from Components.config import getConfigListEntry
from Components.NimManager import nimmanager
from Components.Label import Label
+from enigma import eDVBFrontendParametersSatellite, eComponentScan
+
+def getInitialTransponderList(tlist, pos):
+ print pos
+ list = nimmanager.getTransponders(pos)
+
+ for x in list:
+ if x[0] == 0: #SAT
+ parm = eDVBFrontendParametersSatellite()
+ parm.frequency = x[1]
+ parm.symbol_rate = x[2]
+ parm.polarisation = x[3] # eDVBFrontendParametersSatellite.Polarisation.Vertical
+ #parm.fec = x[4] # eDVBFrontendParametersSatellite.FEC.f3_4;
+ parm.fec = 6 # AUTO
+ #parm.inversion = 1 #eDVBFrontendParametersSatellite.Inversion.Off;
+ parm.inversion = 2 #AUTO
+ parm.orbital_position = pos
+ tlist.append(parm)
class ScanSetup(Screen):
- def __init__(self, session):
- Screen.__init__(self, session)
-
- self.updateSatList()
- self.createConfig()
-
-
- self["actions"] = NumberActionMap(["SetupActions"],
- {
- "ok": self.keyGo,
- "cancel": self.keyCancel,
- "left": self.keyLeft,
- "right": self.keyRight,
- "1": self.keyNumberGlobal,
- "2": self.keyNumberGlobal,
- "3": self.keyNumberGlobal,
- "4": self.keyNumberGlobal,
- "5": self.keyNumberGlobal,
- "6": self.keyNumberGlobal,
- "7": self.keyNumberGlobal,
- "8": self.keyNumberGlobal,
- "9": self.keyNumberGlobal,
- "0": self.keyNumberGlobal
- }, -1)
-
- self.list = []
- self["config"] = ConfigList(self.list)
- self.createSetup()
-
- self["introduction"] = Label("Press OK to start the scan")
-
- def updateSatList(self):
- self.satList = []
- for slot in nimmanager.nimslots:
- self.satList.append(nimmanager.getSatListForNim(slot.slotid))
-
- def createSetup(self):
- self.list = []
-
- self.list.append(getConfigListEntry("Type of scan", config.scan.type))
- self.list.append(getConfigListEntry("Tuner", config.scan.nims))
-
- # single transponder scan
- if (config.scan.type.value == 0):
- if (nimmanager.getNimType(config.scan.nims.value) == nimmanager.nimType["DVB-S"]):
- self.list.append(getConfigListEntry("Frequency", config.scan.sat.frequency))
- self.list.append(getConfigListEntry("Inversion", config.scan.sat.inversion))
- self.list.append(getConfigListEntry("Symbolrate", config.scan.sat.symbolrate))
- self.list.append(getConfigListEntry("Polarity", config.scan.sat.polarzation))
- self.list.append(getConfigListEntry("FEC", config.scan.sat.fec))
- if (nimmanager.getNimType(config.scan.nims.value) == nimmanager.nimType["DVB-C"]):
- self.list.append(getConfigListEntry("Frequency", config.scan.cab.frequency))
- self.list.append(getConfigListEntry("Inversion", config.scan.cab.inversion))
- self.list.append(getConfigListEntry("Symbolrate", config.scan.cab.symbolrate))
- self.list.append(getConfigListEntry("Modulation", config.scan.cab.modulation))
- self.list.append(getConfigListEntry("FEC", config.scan.cab.fec))
- if (nimmanager.getNimType(config.scan.nims.value) == nimmanager.nimType["DVB-T"]):
- self.list.append(getConfigListEntry("Frequency", config.scan.ter.frequency))
- self.list.append(getConfigListEntry("Inversion", config.scan.ter.inversion))
- self.list.append(getConfigListEntry("Bandwidth", config.scan.ter.bandwidth))
- self.list.append(getConfigListEntry("Code rate high", config.scan.ter.fechigh))
- self.list.append(getConfigListEntry("Code rate low", config.scan.ter.feclow))
- self.list.append(getConfigListEntry("Modulation", config.scan.ter.modulation))
- self.list.append(getConfigListEntry("Transmission mode", config.scan.ter.transmission))
- self.list.append(getConfigListEntry("Guard interval mode", config.scan.ter.guard))
- self.list.append(getConfigListEntry("Hierarchy mode", config.scan.ter.hierarchy))
-
- # single satellite scan
- print config.scan.satselection
- if (config.scan.type.value == 1):
- self.updateSatList()
- print config.scan.satselection[config.scan.nims.value]
- self.list.append(getConfigListEntry("Satellite", config.scan.satselection[config.scan.nims.value]))
-
-
- # multi sat scan
- if (config.scan.type.value == 2):
- # if (norotor)
- tlist = []
- SatList = nimmanager.getSatListForNim(config.scan.nims.value)
-
- for x in SatList:
- if self.Satexists(tlist, x[1]) == 0:
- tlist.append(x[1])
- sat = configElement_nonSave(x[1], configSelection, 0, ("Enable", "Disable"))
- self.list.append(getConfigListEntry(nimmanager.getSatDescription(x[1]), sat))
-
- # if (rotor):
- # for sat in nimmanager.satList:
- # self.list.append(getConfigListEntry(sat[0], config.scan.scansat[sat[1]]))
-
- self["config"].list = self.list
- self["config"].l.setList(self.list)
-
- def Satexists(self, tlist, pos):
- for x in tlist:
- if x == pos:
- return 1
- return 0
-
- def newConfig(self):
- print self["config"].getCurrent()
- if self["config"].getCurrent()[0] == "Type of scan":
- self.createSetup()
- if self["config"].getCurrent()[0] == "Tuner":
- self.createSetup()
-
- def createConfig(self):
- config.scan = ConfigSubsection()
- config.scan.sat = ConfigSubsection()
- config.scan.cab = ConfigSubsection()
- config.scan.ter = ConfigSubsection()
-
- config.scan.type = configElement_nonSave("config.scan.type", configSelection, 0, ("Single transponder", "Single satellite", "Multisat"))
- nimList = [ ]
- for nim in nimmanager.nimList():
- nimList.append(nim[0])
- nimList.append("all")
- config.scan.nims = configElement_nonSave("config.scan.nims", configSelection, 0, nimList)
-
- # sat
- config.scan.sat.frequency = configElement_nonSave("config.scan.sat.frequency", configSequence, [12187], configsequencearg.get("INTEGER", (10000, 14000)))
- config.scan.sat.inversion = configElement_nonSave("config.scan.sat.inversion", configSelection, 0, ("off", "on"))
- config.scan.sat.symbolrate = configElement_nonSave("config.scan.sat.symbolrate", configSequence, [27500], configsequencearg.get("INTEGER", (1, 30000)))
- config.scan.sat.polarzation = configElement_nonSave("config.scan.sat.polarzation", configSelection, 0, ("horizontal", "vertical"))
- config.scan.sat.fec = configElement_nonSave("config.scan.sat.fec", configSelection, 0, ("Auto", "1/2", "2/3", "3/4", "4/5", "5/6", "7/8", "8/9"))
-
- # cable
- config.scan.cab.frequency = configElement_nonSave("config.scan.cab.frequency", configSequence, [466], configsequencearg.get("INTEGER", (10000, 14000)))
- config.scan.cab.inversion = configElement_nonSave("config.scan.cab.inversion", configSelection, 0, ("off", "on"))
- config.scan.cab.modulation = configElement_nonSave("config.scan.cab.modulation", configSelection, 0, ("Auto", "16-QAM", "32-QAM", "64-QAM", "128-QAM", "256-QAM"))
- config.scan.cab.fec = configElement_nonSave("config.scan.cab.fec", configSelection, 0, ("Auto", "1/2", "2/3", "3/4", "4/5", "5/6", "7/8", "8/9"))
- config.scan.cab.symbolrate = configElement_nonSave("config.scan.cab.symbolrate", configSequence, [6900], configsequencearg.get("INTEGER", (1, 30000)))
-
- # terrestial
- config.scan.ter.frequency = configElement_nonSave("config.scan.ter.frequency", configSequence, [466], configsequencearg.get("INTEGER", (10000, 14000)))
- config.scan.ter.inversion = configElement_nonSave("config.scan.ter.inversion", configSelection, 0, ("off", "on"))
- config.scan.ter.bandwidth = configElement_nonSave("config.scan.ter.bandwidth", configSelection, 0, ("Auto", "6 MHz", "7MHz", "8MHz"))
- config.scan.ter.fechigh = configElement_nonSave("config.scan.ter.fechigh", configSelection, 0, ("Auto", "1/2", "2/3", "3/4", "4/5", "5/6", "7/8", "8/9"))
- config.scan.ter.feclow = configElement_nonSave("config.scan.ter.feclow", configSelection, 0, ("Auto", "1/2", "2/3", "3/4", "4/5", "5/6", "7/8", "8/9"))
- config.scan.ter.modulation = configElement_nonSave("config.scan.ter.modulation", configSelection, 0, ("Auto", "16-QAM", "32-QAM", "64-QAM", "128-QAM", "256-QAM"))
- config.scan.ter.transmission = configElement_nonSave("config.scan.ter.transmission", configSelection, 0, ("Auto", "2K", "8K"))
- config.scan.ter.guard = configElement_nonSave("config.scan.ter.guard", configSelection, 0, ("Auto", "1/4", "1/8", "1/16", "1/32"))
- config.scan.ter.hierarchy = configElement_nonSave("config.scan.ter.hierarchy", configSelection, 0, ("Auto", "1", "2", "4"))
-
- config.scan.scansat = {}
- for sat in nimmanager.satList:
- #print sat[1]
- config.scan.scansat[sat[1]] = configElement_nonSave("config.scan.scansat[" + str(sat[1]) + "]", configSelection, 0, ("yes", "no"))
-
- config.scan.satselection = []
- slotid = 0
- for slot in nimmanager.nimslots:
- config.scan.satselection.append(configElement_nonSave("config.scan.satselection[" + str(slot.slotid) + "]", configSatlist, 0, self.satList[slot.slotid]))
-
- def keyLeft(self):
- self["config"].handleKey(config.key["prevElement"])
- self.newConfig()
-
- def keyRight(self):
- self["config"].handleKey(config.key["nextElement"])
- self.newConfig()
-
- def keyNumberGlobal(self, number):
- print "You pressed number " + str(number)
- if (self["config"].getCurrent()[1].parent.enabled == True):
- self["config"].handleKey(config.key[str(number)])
-
- def keyGo(self):
- for x in self["config"].list:
- x[1].save()
- self.session.openWithCallback(self.keyCancel, ServiceScan)
-
- #self.close()
-
- def keyCancel(self):
- for x in self["config"].list:
- x[1].cancel()
- self.close()
+ def __init__(self, session):
+ Screen.__init__(self, session)
+
+ self.updateSatList()
+ self.createConfig()
+
+
+ self["actions"] = NumberActionMap(["SetupActions"],
+ {
+ "ok": self.keyGo,
+ "cancel": self.keyCancel,
+ "left": self.keyLeft,
+ "right": self.keyRight,
+ "1": self.keyNumberGlobal,
+ "2": self.keyNumberGlobal,
+ "3": self.keyNumberGlobal,
+ "4": self.keyNumberGlobal,
+ "5": self.keyNumberGlobal,
+ "6": self.keyNumberGlobal,
+ "7": self.keyNumberGlobal,
+ "8": self.keyNumberGlobal,
+ "9": self.keyNumberGlobal,
+ "0": self.keyNumberGlobal
+ }, -1)
+
+ self.list = []
+ self["config"] = ConfigList(self.list)
+ self.createSetup()
+
+ self["introduction"] = Label(_("Press OK to start the scan"))
+
+ def updateSatList(self):
+ self.satList = []
+ for slot in nimmanager.nimslots:
+ if (nimmanager.getNimType(slot.slotid) == nimmanager.nimType["DVB-S"]):
+ self.satList.append(nimmanager.getSatListForNim(slot.slotid))
+ else:
+ self.satList.append(None)
+
+ def createSetup(self):
+ self.list = []
+
+ print "ID: " + str(config.scan.nims.value)
+
+ self.list.append(getConfigListEntry(_("Tuner"), config.scan.nims))
+
+ if (nimmanager.getNimType(config.scan.nims.value) == nimmanager.nimType["DVB-S"]):
+ self.list.append(getConfigListEntry(_("Type of scan"), config.scan.type))
+ elif (nimmanager.getNimType(config.scan.nims.value) == nimmanager.nimType["DVB-C"]):
+ self.list.append(getConfigListEntry(_("Type of scan"), config.scan.typecable))
+ elif (nimmanager.getNimType(config.scan.nims.value) == nimmanager.nimType["DVB-T"]):
+ self.list.append(getConfigListEntry(_("Type of scan"), config.scan.typeterrestrial))
+
+
+ if (nimmanager.getNimType(config.scan.nims.value) == nimmanager.nimType["DVB-S"]):
+ if (config.scan.type.value == 0): # single transponder scan
+ self.list.append(getConfigListEntry(_('Satellite'), config.scan.satselection[config.scan.nims.value]))
+ self.list.append(getConfigListEntry(_('Frequency'), config.scan.sat.frequency))
+ self.list.append(getConfigListEntry(_('Inversion'), config.scan.sat.inversion))
+ self.list.append(getConfigListEntry(_('Symbolrate'), config.scan.sat.symbolrate))
+ self.list.append(getConfigListEntry(_("Polarity"), config.scan.sat.polarization))
+ self.list.append(getConfigListEntry(_("FEC"), config.scan.sat.fec))
+ if (config.scan.type.value == 1): # single satellite scan
+ self.updateSatList()
+ print config.scan.satselection[config.scan.nims.value]
+ self.list.append(getConfigListEntry(_("Satellite"), config.scan.satselection[config.scan.nims.value]))
+ if (config.scan.type.value == 2): # multi sat scan
+ # if (norotor)
+ tlist = []
+ SatList = nimmanager.getSatListForNim(config.scan.nims.value)
+
+ for x in SatList:
+ if self.Satexists(tlist, x[1]) == 0:
+ tlist.append(x[1])
+ sat = configElement_nonSave(x[1], configSelection, 0, (_("Enable"), _("Disable")))
+ self.list.append(getConfigListEntry(nimmanager.getSatDescription(x[1]), sat))
+
+ # if (rotor):
+ # for sat in nimmanager.satList:
+ # self.list.append(getConfigListEntry(sat[0], config.scan.scansat[sat[1]]))
+
+
+ if (nimmanager.getNimType(config.scan.nims.value) == nimmanager.nimType["DVB-C"]):
+ if (config.scan.typecable.value == 0): # single transponder
+ self.list.append(getConfigListEntry(_("Frequency"), config.scan.cab.frequency))
+ self.list.append(getConfigListEntry(_("Inversion"), config.scan.cab.inversion))
+ self.list.append(getConfigListEntry(_("Symbolrate"), config.scan.cab.symbolrate))
+ self.list.append(getConfigListEntry(_("Modulation"), config.scan.cab.modulation))
+ self.list.append(getConfigListEntry(_("FEC"), config.scan.cab.fec))
+ if (config.scan.typecable.value == 1): # complete
+ pass
+
+ if (nimmanager.getNimType(config.scan.nims.value) == nimmanager.nimType["DVB-T"]):
+ if (config.scan.typeterrestrial.value == 0): # single transponder
+ self.list.append(getConfigListEntry(_("Frequency"), config.scan.ter.frequency))
+ self.list.append(getConfigListEntry(_("Inversion"), config.scan.ter.inversion))
+ self.list.append(getConfigListEntry(_("Bandwidth"), config.scan.ter.bandwidth))
+ self.list.append(getConfigListEntry(_("Code rate high"), config.scan.ter.fechigh))
+ self.list.append(getConfigListEntry(_("Code rate low"), config.scan.ter.feclow))
+ self.list.append(getConfigListEntry(_("Modulation"), config.scan.ter.modulation))
+ self.list.append(getConfigListEntry(_("Transmission mode"), config.scan.ter.transmission))
+ self.list.append(getConfigListEntry(_("Guard interval mode"), config.scan.ter.guard))
+ self.list.append(getConfigListEntry(_("Hierarchy mode"), config.scan.ter.hierarchy))
+ if (config.scan.typeterrestrial.value == 1): # complete
+ pass
+
+ self["config"].list = self.list
+ self["config"].l.setList(self.list)
+
+ def Satexists(self, tlist, pos):
+ for x in tlist:
+ if x == pos:
+ return 1
+ return 0
+
+ def newConfig(self):
+ print self["config"].getCurrent()
+ if self["config"].getCurrent()[0] == _("Type of scan"):
+ self.createSetup()
+ if self["config"].getCurrent()[0] == _("Tuner"):
+ self.createSetup()
+
+ def createConfig(self):
+ config.scan = ConfigSubsection()
+ config.scan.sat = ConfigSubsection()
+ config.scan.cab = ConfigSubsection()
+ config.scan.ter = ConfigSubsection()
+
+ config.scan.type = configElement_nonSave("config.scan.type", configSelection, 0, ("Single transponder", "Single satellite", "Multisat"))
+ config.scan.typecable = configElement_nonSave("config.scan.typecable", configSelection, 0, ("Single transponder", "Complete"))
+ config.scan.typeterrestrial = configElement_nonSave("config.scan.typeterrestrial", configSelection, 0, ("Single transponder", "Complete"))
+
+ nimList = [ ]
+ for nim in nimmanager.nimList():
+ nimList.append(nim[0])
+ nimList.append("all")
+ config.scan.nims = configElement_nonSave("config.scan.nims", configSelection, 0, nimList)
+
+ # sat
+ config.scan.sat.frequency = configElement_nonSave("config.scan.sat.frequency", configSequence, [11836], configsequencearg.get("INTEGER", (10000, 14000)))
+ config.scan.sat.inversion = configElement_nonSave("config.scan.sat.inversion", configSelection, 2, (_("on"), _("off"), _("Auto")))
+ config.scan.sat.symbolrate = configElement_nonSave("config.scan.sat.symbolrate", configSequence, [27500], configsequencearg.get("INTEGER", (1, 99999)))
+ config.scan.sat.polarization = configElement_nonSave("config.scan.sat.polarization", configSelection, 0, (_("horizontal"), _("vertical"), _("circular left"), _("circular right")))
+ config.scan.sat.fec = configElement_nonSave("config.scan.sat.fec", configSelection, 7, ("None", "1/2", "2/3", "3/4", "5/6", "7/8", "auto"))
+
+ # cable
+ config.scan.cab.frequency = configElement_nonSave("config.scan.cab.frequency", configSequence, [466], configsequencearg.get("INTEGER", (50, 9999)))
+ config.scan.cab.inversion = configElement_nonSave("config.scan.cab.inversion", configSelection, 2, (_("off"), _("on"), _("Auto")))
+ config.scan.cab.modulation = configElement_nonSave("config.scan.cab.modulation", configSelection, 2, ("16-QAM", "32-QAM", "64-QAM", "128-QAM", "256-QAM", _("Auto")))
+ config.scan.cab.fec = configElement_nonSave("config.scan.cab.fec", configSelection, 9, (_("None"), "1/2", "2/3", "3/4", "4/5", "5/6", "6/7", "7/8", "8/9", _("Auto")))
+ config.scan.cab.symbolrate = configElement_nonSave("config.scan.cab.symbolrate", configSequence, [6900], configsequencearg.get("INTEGER", (1, 9999)))
+
+ # terrestial
+ config.scan.ter.frequency = configElement_nonSave("config.scan.ter.frequency", configSequence, [466], configsequencearg.get("INTEGER", (10000, 14000)))
+ config.scan.ter.inversion = configElement_nonSave("config.scan.ter.inversion", configSelection, 2, (_("off"), _("on"), _("Auto")))
+ config.scan.ter.bandwidth = configElement_nonSave("config.scan.ter.bandwidth", configSelection, 3, ("8MHz", "7MHz", "6MHz", _("Auto")))
+ config.scan.ter.fechigh = configElement_nonSave("config.scan.ter.fechigh", configSelection, 6, (_("None"), "1/2", "2/3", "3/4", "5/6", "7/8", _("Auto")))
+ config.scan.ter.feclow = configElement_nonSave("config.scan.ter.feclow", configSelection, 6, (_("None"), "1/2", "2/3", "3/4", "5/6", "7/8", _("Auto")))
+ config.scan.ter.modulation = configElement_nonSave("config.scan.ter.modulation", configSelection, 2, ("QPSK", "QAM16", _("Auto")))
+ config.scan.ter.transmission = configElement_nonSave("config.scan.ter.transmission", configSelection, 2, ("2K", "8K", _("Auto")))
+ config.scan.ter.guard = configElement_nonSave("config.scan.ter.guard", configSelection, 4, ("1/32", "1/16", "1/8", "1/4", _("Auto")))
+ config.scan.ter.hierarchy = configElement_nonSave("config.scan.ter.hierarchy", configSelection, 4, (_("None"), "1", "2", "4", _("Auto")))
+
+ config.scan.scansat = {}
+ for sat in nimmanager.satList:
+ #print sat[1]
+ config.scan.scansat[sat[1]] = configElement_nonSave("config.scan.scansat[" + str(sat[1]) + "]", configSelection, 0, (_("yes"), _("no")))
+
+ config.scan.satselection = []
+ slotid = 0
+ for slot in nimmanager.nimslots:
+ if (nimmanager.getNimType(slot.slotid) == nimmanager.nimType["DVB-S"]):
+ print str(slot.slotid) + " : " + str(self.satList)
+ config.scan.satselection.append(configElement_nonSave("config.scan.satselection[" + str(slot.slotid) + "]", configSatlist, 0, self.satList[slot.slotid]))
+ else:
+ config.scan.satselection.append(None)
+ def keyLeft(self):
+ self["config"].handleKey(config.key["prevElement"])
+ self.newConfig()
+
+ def keyRight(self):
+ self["config"].handleKey(config.key["nextElement"])
+ self.newConfig()
+
+ def keyNumberGlobal(self, number):
+ print "You pressed number " + str(number)
+ if (self["config"].getCurrent()[1].parent.enabled == True):
+ self["config"].handleKey(config.key[str(number)])
+
+ def addSatTransponder(self, tlist, frequency, symbol_rate, polarisation, fec, inversion, orbital_position):
+ print "Add Sat: frequ: " + str(frequency) + " symbol: " + str(symbol_rate) + " pol: " + str(polarisation) + " fec: " + str(fec) + " inversion: " + str(inversion)
+ print "orbpos: " + str(orbital_position)
+ parm = eDVBFrontendParametersSatellite()
+ parm.frequency = frequency * 1000
+ parm.symbol_rate = symbol_rate * 1000
+ parm.polarisation = polarisation # eDVBFrontendParametersSatellite.Polarisation.Verti
+ parm.fec = fec # eDVBFrontendParametersSatellite.FEC.f3_4;
+ #parm.fec = 6 # AUTO
+ parm.inversion = inversion #eDVBFrontendParametersSatellite.Inversion.Off;
+ #parm.inversion = 2 #AUTO
+ parm.orbital_position = int(orbital_position)
+ tlist.append(parm)
+
+ # FIXME use correct parameters
+ def addCabTransponder(self, tlist, frequency, symbol_rate, modulation, fec, inversion):
+ print "Add Sat: frequ: " + str(frequency) + " symbol: " + str(symbol_rate) + " pol: " + str(modulation) + " fec: " + str(fec) + " inversion: " + str(inversion)
+ parm = eDVBFrontendParametersCable()
+ parm.frequency = frequency * 1000
+ parm.symbol_rate = symbol_rate * 1000
+ parm.modulation = modulation # eDVBFrontendParametersSatellite.Polarisation.Verti
+ parm.fec = fec # eDVBFrontendParametersSatellite.FEC.f3_4;
+ #parm.fec = 6 # AUTO
+ parm.inversion = inversion #eDVBFrontendParametersSatellite.Inversion.Off;
+ #parm.inversion = 2 #AUTO
+ tlist.append(parm)
+
+ # FIXME use correct parameters
+ def addTerTransponder(self, tlist, frequency, symbol_rate, polarisation, fec, inversion, orbital_position):
+ print "Add Sat: frequ: " + str(frequency) + " symbol: " + str(symbol_rate) + " pol: " + str(polarisation) + " fec: " + str(fec) + " inversion: " + str(inversion)
+ print "orbpos: " + str(orbital_position)
+ parm = eDVBFrontendParametersTerrestrial()
+ parm.frequency = frequency * 1000
+ parm.symbol_rate = symbol_rate * 1000
+ parm.polarisation = polarisation # eDVBFrontendParametersSatellite.Polarisation.Verti
+ parm.fec = fec # eDVBFrontendParametersSatellite.FEC.f3_4;
+ #parm.fec = 6 # AUTO
+ parm.inversion = inversion #eDVBFrontendParametersSatellite.Inversion.Off;
+ #parm.inversion = 2 #AUTO
+ parm.orbital_position = int(orbital_position)
+ tlist.append(parm)
+
+ def keyGo(self):
+ tlist = []
+ flags = 0
+ if (config.scan.type.value == 0): # single transponder scan
+ if (nimmanager.getNimType(config.scan.nims.value) == nimmanager.nimType["DVB-S"]):
+ self.addSatTransponder(tlist, config.scan.sat.frequency.value[0],
+ config.scan.sat.symbolrate.value[0],
+ config.scan.sat.polarization.value,
+ config.scan.sat.fec.value,
+ config.scan.sat.inversion.value,
+ self.satList[config.scan.nims.value][config.scan.satselection[config.scan.nims.value].value][1])
+ if (nimmanager.getNimType(config.scan.nims.value) == nimmanager.nimType["DVB-C"]):
+ self.addCabTransponder(tlist, config.scan.cab.frequency.value[0],
+ config.scan.cab.symbolrate.value[0],
+ config.scan.cab.modulation.value,
+ config.scan.cab.fec.value,
+ config.scan.cab.inversion.value)
+ if (nimmanager.getNimType(config.scan.nims.value) == nimmanager.nimType["DVB-T"]):
+ self.addTerTransponder(tlist, config.scan.sat.frequency.value[0],
+ config.scan.sat.symbolrate.value[0],
+ config.scan.sat.polarization.value,
+ config.scan.sat.fec.value,
+ config.scan.sat.inversion.value,
+ self.satList[config.scan.nims.value][config.scan.satselection[config.scan.nims.value].value][1])
+
+ if (config.scan.type.value == 1): # single sat scan
+ getInitialTransponderList(tlist, int(self.satList[config.scan.nims.value][config.scan.satselection[config.scan.nims.value].value][1]))
+ flags |= eComponentScan.scanNetworkSearch
+
+ if (config.scan.type.value == 2): # multi sat scan
+ SatList = nimmanager.getSatListForNim(config.scan.nims.value)
+
+ for x in self.list:
+ if x[1].parent.value == 0:
+ print " " + str(x[1].parent.configPath)
+ getInitialTransponderList(tlist, x[1].parent.configPath)
+ flags |= eComponentScan.scanNetworkSearch
+
+ for x in self["config"].list:
+ x[1].save()
+
+ feid = config.scan.nims.value
+ # flags |= eComponentScan.scanSearchBAT
+ self.session.openWithCallback(self.keyCancel, ServiceScan, tlist, feid, flags)
+
+ #self.close()
+
+ def keyCancel(self):
+ for x in self["config"].list:
+ x[1].cancel()
+ self.close()
class ScanSimple(Screen):
def keyOK(self):
print "start scan for sats:"
+ tlist = [ ]
for x in self.list:
if x[1].parent.value == 0:
print " " + str(x[1].parent.configPath)
-
+ getInitialTransponderList(tlist, x[1].parent.configPath)
+
+ feid = 0 # FIXME
+ self.session.openWithCallback(self.keyCancel, ServiceScan, tlist, feid, eComponentScan.scanNetworkSearch)
+
def keyCancel(self):
self.close()
"left": self.keyLeft,
"right": self.keyRight,
}, -1)
-
+
self.list = []
tlist = []
-
+
SatList = nimmanager.getConfiguredSats()
for x in SatList:
if self.Satexists(tlist, x) == 0:
tlist.append(x)
- sat = configElement_nonSave(x, configSelection, 0, ("Enable", "Disable"))
+ sat = configElement_nonSave(x, configSelection, 0, (_("Enable"), _("Disable")))
self.list.append(getConfigListEntry(nimmanager.getSatDescription(x), sat))
self["config"] = ConfigList(self.list)
- self["header"] = Label("Automatic Scan")
- self["footer"] = Label("Press OK to scan")
+ self["header"] = Label(_("Automatic Scan"))
+ self["footer"] = Label(_("Press OK to scan"))
git.cweiske.de / enigma2.git / blobdiff