Merge commit 'origin/translations' into experimental
[enigma2.git] / lib / dvb / sec.h
index 0bda004c9ccba788e87e44d0039a68d5a5297619..c50aee4d381c28dcb9712cb064efda508790e97b 100644 (file)
 #ifndef __dvb_sec_h
 #define __dvb_sec_h
 
-#include <config.h>
 #include <lib/dvb/idvb.h>
+#include <list>
+
+#ifndef SWIG
+class eSecCommand
+{
+public:
+       enum { modeStatic, modeDynamic };
+       enum {
+               NONE, SLEEP, SET_VOLTAGE, SET_TONE, GOTO,
+               SEND_DISEQC, SEND_TONEBURST, SET_FRONTEND,
+               SET_TIMEOUT, IF_TIMEOUT_GOTO, 
+               IF_VOLTAGE_GOTO, IF_NOT_VOLTAGE_GOTO,
+               SET_POWER_LIMITING_MODE,
+               SET_ROTOR_DISEQC_RETRYS, IF_NO_MORE_ROTOR_DISEQC_RETRYS_GOTO,
+               MEASURE_IDLE_INPUTPOWER, MEASURE_RUNNING_INPUTPOWER,
+               IF_MEASURE_IDLE_WAS_NOT_OK_GOTO, IF_INPUTPOWER_DELTA_GOTO,
+               UPDATE_CURRENT_ROTORPARAMS, INVALIDATE_CURRENT_ROTORPARMS,
+               UPDATE_CURRENT_SWITCHPARMS, INVALIDATE_CURRENT_SWITCHPARMS,
+               IF_ROTORPOS_VALID_GOTO,
+               IF_TUNER_LOCKED_GOTO,
+               IF_TONE_GOTO, IF_NOT_TONE_GOTO,
+               START_TUNE_TIMEOUT,
+               SET_ROTOR_MOVING,
+               SET_ROTOR_STOPPED
+       };
+       int cmd;
+       struct rotor
+       {
+               union {
+                       int deltaA;   // difference in mA between running and stopped rotor
+                       int lastSignal;
+               };
+               int okcount;  // counter
+               int steps;    // goto steps
+               int direction;
+       };
+       struct pair
+       {
+               union
+               {
+                       int voltage;
+                       int tone;
+                       int val;
+               };
+               int steps;
+       };
+       union
+       {
+               int val;
+               int steps;
+               int timeout;
+               int voltage;
+               int tone;
+               int toneburst;
+               int msec;
+               int mode;
+               rotor measure;
+               eDVBDiseqcCommand diseqc;
+               pair compare;
+       };
+       eSecCommand( int cmd )
+               :cmd(cmd)
+       {}
+       eSecCommand( int cmd, int val )
+               :cmd(cmd), val(val)
+       {}
+       eSecCommand( int cmd, eDVBDiseqcCommand diseqc )
+               :cmd(cmd), diseqc(diseqc)
+       {}
+       eSecCommand( int cmd, rotor measure )
+               :cmd(cmd), measure(measure)
+       {}
+       eSecCommand( int cmd, pair compare )
+               :cmd(cmd), compare(compare)
+       {}
+       eSecCommand()
+               :cmd(NONE)
+       {}
+};
+
+class eSecCommandList
+{
+       typedef std::list<eSecCommand> List;
+       List secSequence;
+public:
+       typedef List::iterator iterator;
+private:
+       iterator cur;
+public:
+       eSecCommandList()
+               :cur(secSequence.end())
+       {
+       }
+       void push_front(const eSecCommand &cmd)
+       {
+               secSequence.push_front(cmd);
+       }
+       void push_back(const eSecCommand &cmd)
+       {
+               secSequence.push_back(cmd);
+       }
+       void clear()
+       {
+               secSequence.clear();
+               cur=secSequence.end();
+       }
+       inline iterator &current()
+       {
+               return cur;
+       }
+       inline iterator begin()
+       {
+               return secSequence.begin();
+       }
+       inline iterator end()
+       {
+               return secSequence.end();
+       }
+       int size() const
+       {
+               return secSequence.size();
+       }
+       operator bool() const
+       {
+               return secSequence.size();
+       }
+};
+#endif
+
+class eDVBSatelliteDiseqcParameters
+{
+#ifdef SWIG
+       eDVBSatelliteDiseqcParameters();
+       ~eDVBSatelliteDiseqcParameters();
+#endif
+public:
+       enum { AA=0, AB=1, BA=2, BB=3, SENDNO=4 /* and 0xF0 .. 0xFF*/  };       // DiSEqC Parameter
+       enum t_diseqc_mode { NONE=0, V1_0=1, V1_1=2, V1_2=3, SMATV=4 }; // DiSEqC Mode
+       enum t_toneburst_param { NO=0, A=1, B=2 };
+#ifndef SWIG
+       __u8 m_committed_cmd;
+       t_diseqc_mode m_diseqc_mode;
+       t_toneburst_param m_toneburst_param;
+
+       __u8 m_repeats; // for cascaded switches
+       bool m_use_fast;        // send no DiSEqC on H/V or Lo/Hi change
+       bool m_seq_repeat;      // send the complete DiSEqC Sequence twice...
+       __u8 m_command_order;
+       /*      diseqc 1.0)
+                       0) commited, toneburst
+                       1) toneburst, committed
+               diseqc > 1.0)
+                       2) committed, uncommitted, toneburst
+                       3) toneburst, committed, uncommitted
+                       4) uncommitted, committed, toneburst
+                       5) toneburst, uncommitted, committed */
+       __u8 m_uncommitted_cmd; // state of the 4 uncommitted switches..
+#endif
+};
+
+class eDVBSatelliteSwitchParameters
+{
+#ifdef SWIG
+       eDVBSatelliteSwitchParameters();
+       ~eDVBSatelliteSwitchParameters();
+#endif
+public:
+       enum t_22khz_signal {   HILO=0, ON=1, OFF=2     }; // 22 Khz
+       enum t_voltage_mode     {       HV=0, _14V=1, _18V=2, _0V=3, HV_13=4 }; // 14/18 V
+#ifndef SWIG
+       t_voltage_mode m_voltage_mode;
+       t_22khz_signal m_22khz_signal;
+       __u8 m_rotorPosNum; // 0 is disable.. then use gotoxx
+#endif
+};
+
+class eDVBSatelliteRotorParameters
+{
+#ifdef SWIG
+       eDVBSatelliteRotorParameters();
+       ~eDVBSatelliteRotorParameters();
+#endif
+public:
+       enum { NORTH, SOUTH, EAST, WEST };
+       enum { FAST, SLOW };
+#ifndef SWIG
+       eDVBSatelliteRotorParameters() { setDefaultOptions(); }
+
+       struct eDVBSatelliteRotorInputpowerParameters
+       {
+               bool m_use;     // can we use rotor inputpower to detect rotor running state ?
+               __u8 m_delta;   // delta between running and stopped rotor
+               unsigned int m_turning_speed; // SLOW, FAST, or fast turning epoch
+       };
+       eDVBSatelliteRotorInputpowerParameters m_inputpower_parameters;
+
+       struct eDVBSatelliteRotorGotoxxParameters
+       {
+               __u8 m_lo_direction;    // EAST, WEST
+               __u8 m_la_direction;    // NORT, SOUTH
+               double m_longitude;     // longitude for gotoXX? function
+               double m_latitude;      // latitude for gotoXX? function
+       };
+       eDVBSatelliteRotorGotoxxParameters m_gotoxx_parameters;
+
+       void setDefaultOptions() // set default rotor options
+       {
+               m_inputpower_parameters.m_turning_speed = FAST; // fast turning
+               m_inputpower_parameters.m_use = true;
+               m_inputpower_parameters.m_delta = 60;
+               m_gotoxx_parameters.m_lo_direction = EAST;
+               m_gotoxx_parameters.m_la_direction = NORTH;
+               m_gotoxx_parameters.m_longitude = 0.0;
+               m_gotoxx_parameters.m_latitude = 0.0;
+       }
+#endif
+};
+
+class eDVBSatelliteLNBParameters
+{
+#ifdef SWIG
+       eDVBSatelliteLNBParameters();
+       ~eDVBSatelliteLNBParameters();
+#endif
+public:
+       enum t_12V_relais_state { OFF=0, ON };
+#ifndef SWIG
+       t_12V_relais_state m_12V_relais_state;  // 12V relais output on/off
+
+       int m_slot_mask; // useable by slot ( 1 | 2 | 4...)
+
+       unsigned int m_lof_hi,  // for 2 band universal lnb 10600 Mhz (high band offset frequency)
+                               m_lof_lo,       // for 2 band universal lnb  9750 Mhz (low band offset frequency)
+                               m_lof_threshold;        // for 2 band universal lnb 11750 Mhz (band switch frequency)
+
+       bool m_increased_voltage; // use increased voltage ( 14/18V )
+
+       std::map<int, eDVBSatelliteSwitchParameters> m_satellites;
+       eDVBSatelliteDiseqcParameters m_diseqc_parameters;
+       eDVBSatelliteRotorParameters m_rotor_parameters;
+
+       int m_prio; // to override automatic tuner management ... -1 is Auto
+#endif
+public:
+#define guard_offset_min -8000
+#define guard_offset_max 8000
+#define guard_offset_step 8000
+#define MAX_SATCR 8
+#define MAX_LNBNUM 32
+
+       int SatCR_idx;
+       unsigned int SatCRvco;
+       unsigned int UnicableTuningWord;
+       unsigned int UnicableConfigWord;
+       int old_frequency;
+       int old_polarisation;
+       int old_orbital_position;
+       int guard_offset_old;
+       int guard_offset;
+       int LNBNum;
+};
+
+class eDVBRegisteredFrontend;
 
 class eDVBSatelliteEquipmentControl: public iDVBSatelliteEquipmentControl
 {
+       DECLARE_REF(eDVBSatelliteEquipmentControl);
 public:
-       DECLARE_REF;
+       enum {
+               DELAY_AFTER_CONT_TONE_DISABLE_BEFORE_DISEQC=0,  // delay after continuous tone disable before diseqc command
+               DELAY_AFTER_FINAL_CONT_TONE_CHANGE, // delay after continuous tone change before tune
+               DELAY_AFTER_FINAL_VOLTAGE_CHANGE, // delay after voltage change at end of complete sequence
+               DELAY_BETWEEN_DISEQC_REPEATS, // delay between repeated diseqc commands
+               DELAY_AFTER_LAST_DISEQC_CMD, // delay after last diseqc command
+               DELAY_AFTER_TONEBURST, // delay after toneburst
+               DELAY_AFTER_ENABLE_VOLTAGE_BEFORE_SWITCH_CMDS, // delay after enable voltage before transmit toneburst/diseqc
+               DELAY_BETWEEN_SWITCH_AND_MOTOR_CMD, // delay after transmit toneburst / diseqc and before transmit motor command
+               DELAY_AFTER_VOLTAGE_CHANGE_BEFORE_MEASURE_IDLE_INPUTPOWER, // delay after voltage change before measure idle input power
+               DELAY_AFTER_ENABLE_VOLTAGE_BEFORE_MOTOR_CMD, // delay after enable voltage before transmit motor command
+               DELAY_AFTER_MOTOR_STOP_CMD, // delay after transmit motor stop
+               DELAY_AFTER_VOLTAGE_CHANGE_BEFORE_MOTOR_CMD, // delay after voltage change before transmit motor command
+               DELAY_BEFORE_SEQUENCE_REPEAT, // delay before the complete sequence is repeated (when enabled)
+               MOTOR_COMMAND_RETRIES, // max transmit tries of rotor command when the rotor dont start turning (with power measurement)
+               MOTOR_RUNNING_TIMEOUT, // max motor running time before timeout
+               DELAY_AFTER_VOLTAGE_CHANGE_BEFORE_SWITCH_CMDS, // delay after change voltage before transmit toneburst/diseqc
+               DELAY_AFTER_DISEQC_RESET_CMD,
+               DELAY_AFTER_DISEQC_PERIPHERIAL_POWERON_CMD,
+               MAX_PARAMS
+       };
+private:
+#ifndef SWIG
+       static eDVBSatelliteEquipmentControl *instance;
+       eDVBSatelliteLNBParameters m_lnbs[144]; // i think its enough
+       int m_lnbidx; // current index for set parameters
+       std::map<int, eDVBSatelliteSwitchParameters>::iterator m_curSat;
+       eSmartPtrList<eDVBRegisteredFrontend> &m_avail_frontends, &m_avail_simulate_frontends;
+       int m_rotorMoving;
+       int m_not_linked_slot_mask;
+       bool m_canMeasureInputPower;
+#endif
+#ifdef SWIG
        eDVBSatelliteEquipmentControl();
-       RESULT prepare(iDVBFrontend &frontend, FRONTENDPARAMETERS &parm, eDVBFrontendParametersSatellite &sat);
+       ~eDVBSatelliteEquipmentControl();
+#endif
+       static int m_params[MAX_PARAMS];
+public:
+#ifndef SWIG
+       eDVBSatelliteEquipmentControl(eSmartPtrList<eDVBRegisteredFrontend> &avail_frontends, eSmartPtrList<eDVBRegisteredFrontend> &avail_simulate_frontends);
+       RESULT prepare(iDVBFrontend &frontend, FRONTENDPARAMETERS &parm, const eDVBFrontendParametersSatellite &sat, int frontend_id, unsigned int tunetimeout);
+       int canTune(const eDVBFrontendParametersSatellite &feparm, iDVBFrontend *, int frontend_id, int *highest_score_lnb=0);
+       bool currentLNBValid() { return m_lnbidx > -1 && m_lnbidx < (int)(sizeof(m_lnbs) / sizeof(eDVBSatelliteLNBParameters)); }
+#endif
+       static eDVBSatelliteEquipmentControl *getInstance() { return instance; }
+       static void setParam(int param, int value);
+       RESULT clear();
+/* LNB Specific Parameters */
+       RESULT addLNB();
+       RESULT setLNBSlotMask(int slotmask);
+       RESULT setLNBLOFL(int lofl);
+       RESULT setLNBLOFH(int lofh);
+       RESULT setLNBThreshold(int threshold);
+       RESULT setLNBIncreasedVoltage(bool onoff);
+       RESULT setLNBPrio(int prio);
+       RESULT setLNBNum(int LNBNum);
+/* DiSEqC Specific Parameters */
+       RESULT setDiSEqCMode(int diseqcmode);
+       RESULT setToneburst(int toneburst);
+       RESULT setRepeats(int repeats);
+       RESULT setCommittedCommand(int command);
+       RESULT setUncommittedCommand(int command);
+       RESULT setCommandOrder(int order);
+       RESULT setFastDiSEqC(bool onoff);
+       RESULT setSeqRepeat(bool onoff); // send the complete switch sequence twice (without rotor command)
+/* Rotor Specific Parameters */
+       RESULT setLongitude(float longitude);
+       RESULT setLatitude(float latitude);
+       RESULT setLoDirection(int direction);
+       RESULT setLaDirection(int direction);
+       RESULT setUseInputpower(bool onoff);
+       RESULT setInputpowerDelta(int delta);  // delta between running and stopped rotor
+       RESULT setRotorTurningSpeed(int speed);  // set turning speed..
+/* Unicable Specific Parameters */
+       RESULT setLNBSatCR(int SatCR_idx);
+       RESULT setLNBSatCRvco(int SatCRvco);
+//     RESULT checkGuardOffset(const eDVBFrontendParametersSatellite &sat);
+       RESULT getLNBSatCR();
+       RESULT getLNBSatCRvco();
+/* Satellite Specific Parameters */
+       RESULT addSatellite(int orbital_position);
+       RESULT setVoltageMode(int mode);
+       RESULT setToneMode(int mode);
+       RESULT setRotorPosNum(int rotor_pos_num);
+/* Tuner Specific Parameters */
+       RESULT setTunerLinked(int from, int to);
+       RESULT setTunerDepends(int from, int to);
+       void setSlotNotLinked(int tuner_no);
+
+       void setRotorMoving(int, bool); // called from the frontend's
+       bool isRotorMoving();
+       bool canMeasureInputPower() { return m_canMeasureInputPower; }
 };
 
 #endif