fix tune failed problems on fast zap when a diseqc swicth is in use
[enigma2.git] / lib / dvb / sec.h
index 18bc2b37d67e75c63012b35ea6065abd5f9a7116..2f30e7817f3e2df4df770d675718a436c63f6701 100644 (file)
@@ -12,11 +12,18 @@ public:
        enum {
                NONE, SLEEP, SET_VOLTAGE, SET_TONE, GOTO,
                SEND_DISEQC, SEND_TONEBURST, SET_FRONTEND,
-               MEASURE_IDLE_INPUTPOWER, MEASURE_RUNNING_INPUTPOWER,
-               IF_TIMEOUT_GOTO, IF_INPUTPOWER_DELTA_GOTO,
-               UPDATE_CURRENT_ROTORPARAMS, SET_TIMEOUT,
-               IF_IDLE_INPUTPOWER_AVAIL_GOTO, SET_POWER_LIMITING_MODE,
-               IF_VOLTAGE_GOTO
+               SET_TIMEOUT, IF_TIMEOUT_GOTO, 
+               IF_VOLTAGE_GOTO, IF_NOT_VOLTAGE_GOTO,
+               SET_POWER_LIMITING_MODE,
+               SET_ROTOR_DISEQC_RETRYS, IF_NO_MORE_ROTOR_DISEQC_RETRYS_GOTO,
+               MEASURE_IDLE_INPUTPOWER, MEASURE_RUNNING_INPUTPOWER,
+               IF_MEASURE_IDLE_WAS_NOT_OK_GOTO, IF_INPUTPOWER_DELTA_GOTO,
+               UPDATE_CURRENT_ROTORPARAMS, INVALIDATE_CURRENT_ROTORPARMS,
+               UPDATE_CURRENT_SWITCHPARMS, INVALIDATE_CURRENT_SWITCHPARMS,
+               IF_ROTORPOS_VALID_GOTO,
+               IF_TUNER_LOCKED_GOTO,
+               IF_TONE_GOTO, IF_NOT_TONE_GOTO,
+               START_TUNE_TIMEOUT
        };
        int cmd;
        struct rotor
@@ -28,7 +35,12 @@ public:
        };
        struct pair
        {
-               int voltage;
+               union
+               {
+                       int voltage;
+                       int tone;
+                       int val;
+               };
                int steps;
        };
        union
@@ -67,8 +79,12 @@ public:
 
 class eSecCommandList
 {
-       std::list<eSecCommand> secSequence;
-       std::list<eSecCommand>::iterator cur;
+       typedef std::list<eSecCommand> List;
+       List secSequence;
+public:
+       typedef List::iterator iterator;
+private:
+       iterator cur;
 public:
        eSecCommandList()
                :cur(secSequence.end())
@@ -87,15 +103,15 @@ public:
                secSequence.clear();
                cur=secSequence.end();
        }
-       inline std::list<eSecCommand>::iterator &current()
+       inline iterator &current()
        {
                return cur;
        }
-       inline std::list<eSecCommand>::iterator begin()
+       inline iterator begin()
        {
                return secSequence.begin();
        }
-       inline std::list<eSecCommand>::iterator end()
+       inline iterator end()
        {
                return secSequence.end();
        }
@@ -165,6 +181,7 @@ class eDVBSatelliteRotorParameters
 #endif
 public:
        enum { NORTH, SOUTH, EAST, WEST };
+       enum { FAST, SLOW };
 #ifndef SWIG
        eDVBSatelliteRotorParameters() { setDefaultOptions(); }
 
@@ -172,6 +189,7 @@ public:
        {
                bool m_use;     // can we use rotor inputpower to detect rotor running state ?
                __u8 m_delta;   // delta between running and stopped rotor
+               unsigned int m_turning_speed; // SLOW, FAST, or fast turning epoch
        };
        eDVBSatelliteRotorInputpowerParameters m_inputpower_parameters;
 
@@ -186,6 +204,7 @@ public:
 
        void setDefaultOptions() // set default rotor options
        {
+               m_inputpower_parameters.m_turning_speed = FAST; // fast turning
                m_inputpower_parameters.m_use = true;
                m_inputpower_parameters.m_delta = 60;
                m_gotoxx_parameters.m_lo_direction = EAST;
@@ -207,7 +226,7 @@ public:
 #ifndef SWIG
        t_12V_relais_state m_12V_relais_state;  // 12V relais output on/off
 
-       __u8 tuner_mask; // useable by tuner ( 1 | 2 | 4...)
+       __u8 slot_mask; // useable by slot ( 1 | 2 | 4...)
 
        unsigned int m_lof_hi,  // for 2 band universal lnb 10600 Mhz (high band offset frequency)
                                m_lof_lo,       // for 2 band universal lnb  9750 Mhz (low band offset frequency)
@@ -225,6 +244,26 @@ class eDVBRegisteredFrontend;
 
 class eDVBSatelliteEquipmentControl: public iDVBSatelliteEquipmentControl
 {
+       DECLARE_REF(eDVBSatelliteEquipmentControl);
+public:
+       enum {
+               DELAY_AFTER_CONT_TONE=0,  // delay after continuous tone change
+               DELAY_AFTER_FINAL_VOLTAGE_CHANGE, // delay after voltage change at end of complete sequence
+               DELAY_BETWEEN_DISEQC_REPEATS, // delay between repeated diseqc commands
+               DELAY_AFTER_LAST_DISEQC_CMD, // delay after last diseqc command
+               DELAY_AFTER_TONEBURST, // delay after toneburst
+               DELAY_AFTER_ENABLE_VOLTAGE_BEFORE_SWITCH_CMDS, // delay after enable voltage before transmit toneburst/diseqc
+               DELAY_BETWEEN_SWITCH_AND_MOTOR_CMD, // delay after transmit toneburst / diseqc and before transmit motor command
+               DELAY_AFTER_VOLTAGE_CHANGE_BEFORE_MEASURE_IDLE_INPUTPOWER, // delay after voltage change before measure idle input power
+               DELAY_AFTER_ENABLE_VOLTAGE_BEFORE_MOTOR_CMD, // delay after enable voltage before transmit motor command
+               DELAY_AFTER_MOTOR_STOP_CMD, // delay after transmit motor stop
+               DELAY_AFTER_VOLTAGE_CHANGE_BEFORE_MOTOR_CMD, // delay after voltage change before transmit motor command
+               MOTOR_COMMAND_RETRIES, // max transmit tries of rotor command when the rotor dont start turning (with power measurement)
+               MOTOR_RUNNING_TIMEOUT, // max motor running time before timeout
+               DELAY_AFTER_VOLTAGE_CHANGE_BEFORE_SWITCH_CMDS, // delay after change voltage before transmit toneburst/diseqc
+               MAX_PARAMS
+       };
+private:
 #ifndef SWIG
        static eDVBSatelliteEquipmentControl *instance;
        eDVBSatelliteLNBParameters m_lnbs[128]; // i think its enough
@@ -232,26 +271,27 @@ class eDVBSatelliteEquipmentControl: public iDVBSatelliteEquipmentControl
        std::map<int, eDVBSatelliteSwitchParameters>::iterator m_curSat;
        eSmartPtrList<eDVBRegisteredFrontend> &m_avail_frontends;
        bool m_rotorMoving;
+       int m_not_linked_slot_mask;
+       bool m_canMeasureInputPower;
 #endif
 #ifdef SWIG
        eDVBSatelliteEquipmentControl();
        ~eDVBSatelliteEquipmentControl();
 #endif
-       // helper function for setTunerLinked and setTunerDepends
-       RESULT setDependencyPointers( int no1, int no2, int dest_data_byte );
+       static int m_params[MAX_PARAMS];
 public:
 #ifndef SWIG
        eDVBSatelliteEquipmentControl(eSmartPtrList<eDVBRegisteredFrontend> &avail_frontends);
-       DECLARE_REF(eDVBSatelliteEquipmentControl);
-       RESULT prepare(iDVBFrontend &frontend, FRONTENDPARAMETERS &parm, eDVBFrontendParametersSatellite &sat, int frontend_id);
+       RESULT prepare(iDVBFrontend &frontend, FRONTENDPARAMETERS &parm, const eDVBFrontendParametersSatellite &sat, int frontend_id, unsigned int tunetimeout);
        int canTune(const eDVBFrontendParametersSatellite &feparm, iDVBFrontend *, int frontend_id);
        bool currentLNBValid() { return m_lnbidx > -1 && m_lnbidx < (int)(sizeof(m_lnbs) / sizeof(eDVBSatelliteLNBParameters)); }
 #endif
        static eDVBSatelliteEquipmentControl *getInstance() { return instance; }
+       static void setParam(int param, int value);
        RESULT clear();
 /* LNB Specific Parameters */
        RESULT addLNB();
-       RESULT setLNBTunerMask(int tunermask);
+       RESULT setLNBSlotMask(int slotmask);
        RESULT setLNBLOFL(int lofl);
        RESULT setLNBLOFH(int lofh);
        RESULT setLNBThreshold(int threshold);
@@ -272,6 +312,7 @@ public:
        RESULT setLaDirection(int direction);
        RESULT setUseInputpower(bool onoff);
        RESULT setInputpowerDelta(int delta);  // delta between running and stopped rotor
+       RESULT setRotorTurningSpeed(int speed);  // set turning speed..
 /* Satellite Specific Parameters */
        RESULT addSatellite(int orbital_position);
        RESULT setVoltageMode(int mode);
@@ -280,9 +321,11 @@ public:
 /* Tuner Specific Parameters */
        RESULT setTunerLinked(int from, int to);
        RESULT setTunerDepends(int from, int to);
+       void setSlotNotLinked(int tuner_no);
 
        void setRotorMoving(bool); // called from the frontend's
        bool isRotorMoving();
+       bool canMeasureInputPower() { return m_canMeasureInputPower; }
 };
 
 #endif