parm.frequency = x[1]
parm.symbol_rate = x[2]
parm.polarisation = x[3] # eDVBFrontendParametersSatellite.Polarisation.Vertical
- #parm.fec = x[4] # eDVBFrontendParametersSatellite.FEC.f3_4;
- parm.fec = 6 # AUTO
+ parm.fec = x[4] # eDVBFrontendParametersSatellite.FEC.f3_4;
+ #parm.fec = 6 # AUTO
#parm.inversion = 1 #eDVBFrontendParametersSatellite.Inversion.Off;
parm.inversion = 2 #AUTO
parm.orbital_position = pos
self["config"] = ConfigList(self.list)
self.createSetup()
- self["introduction"] = Label("Press OK to start the scan")
+ self["introduction"] = Label(_("Press OK to start the scan"))
def updateSatList(self):
self.satList = []
for slot in nimmanager.nimslots:
- self.satList.append(nimmanager.getSatListForNim(slot.slotid))
-
+ if (nimmanager.getNimType(slot.slotid) == nimmanager.nimType["DVB-S"]):
+ self.satList.append(nimmanager.getSatListForNim(slot.slotid))
+ else:
+ self.satList.append(None)
+
def createSetup(self):
self.list = []
-
- self.list.append(getConfigListEntry("Type of scan", config.scan.type))
- self.list.append(getConfigListEntry("Tuner", config.scan.nims))
-
- # single transponder scan
- if (config.scan.type.value == 0):
- if (nimmanager.getNimType(config.scan.nims.value) == nimmanager.nimType["DVB-S"]):
- self.list.append(getConfigListEntry("Satellite", config.scan.satselection[config.scan.nims.value]))
- self.list.append(getConfigListEntry("Frequency", config.scan.sat.frequency))
- self.list.append(getConfigListEntry("Inversion", config.scan.sat.inversion))
- self.list.append(getConfigListEntry("Symbolrate", config.scan.sat.symbolrate))
- self.list.append(getConfigListEntry("Polarity", config.scan.sat.polarization))
- self.list.append(getConfigListEntry("FEC", config.scan.sat.fec))
- if (nimmanager.getNimType(config.scan.nims.value) == nimmanager.nimType["DVB-C"]):
- self.list.append(getConfigListEntry("Frequency", config.scan.cab.frequency))
- self.list.append(getConfigListEntry("Inversion", config.scan.cab.inversion))
- self.list.append(getConfigListEntry("Symbolrate", config.scan.cab.symbolrate))
- self.list.append(getConfigListEntry("Modulation", config.scan.cab.modulation))
- self.list.append(getConfigListEntry("FEC", config.scan.cab.fec))
- if (nimmanager.getNimType(config.scan.nims.value) == nimmanager.nimType["DVB-T"]):
- self.list.append(getConfigListEntry("Frequency", config.scan.ter.frequency))
- self.list.append(getConfigListEntry("Inversion", config.scan.ter.inversion))
- self.list.append(getConfigListEntry("Bandwidth", config.scan.ter.bandwidth))
- self.list.append(getConfigListEntry("Code rate high", config.scan.ter.fechigh))
- self.list.append(getConfigListEntry("Code rate low", config.scan.ter.feclow))
- self.list.append(getConfigListEntry("Modulation", config.scan.ter.modulation))
- self.list.append(getConfigListEntry("Transmission mode", config.scan.ter.transmission))
- self.list.append(getConfigListEntry("Guard interval mode", config.scan.ter.guard))
- self.list.append(getConfigListEntry("Hierarchy mode", config.scan.ter.hierarchy))
-
- # single satellite scan
- print config.scan.satselection
- if (config.scan.type.value == 1):
- self.updateSatList()
- print config.scan.satselection[config.scan.nims.value]
- self.list.append(getConfigListEntry("Satellite", config.scan.satselection[config.scan.nims.value]))
-
-
- # multi sat scan
- if (config.scan.type.value == 2):
- # if (norotor)
- tlist = []
- SatList = nimmanager.getSatListForNim(config.scan.nims.value)
-
- for x in SatList:
- if self.Satexists(tlist, x[1]) == 0:
- tlist.append(x[1])
- sat = configElement_nonSave(x[1], configSelection, 0, ("Enable", "Disable"))
- self.list.append(getConfigListEntry(nimmanager.getSatDescription(x[1]), sat))
-
- # if (rotor):
- # for sat in nimmanager.satList:
- # self.list.append(getConfigListEntry(sat[0], config.scan.scansat[sat[1]]))
+ self.multiscanlist = []
+ print "ID: " + str(config.scan.nims.value)
+
+ self.list.append(getConfigListEntry(_("Tuner"), config.scan.nims))
+
+ if (nimmanager.getNimType(config.scan.nims.value) == nimmanager.nimType["DVB-S"]):
+ self.list.append(getConfigListEntry(_("Type of scan"), config.scan.type))
+ elif (nimmanager.getNimType(config.scan.nims.value) == nimmanager.nimType["DVB-C"]):
+ self.list.append(getConfigListEntry(_("Type of scan"), config.scan.typecable))
+ elif (nimmanager.getNimType(config.scan.nims.value) == nimmanager.nimType["DVB-T"]):
+ self.list.append(getConfigListEntry(_("Type of scan"), config.scan.typeterrestrial))
+
+
+ if (nimmanager.getNimType(config.scan.nims.value) == nimmanager.nimType["DVB-S"]):
+ if (config.scan.type.value == 0): # single transponder scan
+ self.list.append(getConfigListEntry(_('Satellite'), config.scan.satselection[config.scan.nims.value]))
+ self.list.append(getConfigListEntry(_('Frequency'), config.scan.sat.frequency))
+ self.list.append(getConfigListEntry(_('Inversion'), config.scan.sat.inversion))
+ self.list.append(getConfigListEntry(_('Symbol Rate'), config.scan.sat.symbolrate))
+ self.list.append(getConfigListEntry(_("Polarity"), config.scan.sat.polarization))
+ self.list.append(getConfigListEntry(_("FEC"), config.scan.sat.fec))
+ if (config.scan.type.value == 1): # single satellite scan
+ self.updateSatList()
+ print config.scan.satselection[config.scan.nims.value]
+ self.list.append(getConfigListEntry(_("Satellite"), config.scan.satselection[config.scan.nims.value]))
+ if (config.scan.type.value == 2): # multi sat scan
+ # if (norotor)
+ tlist = []
+ SatList = nimmanager.getSatListForNim(config.scan.nims.value)
+
+ for x in SatList:
+ if self.Satexists(tlist, x[1]) == 0:
+ tlist.append(x[1])
+ sat = configElement_nonSave(x[1], configSelection, 0, (_("Enable"), _("Disable")))
+ configEntry = getConfigListEntry(nimmanager.getSatDescription(x[1]), sat)
+ self.list.append(configEntry)
+ self.multiscanlist.append(configEntry)
+ # if (rotor):
+ # for sat in nimmanager.satList:
+ # self.list.append(getConfigListEntry(sat[0], config.scan.scansat[sat[1]]))
+
+
+ if (nimmanager.getNimType(config.scan.nims.value) == nimmanager.nimType["DVB-C"]):
+ if (config.scan.typecable.value == 0): # single transponder
+ self.list.append(getConfigListEntry(_("Frequency"), config.scan.cab.frequency))
+ self.list.append(getConfigListEntry(_("Inversion"), config.scan.cab.inversion))
+ self.list.append(getConfigListEntry(_("Symbol Rate"), config.scan.cab.symbolrate))
+ self.list.append(getConfigListEntry(_("Modulation"), config.scan.cab.modulation))
+ self.list.append(getConfigListEntry(_("FEC"), config.scan.cab.fec))
+ if (config.scan.typecable.value == 1): # complete
+ pass
+
+ if (nimmanager.getNimType(config.scan.nims.value) == nimmanager.nimType["DVB-T"]):
+ if (config.scan.typeterrestrial.value == 0): # single transponder
+ self.list.append(getConfigListEntry(_("Frequency"), config.scan.ter.frequency))
+ self.list.append(getConfigListEntry(_("Inversion"), config.scan.ter.inversion))
+ self.list.append(getConfigListEntry(_("Bandwidth"), config.scan.ter.bandwidth))
+ self.list.append(getConfigListEntry(_("Code rate high"), config.scan.ter.fechigh))
+ self.list.append(getConfigListEntry(_("Code rate low"), config.scan.ter.feclow))
+ self.list.append(getConfigListEntry(_("Modulation"), config.scan.ter.modulation))
+ self.list.append(getConfigListEntry(_("Transmission mode"), config.scan.ter.transmission))
+ self.list.append(getConfigListEntry(_("Guard interval mode"), config.scan.ter.guard))
+ self.list.append(getConfigListEntry(_("Hierarchy mode"), config.scan.ter.hierarchy))
+ if (config.scan.typeterrestrial.value == 1): # complete
+ pass
self["config"].list = self.list
self["config"].l.setList(self.list)
def newConfig(self):
print self["config"].getCurrent()
- if self["config"].getCurrent()[0] == "Type of scan":
+ if self["config"].getCurrent()[0] == _("Type of scan"):
self.createSetup()
- if self["config"].getCurrent()[0] == "Tuner":
+ if self["config"].getCurrent()[0] == _("Tuner"):
self.createSetup()
def createConfig(self):
config.scan.ter = ConfigSubsection()
config.scan.type = configElement_nonSave("config.scan.type", configSelection, 0, ("Single transponder", "Single satellite", "Multisat"))
+ config.scan.typecable = configElement_nonSave("config.scan.typecable", configSelection, 0, ("Single transponder", "Complete"))
+ config.scan.typeterrestrial = configElement_nonSave("config.scan.typeterrestrial", configSelection, 0, ("Single transponder", "Complete"))
+
nimList = [ ]
for nim in nimmanager.nimList():
nimList.append(nim[0])
- nimList.append("all")
+ #nimList.append("all")
config.scan.nims = configElement_nonSave("config.scan.nims", configSelection, 0, nimList)
# sat
- config.scan.sat.frequency = configElement_nonSave("config.scan.sat.frequency", configSequence, [11836], configsequencearg.get("INTEGER", (10000, 14000)))
- config.scan.sat.inversion = configElement_nonSave("config.scan.sat.inversion", configSelection, 2, ("on", "off", "auto"))
- config.scan.sat.symbolrate = configElement_nonSave("config.scan.sat.symbolrate", configSequence, [27500], configsequencearg.get("INTEGER", (1, 30000)))
- config.scan.sat.polarization = configElement_nonSave("config.scan.sat.polarization", configSelection, 0, ("horizontal", "vertical", "circular left", "circular right"))
- config.scan.sat.fec = configElement_nonSave("config.scan.sat.fec", configSelection, 7, ("None", "1/2", "2/3", "3/4", "5/6", "7/8", "auto"))
-
+ config.scan.sat.frequency = configElement_nonSave("config.scan.sat.frequency", configSequence, [11836], configsequencearg.get("INTEGER", (1, 99999)))
+ config.scan.sat.inversion = configElement_nonSave("config.scan.sat.inversion", configSelection, 2, (_("off"), _("on"), _("Auto")))
+ config.scan.sat.symbolrate = configElement_nonSave("config.scan.sat.symbolrate", configSequence, [27500], configsequencearg.get("INTEGER", (1, 99999)))
+ config.scan.sat.polarization = configElement_nonSave("config.scan.sat.polarization", configSelection, 0, (_("horizontal"), _("vertical"), _("circular left"), _("circular right")))
+ config.scan.sat.fec = configElement_nonSave("config.scan.sat.fec", configSelection, 7, (_("Auto"), "1/2", "2/3", "3/4", "5/6", "7/8", _("None")))
# cable
- config.scan.cab.frequency = configElement_nonSave("config.scan.cab.frequency", configSequence, [466], configsequencearg.get("INTEGER", (10000, 14000)))
- config.scan.cab.inversion = configElement_nonSave("config.scan.cab.inversion", configSelection, 0, ("auto", "off", "on"))
- config.scan.cab.modulation = configElement_nonSave("config.scan.cab.modulation", configSelection, 0, ("Auto", "16-QAM", "32-QAM", "64-QAM", "128-QAM", "256-QAM"))
- config.scan.cab.fec = configElement_nonSave("config.scan.cab.fec", configSelection, 0, ("Auto", "1/2", "2/3", "3/4", "4/5", "5/6", "7/8", "8/9"))
- config.scan.cab.symbolrate = configElement_nonSave("config.scan.cab.symbolrate", configSequence, [6900], configsequencearg.get("INTEGER", (1, 30000)))
+ config.scan.cab.frequency = configElement_nonSave("config.scan.cab.frequency", configSequence, [466], configsequencearg.get("INTEGER", (50, 9999)))
+ config.scan.cab.inversion = configElement_nonSave("config.scan.cab.inversion", configSelection, 2, (_("off"), _("on"), _("Auto")))
+ config.scan.cab.modulation = configElement_nonSave("config.scan.cab.modulation", configSelection, 2, ("16-QAM", "32-QAM", "64-QAM", "128-QAM", "256-QAM", _("Auto")))
+ config.scan.cab.fec = configElement_nonSave("config.scan.cab.fec", configSelection, 9, (_("None"), "1/2", "2/3", "3/4", "4/5", "5/6", "6/7", "7/8", "8/9", _("Auto")))
+ config.scan.cab.symbolrate = configElement_nonSave("config.scan.cab.symbolrate", configSequence, [6900], configsequencearg.get("INTEGER", (1, 9999)))
# terrestial
- config.scan.ter.frequency = configElement_nonSave("config.scan.ter.frequency", configSequence, [466], configsequencearg.get("INTEGER", (10000, 14000)))
- config.scan.ter.inversion = configElement_nonSave("config.scan.ter.inversion", configSelection, 0, ("auto", "off", "on"))
- config.scan.ter.bandwidth = configElement_nonSave("config.scan.ter.bandwidth", configSelection, 0, ("Auto", "6 MHz", "7MHz", "8MHz"))
- config.scan.ter.fechigh = configElement_nonSave("config.scan.ter.fechigh", configSelection, 0, ("Auto", "1/2", "2/3", "3/4", "4/5", "5/6", "7/8", "8/9"))
- config.scan.ter.feclow = configElement_nonSave("config.scan.ter.feclow", configSelection, 0, ("Auto", "1/2", "2/3", "3/4", "4/5", "5/6", "7/8", "8/9"))
- config.scan.ter.modulation = configElement_nonSave("config.scan.ter.modulation", configSelection, 0, ("Auto", "16-QAM", "32-QAM", "64-QAM", "128-QAM", "256-QAM"))
- config.scan.ter.transmission = configElement_nonSave("config.scan.ter.transmission", configSelection, 0, ("Auto", "2K", "8K"))
- config.scan.ter.guard = configElement_nonSave("config.scan.ter.guard", configSelection, 0, ("Auto", "1/4", "1/8", "1/16", "1/32"))
- config.scan.ter.hierarchy = configElement_nonSave("config.scan.ter.hierarchy", configSelection, 0, ("Auto", "1", "2", "4"))
+ config.scan.ter.frequency = configElement_nonSave("config.scan.ter.frequency", configSequence, [466], configsequencearg.get("INTEGER", (100, 900)))
+ config.scan.ter.inversion = configElement_nonSave("config.scan.ter.inversion", configSelection, 2, (_("off"), _("on"), _("Auto")))
+ config.scan.ter.bandwidth = configElement_nonSave("config.scan.ter.bandwidth", configSelection, 3, ("8MHz", "7MHz", "6MHz", _("Auto")))
+ config.scan.ter.fechigh = configElement_nonSave("config.scan.ter.fechigh", configSelection, 6, (_("None"), "1/2", "2/3", "3/4", "5/6", "7/8", _("Auto")))
+ config.scan.ter.feclow = configElement_nonSave("config.scan.ter.feclow", configSelection, 6, (_("None"), "1/2", "2/3", "3/4", "5/6", "7/8", _("Auto")))
+ config.scan.ter.modulation = configElement_nonSave("config.scan.ter.modulation", configSelection, 2, ("QPSK", "QAM16", _("Auto")))
+ config.scan.ter.transmission = configElement_nonSave("config.scan.ter.transmission", configSelection, 2, ("2K", "8K", _("Auto")))
+ config.scan.ter.guard = configElement_nonSave("config.scan.ter.guard", configSelection, 4, ("1/32", "1/16", "1/8", "1/4", _("Auto")))
+ config.scan.ter.hierarchy = configElement_nonSave("config.scan.ter.hierarchy", configSelection, 4, (_("None"), "1", "2", "4", _("Auto")))
config.scan.scansat = {}
for sat in nimmanager.satList:
#print sat[1]
- config.scan.scansat[sat[1]] = configElement_nonSave("config.scan.scansat[" + str(sat[1]) + "]", configSelection, 0, ("yes", "no"))
+ config.scan.scansat[sat[1]] = configElement_nonSave("config.scan.scansat[" + str(sat[1]) + "]", configSelection, 0, (_("yes"), _("no")))
config.scan.satselection = []
slotid = 0
for slot in nimmanager.nimslots:
- config.scan.satselection.append(configElement_nonSave("config.scan.satselection[" + str(slot.slotid) + "]", configSatlist, 0, self.satList[slot.slotid]))
-
+ if (nimmanager.getNimType(slot.slotid) == nimmanager.nimType["DVB-S"]):
+ print str(slot.slotid) + " : " + str(self.satList)
+ config.scan.satselection.append(configElement_nonSave("config.scan.satselection[" + str(slot.slotid) + "]", configSatlist, 0, self.satList[slot.slotid]))
+ else:
+ config.scan.satselection.append(None)
def keyLeft(self):
self["config"].handleKey(config.key["prevElement"])
self.newConfig()
tlist.append(parm)
# FIXME use correct parameters
- def addCabTransponder(self, tlist, frequency, symbol_rate, polarisation, fec, inversion, orbital_position):
- print "Add Sat: frequ: " + str(frequency) + " symbol: " + str(symbol_rate) + " pol: " + str(polarisation) + " fec: " + str(fec) + " inversion: " + str(inversion)
- print "orbpos: " + str(orbital_position)
+ def addCabTransponder(self, tlist, frequency, symbol_rate, modulation, fec, inversion):
+ print "Add Sat: frequ: " + str(frequency) + " symbol: " + str(symbol_rate) + " pol: " + str(modulation) + " fec: " + str(fec) + " inversion: " + str(inversion)
parm = eDVBFrontendParametersCable()
parm.frequency = frequency * 1000
parm.symbol_rate = symbol_rate * 1000
- parm.polarisation = polarisation # eDVBFrontendParametersSatellite.Polarisation.Verti
+ parm.modulation = modulation # eDVBFrontendParametersSatellite.Polarisation.Verti
parm.fec = fec # eDVBFrontendParametersSatellite.FEC.f3_4;
#parm.fec = 6 # AUTO
parm.inversion = inversion #eDVBFrontendParametersSatellite.Inversion.Off;
#parm.inversion = 2 #AUTO
- parm.orbital_position = int(orbital_position)
tlist.append(parm)
# FIXME use correct parameters
- def addTerTransponder(self, tlist, frequency, symbol_rate, polarisation, fec, inversion, orbital_position):
- print "Add Sat: frequ: " + str(frequency) + " symbol: " + str(symbol_rate) + " pol: " + str(polarisation) + " fec: " + str(fec) + " inversion: " + str(inversion)
- print "orbpos: " + str(orbital_position)
+ def addTerTransponder(self, tlist, frequency):
parm = eDVBFrontendParametersTerrestrial()
- parm.frequency = frequency * 1000
- parm.symbol_rate = symbol_rate * 1000
- parm.polarisation = polarisation # eDVBFrontendParametersSatellite.Polarisation.Verti
- parm.fec = fec # eDVBFrontendParametersSatellite.FEC.f3_4;
- #parm.fec = 6 # AUTO
- parm.inversion = inversion #eDVBFrontendParametersSatellite.Inversion.Off;
- #parm.inversion = 2 #AUTO
- parm.orbital_position = int(orbital_position)
+
+ parm.frequency = frequency * 1000000
+ parm.inversion = 2 # eDVBFrontendParametersTerrestrial.Inversion.Unknown;
+ parm.bandwidth = 0 #eDVBFrontendParametersTerrestrial.Bandwidth.Bw8MHz;
+ parm.code_rate_HP = parm.code_rate_LP = 6 #eDVBFrontendParametersTerrestrial.FEC.fAuto;
+ parm.modulation = 1 #eDVBFrontendParametersTerrestrial.Modulation.QAM16;
+ parm.transmission_mode = 1 # eDVBFrontendParametersTerrestrial.TransmissionMode.TM8k;
+ parm.guard_interval = 0 # eDVBFrontendParametersTerrestrial.GuardInterval.GI_1_32;
+ parm.hierarchy = 0 #eDVBFrontendParametersTerrestrial.Hierarchy.HNone;
tlist.append(parm)
def keyGo(self):
tlist = []
+ flags = 0
if (config.scan.type.value == 0): # single transponder scan
if (nimmanager.getNimType(config.scan.nims.value) == nimmanager.nimType["DVB-S"]):
self.addSatTransponder(tlist, config.scan.sat.frequency.value[0],
if (nimmanager.getNimType(config.scan.nims.value) == nimmanager.nimType["DVB-C"]):
self.addCabTransponder(tlist, config.scan.cab.frequency.value[0],
config.scan.cab.symbolrate.value[0],
- config.scan.cab.polarization.value,
+ config.scan.cab.modulation.value,
config.scan.cab.fec.value,
- config.scan.cab.inversion.value,
- self.satList[config.scan.nims.value][config.scan.satselection[config.scan.nims.value].value][1])
+ config.scan.cab.inversion.value)
if (nimmanager.getNimType(config.scan.nims.value) == nimmanager.nimType["DVB-T"]):
- self.addTerTransponder(tlist, config.scan.sat.frequency.value[0],
- config.scan.sat.symbolrate.value[0],
- config.scan.sat.polarization.value,
- config.scan.sat.fec.value,
- config.scan.sat.inversion.value,
- self.satList[config.scan.nims.value][config.scan.satselection[config.scan.nims.value].value][1])
+ self.addTerTransponder(tlist,
+ config.scan.ter.frequency.value[0])
- if (config.scan.type.value == 1):
+ if (config.scan.type.value == 1): # single sat scan
getInitialTransponderList(tlist, int(self.satList[config.scan.nims.value][config.scan.satselection[config.scan.nims.value].value][1]))
+ flags |= eComponentScan.scanNetworkSearch
if (config.scan.type.value == 2): # multi sat scan
SatList = nimmanager.getSatListForNim(config.scan.nims.value)
- for x in self.list:
+ for x in self.multiscanlist:
if x[1].parent.value == 0:
print " " + str(x[1].parent.configPath)
getInitialTransponderList(tlist, x[1].parent.configPath)
-
+ flags |= eComponentScan.scanNetworkSearch
for x in self["config"].list:
x[1].save()
- flags = 0
- flags |= eComponentScan.scanNetworkSearch
+ feid = config.scan.nims.value
# flags |= eComponentScan.scanSearchBAT
- self.session.openWithCallback(self.keyCancel, ServiceScan, tlist, flags)
+ self.session.openWithCallback(self.doNothing, ServiceScan, tlist, feid, flags)
#self.close()
+ def doNothing(self):
+ pass
def keyCancel(self):
for x in self["config"].list:
class ScanSimple(Screen):
- def keyOK(self):
+ def run(self):
print "start scan for sats:"
tlist = [ ]
for x in self.list:
print " " + str(x[1].parent.configPath)
getInitialTransponderList(tlist, x[1].parent.configPath)
- self.session.openWithCallback(self.keyCancel, ServiceScan, tlist, eComponentScan.scanNetworkSearch)
+ feid = 0 # FIXME
+ self.session.openWithCallback(self.doNothing, ServiceScan, tlist, feid, eComponentScan.scanNetworkSearch)
+
+ def keyGo(self):
+ print "start scan for sats:"
+ tlist = [ ]
+ for x in self.list:
+ if x[1].parent.value == 0:
+ print " " + str(x[1].parent.configPath)
+ getInitialTransponderList(tlist, x[1].parent.configPath)
+
+ feid = 0 # FIXME
+ self.session.openWithCallback(self.doNothing, ServiceScan, tlist, feid, eComponentScan.scanNetworkSearch)
+
+ def doNothing(self):
+ pass
+
def keyCancel(self):
self.close()
self["actions"] = ActionMap(["SetupActions"],
{
- "ok": self.keyOK,
+ "ok": self.keyGo,
"cancel": self.keyCancel,
"left": self.keyLeft,
"right": self.keyRight,
self.list = []
tlist = []
- SatList = nimmanager.getConfiguredSats()
- for x in SatList:
- if self.Satexists(tlist, x) == 0:
- tlist.append(x)
- sat = configElement_nonSave(x, configSelection, 0, ("Enable", "Disable"))
- self.list.append(getConfigListEntry(nimmanager.getSatDescription(x), sat))
+ for slotid in nimmanager.getNimListOfType(nimmanager.nimType["DVB-S"]):
+ SatList = nimmanager.getSatListForNim(slotid)
+
+ for x in SatList:
+ if self.Satexists(tlist, x[1]) == 0:
+ tlist.append(x[1])
+ sat = configElement_nonSave(x[1], configSelection, 0, (_("Enable"), _("Disable")))
+ self.list.append(getConfigListEntry(nimmanager.getSatDescription(x[1]), sat))
self["config"] = ConfigList(self.list)
- self["header"] = Label("Automatic Scan")
- self["footer"] = Label("Press OK to scan")
+ self["header"] = Label(_("Automatic Scan"))
+ self["footer"] = Label(_("Press OK to scan"))
git.cweiske.de / enigma2.git / blobdiff