(lambda configElement: secClass.setParam(secClass.DELAY_BETWEEN_SWITCH_AND_MOTOR_CMD, configElement.value))
config.sec.delay_between_switch_and_motor_command = x
- x = ConfigInteger(default=150, limits = (0, 9999))
+ x = ConfigInteger(default=500, limits = (0, 9999))
x.addNotifier(lambda configElement: secClass.setParam(secClass.DELAY_AFTER_VOLTAGE_CHANGE_BEFORE_MEASURE_IDLE_INPUTPOWER, configElement.value))
config.sec.delay_after_voltage_change_before_measure_idle_inputpower = x
x.addNotifier(lambda configElement: secClass.setParam(secClass.DELAY_AFTER_ENABLE_VOLTAGE_BEFORE_MOTOR_CMD, configElement.value))
config.sec.delay_after_enable_voltage_before_motor_command = x
- x = ConfigInteger(default=150, limits = (0, 9999))
+ x = ConfigInteger(default=500, limits = (0, 9999))
x.addNotifier(lambda configElement: secClass.setParam(secClass.DELAY_AFTER_MOTOR_STOP_CMD, configElement.value))
config.sec.delay_after_motor_stop_command = x
- x = ConfigInteger(default=150, limits = (0, 9999))
+ x = ConfigInteger(default=500, limits = (0, 9999))
x.addNotifier(lambda configElement: secClass.setParam(secClass.DELAY_AFTER_VOLTAGE_CHANGE_BEFORE_MOTOR_CMD, configElement.value))
config.sec.delay_after_voltage_change_before_motor_command = x
x.addNotifier(lambda configElement: secClass.setParam(secClass.MOTOR_COMMAND_RETRIES, configElement.value))
config.sec.motor_command_retries = x
- x = ConfigInteger(default=20, limits = (0, 9999))
- x.addNotifier(lambda configElement: secClass.setParam(secClass.DELAY_AFTER_VOLTAGE_CHANGE_BEFORE_SWITCH_CMDS, configElement.value))
- config.sec.delay_after_change_voltage_before_switch_command = x
-
# TODO add support for satpos depending nims to advanced nim configuration
# so a second/third/fourth cable from a motorized lnb can used behind a
# diseqc 1.0 / diseqc 1.1 / toneburst switch
# advanced config:
nim.advanced = ConfigSubsection()
- nim.advanced.sats = getConfigSatlist(192,nimmgr.satList)
+ tmp = [(3601, _('All Satellites 1'), 1), (3602, _('All Satellites 2'), 1), (3603, _('All Satellites 3'), 1), (3604, _('All Satellites 4'), 1)]
+ nim.advanced.sats = getConfigSatlist(192,nimmgr.satList+tmp)
nim.advanced.sat = ConfigSubDict()
lnbs = [("0", "not available")]
- for y in range(1, 33):
+ for y in range(1, 125):
lnbs.append((str(y), "LNB " + str(y)))
for x in nimmgr.satList:
nim.advanced.sat[x[0]].rotorposition = ConfigInteger(default=1, limits=(1, 255))
nim.advanced.sat[x[0]].lnb = ConfigSelection(choices = lnbs)
+ for x in range(3601, 3605):
+ nim.advanced.sat[x] = ConfigSubsection()
+ nim.advanced.sat[x].voltage = ConfigSelection(choices={"polarization": _("Polarization"), "13V": _("13 V"), "18V": _("18 V")}, default = "polarization")
+ nim.advanced.sat[x].tonemode = ConfigSelection(choices={"band": _("Band"), "on": _("On"), "off": _("Off")}, default = "band")
+ nim.advanced.sat[x].usals = ConfigYesNo(default=True)
+ nim.advanced.sat[x].rotorposition = ConfigInteger(default=1, limits=(1, 255))
+ lnbnum = 125+x-3601
+ nim.advanced.sat[x].lnb = ConfigSelection(choices = [("0", "not available"), (str(lnbnum), "LNB %d"%(lnbnum))], default="0")
+
csw = [("none", _("None")), ("AA", _("AA")), ("AB", _("AB")), ("BA", _("BA")), ("BB", _("BB"))]
for y in range(0, 16):
csw.append((str(0xF0|y), "Input " + str(y+1)))
nim.advanced.lnb = ConfigSubList()
nim.advanced.lnb.append(ConfigNothing())
- for x in range(1, 33):
+ for x in range(1, 129):
nim.advanced.lnb.append(ConfigSubsection())
nim.advanced.lnb[x].lof = ConfigSelection(choices={"universal_lnb": _("Universal LNB"), "c_band": _("C-Band"), "user_defined": _("User defined")}, default="universal_lnb")
nim.advanced.lnb[x].lofl = ConfigInteger(default=9750, limits = (0, 99999))
# nim.advanced.lnb[x].output_12v = ConfigSelection(choices = [("0V", _("0 V")), ("12V", _("12 V"))], default="0V")
nim.advanced.lnb[x].increased_voltage = ConfigYesNo(default=False)
nim.advanced.lnb[x].toneburst = ConfigSelection(choices = [("none", _("None")), ("A", _("A")), ("B", _("B"))], default = "none")
- nim.advanced.lnb[x].diseqcMode = ConfigSelection(choices = [("none", _("None")), ("1_0", _("1.0")), ("1_1", _("1.1")), ("1_2", _("1.2"))], default = "none")
+ if x > 124:
+ nim.advanced.lnb[x].diseqcMode = ConfigSelection(choices = [("1_2", _("1.2"))], default = "1_2")
+ else:
+ nim.advanced.lnb[x].diseqcMode = ConfigSelection(choices = [("none", _("None")), ("1_0", _("1.0")), ("1_1", _("1.1")), ("1_2", _("1.2"))], default = "none")
nim.advanced.lnb[x].commitedDiseqcCommand = ConfigSelection(choices = csw)
nim.advanced.lnb[x].fastDiseqc = ConfigYesNo(default=False)
nim.advanced.lnb[x].sequenceRepeat = ConfigYesNo(default=False)
git.cweiske.de / enigma2.git / blobdiff