Merge commit 'origin/translations' into experimental

[enigma2.git] / lib / dvb / sec.h

diff --git a/lib/dvb/sec.h b/lib/dvb/sec.h
index ac18f3c66116d7cd8ce04456389a29778725f836..c50aee4d381c28dcb9712cb064efda508790e97b 100644 (file)
--- a/lib/dvb/sec.h
+++ b/lib/dvb/sec.h
@@ -19,19 +19,33 @@ public:
                MEASURE_IDLE_INPUTPOWER, MEASURE_RUNNING_INPUTPOWER,
                IF_MEASURE_IDLE_WAS_NOT_OK_GOTO, IF_INPUTPOWER_DELTA_GOTO,
                UPDATE_CURRENT_ROTORPARAMS, INVALIDATE_CURRENT_ROTORPARMS,
                MEASURE_IDLE_INPUTPOWER, MEASURE_RUNNING_INPUTPOWER,
                IF_MEASURE_IDLE_WAS_NOT_OK_GOTO, IF_INPUTPOWER_DELTA_GOTO,
                UPDATE_CURRENT_ROTORPARAMS, INVALIDATE_CURRENT_ROTORPARMS,

-               IF_ROTORPOS_VALID_GOTO
+               UPDATE_CURRENT_SWITCHPARMS, INVALIDATE_CURRENT_SWITCHPARMS,
+               IF_ROTORPOS_VALID_GOTO,
+               IF_TUNER_LOCKED_GOTO,
+               IF_TONE_GOTO, IF_NOT_TONE_GOTO,
+               START_TUNE_TIMEOUT,
+               SET_ROTOR_MOVING,
+               SET_ROTOR_STOPPED

        };
        int cmd;
        struct rotor
        {
        };
        int cmd;
        struct rotor
        {

-               int deltaA;   // difference in mA between running and stopped rotor
+               union {
+                       int deltaA;   // difference in mA between running and stopped rotor
+                       int lastSignal;
+               };

                int okcount;  // counter
                int steps;    // goto steps
                int direction;
        };
        struct pair
        {
                int okcount;  // counter
                int steps;    // goto steps
                int direction;
        };
        struct pair
        {

-               int voltage;
+               union
+               {
+                       int voltage;
+                       int tone;
+                       int val;
+               };

                int steps;
        };
        union
                int steps;
        };
        union


@@ -156,7 +170,7 @@ class eDVBSatelliteSwitchParameters
 #endif
 public:
        enum t_22khz_signal {   HILO=0, ON=1, OFF=2     }; // 22 Khz
 #endif
 public:
        enum t_22khz_signal {   HILO=0, ON=1, OFF=2     }; // 22 Khz

-       enum t_voltage_mode     {       HV=0, _14V=1, _18V=2, _0V=3 }; // 14/18 V
+       enum t_voltage_mode     {       HV=0, _14V=1, _18V=2, _0V=3, HV_13=4 }; // 14/18 V

 #ifndef SWIG
        t_voltage_mode m_voltage_mode;
        t_22khz_signal m_22khz_signal;
 #ifndef SWIG
        t_voltage_mode m_voltage_mode;
        t_22khz_signal m_22khz_signal;


@@ -172,6 +186,7 @@ class eDVBSatelliteRotorParameters
 #endif
 public:
        enum { NORTH, SOUTH, EAST, WEST };
 #endif
 public:
        enum { NORTH, SOUTH, EAST, WEST };

+       enum { FAST, SLOW };

 #ifndef SWIG
        eDVBSatelliteRotorParameters() { setDefaultOptions(); }
 
 #ifndef SWIG
        eDVBSatelliteRotorParameters() { setDefaultOptions(); }
 


@@ -179,6 +194,7 @@ public:
        {
                bool m_use;     // can we use rotor inputpower to detect rotor running state ?
                __u8 m_delta;   // delta between running and stopped rotor
        {
                bool m_use;     // can we use rotor inputpower to detect rotor running state ?
                __u8 m_delta;   // delta between running and stopped rotor

+               unsigned int m_turning_speed; // SLOW, FAST, or fast turning epoch

        };
        eDVBSatelliteRotorInputpowerParameters m_inputpower_parameters;
 
        };
        eDVBSatelliteRotorInputpowerParameters m_inputpower_parameters;
 


@@ -193,6 +209,7 @@ public:
 
        void setDefaultOptions() // set default rotor options
        {
 
        void setDefaultOptions() // set default rotor options
        {

+               m_inputpower_parameters.m_turning_speed = FAST; // fast turning

                m_inputpower_parameters.m_use = true;
                m_inputpower_parameters.m_delta = 60;
                m_gotoxx_parameters.m_lo_direction = EAST;
                m_inputpower_parameters.m_use = true;
                m_inputpower_parameters.m_delta = 60;
                m_gotoxx_parameters.m_lo_direction = EAST;


@@ -214,7 +231,7 @@ public:
 #ifndef SWIG
        t_12V_relais_state m_12V_relais_state;  // 12V relais output on/off
 
 #ifndef SWIG
        t_12V_relais_state m_12V_relais_state;  // 12V relais output on/off
 

-       __u8 tuner_mask; // useable by tuner ( 1 | 2 | 4...)
+       int m_slot_mask; // useable by slot ( 1 | 2 | 4...)

 
        unsigned int m_lof_hi,  // for 2 band universal lnb 10600 Mhz (high band offset frequency)
                                m_lof_lo,       // for 2 band universal lnb  9750 Mhz (low band offset frequency)
 
        unsigned int m_lof_hi,  // for 2 band universal lnb 10600 Mhz (high band offset frequency)
                                m_lof_lo,       // for 2 band universal lnb  9750 Mhz (low band offset frequency)


@@ -225,44 +242,90 @@ public:
        std::map<int, eDVBSatelliteSwitchParameters> m_satellites;
        eDVBSatelliteDiseqcParameters m_diseqc_parameters;
        eDVBSatelliteRotorParameters m_rotor_parameters;
        std::map<int, eDVBSatelliteSwitchParameters> m_satellites;
        eDVBSatelliteDiseqcParameters m_diseqc_parameters;
        eDVBSatelliteRotorParameters m_rotor_parameters;

+
+       int m_prio; // to override automatic tuner management ... -1 is Auto

 #endif
 #endif

+public:
+#define guard_offset_min -8000
+#define guard_offset_max 8000
+#define guard_offset_step 8000
+#define MAX_SATCR 8
+#define MAX_LNBNUM 32
+
+       int SatCR_idx;
+       unsigned int SatCRvco;
+       unsigned int UnicableTuningWord;
+       unsigned int UnicableConfigWord;
+       int old_frequency;
+       int old_polarisation;
+       int old_orbital_position;
+       int guard_offset_old;
+       int guard_offset;
+       int LNBNum;

 };
 
 class eDVBRegisteredFrontend;
 
 class eDVBSatelliteEquipmentControl: public iDVBSatelliteEquipmentControl
 {
 };
 
 class eDVBRegisteredFrontend;
 
 class eDVBSatelliteEquipmentControl: public iDVBSatelliteEquipmentControl
 {

+       DECLARE_REF(eDVBSatelliteEquipmentControl);
+public:
+       enum {
+               DELAY_AFTER_CONT_TONE_DISABLE_BEFORE_DISEQC=0,  // delay after continuous tone disable before diseqc command
+               DELAY_AFTER_FINAL_CONT_TONE_CHANGE, // delay after continuous tone change before tune
+               DELAY_AFTER_FINAL_VOLTAGE_CHANGE, // delay after voltage change at end of complete sequence
+               DELAY_BETWEEN_DISEQC_REPEATS, // delay between repeated diseqc commands
+               DELAY_AFTER_LAST_DISEQC_CMD, // delay after last diseqc command
+               DELAY_AFTER_TONEBURST, // delay after toneburst
+               DELAY_AFTER_ENABLE_VOLTAGE_BEFORE_SWITCH_CMDS, // delay after enable voltage before transmit toneburst/diseqc
+               DELAY_BETWEEN_SWITCH_AND_MOTOR_CMD, // delay after transmit toneburst / diseqc and before transmit motor command
+               DELAY_AFTER_VOLTAGE_CHANGE_BEFORE_MEASURE_IDLE_INPUTPOWER, // delay after voltage change before measure idle input power
+               DELAY_AFTER_ENABLE_VOLTAGE_BEFORE_MOTOR_CMD, // delay after enable voltage before transmit motor command
+               DELAY_AFTER_MOTOR_STOP_CMD, // delay after transmit motor stop
+               DELAY_AFTER_VOLTAGE_CHANGE_BEFORE_MOTOR_CMD, // delay after voltage change before transmit motor command
+               DELAY_BEFORE_SEQUENCE_REPEAT, // delay before the complete sequence is repeated (when enabled)
+               MOTOR_COMMAND_RETRIES, // max transmit tries of rotor command when the rotor dont start turning (with power measurement)
+               MOTOR_RUNNING_TIMEOUT, // max motor running time before timeout
+               DELAY_AFTER_VOLTAGE_CHANGE_BEFORE_SWITCH_CMDS, // delay after change voltage before transmit toneburst/diseqc
+               DELAY_AFTER_DISEQC_RESET_CMD,
+               DELAY_AFTER_DISEQC_PERIPHERIAL_POWERON_CMD,
+               MAX_PARAMS
+       };
+private:

 #ifndef SWIG
        static eDVBSatelliteEquipmentControl *instance;
 #ifndef SWIG
        static eDVBSatelliteEquipmentControl *instance;

-       eDVBSatelliteLNBParameters m_lnbs[128]; // i think its enough
+       eDVBSatelliteLNBParameters m_lnbs[144]; // i think its enough

        int m_lnbidx; // current index for set parameters
        std::map<int, eDVBSatelliteSwitchParameters>::iterator m_curSat;
        int m_lnbidx; // current index for set parameters
        std::map<int, eDVBSatelliteSwitchParameters>::iterator m_curSat;

-       eSmartPtrList<eDVBRegisteredFrontend> &m_avail_frontends;
-       bool m_rotorMoving;
+       eSmartPtrList<eDVBRegisteredFrontend> &m_avail_frontends, &m_avail_simulate_frontends;
+       int m_rotorMoving;
+       int m_not_linked_slot_mask;
+       bool m_canMeasureInputPower;

 #endif
 #ifdef SWIG
        eDVBSatelliteEquipmentControl();
        ~eDVBSatelliteEquipmentControl();
 #endif
 #endif
 #ifdef SWIG
        eDVBSatelliteEquipmentControl();
        ~eDVBSatelliteEquipmentControl();
 #endif

-       // helper function for setTunerLinked and setTunerDepends
-       RESULT setDependencyPointers( int no1, int no2, int dest_data_byte );
+       static int m_params[MAX_PARAMS];

 public:
 #ifndef SWIG
 public:
 #ifndef SWIG

-       eDVBSatelliteEquipmentControl(eSmartPtrList<eDVBRegisteredFrontend> &avail_frontends);
-       DECLARE_REF(eDVBSatelliteEquipmentControl);
-       RESULT prepare(iDVBFrontend &frontend, FRONTENDPARAMETERS &parm, eDVBFrontendParametersSatellite &sat, int frontend_id);
-       int canTune(const eDVBFrontendParametersSatellite &feparm, iDVBFrontend *, int frontend_id);
+       eDVBSatelliteEquipmentControl(eSmartPtrList<eDVBRegisteredFrontend> &avail_frontends, eSmartPtrList<eDVBRegisteredFrontend> &avail_simulate_frontends);
+       RESULT prepare(iDVBFrontend &frontend, FRONTENDPARAMETERS &parm, const eDVBFrontendParametersSatellite &sat, int frontend_id, unsigned int tunetimeout);
+       int canTune(const eDVBFrontendParametersSatellite &feparm, iDVBFrontend *, int frontend_id, int *highest_score_lnb=0);

        bool currentLNBValid() { return m_lnbidx > -1 && m_lnbidx < (int)(sizeof(m_lnbs) / sizeof(eDVBSatelliteLNBParameters)); }
 #endif
        static eDVBSatelliteEquipmentControl *getInstance() { return instance; }
        bool currentLNBValid() { return m_lnbidx > -1 && m_lnbidx < (int)(sizeof(m_lnbs) / sizeof(eDVBSatelliteLNBParameters)); }
 #endif
        static eDVBSatelliteEquipmentControl *getInstance() { return instance; }

+       static void setParam(int param, int value);

        RESULT clear();
 /* LNB Specific Parameters */
        RESULT addLNB();
        RESULT clear();
 /* LNB Specific Parameters */
        RESULT addLNB();

-       RESULT setLNBTunerMask(int tunermask);
+       RESULT setLNBSlotMask(int slotmask);

        RESULT setLNBLOFL(int lofl);
        RESULT setLNBLOFH(int lofh);
        RESULT setLNBThreshold(int threshold);
        RESULT setLNBIncreasedVoltage(bool onoff);
        RESULT setLNBLOFL(int lofl);
        RESULT setLNBLOFH(int lofh);
        RESULT setLNBThreshold(int threshold);
        RESULT setLNBIncreasedVoltage(bool onoff);

+       RESULT setLNBPrio(int prio);
+       RESULT setLNBNum(int LNBNum);

 /* DiSEqC Specific Parameters */
        RESULT setDiSEqCMode(int diseqcmode);
        RESULT setToneburst(int toneburst);
 /* DiSEqC Specific Parameters */
        RESULT setDiSEqCMode(int diseqcmode);
        RESULT setToneburst(int toneburst);


@@ -279,6 +342,13 @@ public:
        RESULT setLaDirection(int direction);
        RESULT setUseInputpower(bool onoff);
        RESULT setInputpowerDelta(int delta);  // delta between running and stopped rotor
        RESULT setLaDirection(int direction);
        RESULT setUseInputpower(bool onoff);
        RESULT setInputpowerDelta(int delta);  // delta between running and stopped rotor

+       RESULT setRotorTurningSpeed(int speed);  // set turning speed..
+/* Unicable Specific Parameters */
+       RESULT setLNBSatCR(int SatCR_idx);
+       RESULT setLNBSatCRvco(int SatCRvco);
+//     RESULT checkGuardOffset(const eDVBFrontendParametersSatellite &sat);
+       RESULT getLNBSatCR();
+       RESULT getLNBSatCRvco();

 /* Satellite Specific Parameters */
        RESULT addSatellite(int orbital_position);
        RESULT setVoltageMode(int mode);
 /* Satellite Specific Parameters */
        RESULT addSatellite(int orbital_position);
        RESULT setVoltageMode(int mode);


@@ -287,9 +357,11 @@ public:
 /* Tuner Specific Parameters */
        RESULT setTunerLinked(int from, int to);
        RESULT setTunerDepends(int from, int to);
 /* Tuner Specific Parameters */
        RESULT setTunerLinked(int from, int to);
        RESULT setTunerDepends(int from, int to);

+       void setSlotNotLinked(int tuner_no);

 
 

-       void setRotorMoving(bool); // called from the frontend's
+       void setRotorMoving(int, bool); // called from the frontend's

        bool isRotorMoving();
        bool isRotorMoving();

+       bool canMeasureInputPower() { return m_canMeasureInputPower; }

 };
 
 #endif
 };
 
 #endif