if ( fec != FEC::fNone && fec > FEC::f9_10 )
fec = FEC::fAuto;
inversion = Inversion::Unknown;
+ pilot = Pilot::Unknown;
orbital_position = ((descriptor.getOrbitalPosition() >> 12) & 0xF) * 1000;
orbital_position += ((descriptor.getOrbitalPosition() >> 8) & 0xF) * 100;
orbital_position += ((descriptor.getOrbitalPosition() >> 4) & 0xF) * 10;
eDebug("satellite_delivery_descriptor non valid modulation type.. force QPSK");
modulation=QPSK;
}
- roll_off = descriptor.getRollOff();
+ rolloff = descriptor.getRollOff();
if (system == System::DVB_S2)
{
- eDebug("SAT DVB-S2 freq %d, %s, pos %d, sr %d, fec %d, modulation %d, roll_off %d",
+ eDebug("SAT DVB-S2 freq %d, %s, pos %d, sr %d, fec %d, modulation %d, rolloff %d",
frequency,
polarisation ? "hor" : "vert",
orbital_position,
symbol_rate, fec,
modulation,
- roll_off);
+ rolloff);
}
else
{
}
case iDVBFrontend::feCable:
hash = 0xFFFF0000;
+ hash |= (cable.frequency/1000)&0xFFFF;
return 0;
case iDVBFrontend::feTerrestrial:
hash = 0xEEEE0000;
+ hash |= (terrestrial.frequency/1000)&0xFFFF;
+ return 0;
+ default:
+ return -1;
+ }
+}
+
+RESULT eDVBFrontendParameters::calcLockTimeout(unsigned int &timeout) const
+{
+ switch (m_type)
+ {
+ case iDVBFrontend::feSatellite:
+ {
+ /* high symbol rate transponders tune faster, due to
+ requiring less zigzag and giving more symbols faster.
+
+ 5s are definitely not enough on really low SR when
+ zigzag has to find the exact frequency first.
+ */
+ if (sat.symbol_rate > 20000000)
+ timeout = 5000;
+ else if (sat.symbol_rate > 10000000)
+ timeout = 10000;
+ else
+ timeout = 20000;
+ return 0;
+ }
+ case iDVBFrontend::feCable:
+ timeout = 5000;
+ return 0;
+ case iDVBFrontend::feTerrestrial:
+ timeout = 5000;
return 0;
default:
return -1;
m_dvbid, linked_fe->m_frontend->getDVBID(), linked_fe->m_frontend->getSlotID());
return -1;
}
- linked_fe->m_frontend->getData(LINKED_NEXT_PTR, (int&)linked_fe);
+ linked_fe->m_frontend->getData(LINKED_NEXT_PTR, (long&)linked_fe);
}
if (m_fd >= 0)
{
eDebug("FE_READ_BER failed (%m)");
return ber;
}
- case signalPower:
+ case signalQuality:
{
uint16_t snr=0;
if (ioctl(m_fd, FE_READ_SNR, &snr) < 0 && errno != ERANGE)
eDebug("FE_READ_SNR failed (%m)");
return snr;
}
- case signalPowerdB: /* this will move into the driver */
+ case signalQualitydB: /* this will move into the driver */
{
uint16_t snr=0;
if (ioctl(m_fd, FE_READ_SNR, &snr) < 0 && errno != ERANGE)
{
float snr_in_db=(snr-39075)/1764.7;
return (int)(snr_in_db * 100.0);
- }
- else
- eDebug("no SNR dB caluclation for frontendtype %s yet", m_description);
+ } else if (!strcmp(m_description, "Alps BSBE2"))
+ {
+ return (int)((snr >> 7) * 10.0);
+ } /* else
+ eDebug("no SNR dB calculation for frontendtype %s yet", m_description); */
return 0x12345678;
}
- case signalQuality:
+ case signalPower:
{
uint16_t strength=0;
if (ioctl(m_fd, FE_READ_SIGNAL_STRENGTH, &strength) < 0 && errno != ERANGE)
void fillDictWithSatelliteData(ePyObject dict, const FRONTENDPARAMETERS &parm, eDVBFrontend *fe)
{
- int freq_offset=0;
- int csw=0;
+ long freq_offset=0;
+ long csw=0;
const char *tmp=0;
fe->getData(eDVBFrontend::CSW, csw);
fe->getData(eDVBFrontend::FREQ_OFFSET, freq_offset);
break;
#endif
}
+ PutToDict(dict, "fec_inner", tmp);
#if HAVE_DVB_API_VERSION >=3
PutToDict(dict, "modulation",
parm_u_qpsk_fec_inner > FEC_S2_QPSK_9_10 ? "8PSK": "QPSK" );
+ if (parm_u_qpsk_fec_inner > FEC_AUTO)
+ {
+ switch(parm_inversion & 0xc)
+ {
+ default: // unknown rolloff
+ case 0: // 0.35
+ tmp = "ROLLOFF_0_35";
+ break;
+ case 4: // 0.25
+ tmp = "ROLLOFF_0_25";
+ break;
+ case 8: // 0.20
+ tmp = "ROLLOFF_0_20";
+ break;
+ }
+ PutToDict(dict, "rolloff", tmp);
+ if (parm_u_qpsk_fec_inner > FEC_S2_QPSK_9_10)
+ {
+ switch(parm_inversion & 0x30)
+ {
+ case 0: // pilot off
+ tmp = "PILOT_OFF";
+ break;
+ case 0x10: // pilot on
+ tmp = "PILOT_ON";
+ break;
+ case 0x20: // pilot auto
+ tmp = "PILOT_AUTO";
+ break;
+ }
+ PutToDict(dict, "pilot", tmp);
+ }
+ tmp = "DVB-S2";
+ }
+ else
+ tmp = "DVB-S";
#else
PutToDict(dict, "modulation", "QPSK" );
+ tmp = "DVB-S";
#endif
- PutToDict(dict, "fec_inner", tmp);
- tmp = parm_u_qpsk_fec_inner > FEC_AUTO ?
- "DVB-S2" : "DVB-S";
PutToDict(dict, "system", tmp);
}
void fillDictWithCableData(ePyObject dict, const FRONTENDPARAMETERS &parm)
{
const char *tmp=0;
+#if HAVE_DVB_API_VERSION < 3
+ PutToDict(dict, "frequency", parm_frequency);
+#else
PutToDict(dict, "frequency", parm_frequency/1000);
+#endif
PutToDict(dict, "symbol_rate", parm_u_qam_symbol_rate);
switch(parm_u_qam_fec_inner)
{
PutToDict(dest, "tuner_locked", readFrontendData(locked));
PutToDict(dest, "tuner_synced", readFrontendData(synced));
PutToDict(dest, "tuner_bit_error_rate", readFrontendData(bitErrorRate));
- PutToDict(dest, "tuner_signal_power", readFrontendData(signalPower));
- int sigPowerdB = readFrontendData(signalPowerdB);
- if (sigPowerdB == 0x12345678) // not support yet
+ PutToDict(dest, "tuner_signal_quality", readFrontendData(signalQuality));
+ int sigQualitydB = readFrontendData(signalQualitydB);
+ if (sigQualitydB == 0x12345678) // not support yet
{
ePyObject obj=Py_None;
Py_INCREF(obj);
- PutToDict(dest, "tuner_signal_power_db", obj);
+ PutToDict(dest, "tuner_signal_quality_db", obj);
}
else
- PutToDict(dest, "tuner_signal_power_db", sigPowerdB);
- PutToDict(dest, "tuner_signal_quality", readFrontendData(signalQuality));
+ PutToDict(dest, "tuner_signal_quality_db", sigQualitydB);
+ PutToDict(dest, "tuner_signal_power", readFrontendData(signalPower));
}
}
int eDVBFrontend::readInputpower()
{
int power=m_slotid; // this is needed for read inputpower from the correct tuner !
-
- // open front prozessor
- int fp=::open("/dev/dbox/fp0", O_RDWR);
- if (fp < 0)
+ char proc_name[64];
+ sprintf(proc_name, "/proc/stb/fp/lnb_sense%d", m_slotid);
+ FILE *f=fopen(proc_name, "r");
+ if (f)
{
- eDebug("couldn't open fp");
- return -1;
+ if (fscanf(f, "%08x", &power) != 1)
+ eDebug("read %s failed!! (%m)", proc_name);
+ else
+ eDebug("%s is %d\n", proc_name, power);
+ fclose(f);
}
- static bool old_fp = (::ioctl(fp, FP_IOCTL_GET_ID) < 0);
- if ( ioctl( fp, old_fp ? 9 : 0x100, &power ) < 0 )
+ else
{
- eDebug("FP_IOCTL_GET_LNB_CURRENT failed (%m)");
- return -1;
+ // open front prozessor
+ int fp=::open("/dev/dbox/fp0", O_RDWR);
+ if (fp < 0)
+ {
+ eDebug("couldn't open fp");
+ return -1;
+ }
+ static bool old_fp = (::ioctl(fp, FP_IOCTL_GET_ID) < 0);
+ if ( ioctl( fp, old_fp ? 9 : 0x100, &power ) < 0 )
+ {
+ eDebug("FP_IOCTL_GET_LNB_CURRENT failed (%m)");
+ return -1;
+ }
+ ::close(fp);
}
- ::close(fp);
return power;
}
else
{
eDVBRegisteredFrontend *next = (eDVBRegisteredFrontend *)m_data[LINKED_NEXT_PTR];
- while ( (int)next != -1 )
+ while ( (long)next != -1 )
{
next->m_frontend->m_data[ROTOR_CMD] = cmd;
next->m_frontend->m_data[ROTOR_POS] = pos;
next = (eDVBRegisteredFrontend *)next->m_frontend->m_data[LINKED_NEXT_PTR];
}
eDVBRegisteredFrontend *prev = (eDVBRegisteredFrontend *)m_data[LINKED_PREV_PTR];
- while ( (int)prev != -1 )
+ while ( (long)prev != -1 )
{
prev->m_frontend->m_data[ROTOR_CMD] = cmd;
prev->m_frontend->m_data[ROTOR_POS] = pos;
++m_sec_sequence.current();
break;
case eSecCommand::START_TUNE_TIMEOUT:
- m_timeout->start(5000, 1); // 5 sec timeout. TODO: symbolrate dependent
+ {
+ m_timeout->start(m_sec_sequence.current()->timeout, 1);
++m_sec_sequence.current();
break;
+ }
case eSecCommand::SET_TIMEOUT:
m_timeoutCount = m_sec_sequence.current()++->val;
eDebug("[SEC] set timeout %d", m_timeoutCount);
break;
case eSecCommand::UPDATE_CURRENT_ROTORPARAMS:
setRotorData(m_data[NEW_ROTOR_POS], m_data[NEW_ROTOR_CMD]);
- eDebug("[SEC] update current rotorparams %d %04x %d", m_timeoutCount, m_data[ROTOR_CMD], m_data[ROTOR_POS]);
+ eDebug("[SEC] update current rotorparams %d %04lx %ld", m_timeoutCount, m_data[ROTOR_CMD], m_data[ROTOR_POS]);
++m_sec_sequence.current();
break;
case eSecCommand::SET_ROTOR_DISEQC_RETRYS:
break;
case eSecCommand::SET_POWER_LIMITING_MODE:
{
- if (!m_need_rotor_workaround)
- break;
-
- char dev[16];
-
- // FIXMEEEEEE hardcoded i2c devices for dm7025 and dm8000
- if (m_slotid < 2)
- sprintf(dev, "/dev/i2c/%d", m_slotid);
- else if (m_slotid == 2)
- sprintf(dev, "/dev/i2c/2"); // first nim socket on DM8000 use /dev/i2c/2
- else if (m_slotid == 3)
- sprintf(dev, "/dev/i2c/4"); // second nim socket on DM8000 use /dev/i2c/4
- int fd = ::open(dev, O_RDWR);
-
- unsigned char data[2];
- ::ioctl(fd, I2C_SLAVE_FORCE, 0x10 >> 1);
- if(::read(fd, data, 1) != 1)
- eDebug("[SEC] error read lnbp (%m)");
- if ( m_sec_sequence.current()->mode == eSecCommand::modeStatic )
+ if (m_need_rotor_workaround)
{
- data[0] |= 0x80; // enable static current limiting
- eDebug("[SEC] set static current limiting");
- }
- else
- {
- data[0] &= ~0x80; // enable dynamic current limiting
- eDebug("[SEC] set dynamic current limiting");
+ char dev[16];
+
+ // FIXMEEEEEE hardcoded i2c devices for dm7025 and dm8000
+ if (m_slotid < 2)
+ sprintf(dev, "/dev/i2c/%d", m_slotid);
+ else if (m_slotid == 2)
+ sprintf(dev, "/dev/i2c/2"); // first nim socket on DM8000 use /dev/i2c/2
+ else if (m_slotid == 3)
+ sprintf(dev, "/dev/i2c/4"); // second nim socket on DM8000 use /dev/i2c/4
+ int fd = ::open(dev, O_RDWR);
+
+ unsigned char data[2];
+ ::ioctl(fd, I2C_SLAVE_FORCE, 0x10 >> 1);
+ if(::read(fd, data, 1) != 1)
+ eDebug("[SEC] error read lnbp (%m)");
+ if ( m_sec_sequence.current()->mode == eSecCommand::modeStatic )
+ {
+ data[0] |= 0x80; // enable static current limiting
+ eDebug("[SEC] set static current limiting");
+ }
+ else
+ {
+ data[0] &= ~0x80; // enable dynamic current limiting
+ eDebug("[SEC] set dynamic current limiting");
+ }
+ if(::write(fd, data, 1) != 1)
+ eDebug("[SEC] error write lnbp (%m)");
+ ::close(fd);
}
- if(::write(fd, data, 1) != 1)
- eDebug("[SEC] error write lnbp (%m)");
- ::close(fd);
++m_sec_sequence.current();
break;
}
return 0;
}
-RESULT eDVBFrontend::prepare_sat(const eDVBFrontendParametersSatellite &feparm)
+RESULT eDVBFrontend::prepare_sat(const eDVBFrontendParametersSatellite &feparm, unsigned int tunetimeout)
{
int res;
if (!m_sec)
eWarning("no SEC module active!");
return -ENOENT;
}
- res = m_sec->prepare(*this, parm, feparm, 1 << m_slotid);
+ res = m_sec->prepare(*this, parm, feparm, 1 << m_slotid, tunetimeout);
if (!res)
{
eDebug("prepare_sat System %d Freq %d Pol %d SR %d INV %d FEC %d orbpos %d",
eDebug("no valid fec for DVB-S2 set.. abort !!");
return -EINVAL;
}
- if (feparm.modulation == eDVBFrontendParametersSatellite::Modulation::M8PSK)
+ parm_inversion |= (feparm.rolloff << 2); // Hack.. we use bit 2..3 of inversion param for rolloff
+ if (feparm.modulation == eDVBFrontendParametersSatellite::Modulation::M8PSK) {
parm_u_qpsk_fec_inner = (fe_code_rate_t)((int)parm_u_qpsk_fec_inner+9);
// 8PSK fec driver values are decimal 9 bigger
+ parm_inversion |= (feparm.pilot << 4); // Hack.. we use bit 4..5 of inversion param for pilot
+ }
}
#endif
// FIXME !!! get frequency range from tuner
RESULT eDVBFrontend::prepare_cable(const eDVBFrontendParametersCable &feparm)
{
+#if HAVE_DVB_API_VERSION < 3
+ parm_frequency = feparm.frequency;
+#else
parm_frequency = feparm.frequency * 1000;
+#endif
parm_u_qam_symbol_rate = feparm.symbol_rate;
switch (feparm.modulation)
{
RESULT eDVBFrontend::tune(const iDVBFrontendParameters &where)
{
+ unsigned int timeout = 5000;
eDebug("(%d)tune", m_dvbid);
m_timeout->stop();
m_sn->stop();
m_sec_sequence.clear();
+ where.calcLockTimeout(timeout);
+
switch (m_type)
{
case feSatellite:
goto tune_error;
}
m_sec->setRotorMoving(false);
- res=prepare_sat(feparm);
+ res=prepare_sat(feparm, timeout);
if (res)
goto tune_error;
if (res)
goto tune_error;
- m_sec_sequence.push_back( eSecCommand(eSecCommand::START_TUNE_TIMEOUT) );
+ m_sec_sequence.push_back( eSecCommand(eSecCommand::START_TUNE_TIMEOUT, timeout) );
m_sec_sequence.push_back( eSecCommand(eSecCommand::SET_FRONTEND) );
break;
}
std::string enable_5V;
char configStr[255];
snprintf(configStr, 255, "config.Nims.%d.terrestrial_5V", m_slotid);
- m_sec_sequence.push_back( eSecCommand(eSecCommand::START_TUNE_TIMEOUT) );
+ m_sec_sequence.push_back( eSecCommand(eSecCommand::START_TUNE_TIMEOUT, timeout) );
ePythonConfigQuery::getConfigValue(configStr, enable_5V);
if (enable_5V == "True")
m_sec_sequence.push_back( eSecCommand(eSecCommand::SET_VOLTAGE, iDVBFrontend::voltage13) );
return 0;
}
-RESULT eDVBFrontend::getData(int num, int &data)
+RESULT eDVBFrontend::getData(int num, long &data)
{
if ( num < NUM_DATA_ENTRIES )
{
return -EINVAL;
}
-RESULT eDVBFrontend::setData(int num, int val)
+RESULT eDVBFrontend::setData(int num, long val)
{
if ( num < NUM_DATA_ENTRIES )
{