X-Git-Url: https://git.cweiske.de/enigma2.git/blobdiff_plain/028c344bce5a88e2292cd01138ee17348bf75f7b..c3943addd798eff78e97168a6a50ef832488a414:/lib/dvb/sec.cpp diff --git a/lib/dvb/sec.cpp b/lib/dvb/sec.cpp index e3fbf26f..ff3f9bd0 100644 --- a/lib/dvb/sec.cpp +++ b/lib/dvb/sec.cpp @@ -1,26 +1,43 @@ -#include +#include #include #include +#include + +#include #if HAVE_DVB_API_VERSION < 3 -#define INVERSION Inversion #define FREQUENCY Frequency -#define FEC_INNER FEC_inner -#define SYMBOLRATE SymbolRate #else -#define INVERSION inversion #define FREQUENCY frequency -#define FEC_INNER fec_inner -#define SYMBOLRATE symbol_rate #endif #include +//#define SEC_DEBUG + +#ifdef SEC_DEBUG +#define eSecDebug(arg...) eDebug(arg) +#else +#define eSecDebug(arg...) +#endif + DEFINE_REF(eDVBSatelliteEquipmentControl); eDVBSatelliteEquipmentControl *eDVBSatelliteEquipmentControl::instance; -eDVBSatelliteEquipmentControl::eDVBSatelliteEquipmentControl() - :m_lnbidx(-1), m_curSat(m_lnbs[0].m_satellites.end()) +int eDVBSatelliteEquipmentControl::m_params[MAX_PARAMS]; +/* + defaults are set in python lib/python/Components/NimManager.py + in InitSecParams function via setParam call +*/ + +void eDVBSatelliteEquipmentControl::setParam(int param, int value) +{ + if (param >= 0 && param < MAX_PARAMS) + m_params[param]=value; +} + +eDVBSatelliteEquipmentControl::eDVBSatelliteEquipmentControl(eSmartPtrList &avail_frontends) + :m_lnbidx(-1), m_curSat(m_lnbs[0].m_satellites.end()), m_avail_frontends(avail_frontends), m_rotorMoving(false) { if (!instance) instance = this; @@ -29,44 +46,247 @@ eDVBSatelliteEquipmentControl::eDVBSatelliteEquipmentControl() // ASTRA addLNB(); - setLNBTunerMask(1); + setLNBSlotMask(3); setLNBLOFL(9750000); - setLNBThreshold(11750000); - setLNBLOFH(10600000); + setLNBThreshold(11700000); + setLNBLOFH(10607000); setDiSEqCMode(eDVBSatelliteDiseqcParameters::V1_0); setToneburst(eDVBSatelliteDiseqcParameters::NO); setRepeats(0); - setCommittedCommand(eDVBSatelliteDiseqcParameters::AA); + setCommittedCommand(eDVBSatelliteDiseqcParameters::BB); setCommandOrder(0); // committed, toneburst - setFastDiSEqC(false); + setFastDiSEqC(true); setSeqRepeat(false); addSatellite(192); setVoltageMode(eDVBSatelliteSwitchParameters::HV); setToneMode(eDVBSatelliteSwitchParameters::HILO); -// HOTBIRD +// Hotbird addLNB(); - setLNBTunerMask(1); + setLNBSlotMask(3); setLNBLOFL(9750000); + setLNBThreshold(11700000); setLNBLOFH(10600000); - setLNBThreshold(11750000); setDiSEqCMode(eDVBSatelliteDiseqcParameters::V1_0); setToneburst(eDVBSatelliteDiseqcParameters::NO); setRepeats(0); setCommittedCommand(eDVBSatelliteDiseqcParameters::AB); setCommandOrder(0); // committed, toneburst - setFastDiSEqC(false); + setFastDiSEqC(true); setSeqRepeat(false); addSatellite(130); setVoltageMode(eDVBSatelliteSwitchParameters::HV); setToneMode(eDVBSatelliteSwitchParameters::HILO); + +// Rotor + addLNB(); + setLNBSlotMask(3); + setLNBLOFL(9750000); + setLNBThreshold(11700000); + setLNBLOFH(10600000); + setDiSEqCMode(eDVBSatelliteDiseqcParameters::V1_2); + setToneburst(eDVBSatelliteDiseqcParameters::NO); + setRepeats(0); + setCommittedCommand(eDVBSatelliteDiseqcParameters::AA); + setCommandOrder(0); // committed, toneburst + setFastDiSEqC(true); + setSeqRepeat(false); + setLaDirection(eDVBSatelliteRotorParameters::NORTH); + setLoDirection(eDVBSatelliteRotorParameters::EAST); + setLatitude(51.017); + setLongitude(8.683); + setUseInputpower(true); + setInputpowerDelta(50); + + addSatellite(235); + setVoltageMode(eDVBSatelliteSwitchParameters::HV); + setToneMode(eDVBSatelliteSwitchParameters::HILO); + setRotorPosNum(0); + + addSatellite(284); + setVoltageMode(eDVBSatelliteSwitchParameters::HV); + setToneMode(eDVBSatelliteSwitchParameters::HILO); + setRotorPosNum(0); + + addSatellite(420); + setVoltageMode(eDVBSatelliteSwitchParameters::HV); + setToneMode(eDVBSatelliteSwitchParameters::HILO); + setRotorPosNum(1); // stored pos 1 +} + +static void checkLinkedParams(int direction, int &linked_ptr, int &ret, const eDVBFrontendParametersSatellite &sat, int csw, int ucsw, int toneburst, bool diseqc, bool rotor, int RotorPos) +{ + eDVBRegisteredFrontend *linked_fe = (eDVBRegisteredFrontend*) linked_ptr; + if (linked_fe->m_inuse) + { + int ocsw = -1, + oucsw = -1, + oToneburst = -1; + linked_fe->m_frontend->getData(eDVBFrontend::CSW, ocsw); + linked_fe->m_frontend->getData(eDVBFrontend::UCSW, oucsw); + linked_fe->m_frontend->getData(eDVBFrontend::TONEBURST, oToneburst); +#if 0 + eDebug("compare csw %02x == lcsw %02x", + csw, ocsw); + if ( diseqc ) + eDebug("compare ucsw %02x == lucsw %02x\ncompare toneburst %02x == oToneburst %02x", + ucsw, oucsw, toneburst, oToneburst); + if ( rotor ) + eDebug("compare pos %d == current pos %d", + sat.orbital_position, oRotorPos); +#endif + if ( (csw != ocsw) || + ( diseqc && (ucsw != oucsw || toneburst != oToneburst) ) || + ( rotor && RotorPos != sat.orbital_position ) ) + { +// eDebug("can not tune this transponder with linked tuner in use!!"); + ret=0; + } +// else +// eDebug("OK .. can tune this transponder with linked tuner in use :)"); + } + linked_fe->m_frontend->getData(direction, linked_ptr); +} + +int eDVBSatelliteEquipmentControl::canTune(const eDVBFrontendParametersSatellite &sat, iDVBFrontend *fe, int slot_id ) +{ + int ret=0, satcount=0; + + for (int idx=0; idx <= m_lnbidx; ++idx ) + { + bool rotor=false; + eDVBSatelliteLNBParameters &lnb_param = m_lnbs[idx]; + if ( lnb_param.slot_mask & slot_id ) // lnb for correct tuner? + { + eDVBSatelliteDiseqcParameters &di_param = lnb_param.m_diseqc_parameters; + + satcount += lnb_param.m_satellites.size(); + + std::map::iterator sit = + lnb_param.m_satellites.find(sat.orbital_position); + if ( sit != lnb_param.m_satellites.end()) + { + int band=0, + linked_prev_ptr=-1, + linked_next_ptr=-1, + satpos_depends_ptr=-1, + csw = di_param.m_committed_cmd, + ucsw = di_param.m_uncommitted_cmd, + toneburst = di_param.m_toneburst_param, + curRotorPos; + + fe->getData(eDVBFrontend::ROTOR_POS, curRotorPos); + fe->getData(eDVBFrontend::LINKED_PREV_PTR, linked_prev_ptr); + fe->getData(eDVBFrontend::LINKED_NEXT_PTR, linked_next_ptr); + fe->getData(eDVBFrontend::SATPOS_DEPENDS_PTR, satpos_depends_ptr); + + if ( sat.frequency > lnb_param.m_lof_threshold ) + band |= 1; + if (!(sat.polarisation & eDVBFrontendParametersSatellite::Polarisation::Vertical)) + band |= 2; + + bool diseqc=false; + + if (di_param.m_diseqc_mode >= eDVBSatelliteDiseqcParameters::V1_0) + { + diseqc=true; + if ( di_param.m_committed_cmd < eDVBSatelliteDiseqcParameters::SENDNO ) + csw = 0xF0 | (csw << 2); + + if (di_param.m_committed_cmd <= eDVBSatelliteDiseqcParameters::SENDNO) + csw |= band; + + if ( di_param.m_diseqc_mode == eDVBSatelliteDiseqcParameters::V1_2 ) // ROTOR + rotor = true; + + ret=10000; + if (rotor && curRotorPos != -1) + ret -= abs(curRotorPos-sat.orbital_position); + } + else + { + csw = band; + ret = 15000; + } + + while (ret && linked_prev_ptr != -1) // check for linked tuners.. + checkLinkedParams(eDVBFrontend::LINKED_PREV_PTR, linked_prev_ptr, ret, sat, csw, ucsw, toneburst, diseqc, rotor, curRotorPos); + + while (ret && linked_next_ptr != -1) // check for linked tuners.. + checkLinkedParams(eDVBFrontend::LINKED_NEXT_PTR, linked_next_ptr, ret, sat, csw, ucsw, toneburst, diseqc, rotor, curRotorPos); + + if (ret) + if (satpos_depends_ptr != -1) + { + eDVBRegisteredFrontend *satpos_depends_to_fe = (eDVBRegisteredFrontend*) satpos_depends_ptr; + if ( satpos_depends_to_fe->m_inuse ) + { + if (!rotor || curRotorPos != sat.orbital_position) + { +// eDebug("can not tune this transponder ... rotor on other tuner is positioned to %d", oRotorPos); + ret=0; + } + } +// else +// eDebug("OK .. can tune this transponder satpos is correct :)"); + } + + if (ret) + { + int lof = sat.frequency > lnb_param.m_lof_threshold ? + lnb_param.m_lof_hi : lnb_param.m_lof_lo; + int tuner_freq = abs(sat.frequency - lof); +// eDebug("tuner freq %d", tuner_freq); + if (tuner_freq < 900000 || tuner_freq > 2200000) + { + ret=0; +// eDebug("Transponder not tuneable with this lnb... %d Khz out of tuner range", +// tuner_freq); + } + } + } + } + } + if (ret && satcount) + ret -= (satcount-1); + if (ret && m_not_linked_slot_mask & slot_id) + ret += 5; // increase score for tuners with direct sat connection + return ret; } -RESULT eDVBSatelliteEquipmentControl::prepare(iDVBFrontend &frontend, FRONTENDPARAMETERS &parm, eDVBFrontendParametersSatellite &sat) +bool need_turn_fast(int turn_speed) +{ + if (turn_speed == eDVBSatelliteRotorParameters::FAST) + return true; + else if (turn_speed != eDVBSatelliteRotorParameters::SLOW) + { + int begin = turn_speed >> 16; // high word is start time + int end = turn_speed&0xFFFF; // low word is end time + time_t now_time = eDVBLocalTimeHandler::getInstance()->nowTime(); + tm nowTime; + localtime_r(&now_time, &nowTime); + int now = (nowTime.tm_hour + 1) * 60 + nowTime.tm_min + 1; + bool neg = end <= begin; + if (neg) { + int tmp = begin; + begin = end; + end = tmp; + } + if ((now >= begin && now < end) ^ neg) + return true; + } + return false; +} + +#define VOLTAGE(x) (lnb_param.m_increased_voltage ? iDVBFrontend::voltage##x##_5 : iDVBFrontend::voltage##x) + +RESULT eDVBSatelliteEquipmentControl::prepare(iDVBFrontend &frontend, FRONTENDPARAMETERS &parm, const eDVBFrontendParametersSatellite &sat, int slot_id) { for (int idx=0; idx <= m_lnbidx; ++idx ) { eDVBSatelliteLNBParameters &lnb_param = m_lnbs[idx]; + if (!(lnb_param.slot_mask & slot_id)) // lnb for correct tuner? + continue; eDVBSatelliteDiseqcParameters &di_param = lnb_param.m_diseqc_parameters; eDVBSatelliteRotorParameters &rotor_param = lnb_param.m_rotor_parameters; @@ -75,8 +295,10 @@ RESULT eDVBSatelliteEquipmentControl::prepare(iDVBFrontend &frontend, FRONTENDPA if ( sit != lnb_param.m_satellites.end()) { eDVBSatelliteSwitchParameters &sw_param = sit->second; - - int hi=0, + bool doSetFrontend = true; + bool doSetVoltageToneFrontend = m_not_linked_slot_mask & slot_id; + bool allowDiseqc1_2 = true; + int band=0, voltage = iDVBFrontend::voltageOff, tone = iDVBFrontend::toneOff, csw = di_param.m_committed_cmd, @@ -86,65 +308,50 @@ RESULT eDVBSatelliteEquipmentControl::prepare(iDVBFrontend &frontend, FRONTENDPA lastucsw = -1, lastToneburst = -1, lastRotorCmd = -1, - curRotorPos = -1; + curRotorPos = -1, + satposDependPtr = -1; + + frontend.getData(eDVBFrontend::CSW, lastcsw); + frontend.getData(eDVBFrontend::UCSW, lastucsw); + frontend.getData(eDVBFrontend::TONEBURST, lastToneburst); + frontend.getData(eDVBFrontend::ROTOR_CMD, lastRotorCmd); + frontend.getData(eDVBFrontend::ROTOR_POS, curRotorPos); + frontend.getData(eDVBFrontend::SATPOS_DEPENDS_PTR, satposDependPtr); - frontend.getData(0, lastcsw); - frontend.getData(1, lastucsw); - frontend.getData(2, lastToneburst); - frontend.getData(5, lastRotorCmd); - frontend.getData(6, curRotorPos); + if (satposDependPtr != -1 && !doSetVoltageToneFrontend) + { + allowDiseqc1_2 = false; + doSetVoltageToneFrontend = true; + } if ( sat.frequency > lnb_param.m_lof_threshold ) - hi = 1; + band |= 1; - if (hi) + if (band&1) parm.FREQUENCY = sat.frequency - lnb_param.m_lof_hi; else parm.FREQUENCY = sat.frequency - lnb_param.m_lof_lo; - parm.INVERSION = (!sat.inversion) ? INVERSION_ON : INVERSION_OFF; + parm.FREQUENCY = abs(parm.FREQUENCY); - switch (sat.fec) - { - default: - case eDVBFrontendParametersSatellite::FEC::fNone: - eDebug("no fec set.. assume auto"); - case eDVBFrontendParametersSatellite::FEC::fAuto: - parm.u.qpsk.FEC_INNER = FEC_AUTO; - break; - case eDVBFrontendParametersSatellite::FEC::f1_2: - parm.u.qpsk.FEC_INNER = FEC_1_2; - break; - case eDVBFrontendParametersSatellite::FEC::f2_3: - parm.u.qpsk.FEC_INNER = FEC_2_3; - break; - case eDVBFrontendParametersSatellite::FEC::f3_4: - parm.u.qpsk.FEC_INNER = FEC_3_4; - break; - case eDVBFrontendParametersSatellite::FEC::f5_6: - parm.u.qpsk.FEC_INNER = FEC_5_6; - break; - case eDVBFrontendParametersSatellite::FEC::f7_8: - parm.u.qpsk.FEC_INNER = FEC_7_8; - break; - } + frontend.setData(eDVBFrontend::FREQ_OFFSET, sat.frequency - parm.FREQUENCY); - parm.u.qpsk.SYMBOLRATE = sat.symbol_rate; + if (!(sat.polarisation & eDVBFrontendParametersSatellite::Polarisation::Vertical)) + band |= 2; if ( sw_param.m_voltage_mode == eDVBSatelliteSwitchParameters::_14V - || ( sat.polarisation == eDVBFrontendParametersSatellite::Polarisation::Vertical + || ( sat.polarisation & eDVBFrontendParametersSatellite::Polarisation::Vertical && sw_param.m_voltage_mode == eDVBSatelliteSwitchParameters::HV ) ) - voltage = iDVBFrontend::voltage13; + voltage = VOLTAGE(13); else if ( sw_param.m_voltage_mode == eDVBSatelliteSwitchParameters::_18V - || ( sat.polarisation == eDVBFrontendParametersSatellite::Polarisation::Horizontal + || ( !(sat.polarisation & eDVBFrontendParametersSatellite::Polarisation::Vertical) && sw_param.m_voltage_mode == eDVBSatelliteSwitchParameters::HV ) ) - voltage = iDVBFrontend::voltage18; - + voltage = VOLTAGE(18); if ( (sw_param.m_22khz_signal == eDVBSatelliteSwitchParameters::ON) - || ( sw_param.m_22khz_signal == eDVBSatelliteSwitchParameters::HILO && hi ) ) + || ( sw_param.m_22khz_signal == eDVBSatelliteSwitchParameters::HILO && (band&1) ) ) tone = iDVBFrontend::toneOn; else if ( (sw_param.m_22khz_signal == eDVBSatelliteSwitchParameters::OFF) - || ( sw_param.m_22khz_signal == eDVBSatelliteSwitchParameters::HILO && !hi ) ) + || ( sw_param.m_22khz_signal == eDVBSatelliteSwitchParameters::HILO && !(band&1) ) ) tone = iDVBFrontend::toneOff; eSecCommandList sec_sequence; @@ -152,13 +359,10 @@ RESULT eDVBSatelliteEquipmentControl::prepare(iDVBFrontend &frontend, FRONTENDPA if (di_param.m_diseqc_mode >= eDVBSatelliteDiseqcParameters::V1_0) { if ( di_param.m_committed_cmd < eDVBSatelliteDiseqcParameters::SENDNO ) - { csw = 0xF0 | (csw << 2); - if (hi) - csw |= 1; - if (sat.polarisation == eDVBFrontendParametersSatellite::Polarisation::Horizontal) - csw |= 2; - } + + if (di_param.m_committed_cmd <= eDVBSatelliteDiseqcParameters::SENDNO) + csw |= band; bool send_csw = (di_param.m_committed_cmd != eDVBSatelliteDiseqcParameters::SENDNO); @@ -172,195 +376,278 @@ RESULT eDVBSatelliteEquipmentControl::prepare(iDVBFrontend &frontend, FRONTENDPA (di_param.m_toneburst_param != eDVBSatelliteDiseqcParameters::NO); bool changed_burst = send_burst && toneburst != lastToneburst; - bool send_diseqc = changed_ucsw; - if (!send_diseqc) - send_diseqc = changed_burst && (send_ucsw || send_csw); - if (!send_diseqc) + int send_mask = 0; /* + 1 must send csw + 2 must send ucsw + 4 send toneburst first + 8 send toneburst at end */ + if (changed_burst) // toneburst first and toneburst changed { - send_diseqc = changed_csw; - if ( send_diseqc && di_param.m_use_fast && (csw & 0xF0) && (lastcsw & 0xF0) && ((csw / 4) == (lastcsw / 4)) ) - send_diseqc = false; + if (di_param.m_command_order&1) + { + send_mask |= 4; + if ( send_csw ) + send_mask |= 1; + if ( send_ucsw ) + send_mask |= 2; + } + else + send_mask |= 8; } - - if ( send_diseqc || changed_burst ) + if (changed_ucsw) { - sec_sequence.push_back( eSecCommand(eSecCommand::SET_TONE, iDVBFrontend::toneOff) ); - eSecCommand::pair compare; - compare.voltage = voltage; - compare.steps = +3; - sec_sequence.push_back( eSecCommand(eSecCommand::IF_VOLTAGE_GOTO, compare) ); // voltage already correct ? - sec_sequence.push_back( eSecCommand(eSecCommand::SET_VOLTAGE, voltage) ); - sec_sequence.push_back( eSecCommand(eSecCommand::SLEEP, 50) ); + send_mask |= 2; + if ((di_param.m_command_order&4) && send_csw) + send_mask |= 1; + if (di_param.m_command_order==4 && send_burst) + send_mask |= 8; } - - for (int seq_repeat = 0; seq_repeat < (di_param.m_seq_repeat?2:1); ++seq_repeat) + if (changed_csw) { - if ( di_param.m_command_order & 1 && // toneburst at begin of sequence - changed_burst && di_param.m_toneburst_param != eDVBSatelliteDiseqcParameters::NO ) + if ( di_param.m_use_fast + && di_param.m_committed_cmd < eDVBSatelliteDiseqcParameters::SENDNO + && (lastcsw & 0xF0) + && ((csw / 4) == (lastcsw / 4)) ) + eDebug("dont send committed cmd (fast diseqc)"); + else { - sec_sequence.push_back( eSecCommand(eSecCommand::SEND_TONEBURST, di_param.m_toneburst_param) ); - sec_sequence.push_back( eSecCommand(eSecCommand::SLEEP, 50) ); - frontend.setData(2, di_param.m_toneburst_param); + send_mask |= 1; + if (!(di_param.m_command_order&4) && send_ucsw) + send_mask |= 2; + if (!(di_param.m_command_order&1) && send_burst) + send_mask |= 8; } + } - if ( send_diseqc ) - { - int loops=0; - - if ( send_csw ) - ++loops; - if ( send_ucsw ) - ++loops; - - for ( int i=0; i < di_param.m_repeats; ++i ) - loops *= 2; +#if 0 + eDebugNoNewLine("sendmask: "); + for (int i=3; i >= 0; --i) + if ( send_mask & (1<= 0) // Northern Hemisphere { - diseqc.data[2] = 0x38; - diseqc.data[3] = csw; + int tmp=(int)round( fabs( 180 - satHourAngle ) * 10.0 ); + RotorCmd = (tmp/10)*0x10 + gotoXTable[ tmp % 10 ]; + + if (satHourAngle < 180) // the east + RotorCmd |= 0xE000; + else // west + RotorCmd |= 0xD000; } - sec_sequence.push_back( eSecCommand(eSecCommand::SEND_DISEQC, diseqc) ); - - i++; - if ( i < loops ) + else // Southern Hemisphere { - int cmd=0; - if (diseqc.data[2] == 0x38 && send_ucsw) - cmd=0x39; - else if (diseqc.data[2] == 0x39 && send_csw) - cmd=0x38; - if (cmd) + if (satHourAngle < 180) // the east + { + int tmp=(int)round( fabs( satHourAngle ) * 10.0 ); + RotorCmd = (tmp/10)*0x10 + gotoXTable[ tmp % 10 ]; + RotorCmd |= 0xD000; + } + else // west { - static int delay = (120 - 54) / 2; // standard says 100msek between two repeated commands - sec_sequence.push_back( eSecCommand(eSecCommand::SLEEP, delay) ); - diseqc.data[2]=cmd; - diseqc.data[3]=(cmd==0x38) ? csw : ucsw; - sec_sequence.push_back( eSecCommand(eSecCommand::SEND_DISEQC, diseqc) ); - ++i; - if ( i < loops ) - sec_sequence.push_back( eSecCommand(eSecCommand::SLEEP, delay ) ); - else - sec_sequence.push_back( eSecCommand(eSecCommand::SLEEP, 50) ); + int tmp=(int)round( fabs( 360 - satHourAngle ) * 10.0 ); + RotorCmd = (tmp/10)*0x10 + gotoXTable[ tmp % 10 ]; + RotorCmd |= 0xE000; } - else // delay 120msek when no command is in repeat gap - sec_sequence.push_back( eSecCommand(eSecCommand::SLEEP, 120) ); } - else - sec_sequence.push_back( eSecCommand(eSecCommand::SLEEP, 50) ); - - frontend.setData(0, csw); - frontend.setData(1, ucsw); + eDebug("RotorCmd = %04x", RotorCmd); } } - if ( !(di_param.m_command_order & 1) && // toneburst at end of sequence - (changed_burst || send_diseqc) && di_param.m_toneburst_param != eDVBSatelliteDiseqcParameters::NO ) + if ( send_mask ) { - sec_sequence.push_back( eSecCommand(eSecCommand::SEND_TONEBURST, di_param.m_toneburst_param) ); - sec_sequence.push_back( eSecCommand(eSecCommand::SLEEP, 50) ); - frontend.setData(2, di_param.m_toneburst_param); - } - } + int vlt = iDVBFrontend::voltageOff; + eSecCommand::pair compare; + compare.steps = +3; + compare.tone = iDVBFrontend::toneOff; + sec_sequence.push_back( eSecCommand(eSecCommand::IF_TONE_GOTO, compare) ); + sec_sequence.push_back( eSecCommand(eSecCommand::SET_TONE, iDVBFrontend::toneOff) ); + sec_sequence.push_back( eSecCommand(eSecCommand::SLEEP, m_params[DELAY_AFTER_CONT_TONE]) ); + + if ( RotorCmd != -1 && RotorCmd != lastRotorCmd ) + { + if (rotor_param.m_inputpower_parameters.m_use) + vlt = VOLTAGE(18); // in input power mode set 18V for measure input power + else + vlt = VOLTAGE(13); // in normal mode start turning with 13V + } + else + vlt = voltage; - if ( di_param.m_diseqc_mode == eDVBSatelliteDiseqcParameters::V1_2 ) - { - int RotorCmd=0; - bool useGotoXX = false; + // check if voltage is already correct.. + compare.voltage = vlt; + compare.steps = +7; + sec_sequence.push_back( eSecCommand(eSecCommand::IF_VOLTAGE_GOTO, compare) ); - if (sw_param.m_rotorPosNum) // we have stored rotor pos? - RotorCmd=sw_param.m_rotorPosNum; - else // we must calc gotoxx cmd - { - eDebug("Entry for %d,%d° not in Rotor Table found... i try gotoXX°", sat.orbital_position / 10, sat.orbital_position % 10 ); - useGotoXX = true; + // check if voltage is disabled + compare.voltage = iDVBFrontend::voltageOff; + compare.steps = +4; + sec_sequence.push_back( eSecCommand(eSecCommand::IF_VOLTAGE_GOTO, compare) ); - int satDir = sat.orbital_position < 0 ? - eDVBSatelliteRotorParameters::WEST : - eDVBSatelliteRotorParameters::EAST; + // voltage is changed... use DELAY_AFTER_VOLTAGE_CHANGE_BEFORE_SWITCH_CMDS + sec_sequence.push_back( eSecCommand(eSecCommand::SET_VOLTAGE, vlt) ); + sec_sequence.push_back( eSecCommand(eSecCommand::SLEEP, m_params[DELAY_AFTER_VOLTAGE_CHANGE_BEFORE_SWITCH_CMDS]) ); + sec_sequence.push_back( eSecCommand(eSecCommand::GOTO, +3) ); - double SatLon = abs(sat.orbital_position)/10.00, - SiteLat = rotor_param.m_gotoxx_parameters.m_latitude, - SiteLon = rotor_param.m_gotoxx_parameters.m_longitude; + // voltage was disabled.. use DELAY_AFTER_ENABLE_VOLTAGE_BEFORE_SWITCH_CMDS + sec_sequence.push_back( eSecCommand(eSecCommand::SET_VOLTAGE, vlt) ); + sec_sequence.push_back( eSecCommand(eSecCommand::SLEEP, m_params[DELAY_AFTER_ENABLE_VOLTAGE_BEFORE_SWITCH_CMDS]) ); - if ( rotor_param.m_gotoxx_parameters.m_la_direction == eDVBSatelliteRotorParameters::SOUTH ) - SiteLat = -SiteLat; + for (int seq_repeat = 0; seq_repeat < (di_param.m_seq_repeat?2:1); ++seq_repeat) + { + if ( send_mask & 4 ) + { + sec_sequence.push_back( eSecCommand(eSecCommand::SEND_TONEBURST, di_param.m_toneburst_param) ); + sec_sequence.push_back( eSecCommand(eSecCommand::SLEEP, m_params[DELAY_AFTER_TONEBURST]) ); + } - if ( rotor_param.m_gotoxx_parameters.m_lo_direction == eDVBSatelliteRotorParameters::WEST ) - SiteLon = 360 - SiteLon; + int loops=0; - if (satDir == eDVBSatelliteRotorParameters::WEST ) - SatLon = 360 - SatLon; + if ( send_mask & 1 ) + ++loops; + if ( send_mask & 2 ) + ++loops; - eDebug("siteLatitude = %lf, siteLongitude = %lf, %lf degrees", SiteLat, SiteLon, SatLon ); - double satHourAngle = - calcSatHourangle( SatLon, SiteLat, SiteLon ); - eDebug("PolarmountHourAngle=%lf", satHourAngle ); + loops <<= di_param.m_repeats; - static int gotoXTable[10] = - { 0x00, 0x02, 0x03, 0x05, 0x06, 0x08, 0x0A, 0x0B, 0x0D, 0x0E }; + for ( int i = 0; i < loops;) // fill commands... + { + eDVBDiseqcCommand diseqc; + diseqc.len = 4; + diseqc.data[0] = i ? 0xE1 : 0xE0; + diseqc.data[1] = 0x10; + if ( (send_mask & 2) && (di_param.m_command_order & 4) ) + { + diseqc.data[2] = 0x39; + diseqc.data[3] = ucsw; + } + else if ( send_mask & 1 ) + { + diseqc.data[2] = 0x38; + diseqc.data[3] = csw; + } + else // no committed command confed.. so send uncommitted.. + { + diseqc.data[2] = 0x39; + diseqc.data[3] = ucsw; + } + sec_sequence.push_back( eSecCommand(eSecCommand::SEND_DISEQC, diseqc) ); - if (SiteLat >= 0) // Northern Hemisphere - { - int tmp=(int)round( fabs( 180 - satHourAngle ) * 10.0 ); - RotorCmd = (tmp/10)*0x10 + gotoXTable[ tmp % 10 ]; + i++; + if ( i < loops ) + { + int cmd=0; + if (diseqc.data[2] == 0x38 && (send_mask & 2)) + cmd=0x39; + else if (diseqc.data[2] == 0x39 && (send_mask & 1)) + cmd=0x38; + int tmp = m_params[DELAY_BETWEEN_DISEQC_REPEATS]; + if (cmd) + { + int delay = di_param.m_repeats ? (tmp - 54) / 2 : tmp; // standard says 100msek between two repeated commands + sec_sequence.push_back( eSecCommand(eSecCommand::SLEEP, delay) ); + diseqc.data[2]=cmd; + diseqc.data[3]=(cmd==0x38) ? csw : ucsw; + sec_sequence.push_back( eSecCommand(eSecCommand::SEND_DISEQC, diseqc) ); + ++i; + if ( i < loops ) + sec_sequence.push_back( eSecCommand(eSecCommand::SLEEP, delay ) ); + else + sec_sequence.push_back( eSecCommand(eSecCommand::SLEEP, m_params[DELAY_AFTER_LAST_DISEQC_CMD]) ); + } + else // delay 120msek when no command is in repeat gap + sec_sequence.push_back( eSecCommand(eSecCommand::SLEEP, tmp) ); + } + else + sec_sequence.push_back( eSecCommand(eSecCommand::SLEEP, m_params[DELAY_AFTER_LAST_DISEQC_CMD]) ); + } - if (satHourAngle < 180) // the east - RotorCmd |= 0xE000; - else // west - RotorCmd |= 0xD000; - } - else // Southern Hemisphere - { - if (satHourAngle < 180) // the east + if ( send_mask & 8 ) // toneburst at end of sequence { - int tmp=(int)round( fabs( satHourAngle ) * 10.0 ); - RotorCmd = (tmp/10)*0x10 + gotoXTable[ tmp % 10 ]; - RotorCmd |= 0xD000; - } - else // west - { - int tmp=(int)round( fabs( 360 - satHourAngle ) * 10.0 ); - RotorCmd = (tmp/10)*0x10 + gotoXTable[ tmp % 10 ]; - RotorCmd |= 0xE000; + sec_sequence.push_back( eSecCommand(eSecCommand::SEND_TONEBURST, di_param.m_toneburst_param) ); + sec_sequence.push_back( eSecCommand(eSecCommand::SLEEP, m_params[DELAY_AFTER_TONEBURST]) ); } } - eDebug("RotorCmd = %04x", RotorCmd); } - if ( RotorCmd != lastRotorCmd ) + + eDebug("RotorCmd %02x, lastRotorCmd %02x", RotorCmd, lastRotorCmd); + if ( RotorCmd != -1 && RotorCmd != lastRotorCmd ) { - if ( changed_burst || send_diseqc ) + eSecCommand::pair compare; + if (!send_mask) { - // override first voltage change - *(++(++sec_sequence.begin()))=eSecCommand(eSecCommand::SET_VOLTAGE, iDVBFrontend::voltage13); - // wait 1 second after first switch diseqc command - sec_sequence.push_back( eSecCommand(eSecCommand::SLEEP, 1000) ); - } - else // no other diseqc commands before - { - sec_sequence.push_back( eSecCommand(eSecCommand::SET_TONE, iDVBFrontend::toneOff) ); - sec_sequence.push_back( eSecCommand(eSecCommand::SLEEP, 15) ); // wait 15msec after tone change - eSecCommand::pair compare; - compare.voltage = voltage; compare.steps = +3; - sec_sequence.push_back( eSecCommand(eSecCommand::IF_VOLTAGE_GOTO, compare) ); // voltage already correct ? - sec_sequence.push_back( eSecCommand(eSecCommand::SET_VOLTAGE, iDVBFrontend::voltage13) ); - sec_sequence.push_back( eSecCommand(eSecCommand::SLEEP, 50) ); // wait 50msec after voltage change + compare.tone = iDVBFrontend::toneOff; + sec_sequence.push_back( eSecCommand(eSecCommand::IF_TONE_GOTO, compare) ); + sec_sequence.push_back( eSecCommand(eSecCommand::SET_TONE, iDVBFrontend::toneOff) ); + sec_sequence.push_back( eSecCommand(eSecCommand::SLEEP, m_params[DELAY_AFTER_CONT_TONE]) ); + + compare.voltage = iDVBFrontend::voltageOff; + compare.steps = +4; + // the next is a check if voltage is switched off.. then we first set a voltage :) + // else we set voltage after all diseqc stuff.. + sec_sequence.push_back( eSecCommand(eSecCommand::IF_NOT_VOLTAGE_GOTO, compare) ); + + if (rotor_param.m_inputpower_parameters.m_use) + sec_sequence.push_back( eSecCommand(eSecCommand::SET_VOLTAGE, VOLTAGE(18)) ); // set 18V for measure input power + else + sec_sequence.push_back( eSecCommand(eSecCommand::SET_VOLTAGE, VOLTAGE(13)) ); // in normal mode start turning with 13V + + sec_sequence.push_back( eSecCommand(eSecCommand::SLEEP, m_params[DELAY_AFTER_ENABLE_VOLTAGE_BEFORE_MOTOR_CMD]) ); // wait 750ms when voltage was disabled + sec_sequence.push_back( eSecCommand(eSecCommand::GOTO, +9) ); // no need to send stop rotor cmd and recheck voltage } + else + sec_sequence.push_back( eSecCommand(eSecCommand::SLEEP, m_params[DELAY_BETWEEN_SWITCH_AND_MOTOR_CMD]) ); // wait 700ms when diseqc changed eDVBDiseqcCommand diseqc; + diseqc.len = 3; + diseqc.data[0] = 0xE0; + diseqc.data[1] = 0x31; // positioner + diseqc.data[2] = 0x60; // stop + sec_sequence.push_back( eSecCommand(eSecCommand::IF_ROTORPOS_VALID_GOTO, +5) ); + sec_sequence.push_back( eSecCommand(eSecCommand::SEND_DISEQC, diseqc) ); + sec_sequence.push_back( eSecCommand(eSecCommand::SLEEP, 50) ); + sec_sequence.push_back( eSecCommand(eSecCommand::SEND_DISEQC, diseqc) ); + // wait 150msec after send rotor stop cmd + sec_sequence.push_back( eSecCommand(eSecCommand::SLEEP, m_params[DELAY_AFTER_MOTOR_STOP_CMD]) ); + diseqc.data[0] = 0xE0; diseqc.data[1] = 0x31; // positioner if ( useGotoXX ) @@ -375,23 +662,32 @@ RESULT eDVBSatelliteEquipmentControl::prepare(iDVBFrontend &frontend, FRONTENDPA diseqc.len = 4; diseqc.data[2] = 0x6B; // goto stored sat position diseqc.data[3] = RotorCmd; + diseqc.data[4] = 0x00; } if ( rotor_param.m_inputpower_parameters.m_use ) { // use measure rotor input power to detect rotor state eSecCommand::rotor cmd; + eSecCommand::pair compare; + compare.voltage = VOLTAGE(18); + compare.steps = +3; + sec_sequence.push_back( eSecCommand(eSecCommand::IF_VOLTAGE_GOTO, compare) ); + sec_sequence.push_back( eSecCommand(eSecCommand::SET_VOLTAGE, compare.voltage) ); // measure idle power values - sec_sequence.push_back( eSecCommand(eSecCommand::IF_IDLE_INPUTPOWER_AVAIL_GOTO, +8) ); // already measured? - sec_sequence.push_back( eSecCommand(eSecCommand::SLEEP, 50) ); // wait 50msec after voltage change - sec_sequence.push_back( eSecCommand(eSecCommand::MEASURE_IDLE_INPUTPOWER, 0) ); - sec_sequence.push_back( eSecCommand(eSecCommand::SET_VOLTAGE, iDVBFrontend::voltage18) ); - sec_sequence.push_back( eSecCommand(eSecCommand::SLEEP, 100) ); // wait 100msec before measure + sec_sequence.push_back( eSecCommand(eSecCommand::SLEEP, m_params[DELAY_AFTER_VOLTAGE_CHANGE_BEFORE_MEASURE_IDLE_INPUTPOWER]) ); // wait 150msec after voltage change sec_sequence.push_back( eSecCommand(eSecCommand::MEASURE_IDLE_INPUTPOWER, 1) ); - sec_sequence.push_back( eSecCommand(eSecCommand::SET_VOLTAGE, iDVBFrontend::voltage13) ); // back to lower voltage - sec_sequence.push_back( eSecCommand(eSecCommand::SLEEP, 50) ); // wait 50msec + compare.val = 1; + compare.steps = -2; + sec_sequence.push_back( eSecCommand(eSecCommand::IF_MEASURE_IDLE_WAS_NOT_OK_GOTO, compare) ); + sec_sequence.push_back( eSecCommand(eSecCommand::SET_VOLTAGE, VOLTAGE(13)) ); + sec_sequence.push_back( eSecCommand(eSecCommand::SLEEP, m_params[DELAY_AFTER_VOLTAGE_CHANGE_BEFORE_MEASURE_IDLE_INPUTPOWER]) ); // wait 150msec before measure + sec_sequence.push_back( eSecCommand(eSecCommand::MEASURE_IDLE_INPUTPOWER, 0) ); + compare.val = 0; + sec_sequence.push_back( eSecCommand(eSecCommand::IF_MEASURE_IDLE_WAS_NOT_OK_GOTO, compare) ); //////////////////////////// sec_sequence.push_back( eSecCommand(eSecCommand::SET_POWER_LIMITING_MODE, eSecCommand::modeStatic) ); - sec_sequence.push_back( eSecCommand(eSecCommand::SLEEP, 50) ); // wait 50msec after voltage change + sec_sequence.push_back( eSecCommand(eSecCommand::SET_ROTOR_DISEQC_RETRYS, m_params[MOTOR_COMMAND_RETRIES]) ); // 2 retries + sec_sequence.push_back( eSecCommand(eSecCommand::INVALIDATE_CURRENT_ROTORPARMS) ); sec_sequence.push_back( eSecCommand(eSecCommand::SEND_DISEQC, diseqc) ); sec_sequence.push_back( eSecCommand(eSecCommand::SET_TIMEOUT, 40) ); // 2 seconds rotor start timout // rotor start loop @@ -399,83 +695,154 @@ RESULT eDVBSatelliteEquipmentControl::prepare(iDVBFrontend &frontend, FRONTENDPA sec_sequence.push_back( eSecCommand(eSecCommand::MEASURE_RUNNING_INPUTPOWER) ); cmd.direction=1; // check for running rotor cmd.deltaA=rotor_param.m_inputpower_parameters.m_delta; - cmd.steps=+3; + cmd.steps=+5; cmd.okcount=0; sec_sequence.push_back( eSecCommand(eSecCommand::IF_INPUTPOWER_DELTA_GOTO, cmd ) ); // check if rotor has started - sec_sequence.push_back( eSecCommand(eSecCommand::IF_TIMEOUT_GOTO, +10 ) ); // timeout .. we assume now the rotor is already at the correct position + sec_sequence.push_back( eSecCommand(eSecCommand::IF_TIMEOUT_GOTO, +2 ) ); // timeout .. we assume now the rotor is already at the correct position sec_sequence.push_back( eSecCommand(eSecCommand::GOTO, -4) ); // goto loop start + sec_sequence.push_back( eSecCommand(eSecCommand::IF_NO_MORE_ROTOR_DISEQC_RETRYS_GOTO, +9 ) ); // timeout .. we assume now the rotor is already at the correct position + sec_sequence.push_back( eSecCommand(eSecCommand::GOTO, -8) ); // goto loop start //////////////////// - sec_sequence.push_back( eSecCommand(eSecCommand::SET_TIMEOUT, 2400) ); // 2 minutes running timeout - sec_sequence.push_back( eSecCommand(eSecCommand::SET_VOLTAGE, iDVBFrontend::voltage18) ); - sec_sequence.push_back( eSecCommand(eSecCommand::SET_POWER_LIMITING_MODE, eSecCommand::modeDynamic) ); + if (need_turn_fast(rotor_param.m_inputpower_parameters.m_turning_speed)) + sec_sequence.push_back( eSecCommand(eSecCommand::SET_VOLTAGE, VOLTAGE(18)) ); + sec_sequence.push_back( eSecCommand(eSecCommand::SET_TIMEOUT, m_params[MOTOR_RUNNING_TIMEOUT]*20) ); // 2 minutes running timeout // rotor running loop sec_sequence.push_back( eSecCommand(eSecCommand::SLEEP, 50) ); // wait 50msec sec_sequence.push_back( eSecCommand(eSecCommand::MEASURE_RUNNING_INPUTPOWER) ); cmd.direction=0; // check for stopped rotor - cmd.steps=+3; + cmd.steps=+4; sec_sequence.push_back( eSecCommand(eSecCommand::IF_INPUTPOWER_DELTA_GOTO, cmd ) ); sec_sequence.push_back( eSecCommand(eSecCommand::IF_TIMEOUT_GOTO, +3 ) ); // timeout ? this should never happen sec_sequence.push_back( eSecCommand(eSecCommand::GOTO, -4) ); // running loop start ///////////////////// sec_sequence.push_back( eSecCommand(eSecCommand::UPDATE_CURRENT_ROTORPARAMS) ); - frontend.setData(3, RotorCmd); - frontend.setData(4, sat.orbital_position); + sec_sequence.push_back( eSecCommand(eSecCommand::SET_POWER_LIMITING_MODE, eSecCommand::modeDynamic) ); } else - eFatal("rotor turning without inputpowermeasure not implemented yet"); + { // use normal turning mode + doSetVoltageToneFrontend=false; + doSetFrontend=false; + eSecCommand::rotor cmd; + eSecCommand::pair compare; + compare.voltage = VOLTAGE(13); + compare.steps = +3; + sec_sequence.push_back( eSecCommand(eSecCommand::IF_VOLTAGE_GOTO, compare) ); + sec_sequence.push_back( eSecCommand(eSecCommand::SET_VOLTAGE, compare.voltage) ); + sec_sequence.push_back( eSecCommand(eSecCommand::SLEEP, m_params[DELAY_AFTER_VOLTAGE_CHANGE_BEFORE_MOTOR_CMD]) ); // wait 150msec after voltage change + + sec_sequence.push_back( eSecCommand(eSecCommand::SET_POWER_LIMITING_MODE, eSecCommand::modeStatic) ); + sec_sequence.push_back( eSecCommand(eSecCommand::INVALIDATE_CURRENT_ROTORPARMS) ); + sec_sequence.push_back( eSecCommand(eSecCommand::SEND_DISEQC, diseqc) ); + + compare.voltage = voltage; + compare.steps = +3; + sec_sequence.push_back( eSecCommand(eSecCommand::IF_VOLTAGE_GOTO, compare) ); // correct final voltage? + sec_sequence.push_back( eSecCommand(eSecCommand::SLEEP, 2000) ); // wait 2 second before set high voltage + sec_sequence.push_back( eSecCommand(eSecCommand::SET_VOLTAGE, voltage) ); + + compare.tone = tone; + sec_sequence.push_back( eSecCommand(eSecCommand::IF_TONE_GOTO, compare) ); + sec_sequence.push_back( eSecCommand(eSecCommand::SET_TONE, tone) ); + sec_sequence.push_back( eSecCommand(eSecCommand::SLEEP, m_params[DELAY_AFTER_CONT_TONE]) ); + sec_sequence.push_back( eSecCommand(eSecCommand::SET_FRONTEND) ); + + cmd.direction=1; // check for running rotor + cmd.deltaA=0; + cmd.steps=+3; + cmd.okcount=0; + sec_sequence.push_back( eSecCommand(eSecCommand::SET_TIMEOUT, m_params[MOTOR_RUNNING_TIMEOUT]*4) ); // 2 minutes running timeout + sec_sequence.push_back( eSecCommand(eSecCommand::SLEEP, 250) ); // 250msec delay + sec_sequence.push_back( eSecCommand(eSecCommand::IF_TUNER_LOCKED_GOTO, cmd ) ); + sec_sequence.push_back( eSecCommand(eSecCommand::IF_TIMEOUT_GOTO, +3 ) ); + sec_sequence.push_back( eSecCommand(eSecCommand::GOTO, -3) ); // goto loop start + sec_sequence.push_back( eSecCommand(eSecCommand::UPDATE_CURRENT_ROTORPARAMS) ); + sec_sequence.push_back( eSecCommand(eSecCommand::SET_POWER_LIMITING_MODE, eSecCommand::modeDynamic) ); + } + frontend.setData(eDVBFrontend::NEW_ROTOR_CMD, RotorCmd); + frontend.setData(eDVBFrontend::NEW_ROTOR_POS, sat.orbital_position); } } } + else + csw = band; - eSecCommand::pair compare; - compare.voltage = voltage; - compare.steps = +3; - sec_sequence.push_back( eSecCommand(eSecCommand::IF_VOLTAGE_GOTO, compare) ); // voltage already correct ? - sec_sequence.push_back( eSecCommand(eSecCommand::SET_VOLTAGE, voltage) ); - sec_sequence.push_back( eSecCommand(eSecCommand::SLEEP, 10) ); + frontend.setData(eDVBFrontend::CSW, csw); + frontend.setData(eDVBFrontend::UCSW, ucsw); + frontend.setData(eDVBFrontend::TONEBURST, di_param.m_toneburst_param); - sec_sequence.push_back( eSecCommand(eSecCommand::SET_TONE, tone) ); - sec_sequence.push_back( eSecCommand(eSecCommand::SLEEP, 15) ); + if (doSetVoltageToneFrontend) + { + eSecCommand::pair compare; + compare.voltage = voltage; + compare.steps = +3; + sec_sequence.push_back( eSecCommand(eSecCommand::IF_VOLTAGE_GOTO, compare) ); // voltage already correct ? + sec_sequence.push_back( eSecCommand(eSecCommand::SET_VOLTAGE, voltage) ); + sec_sequence.push_back( eSecCommand(eSecCommand::SLEEP, m_params[DELAY_AFTER_FINAL_VOLTAGE_CHANGE]) ); + compare.tone = tone; + sec_sequence.push_back( eSecCommand(eSecCommand::IF_TONE_GOTO, compare) ); + sec_sequence.push_back( eSecCommand(eSecCommand::SET_TONE, tone) ); + sec_sequence.push_back( eSecCommand(eSecCommand::SLEEP, m_params[DELAY_AFTER_CONT_TONE]) ); + } + if (doSetFrontend) + { + sec_sequence.push_back( eSecCommand(eSecCommand::START_TUNE_TIMEOUT) ); + sec_sequence.push_back( eSecCommand(eSecCommand::SET_FRONTEND) ); + } frontend.setSecSequence(sec_sequence); return 0; } } - eDebug("found no satellite configuration for orbital position (%d)", sat.orbital_position ); - + eDebug("found no useable satellite configuration for orbital position (%d)", sat.orbital_position ); return -1; } RESULT eDVBSatelliteEquipmentControl::clear() { - for (int i=0; i < m_lnbidx; ++i) + eSecDebug("eDVBSatelliteEquipmentControl::clear()"); + for (int i=0; i <= m_lnbidx; ++i) { m_lnbs[i].m_satellites.clear(); - m_lnbs[i].tuner_mask = 0; + m_lnbs[i].slot_mask = 0; } m_lnbidx=-1; + + m_not_linked_slot_mask=0; + + //reset some tuner configuration + for (eSmartPtrList::iterator it(m_avail_frontends.begin()); it != m_avail_frontends.end(); ++it) + { + it->m_frontend->setData(eDVBFrontend::SATPOS_DEPENDS_PTR, -1); + it->m_frontend->setData(eDVBFrontend::LINKED_PREV_PTR, -1); + it->m_frontend->setData(eDVBFrontend::LINKED_NEXT_PTR, -1); + it->m_frontend->setData(eDVBFrontend::ROTOR_POS, -1); + it->m_frontend->setData(eDVBFrontend::ROTOR_CMD, -1); + } + return 0; } /* LNB Specific Parameters */ RESULT eDVBSatelliteEquipmentControl::addLNB() { - if ( m_lnbidx < (int)(sizeof(m_lnbs) / sizeof(eDVBSatelliteLNBParameters))) + if ( (m_lnbidx+1) < (int)(sizeof(m_lnbs) / sizeof(eDVBSatelliteLNBParameters))) m_curSat=m_lnbs[++m_lnbidx].m_satellites.end(); else { eDebug("no more LNB free... cnt is %d", m_lnbidx); return -ENOSPC; } + eSecDebug("eDVBSatelliteEquipmentControl::addLNB(%d)", m_lnbidx-1); return 0; } -RESULT eDVBSatelliteEquipmentControl::setLNBTunerMask(int tunermask) +RESULT eDVBSatelliteEquipmentControl::setLNBSlotMask(int slotmask) { + eSecDebug("eDVBSatelliteEquipmentControl::setLNBSlotMask(%d)", slotmask); if ( currentLNBValid() ) - m_lnbs[m_lnbidx].tuner_mask = tunermask; + m_lnbs[m_lnbidx].slot_mask = slotmask; else return -ENOENT; return 0; @@ -483,6 +850,7 @@ RESULT eDVBSatelliteEquipmentControl::setLNBTunerMask(int tunermask) RESULT eDVBSatelliteEquipmentControl::setLNBLOFL(int lofl) { + eSecDebug("eDVBSatelliteEquipmentControl::setLNBLOFL(%d)", lofl); if ( currentLNBValid() ) m_lnbs[m_lnbidx].m_lof_lo = lofl; else @@ -492,6 +860,7 @@ RESULT eDVBSatelliteEquipmentControl::setLNBLOFL(int lofl) RESULT eDVBSatelliteEquipmentControl::setLNBLOFH(int lofh) { + eSecDebug("eDVBSatelliteEquipmentControl::setLNBLOFH(%d)", lofh); if ( currentLNBValid() ) m_lnbs[m_lnbidx].m_lof_hi = lofh; else @@ -501,6 +870,7 @@ RESULT eDVBSatelliteEquipmentControl::setLNBLOFH(int lofh) RESULT eDVBSatelliteEquipmentControl::setLNBThreshold(int threshold) { + eSecDebug("eDVBSatelliteEquipmentControl::setLNBThreshold(%d)", threshold); if ( currentLNBValid() ) m_lnbs[m_lnbidx].m_lof_threshold = threshold; else @@ -510,6 +880,7 @@ RESULT eDVBSatelliteEquipmentControl::setLNBThreshold(int threshold) RESULT eDVBSatelliteEquipmentControl::setLNBIncreasedVoltage(bool onoff) { + eSecDebug("eDVBSatelliteEquipmentControl::setLNBIncreasedVoltage(%d)", onoff); if ( currentLNBValid() ) m_lnbs[m_lnbidx].m_increased_voltage = onoff; else @@ -520,6 +891,7 @@ RESULT eDVBSatelliteEquipmentControl::setLNBIncreasedVoltage(bool onoff) /* DiSEqC Specific Parameters */ RESULT eDVBSatelliteEquipmentControl::setDiSEqCMode(int diseqcmode) { + eSecDebug("eDVBSatelliteEquipmentControl::setDiSEqcMode(%d)", diseqcmode); if ( currentLNBValid() ) m_lnbs[m_lnbidx].m_diseqc_parameters.m_diseqc_mode = (eDVBSatelliteDiseqcParameters::t_diseqc_mode)diseqcmode; else @@ -529,6 +901,7 @@ RESULT eDVBSatelliteEquipmentControl::setDiSEqCMode(int diseqcmode) RESULT eDVBSatelliteEquipmentControl::setToneburst(int toneburst) { + eSecDebug("eDVBSatelliteEquipmentControl::setToneburst(%d)", toneburst); if ( currentLNBValid() ) m_lnbs[m_lnbidx].m_diseqc_parameters.m_toneburst_param = (eDVBSatelliteDiseqcParameters::t_toneburst_param)toneburst; else @@ -538,6 +911,7 @@ RESULT eDVBSatelliteEquipmentControl::setToneburst(int toneburst) RESULT eDVBSatelliteEquipmentControl::setRepeats(int repeats) { + eSecDebug("eDVBSatelliteEquipmentControl::setRepeats(%d)", repeats); if ( currentLNBValid() ) m_lnbs[m_lnbidx].m_diseqc_parameters.m_repeats=repeats; else @@ -547,6 +921,7 @@ RESULT eDVBSatelliteEquipmentControl::setRepeats(int repeats) RESULT eDVBSatelliteEquipmentControl::setCommittedCommand(int command) { + eSecDebug("eDVBSatelliteEquipmentControl::setCommittedCommand(%d)", command); if ( currentLNBValid() ) m_lnbs[m_lnbidx].m_diseqc_parameters.m_committed_cmd=command; else @@ -556,6 +931,7 @@ RESULT eDVBSatelliteEquipmentControl::setCommittedCommand(int command) RESULT eDVBSatelliteEquipmentControl::setUncommittedCommand(int command) { + eSecDebug("eDVBSatelliteEquipmentControl::setUncommittedCommand(%d)", command); if ( currentLNBValid() ) m_lnbs[m_lnbidx].m_diseqc_parameters.m_uncommitted_cmd = command; else @@ -565,6 +941,7 @@ RESULT eDVBSatelliteEquipmentControl::setUncommittedCommand(int command) RESULT eDVBSatelliteEquipmentControl::setCommandOrder(int order) { + eSecDebug("eDVBSatelliteEquipmentControl::setCommandOrder(%d)", order); if ( currentLNBValid() ) m_lnbs[m_lnbidx].m_diseqc_parameters.m_command_order=order; else @@ -574,6 +951,7 @@ RESULT eDVBSatelliteEquipmentControl::setCommandOrder(int order) RESULT eDVBSatelliteEquipmentControl::setFastDiSEqC(bool onoff) { + eSecDebug("eDVBSatelliteEquipmentControl::setFastDiSEqc(%d)", onoff); if ( currentLNBValid() ) m_lnbs[m_lnbidx].m_diseqc_parameters.m_use_fast=onoff; else @@ -583,6 +961,7 @@ RESULT eDVBSatelliteEquipmentControl::setFastDiSEqC(bool onoff) RESULT eDVBSatelliteEquipmentControl::setSeqRepeat(bool onoff) { + eSecDebug("eDVBSatelliteEquipmentControl::setSeqRepeat(%d)", onoff); if ( currentLNBValid() ) m_lnbs[m_lnbidx].m_diseqc_parameters.m_seq_repeat = onoff; else @@ -593,6 +972,7 @@ RESULT eDVBSatelliteEquipmentControl::setSeqRepeat(bool onoff) /* Rotor Specific Parameters */ RESULT eDVBSatelliteEquipmentControl::setLongitude(float longitude) { + eSecDebug("eDVBSatelliteEquipmentControl::setLongitude(%f)", longitude); if ( currentLNBValid() ) m_lnbs[m_lnbidx].m_rotor_parameters.m_gotoxx_parameters.m_longitude=longitude; else @@ -602,6 +982,7 @@ RESULT eDVBSatelliteEquipmentControl::setLongitude(float longitude) RESULT eDVBSatelliteEquipmentControl::setLatitude(float latitude) { + eSecDebug("eDVBSatelliteEquipmentControl::setLatitude(%f)", latitude); if ( currentLNBValid() ) m_lnbs[m_lnbidx].m_rotor_parameters.m_gotoxx_parameters.m_latitude=latitude; else @@ -611,6 +992,7 @@ RESULT eDVBSatelliteEquipmentControl::setLatitude(float latitude) RESULT eDVBSatelliteEquipmentControl::setLoDirection(int direction) { + eSecDebug("eDVBSatelliteEquipmentControl::setLoDirection(%d)", direction); if ( currentLNBValid() ) m_lnbs[m_lnbidx].m_rotor_parameters.m_gotoxx_parameters.m_lo_direction=direction; else @@ -620,6 +1002,7 @@ RESULT eDVBSatelliteEquipmentControl::setLoDirection(int direction) RESULT eDVBSatelliteEquipmentControl::setLaDirection(int direction) { + eSecDebug("eDVBSatelliteEquipmentControl::setLaDirection(%d)", direction); if ( currentLNBValid() ) m_lnbs[m_lnbidx].m_rotor_parameters.m_gotoxx_parameters.m_la_direction=direction; else @@ -629,6 +1012,7 @@ RESULT eDVBSatelliteEquipmentControl::setLaDirection(int direction) RESULT eDVBSatelliteEquipmentControl::setUseInputpower(bool onoff) { + eSecDebug("eDVBSatelliteEquipmentControl::setUseInputpower(%d)", onoff); if ( currentLNBValid() ) m_lnbs[m_lnbidx].m_rotor_parameters.m_inputpower_parameters.m_use=onoff; else @@ -638,6 +1022,7 @@ RESULT eDVBSatelliteEquipmentControl::setUseInputpower(bool onoff) RESULT eDVBSatelliteEquipmentControl::setInputpowerDelta(int delta) { + eSecDebug("eDVBSatelliteEquipmentControl::setInputpowerDelta(%d)", delta); if ( currentLNBValid() ) m_lnbs[m_lnbidx].m_rotor_parameters.m_inputpower_parameters.m_delta=delta; else @@ -648,6 +1033,7 @@ RESULT eDVBSatelliteEquipmentControl::setInputpowerDelta(int delta) /* Satellite Specific Parameters */ RESULT eDVBSatelliteEquipmentControl::addSatellite(int orbital_position) { + eSecDebug("eDVBSatelliteEquipmentControl::addSatellite(%d)", orbital_position); if ( currentLNBValid() ) { std::map::iterator it = @@ -673,6 +1059,7 @@ RESULT eDVBSatelliteEquipmentControl::addSatellite(int orbital_position) RESULT eDVBSatelliteEquipmentControl::setVoltageMode(int mode) { + eSecDebug("eDVBSatelliteEquipmentControl::setVoltageMode(%d)", mode); if ( currentLNBValid() && m_curSat != m_lnbs[m_lnbidx].m_satellites.end() ) m_curSat->second.m_voltage_mode = (eDVBSatelliteSwitchParameters::t_voltage_mode)mode; else @@ -683,6 +1070,7 @@ RESULT eDVBSatelliteEquipmentControl::setVoltageMode(int mode) RESULT eDVBSatelliteEquipmentControl::setToneMode(int mode) { + eSecDebug("eDVBSatelliteEquipmentControl::setToneMode(%d)", mode); if ( currentLNBValid() ) { if ( m_curSat != m_lnbs[m_lnbidx].m_satellites.end() ) @@ -697,6 +1085,7 @@ RESULT eDVBSatelliteEquipmentControl::setToneMode(int mode) RESULT eDVBSatelliteEquipmentControl::setRotorPosNum(int rotor_pos_num) { + eSecDebug("eDVBSatelliteEquipmentControl::setRotorPosNum(%d)", rotor_pos_num); if ( currentLNBValid() ) { if ( m_curSat != m_lnbs[m_lnbidx].m_satellites.end() ) @@ -708,3 +1097,209 @@ RESULT eDVBSatelliteEquipmentControl::setRotorPosNum(int rotor_pos_num) return -ENOENT; return 0; } + +RESULT eDVBSatelliteEquipmentControl::setRotorTurningSpeed(int speed) +{ + eSecDebug("eDVBSatelliteEquipmentControl::setRotorTurningSpeed(%d)", speed); + if ( currentLNBValid() ) + m_lnbs[m_lnbidx].m_rotor_parameters.m_inputpower_parameters.m_turning_speed = speed; + else + return -ENOENT; + return 0; +} + +struct sat_compare +{ + int orb_pos, lofl, lofh; + sat_compare(int o, int lofl, int lofh) + :orb_pos(o), lofl(lofl), lofh(lofh) + {} + sat_compare(const sat_compare &x) + :orb_pos(x.orb_pos), lofl(x.lofl), lofh(x.lofh) + {} + bool operator < (const sat_compare & cmp) const + { + if (orb_pos == cmp.orb_pos) + { + if ( abs(lofl-cmp.lofl) < 200000 ) + { + if (abs(lofh-cmp.lofh) < 200000) + return false; + return lofh::iterator it(m_avail_frontends.begin()); it != m_avail_frontends.end(); ++it, ++cnt) + { + if (cnt == tu1) + p1 = *it; + else if (cnt == tu2) + p2 = *it; + } + + if (p1 && p2) + { + // check for linked tuners + + do + { + int tmp; + p1->m_frontend->getData(eDVBFrontend::LINKED_PREV_PTR, tmp); + if (tmp != -1) + p1 = (eDVBRegisteredFrontend*)tmp; + else + break; + } + while (true); + + do + { + int tmp; + p2->m_frontend->getData(eDVBFrontend::LINKED_PREV_PTR, tmp); + if (tmp != -1) + p2 = (eDVBRegisteredFrontend*)tmp; + else + break; + } + while (true); + + if (p1 != p2) + { + int tmp1=-1; + int tmp2=-1; + // check for rotor dependency + p1->m_frontend->getData(eDVBFrontend::SATPOS_DEPENDS_PTR, tmp1); + if (tmp1 != -1) + p1 = (eDVBRegisteredFrontend*)tmp1; + p2->m_frontend->getData(eDVBFrontend::SATPOS_DEPENDS_PTR, tmp2); + if (tmp2 != -1) + p2 = (eDVBRegisteredFrontend*)tmp2; + if (p1 != p2) + { + int tu1_mask = 1 << p1->m_frontend->getSlotID(), + tu2_mask = 1 << p2->m_frontend->getSlotID(); + std::set tu1sats, tu2sats; + std::list tu1difference, tu2difference; + std::insert_iterator > insert1(tu1difference, tu1difference.begin()), + insert2(tu2difference, tu2difference.begin()); + for (int idx=0; idx <= m_lnbidx; ++idx ) + { + eDVBSatelliteLNBParameters &lnb_param = m_lnbs[idx]; + for (std::map::iterator sit(lnb_param.m_satellites.begin()); + sit != lnb_param.m_satellites.end(); ++sit) + { + if ( lnb_param.slot_mask & tu1_mask ) + tu1sats.insert(sat_compare(sit->first, lnb_param.m_lof_lo, lnb_param.m_lof_hi)); + if ( lnb_param.slot_mask & tu2_mask ) + tu2sats.insert(sat_compare(sit->first, lnb_param.m_lof_lo, lnb_param.m_lof_hi)); + } + } + std::set_difference(tu1sats.begin(), tu1sats.end(), + tu2sats.begin(), tu2sats.end(), + insert1); + std::set_difference(tu2sats.begin(), tu2sats.end(), + tu1sats.begin(), tu1sats.end(), + insert2); + if (!tu1sats.empty() || !tu2sats.empty()) + { + int idx=0; + ret = PyList_New(2+tu1difference.size()+tu2difference.size()); + + PyList_SET_ITEM(ret, idx++, PyInt_FromLong(tu1difference.size())); + for(std::list::iterator it(tu1difference.begin()); it != tu1difference.end(); ++it) + PyList_SET_ITEM(ret, idx++, PyInt_FromLong(it->orb_pos)); + + PyList_SET_ITEM(ret, idx++, PyInt_FromLong(tu2difference.size())); + for(std::list::iterator it(tu2difference.begin()); it != tu2difference.end(); ++it) + PyList_SET_ITEM(ret, idx++, PyInt_FromLong(it->orb_pos)); + } + } + } + } + } + if (!ret) + { + ret = PyList_New(2); + PyList_SET_ITEM(ret, 0, PyInt_FromLong(0)); + PyList_SET_ITEM(ret, 1, PyInt_FromLong(0)); + } + return ret; +} + +RESULT eDVBSatelliteEquipmentControl::setTunerLinked(int tu1, int tu2) +{ + eSecDebug("eDVBSatelliteEquipmentControl::setTunerLinked(%d, %d)", tu1, tu2); + if (tu1 != tu2) + { + eDVBRegisteredFrontend *p1=NULL, *p2=NULL; + + int cnt=0; + for (eSmartPtrList::iterator it(m_avail_frontends.begin()); it != m_avail_frontends.end(); ++it, ++cnt) + { + if (cnt == tu1) + p1 = *it; + else if (cnt == tu2) + p2 = *it; + } + if (p1 && p2) + { + p1->m_frontend->setData(eDVBFrontend::LINKED_PREV_PTR, (int)p2); + p2->m_frontend->setData(eDVBFrontend::LINKED_NEXT_PTR, (int)p1); + return 0; + } + } + return -1; +} + +RESULT eDVBSatelliteEquipmentControl::setTunerDepends(int tu1, int tu2) +{ + eSecDebug("eDVBSatelliteEquipmentControl::setTunerDepends(%d, %d)", tu1, tu2); + if (tu1 == tu2) + return -1; + + eDVBRegisteredFrontend *p1=NULL, *p2=NULL; + + int cnt=0; + for (eSmartPtrList::iterator it(m_avail_frontends.begin()); it != m_avail_frontends.end(); ++it, ++cnt) + { + if (cnt == tu1) + p1 = *it; + else if (cnt == tu2) + p2 = *it; + } + if (p1 && p2) + { + p1->m_frontend->setData(eDVBFrontend::SATPOS_DEPENDS_PTR, (int)p2); + p2->m_frontend->setData(eDVBFrontend::SATPOS_DEPENDS_PTR, (int)p1); + return 0; + } + return -1; +} + +void eDVBSatelliteEquipmentControl::setSlotNotLinked(int slot_no) +{ + eSecDebug("eDVBSatelliteEquipmentControl::setSlotNotLinked(%d)", slot_no); + m_not_linked_slot_mask |= (1 << slot_no); +} + +bool eDVBSatelliteEquipmentControl::isRotorMoving() +{ + return m_rotorMoving; +} + +void eDVBSatelliteEquipmentControl::setRotorMoving(bool b) +{ + m_rotorMoving=b; +}