#include <config.h>
+#include <lib/dvb/dvb.h>
#include <lib/dvb/sec.h>
#include <lib/dvb/rotor_calc.h>
DEFINE_REF(eDVBSatelliteEquipmentControl);
-eDVBSatelliteEquipmentControl::eDVBSatelliteEquipmentControl()
- :m_lnbidx(-1), m_curSat(m_lnbs[0].m_satellites.end())
+eDVBSatelliteEquipmentControl *eDVBSatelliteEquipmentControl::instance;
+
+eDVBSatelliteEquipmentControl::eDVBSatelliteEquipmentControl(eSmartPtrList<eDVBRegisteredFrontend> &avail_frontends)
+ :m_lnbidx(-1), m_curSat(m_lnbs[0].m_satellites.end()), m_avail_frontends(avail_frontends)
{
- clear();
+ if (!instance)
+ instance = this;
-#undef ROTOR
+ clear();
// ASTRA
addLNB();
- setLNBTunerMask(1);
+ setLNBTunerMask(3);
setLNBLOFL(9750000);
setLNBThreshold(11750000);
-#ifdef ROTOR
- setLNBLOFH(10600000);
- setDiSEqCMode(eDVBSatelliteDiseqcParameters::V1_2);
-#else
setLNBLOFH(10607000);
setDiSEqCMode(eDVBSatelliteDiseqcParameters::V1_0);
-#endif
setToneburst(eDVBSatelliteDiseqcParameters::NO);
setRepeats(0);
-#ifdef ROTOR
- setCommittedCommand(eDVBSatelliteDiseqcParameters::AA);
-#else
setCommittedCommand(eDVBSatelliteDiseqcParameters::BB);
-#endif
setCommandOrder(0); // committed, toneburst
setFastDiSEqC(true);
-#ifdef ROTOR
- setLongitude(8.683);
- setLatitude(51.017);
- setLoDirection(eDVBSatelliteRotorParameters::EAST);
- setLaDirection(eDVBSatelliteRotorParameters::NORTH);
- setUseInputpower(true);
- setInputpowerDelta(50);
-#endif
+ setSeqRepeat(false);
addSatellite(192);
setVoltageMode(eDVBSatelliteSwitchParameters::HV);
setToneMode(eDVBSatelliteSwitchParameters::HILO);
-#ifdef ROTOR
- setRotorPosNum(0); // use gotoXX
-#else
+
// HOTBIRD
addLNB();
- setLNBTunerMask(1);
+ setLNBTunerMask(3);
setLNBLOFL(9750000);
setLNBLOFH(10600000);
setLNBThreshold(11750000);
setCommittedCommand(eDVBSatelliteDiseqcParameters::AB);
setCommandOrder(0); // committed, toneburst
setFastDiSEqC(true);
-#endif
+ setSeqRepeat(false);
addSatellite(130);
setVoltageMode(eDVBSatelliteSwitchParameters::HV);
setToneMode(eDVBSatelliteSwitchParameters::HILO);
-#ifdef ROTOR
- setRotorPosNum(0); // use gotoXX
-#endif
}
-RESULT eDVBSatelliteEquipmentControl::prepare(iDVBFrontend &frontend, FRONTENDPARAMETERS &parm, eDVBFrontendParametersSatellite &sat)
+int eDVBSatelliteEquipmentControl::canTune(const eDVBFrontendParametersSatellite &sat, iDVBFrontend *fe, int frontend_id )
+{
+ int ret=0;
+
+ for (int idx=0; idx <= m_lnbidx; ++idx )
+ {
+ eDVBSatelliteLNBParameters &lnb_param = m_lnbs[idx];
+ if ( lnb_param.tuner_mask & frontend_id ) // lnb for correct tuner?
+ {
+ eDVBSatelliteDiseqcParameters &di_param = lnb_param.m_diseqc_parameters;
+
+ std::map<int, eDVBSatelliteSwitchParameters>::iterator sit =
+ lnb_param.m_satellites.find(sat.orbital_position);
+ if ( sit != lnb_param.m_satellites.end())
+ {
+ int band=0,
+ linked_to=0, // linked tuner
+ csw = di_param.m_committed_cmd,
+ ucsw = di_param.m_uncommitted_cmd,
+ toneburst = di_param.m_toneburst_param,
+ curRotorPos;
+
+ fe->getData(6, curRotorPos);
+ fe->getData(7, linked_to);
+
+ if ( sat.frequency > lnb_param.m_lof_threshold )
+ band |= 1;
+ if (sat.polarisation == eDVBFrontendParametersSatellite::Polarisation::Horizontal)
+ band |= 2;
+
+ bool rotor=false;
+ bool diseqc=false;
+
+ if (di_param.m_diseqc_mode >= eDVBSatelliteDiseqcParameters::V1_0)
+ {
+ diseqc=true;
+ if ( di_param.m_committed_cmd < eDVBSatelliteDiseqcParameters::SENDNO )
+ {
+ csw = 0xF0 | (csw << 2);
+ csw |= band;
+ }
+
+ if ( di_param.m_diseqc_mode == eDVBSatelliteDiseqcParameters::V1_2 ) // ROTOR
+ {
+ rotor=true;
+ if ( curRotorPos == sat.orbital_position )
+ ret=20;
+ else
+ ret=10;
+ }
+ }
+
+ if (!ret)
+ ret=40;
+
+ if (linked_to != -1) // check for linked tuners..
+ {
+ bool found=false;
+ eSmartPtrList<eDVBRegisteredFrontend>::iterator it(m_avail_frontends.begin());
+ for (; it != m_avail_frontends.end(); ++it)
+ if ( !linked_to )
+ {
+ found=true;
+ break;
+ }
+ else
+ --linked_to;
+
+ if (found && it->m_inuse)
+ {
+ int ocsw = -1,
+ oucsw = -1,
+ oToneburst = -1,
+ oRotorPos = -1;
+ it->m_frontend->getData(0, ocsw);
+ it->m_frontend->getData(1, oucsw);
+ it->m_frontend->getData(2, oToneburst);
+ it->m_frontend->getData(6, oRotorPos);
+
+ eDebug("compare csw %02x == lcsw %02x",
+ csw, ocsw);
+ if ( diseqc )
+ eDebug("compare ucsw %02x == lucsw %02x\ncompare toneburst %02x == oToneburst %02x",
+ ucsw, oucsw, toneburst, oToneburst);
+ if ( rotor )
+ eDebug("compare pos %d == current pos %d",
+ sat.orbital_position, oRotorPos);
+
+ if ( (csw != ocsw) ||
+ ( diseqc && (ucsw != oucsw || toneburst != oToneburst) ) ||
+ ( rotor && oRotorPos != sat.orbital_position ) )
+ {
+ eDebug("can not tune this transponder with linked tuner in use!!");
+ ret=0;
+ }
+ else
+ eDebug("OK .. can tune this transponder with linked tuner in use :)");
+ }
+ }
+ }
+ }
+ }
+ return ret;
+}
+
+RESULT eDVBSatelliteEquipmentControl::prepare(iDVBFrontend &frontend, FRONTENDPARAMETERS &parm, eDVBFrontendParametersSatellite &sat, int frontend_id)
{
+ bool linked=false;
+
for (int idx=0; idx <= m_lnbidx; ++idx )
{
eDVBSatelliteLNBParameters &lnb_param = m_lnbs[idx];
+ if (!(lnb_param.tuner_mask & frontend_id)) // lnb for correct tuner?
+ continue;
eDVBSatelliteDiseqcParameters &di_param = lnb_param.m_diseqc_parameters;
eDVBSatelliteRotorParameters &rotor_param = lnb_param.m_rotor_parameters;
{
eDVBSatelliteSwitchParameters &sw_param = sit->second;
- int hi=0,
+ int band=0,
+ linked_to=-1, // linked tuner
voltage = iDVBFrontend::voltageOff,
tone = iDVBFrontend::toneOff,
csw = di_param.m_committed_cmd,
frontend.getData(2, lastToneburst);
frontend.getData(5, lastRotorCmd);
frontend.getData(6, curRotorPos);
+ frontend.getData(7, linked_to);
+
+ if (linked_to != -1)
+ {
+ bool found=false;
+ eSmartPtrList<eDVBRegisteredFrontend>::iterator it(m_avail_frontends.begin());
+ for (; it != m_avail_frontends.end(); ++it)
+ if ( !linked_to )
+ {
+ found=true;
+ break;
+ }
+ else
+ --linked_to;
+ if (found && it->m_inuse)
+ {
+ eDebug("[SEC] frontend is linked with another one and the other is in use.. so we dont do SEC!!");
+ linked=true;
+ }
+ }
if ( sat.frequency > lnb_param.m_lof_threshold )
- hi = 1;
+ band |= 1;
- if (hi)
+ if (band&1)
parm.FREQUENCY = sat.frequency - lnb_param.m_lof_hi;
else
parm.FREQUENCY = sat.frequency - lnb_param.m_lof_lo;
+ if (sat.polarisation == eDVBFrontendParametersSatellite::Polarisation::Horizontal)
+ band |= 2;
+
parm.INVERSION = (!sat.inversion) ? INVERSION_ON : INVERSION_OFF;
switch (sat.fec)
voltage = iDVBFrontend::voltage18;
if ( (sw_param.m_22khz_signal == eDVBSatelliteSwitchParameters::ON)
- || ( sw_param.m_22khz_signal == eDVBSatelliteSwitchParameters::HILO && hi ) )
+ || ( sw_param.m_22khz_signal == eDVBSatelliteSwitchParameters::HILO && (band&1) ) )
tone = iDVBFrontend::toneOn;
else if ( (sw_param.m_22khz_signal == eDVBSatelliteSwitchParameters::OFF)
- || ( sw_param.m_22khz_signal == eDVBSatelliteSwitchParameters::HILO && !hi ) )
+ || ( sw_param.m_22khz_signal == eDVBSatelliteSwitchParameters::HILO && !(band&1) ) )
tone = iDVBFrontend::toneOff;
eSecCommandList sec_sequence;
if ( di_param.m_committed_cmd < eDVBSatelliteDiseqcParameters::SENDNO )
{
csw = 0xF0 | (csw << 2);
- if (hi)
- csw |= 1;
- if (sat.polarisation == eDVBFrontendParametersSatellite::Polarisation::Horizontal)
- csw |= 2;
+ csw |= band;
}
bool send_csw =
compare.steps = +3;
sec_sequence.push_back( eSecCommand(eSecCommand::IF_VOLTAGE_GOTO, compare) ); // voltage already correct ?
sec_sequence.push_back( eSecCommand(eSecCommand::SET_VOLTAGE, voltage) );
- sec_sequence.push_back( eSecCommand(eSecCommand::SLEEP, 50) );
- }
-
- if ( di_param.m_command_order & 1 && // toneburst at begin of sequence
- changed_burst && di_param.m_toneburst_param != eDVBSatelliteDiseqcParameters::NO )
- {
- sec_sequence.push_back( eSecCommand(eSecCommand::SEND_TONEBURST, di_param.m_toneburst_param) );
sec_sequence.push_back( eSecCommand(eSecCommand::SLEEP, 50) );
- frontend.setData(2, di_param.m_toneburst_param);
}
- if ( send_diseqc )
+ for (int seq_repeat = 0; seq_repeat < (di_param.m_seq_repeat?2:1); ++seq_repeat)
{
- int loops=0;
+ if ( di_param.m_command_order & 1 && // toneburst at begin of sequence
+ changed_burst && di_param.m_toneburst_param != eDVBSatelliteDiseqcParameters::NO )
+ {
+ sec_sequence.push_back( eSecCommand(eSecCommand::SEND_TONEBURST, di_param.m_toneburst_param) );
+ sec_sequence.push_back( eSecCommand(eSecCommand::SLEEP, 50) );
+ }
- if ( send_csw )
- ++loops;
- if ( send_ucsw )
- ++loops;
+ if ( send_diseqc )
+ {
+ int loops=0;
- for ( int i=0; i < di_param.m_repeats; ++i )
- loops *= 2;
+ if ( send_csw )
+ ++loops;
+ if ( send_ucsw )
+ ++loops;
- for ( int i = 0; i < loops;) // fill commands...
- {
- eDVBDiseqcCommand diseqc;
- diseqc.len = 4;
- diseqc.data[0] = i ? 0xE1 : 0xE0;
- diseqc.data[1] = 0x10;
+ for ( int i=0; i < di_param.m_repeats; ++i )
+ loops *= 2;
- if ( !send_csw || (send_ucsw && (di_param.m_command_order & 4) ) )
- {
- diseqc.data[2] = 0x39;
- diseqc.data[3] = ucsw;
- }
- else
+ for ( int i = 0; i < loops;) // fill commands...
{
- diseqc.data[2] = 0x38;
- diseqc.data[3] = csw;
- }
- sec_sequence.push_back( eSecCommand(eSecCommand::SEND_DISEQC, diseqc) );
+ eDVBDiseqcCommand diseqc;
+ diseqc.len = 4;
+ diseqc.data[0] = i ? 0xE1 : 0xE0;
+ diseqc.data[1] = 0x10;
- i++;
- if ( i < loops )
- {
- int cmd=0;
- if (diseqc.data[2] == 0x38 && send_ucsw)
- cmd=0x39;
- else if (diseqc.data[2] == 0x39 && send_csw)
- cmd=0x38;
- if (cmd)
+ if ( !send_csw || (send_ucsw && (di_param.m_command_order & 4) ) )
{
- static int delay = (120 - 54) / 2; // standard says 100msek between two repeated commands
- sec_sequence.push_back( eSecCommand(eSecCommand::SLEEP, delay) );
- diseqc.data[2]=cmd;
- diseqc.data[3]=(cmd==0x38) ? csw : ucsw;
- sec_sequence.push_back( eSecCommand(eSecCommand::SEND_DISEQC, diseqc) );
- ++i;
- if ( i < loops )
- sec_sequence.push_back( eSecCommand(eSecCommand::SLEEP, delay ) );
- else
- sec_sequence.push_back( eSecCommand(eSecCommand::SLEEP, 50) );
+ diseqc.data[2] = 0x39;
+ diseqc.data[3] = ucsw;
}
- else // delay 120msek when no command is in repeat gap
- sec_sequence.push_back( eSecCommand(eSecCommand::SLEEP, 120) );
- }
- else
- sec_sequence.push_back( eSecCommand(eSecCommand::SLEEP, 50) );
+ else
+ {
+ diseqc.data[2] = 0x38;
+ diseqc.data[3] = csw;
+ }
+ sec_sequence.push_back( eSecCommand(eSecCommand::SEND_DISEQC, diseqc) );
+
+ i++;
+ if ( i < loops )
+ {
+ int cmd=0;
+ if (diseqc.data[2] == 0x38 && send_ucsw)
+ cmd=0x39;
+ else if (diseqc.data[2] == 0x39 && send_csw)
+ cmd=0x38;
+ if (cmd)
+ {
+ static int delay = (120 - 54) / 2; // standard says 100msek between two repeated commands
+ sec_sequence.push_back( eSecCommand(eSecCommand::SLEEP, delay) );
+ diseqc.data[2]=cmd;
+ diseqc.data[3]=(cmd==0x38) ? csw : ucsw;
+ sec_sequence.push_back( eSecCommand(eSecCommand::SEND_DISEQC, diseqc) );
+ ++i;
+ if ( i < loops )
+ sec_sequence.push_back( eSecCommand(eSecCommand::SLEEP, delay ) );
+ else
+ sec_sequence.push_back( eSecCommand(eSecCommand::SLEEP, 50) );
+ }
+ else // delay 120msek when no command is in repeat gap
+ sec_sequence.push_back( eSecCommand(eSecCommand::SLEEP, 120) );
+ }
+ else
+ sec_sequence.push_back( eSecCommand(eSecCommand::SLEEP, 50) );
- frontend.setData(0, csw);
- frontend.setData(1, ucsw);
+ frontend.setData(0, csw);
+ frontend.setData(1, ucsw);
+ frontend.setData(2, di_param.m_toneburst_param);
+ }
}
- }
- if ( !(di_param.m_command_order & 1) && // toneburst at end of sequence
- (changed_burst || send_diseqc) && di_param.m_toneburst_param != eDVBSatelliteDiseqcParameters::NO )
- {
- sec_sequence.push_back( eSecCommand(eSecCommand::SEND_TONEBURST, di_param.m_toneburst_param) );
- sec_sequence.push_back( eSecCommand(eSecCommand::SLEEP, 50) );
- frontend.setData(2, di_param.m_toneburst_param);
+ if ( !(di_param.m_command_order & 1) && // toneburst at end of sequence
+ (changed_burst || send_diseqc) && di_param.m_toneburst_param != eDVBSatelliteDiseqcParameters::NO )
+ {
+ sec_sequence.push_back( eSecCommand(eSecCommand::SEND_TONEBURST, di_param.m_toneburst_param) );
+ sec_sequence.push_back( eSecCommand(eSecCommand::SLEEP, 50) );
+ frontend.setData(2, di_param.m_toneburst_param);
+ }
}
if ( di_param.m_diseqc_mode == eDVBSatelliteDiseqcParameters::V1_2 )
eDVBSatelliteRotorParameters::EAST;
double SatLon = abs(sat.orbital_position)/10.00,
- SiteLat = rotor_param.m_gotoxx_parameters.m_latitude,
- SiteLon = rotor_param.m_gotoxx_parameters.m_longitude;
+ SiteLat = rotor_param.m_gotoxx_parameters.m_latitude,
+ SiteLon = rotor_param.m_gotoxx_parameters.m_longitude;
if ( rotor_param.m_gotoxx_parameters.m_la_direction == eDVBSatelliteRotorParameters::SOUTH )
SiteLat = -SiteLat;
// override first voltage change
*(++(++sec_sequence.begin()))=eSecCommand(eSecCommand::SET_VOLTAGE, iDVBFrontend::voltage13);
// wait 1 second after first switch diseqc command
- sec_sequence.push_back( eSecCommand(eSecCommand::SLEEP, 1000) );
+ sec_sequence.push_back( eSecCommand(eSecCommand::SLEEP, 1000) );
}
else // no other diseqc commands before
{
sec_sequence.push_back( eSecCommand(eSecCommand::SET_TONE, iDVBFrontend::toneOff) );
- sec_sequence.push_back( eSecCommand(eSecCommand::SLEEP, 15) ); // wait 50msec after voltage change
+ sec_sequence.push_back( eSecCommand(eSecCommand::SLEEP, 15) ); // wait 15msec after tone change
eSecCommand::pair compare;
compare.voltage = voltage;
compare.steps = +3;
cmd.steps=+3;
cmd.okcount=0;
sec_sequence.push_back( eSecCommand(eSecCommand::IF_INPUTPOWER_DELTA_GOTO, cmd ) ); // check if rotor has started
- sec_sequence.push_back( eSecCommand(eSecCommand::IF_TIMEOUT_GOTO, +11 ) ); // timeout ?
+ sec_sequence.push_back( eSecCommand(eSecCommand::IF_TIMEOUT_GOTO, +10 ) ); // timeout .. we assume now the rotor is already at the correct position
sec_sequence.push_back( eSecCommand(eSecCommand::GOTO, -4) ); // goto loop start
////////////////////
sec_sequence.push_back( eSecCommand(eSecCommand::SET_TIMEOUT, 2400) ); // 2 minutes running timeout
cmd.direction=0; // check for stopped rotor
cmd.steps=+3;
sec_sequence.push_back( eSecCommand(eSecCommand::IF_INPUTPOWER_DELTA_GOTO, cmd ) );
- sec_sequence.push_back( eSecCommand(eSecCommand::IF_TIMEOUT_GOTO, +3 ) ); // timeout ?
+ sec_sequence.push_back( eSecCommand(eSecCommand::IF_TIMEOUT_GOTO, +3 ) ); // timeout ? this should never happen
sec_sequence.push_back( eSecCommand(eSecCommand::GOTO, -4) ); // running loop start
/////////////////////
sec_sequence.push_back( eSecCommand(eSecCommand::UPDATE_CURRENT_ROTORPARAMS) );
- frontend.setData(3, RotorCmd);
- frontend.setData(4, sat.orbital_position);
+ if ( linked )
+ {
+ frontend.setData(5, RotorCmd);
+ frontend.setData(6, sat.orbital_position);
+ }
+ else
+ {
+ frontend.setData(3, RotorCmd);
+ frontend.setData(4, sat.orbital_position);
+ }
}
else
eFatal("rotor turning without inputpowermeasure not implemented yet");
}
}
}
+ else
+ frontend.setData(0, band); // store band as csw .. needed for linked tuner handling
+
+ if ( linked )
+ return 0;
eSecCommand::pair compare;
compare.voltage = voltage;
}
}
- eDebug("not found satellite configuration for orbital position (%d)", sat.orbital_position );
+ if (linked)
+ return 0;
+ eDebug("found no satellite configuration for orbital position (%d)", sat.orbital_position );
return -1;
}
m_lnbs[i].tuner_mask = 0;
}
m_lnbidx=-1;
+
+// clear linked tuner configuration
+ for (eSmartPtrList<eDVBRegisteredFrontend>::iterator it(m_avail_frontends.begin()); it != m_avail_frontends.end(); ++it)
+ it->m_frontend->setData(7, -1);
+
return 0;
}
return 0;
}
+RESULT eDVBSatelliteEquipmentControl::setSeqRepeat(bool onoff)
+{
+ if ( currentLNBValid() )
+ m_lnbs[m_lnbidx].m_diseqc_parameters.m_seq_repeat = onoff;
+ else
+ return -ENOENT;
+ return 0;
+}
+
/* Rotor Specific Parameters */
RESULT eDVBSatelliteEquipmentControl::setLongitude(float longitude)
{
return -ENOENT;
return 0;
}
+
+RESULT eDVBSatelliteEquipmentControl::setTunerLinked(int tu1, int tu2)
+{
+ if (tu1 == tu2)
+ return -1;
+
+ eDVBFrontend *p1=NULL, *p2=NULL;
+ int tmp1=tu1, tmp2=tu2;
+
+ for (eSmartPtrList<eDVBRegisteredFrontend>::iterator it(m_avail_frontends.begin()); it != m_avail_frontends.end(); ++it)
+ {
+ if ( !tmp1 )
+ p1 = it->m_frontend;
+ else
+ --tmp1;
+ if (!tmp2)
+ p2 = it->m_frontend;
+ else
+ --tmp2;
+ }
+ if (p1 && p2)
+ {
+ p1->setData(7, tu2);
+ p1->setTone(iDVBFrontend::toneOff);
+ p1->setVoltage(iDVBFrontend::voltageOff);
+
+ p2->setData(7, tu1);
+ return 0;
+ }
+ return -1;
+}
git.cweiske.de / enigma2.git / blobdiff