X-Git-Url: https://git.cweiske.de/enigma2.git/blobdiff_plain/58e983040ccc2e6a0bda18430342142f7932fd26..ea33c2a4181fc803b23830feba68bebe0d9f0852:/lib/dvb/sec.cpp diff --git a/lib/dvb/sec.cpp b/lib/dvb/sec.cpp index 751a5453..851e9b1d 100644 --- a/lib/dvb/sec.cpp +++ b/lib/dvb/sec.cpp @@ -37,81 +37,11 @@ void eDVBSatelliteEquipmentControl::setParam(int param, int value) } eDVBSatelliteEquipmentControl::eDVBSatelliteEquipmentControl(eSmartPtrList &avail_frontends, eSmartPtrList &avail_simulate_frontends) - :m_lnbidx(-1), m_curSat(m_lnbs[0].m_satellites.end()), m_avail_frontends(avail_frontends), m_avail_simulate_frontends(avail_simulate_frontends), m_rotorMoving(false) + :m_lnbidx((sizeof(m_lnbs) / sizeof(eDVBSatelliteLNBParameters))-1), m_curSat(m_lnbs[0].m_satellites.end()), m_avail_frontends(avail_frontends), m_avail_simulate_frontends(avail_simulate_frontends), m_rotorMoving(0) { if (!instance) instance = this; - clear(); - -// ASTRA - addLNB(); - setLNBSlotMask(3); - setLNBLOFL(9750000); - setLNBThreshold(11700000); - setLNBLOFH(10607000); - setDiSEqCMode(eDVBSatelliteDiseqcParameters::V1_0); - setToneburst(eDVBSatelliteDiseqcParameters::NO); - setRepeats(0); - setCommittedCommand(eDVBSatelliteDiseqcParameters::BB); - setCommandOrder(0); // committed, toneburst - setFastDiSEqC(true); - setSeqRepeat(false); - addSatellite(192); - setVoltageMode(eDVBSatelliteSwitchParameters::HV); - setToneMode(eDVBSatelliteSwitchParameters::HILO); - -// Hotbird - addLNB(); - setLNBSlotMask(3); - setLNBLOFL(9750000); - setLNBThreshold(11700000); - setLNBLOFH(10600000); - setDiSEqCMode(eDVBSatelliteDiseqcParameters::V1_0); - setToneburst(eDVBSatelliteDiseqcParameters::NO); - setRepeats(0); - setCommittedCommand(eDVBSatelliteDiseqcParameters::AB); - setCommandOrder(0); // committed, toneburst - setFastDiSEqC(true); - setSeqRepeat(false); - addSatellite(130); - setVoltageMode(eDVBSatelliteSwitchParameters::HV); - setToneMode(eDVBSatelliteSwitchParameters::HILO); - -// Rotor - addLNB(); - setLNBSlotMask(3); - setLNBLOFL(9750000); - setLNBThreshold(11700000); - setLNBLOFH(10600000); - setDiSEqCMode(eDVBSatelliteDiseqcParameters::V1_2); - setToneburst(eDVBSatelliteDiseqcParameters::NO); - setRepeats(0); - setCommittedCommand(eDVBSatelliteDiseqcParameters::AA); - setCommandOrder(0); // committed, toneburst - setFastDiSEqC(true); - setSeqRepeat(false); - setLaDirection(eDVBSatelliteRotorParameters::NORTH); - setLoDirection(eDVBSatelliteRotorParameters::EAST); - setLatitude(51.017); - setLongitude(8.683); - setUseInputpower(true); - setInputpowerDelta(50); - - addSatellite(235); - setVoltageMode(eDVBSatelliteSwitchParameters::HV); - setToneMode(eDVBSatelliteSwitchParameters::HILO); - setRotorPosNum(0); - - addSatellite(284); - setVoltageMode(eDVBSatelliteSwitchParameters::HV); - setToneMode(eDVBSatelliteSwitchParameters::HILO); - setRotorPosNum(0); - - addSatellite(420); - setVoltageMode(eDVBSatelliteSwitchParameters::HV); - setToneMode(eDVBSatelliteSwitchParameters::HILO); - setRotorPosNum(1); // stored pos 1 } #define eSecDebugNoSimulate(x...) \ @@ -130,6 +60,44 @@ int eDVBSatelliteEquipmentControl::canTune(const eDVBFrontendParametersSatellite bool simulate = ((eDVBFrontend*)fe)->is_simulate(); bool direct_connected = m_not_linked_slot_mask & slot_id; int score=0, satcount=0; + long linked_prev_ptr=-1, linked_next_ptr=-1, linked_csw=-1, linked_ucsw=-1, linked_toneburst=-1, + fe_satpos_depends_ptr=-1, fe_rotor_pos=-1; + bool linked_in_use = false; + + eSecDebugNoSimulate("direct_connected %d", !!direct_connected); + + fe->getData(eDVBFrontend::LINKED_PREV_PTR, linked_prev_ptr); + fe->getData(eDVBFrontend::LINKED_NEXT_PTR, linked_next_ptr); + fe->getData(eDVBFrontend::SATPOS_DEPENDS_PTR, fe_satpos_depends_ptr); + + // first we search the linkage base frontend and check if any tuner in prev direction is used + while (linked_prev_ptr != -1) + { + eDVBRegisteredFrontend *linked_fe = (eDVBRegisteredFrontend*) linked_prev_ptr; + if (linked_fe->m_inuse) + linked_in_use = true; + fe = linked_fe->m_frontend; + linked_fe->m_frontend->getData(eDVBFrontend::LINKED_PREV_PTR, (long&)linked_prev_ptr); + } + + fe->getData(eDVBFrontend::ROTOR_POS, fe_rotor_pos); + + // now check also the linked tuners is in use + while (!linked_in_use && linked_next_ptr != -1) + { + eDVBRegisteredFrontend *linked_fe = (eDVBRegisteredFrontend*) linked_next_ptr; + if (linked_fe->m_inuse) + linked_in_use = true; + linked_fe->m_frontend->getData(eDVBFrontend::LINKED_NEXT_PTR, (long&)linked_next_ptr); + } + + // when a linked in use tuner is found we get the tuner data... + if (linked_in_use) + { + fe->getData(eDVBFrontend::CSW, linked_csw); + fe->getData(eDVBFrontend::UCSW, linked_ucsw); + fe->getData(eDVBFrontend::TONEBURST, linked_toneburst); + } if (highest_score_lnb) *highest_score_lnb = -1; @@ -140,7 +108,10 @@ int eDVBSatelliteEquipmentControl::canTune(const eDVBFrontendParametersSatellite { bool rotor=false; eDVBSatelliteLNBParameters &lnb_param = m_lnbs[idx]; - if ( lnb_param.slot_mask & slot_id ) // lnb for correct tuner? + bool is_unicable = lnb_param.SatCR_idx != -1; + bool is_unicable_position_switch = lnb_param.SatCR_positions > 1; + + if ( lnb_param.m_slot_mask & slot_id ) // lnb for correct tuner? { int ret = 0; eDVBSatelliteDiseqcParameters &di_param = lnb_param.m_diseqc_parameters; @@ -155,21 +126,17 @@ int eDVBSatelliteEquipmentControl::canTune(const eDVBFrontendParametersSatellite { bool diseqc=false; long band=0, - linked_prev_ptr=-1, - linked_next_ptr=-1, - satpos_depends_ptr=-1, + satpos_depends_ptr=fe_satpos_depends_ptr, csw = di_param.m_committed_cmd, ucsw = di_param.m_uncommitted_cmd, toneburst = di_param.m_toneburst_param, - curRotorPos; + rotor_pos = fe_rotor_pos; eSecDebugNoSimulate("sat %d found", sat.orbital_position); - fe->getData(eDVBFrontend::LINKED_PREV_PTR, linked_prev_ptr); - fe->getData(eDVBFrontend::SATPOS_DEPENDS_PTR, satpos_depends_ptr); if ( sat.frequency > lnb_param.m_lof_threshold ) band |= 1; - if (!(sat.polarisation & eDVBFrontendParametersSatellite::Polarisation::Vertical)) + if (!(sat.polarisation & eDVBFrontendParametersSatellite::Polarisation_Vertical)) band |= 2; if (di_param.m_diseqc_mode >= eDVBSatelliteDiseqcParameters::V1_0) @@ -184,7 +151,7 @@ int eDVBSatelliteEquipmentControl::canTune(const eDVBFrontendParametersSatellite if ( di_param.m_diseqc_mode == eDVBSatelliteDiseqcParameters::V1_2 ) // ROTOR rotor = true; - ret=10000; + ret = 10000; } else { @@ -192,111 +159,71 @@ int eDVBSatelliteEquipmentControl::canTune(const eDVBFrontendParametersSatellite ret = 15000; } + if (sat.no_rotor_command_on_tune && !rotor) { + eSecDebugNoSimulate("no rotor but no_rotor_command_on_tune is set.. ignore lnb %d", idx); + continue; + } + eSecDebugNoSimulate("ret1 %d", ret); - if (direct_connected) // frontend with direct connection? + if (linked_in_use && !is_unicable) { - long ocsw = -1, - oucsw = -1, - oToneburst = -1; - eSecDebugNoSimulate("direct"); - fe->getData(eDVBFrontend::ROTOR_POS, curRotorPos); - fe->getData(eDVBFrontend::LINKED_NEXT_PTR, linked_next_ptr); - fe->getData(eDVBFrontend::CSW, ocsw); - fe->getData(eDVBFrontend::UCSW, oucsw); - fe->getData(eDVBFrontend::TONEBURST, oToneburst); - while (ret && linked_prev_ptr != -1) // check for linked tuners.. + // compare tuner data + if ( (csw != linked_csw) || + ( diseqc && (ucsw != linked_ucsw || toneburst != linked_toneburst) ) || + ( rotor && rotor_pos != sat.orbital_position ) ) { - eDVBRegisteredFrontend *linked_fe = (eDVBRegisteredFrontend*) linked_prev_ptr; - if (linked_fe->m_inuse) - { - if ( (csw != ocsw) || - ( diseqc && (ucsw != oucsw || toneburst != oToneburst) ) || - ( rotor && curRotorPos != sat.orbital_position ) ) - { - ret=0; - } - } - linked_fe->m_frontend->getData(eDVBFrontend::LINKED_PREV_PTR, (long&)linked_prev_ptr); + ret = 0; } + else + ret += 15; eSecDebugNoSimulate("ret2 %d", ret); - while (ret && linked_next_ptr != -1) // check for linked tuners.. - { - eDVBRegisteredFrontend *linked_fe = (eDVBRegisteredFrontend*) linked_next_ptr; - if (linked_fe->m_inuse) - { - if ( (csw != ocsw) || - ( diseqc && (ucsw != oucsw || toneburst != oToneburst) ) || - ( rotor && curRotorPos != sat.orbital_position ) ) - { - ret=0; - } - } - linked_fe->m_frontend->getData(eDVBFrontend::LINKED_NEXT_PTR, (long&)linked_next_ptr); - } - eSecDebugNoSimulate("ret3 %d", ret); } - else // linked frontend.. + else if ((satpos_depends_ptr != -1) && !(is_unicable && is_unicable_position_switch)) { - long ocsw = -1, - oucsw = -1, - oToneburst = -1; - while (linked_prev_ptr != -1) + eSecDebugNoSimulate("satpos depends"); + eDVBRegisteredFrontend *satpos_depends_to_fe = (eDVBRegisteredFrontend*) satpos_depends_ptr; + if (direct_connected) // current fe is direct connected.. (can turn the rotor) { - eDVBRegisteredFrontend *linked_fe = (eDVBRegisteredFrontend*) linked_prev_ptr; - linked_fe->m_frontend->getData(eDVBFrontend::LINKED_PREV_PTR, (long&)linked_prev_ptr); - if (linked_prev_ptr == -1) + if (satpos_depends_to_fe->m_inuse) // if the dependent frontend is in use? { - iDVBFrontend *sec_fe = linked_fe->m_frontend; - sec_fe->getData(eDVBFrontend::ROTOR_POS, curRotorPos); - if (linked_fe->m_inuse) - { - sec_fe->getData(eDVBFrontend::CSW, ocsw); - sec_fe->getData(eDVBFrontend::UCSW, oucsw); - sec_fe->getData(eDVBFrontend::TONEBURST, oToneburst); - eSecDebug("(%ld != %ld) || \n(%d && (%ld != %ld || %ld != %ld) ) ||\n( %d && %ld != %d ) )", - csw, ocsw, diseqc, ucsw, oucsw, toneburst, oToneburst, rotor, curRotorPos, sat.orbital_position); - if ( (csw != ocsw) || - ( diseqc && (ucsw != oucsw || toneburst != oToneburst) ) || - ( rotor && curRotorPos != sat.orbital_position ) ) - { - ret=0; - } - } + if (!rotor || rotor_pos != sat.orbital_position) // new orbital position not equal to current orbital pos? + ret = 0; + else + ret += 10; } + eSecDebugNoSimulate("ret3 %d", ret); } - eSecDebugNoSimulate("ret4 %d", ret); - } - - if (ret) - if (satpos_depends_ptr != -1) + else // current fe is dependent of another tuner ... (so this fe can't turn the rotor!) { - eSecDebugNoSimulate("satpos depends"); - eDVBRegisteredFrontend *satpos_depends_to_fe = (eDVBRegisteredFrontend*) satpos_depends_ptr; - if ( satpos_depends_to_fe->m_inuse ) + // get current orb pos of the tuner with rotor connection + satpos_depends_to_fe->m_frontend->getData(eDVBFrontend::ROTOR_POS, rotor_pos); + if (!rotor || rotor_pos == -1 /* we dont know the rotor position yet */ + || rotor_pos != sat.orbital_position ) // not the same orbital position? { - if (!direct_connected) - satpos_depends_to_fe->m_frontend->getData(eDVBFrontend::ROTOR_POS, curRotorPos); - if (!rotor || curRotorPos != sat.orbital_position) - ret=0; + ret = 0; } - eSecDebugNoSimulate("ret5 %d", ret); } + eSecDebugNoSimulate("ret4 %d", ret); + } - if (ret && rotor && curRotorPos != -1) - ret -= abs(curRotorPos-sat.orbital_position); + if (ret && rotor && rotor_pos != -1) + ret -= abs(rotor_pos-sat.orbital_position); - eSecDebugNoSimulate("ret6 %d", ret); + eSecDebugNoSimulate("ret5 %d", ret); - if (ret) + if (ret && !is_unicable) { int lof = sat.frequency > lnb_param.m_lof_threshold ? lnb_param.m_lof_hi : lnb_param.m_lof_lo; int tuner_freq = abs(sat.frequency - lof); if (tuner_freq < 900000 || tuner_freq > 2200000) - ret=0; + ret = 0; } + if (ret && lnb_param.m_prio != -1) + ret = lnb_param.m_prio; + eSecDebugNoSimulate("ret %d, score old %d", ret, score); if (ret > score) { @@ -309,7 +236,12 @@ int eDVBSatelliteEquipmentControl::canTune(const eDVBFrontendParametersSatellite } } if (score && satcount) - score -= (satcount-1); + { + if (score > (satcount-1)) + score -= (satcount-1); + else + score = 1; // min score + } if (score && direct_connected) score += 5; // increase score for tuners with direct sat connection eSecDebugNoSimulate("final score %d", score); @@ -367,10 +299,10 @@ RESULT eDVBSatelliteEquipmentControl::prepare(iDVBFrontend &frontend, FRONTENDPA lnb_param.m_satellites.find(sat.orbital_position); if ( sit != lnb_param.m_satellites.end()) { + eSecCommandList sec_sequence; eDVBSatelliteSwitchParameters &sw_param = sit->second; bool doSetFrontend = true; bool doSetVoltageToneFrontend = true; - bool sendDiSEqC = false; bool forceChanged = false; bool needDiSEqCReset = false; long band=0, @@ -390,6 +322,15 @@ RESULT eDVBSatelliteEquipmentControl::prepare(iDVBFrontend &frontend, FRONTENDPA eDVBSatelliteDiseqcParameters::t_diseqc_mode diseqc_mode = di_param.m_diseqc_mode; eDVBSatelliteSwitchParameters::t_voltage_mode voltage_mode = sw_param.m_voltage_mode; bool diseqc13V = voltage_mode == eDVBSatelliteSwitchParameters::HV_13; + bool is_unicable = lnb_param.SatCR_idx != -1; + + bool useGotoXX = false; + int RotorCmd=-1; + int send_mask = 0; + + lnb_param.guard_offset = 0; //HACK + + frontend.setData(eDVBFrontend::SATCR, lnb_param.SatCR_idx); if (diseqc13V) voltage_mode = eDVBSatelliteSwitchParameters::HV; @@ -429,35 +370,53 @@ RESULT eDVBSatelliteEquipmentControl::prepare(iDVBFrontend &frontend, FRONTENDPA if ( sat.frequency > lnb_param.m_lof_threshold ) band |= 1; - - if (band&1) - parm.FREQUENCY = sat.frequency - lnb_param.m_lof_hi; - else - parm.FREQUENCY = sat.frequency - lnb_param.m_lof_lo; - - parm.FREQUENCY = abs(parm.FREQUENCY); - - frontend.setData(eDVBFrontend::FREQ_OFFSET, sat.frequency - parm.FREQUENCY); - - if (!(sat.polarisation & eDVBFrontendParametersSatellite::Polarisation::Vertical)) + if (!(sat.polarisation & eDVBFrontendParametersSatellite::Polarisation_Vertical)) band |= 2; - if ( voltage_mode == eDVBSatelliteSwitchParameters::_14V - || ( sat.polarisation & eDVBFrontendParametersSatellite::Polarisation::Vertical - && voltage_mode == eDVBSatelliteSwitchParameters::HV ) ) - voltage = VOLTAGE(13); - else if ( voltage_mode == eDVBSatelliteSwitchParameters::_18V - || ( !(sat.polarisation & eDVBFrontendParametersSatellite::Polarisation::Vertical) - && voltage_mode == eDVBSatelliteSwitchParameters::HV ) ) - voltage = VOLTAGE(18); - if ( (sw_param.m_22khz_signal == eDVBSatelliteSwitchParameters::ON) - || ( sw_param.m_22khz_signal == eDVBSatelliteSwitchParameters::HILO && (band&1) ) ) - tone = iDVBFrontend::toneOn; - else if ( (sw_param.m_22khz_signal == eDVBSatelliteSwitchParameters::OFF) - || ( sw_param.m_22khz_signal == eDVBSatelliteSwitchParameters::HILO && !(band&1) ) ) - tone = iDVBFrontend::toneOff; + int lof = (band&1)?lnb_param.m_lof_hi:lnb_param.m_lof_lo; - eSecCommandList sec_sequence; + if(!is_unicable) + { + // calc Frequency + int local= abs(sat.frequency + - lof); + parm.FREQUENCY = ((((local * 2) / 125) + 1) / 2) * 125; + frontend.setData(eDVBFrontend::FREQ_OFFSET, sat.frequency - parm.FREQUENCY); + + if ( voltage_mode == eDVBSatelliteSwitchParameters::_14V + || ( sat.polarisation & eDVBFrontendParametersSatellite::Polarisation_Vertical + && voltage_mode == eDVBSatelliteSwitchParameters::HV ) ) + voltage = VOLTAGE(13); + else if ( voltage_mode == eDVBSatelliteSwitchParameters::_18V + || ( !(sat.polarisation & eDVBFrontendParametersSatellite::Polarisation_Vertical) + && voltage_mode == eDVBSatelliteSwitchParameters::HV ) ) + voltage = VOLTAGE(18); + if ( (sw_param.m_22khz_signal == eDVBSatelliteSwitchParameters::ON) + || ( sw_param.m_22khz_signal == eDVBSatelliteSwitchParameters::HILO && (band&1) ) ) + tone = iDVBFrontend::toneOn; + else if ( (sw_param.m_22khz_signal == eDVBSatelliteSwitchParameters::OFF) + || ( sw_param.m_22khz_signal == eDVBSatelliteSwitchParameters::HILO && !(band&1) ) ) + tone = iDVBFrontend::toneOff; + } + else + { + int tmp1 = abs(sat.frequency + -lof) + + lnb_param.SatCRvco + - 1400000 + + lnb_param.guard_offset; + int tmp2 = ((((tmp1 * 2) / 4000) + 1) / 2) * 4000; + parm.FREQUENCY = lnb_param.SatCRvco - (tmp1-tmp2) + lnb_param.guard_offset; + lnb_param.UnicableTuningWord = ((tmp2 / 4000) + | ((band & 1) ? 0x400 : 0) //HighLow + | ((band & 2) ? 0x800 : 0) //VertHor + | ((lnb_param.LNBNum & 1) ? 0 : 0x1000) //Umschaltung LNB1 LNB2 + | (lnb_param.SatCR_idx << 13)); //Adresse des SatCR + eDebug("[prepare] UnicableTuningWord %#04x",lnb_param.UnicableTuningWord); + eDebug("[prepare] guard_offset %d",lnb_param.guard_offset); + frontend.setData(eDVBFrontend::FREQ_OFFSET, (lnb_param.UnicableTuningWord & 0x3FF) *4000 + 1400000 + lof - (2 * (lnb_param.SatCRvco - (tmp1-tmp2))) ); + voltage = VOLTAGE(13); + } if (diseqc_mode >= eDVBSatelliteDiseqcParameters::V1_0) { @@ -479,7 +438,7 @@ RESULT eDVBSatelliteEquipmentControl::prepare(iDVBFrontend &frontend, FRONTENDPA (di_param.m_toneburst_param != eDVBSatelliteDiseqcParameters::NO); bool changed_burst = send_burst && (forceChanged || toneburst != lastToneburst); - int send_mask = 0; /* + /* send_mask 1 must send csw 2 must send ucsw 4 send toneburst first @@ -505,7 +464,7 @@ RESULT eDVBSatelliteEquipmentControl::prepare(iDVBFrontend &frontend, FRONTENDPA if (di_param.m_command_order==4 && send_burst) send_mask |= 8; } - if (changed_csw) + if (changed_csw) { if ( di_param.m_use_fast && di_param.m_committed_cmd < eDVBSatelliteDiseqcParameters::SENDNO @@ -531,372 +490,201 @@ RESULT eDVBSatelliteEquipmentControl::prepare(iDVBFrontend &frontend, FRONTENDPA eDebugNoNewLine("0"); eDebug(""); #endif - if (doSetVoltageToneFrontend) + if ( diseqc_mode == eDVBSatelliteDiseqcParameters::V1_2 + && !sat.no_rotor_command_on_tune ) { - int RotorCmd=-1; - bool useGotoXX = false; - if ( diseqc_mode == eDVBSatelliteDiseqcParameters::V1_2 - && !sat.no_rotor_command_on_tune ) + if (sw_param.m_rotorPosNum) // we have stored rotor pos? + RotorCmd=sw_param.m_rotorPosNum; + else // we must calc gotoxx cmd { - if (sw_param.m_rotorPosNum) // we have stored rotor pos? - RotorCmd=sw_param.m_rotorPosNum; - else // we must calc gotoxx cmd - { - eDebugNoSimulate("Entry for %d,%d? not in Rotor Table found... i try gotoXX?", sat.orbital_position / 10, sat.orbital_position % 10 ); - useGotoXX = true; - - double SatLon = abs(sat.orbital_position)/10.00, - SiteLat = rotor_param.m_gotoxx_parameters.m_latitude, - SiteLon = rotor_param.m_gotoxx_parameters.m_longitude; - - if ( rotor_param.m_gotoxx_parameters.m_la_direction == eDVBSatelliteRotorParameters::SOUTH ) - SiteLat = -SiteLat; - - if ( rotor_param.m_gotoxx_parameters.m_lo_direction == eDVBSatelliteRotorParameters::WEST ) - SiteLon = 360 - SiteLon; - - eDebugNoSimulate("siteLatitude = %lf, siteLongitude = %lf, %lf degrees", SiteLat, SiteLon, SatLon ); - double satHourAngle = - calcSatHourangle( SatLon, SiteLat, SiteLon ); - eDebugNoSimulate("PolarmountHourAngle=%lf", satHourAngle ); - - static int gotoXTable[10] = - { 0x00, 0x02, 0x03, 0x05, 0x06, 0x08, 0x0A, 0x0B, 0x0D, 0x0E }; - - if (SiteLat >= 0) // Northern Hemisphere - { - int tmp=(int)round( fabs( 180 - satHourAngle ) * 10.0 ); - RotorCmd = (tmp/10)*0x10 + gotoXTable[ tmp % 10 ]; - - if (satHourAngle < 180) // the east - RotorCmd |= 0xE000; - else // west - RotorCmd |= 0xD000; - } - else // Southern Hemisphere - { - if (satHourAngle < 180) // the east - { - int tmp=(int)round( fabs( satHourAngle ) * 10.0 ); - RotorCmd = (tmp/10)*0x10 + gotoXTable[ tmp % 10 ]; - RotorCmd |= 0xD000; - } - else // west - { - int tmp=(int)round( fabs( 360 - satHourAngle ) * 10.0 ); - RotorCmd = (tmp/10)*0x10 + gotoXTable[ tmp % 10 ]; - RotorCmd |= 0xE000; - } - } - eDebugNoSimulate("RotorCmd = %04x", RotorCmd); - } - } + eDebugNoSimulate("Entry for %d,%d? not in Rotor Table found... i try gotoXX?", sat.orbital_position / 10, sat.orbital_position % 10 ); + useGotoXX = true; - if ( send_mask ) - { - int vlt = iDVBFrontend::voltageOff; - eSecCommand::pair compare; - compare.steps = +3; - compare.tone = iDVBFrontend::toneOff; - sec_sequence.push_back( eSecCommand(eSecCommand::IF_TONE_GOTO, compare) ); - sec_sequence.push_back( eSecCommand(eSecCommand::SET_TONE, iDVBFrontend::toneOff) ); - sec_sequence.push_back( eSecCommand(eSecCommand::SLEEP, m_params[DELAY_AFTER_CONT_TONE]) ); - - if (diseqc13V) - vlt = iDVBFrontend::voltage13; - else if ( RotorCmd != -1 && RotorCmd != lastRotorCmd ) - { - if (rotor_param.m_inputpower_parameters.m_use) - vlt = VOLTAGE(18); // in input power mode set 18V for measure input power - else - vlt = VOLTAGE(13); // in normal mode start turning with 13V - } - else - vlt = voltage; + double SatLon = abs(sat.orbital_position)/10.00, + SiteLat = rotor_param.m_gotoxx_parameters.m_latitude, + SiteLon = rotor_param.m_gotoxx_parameters.m_longitude; - // check if voltage is already correct.. - compare.voltage = vlt; - compare.steps = +7; - sec_sequence.push_back( eSecCommand(eSecCommand::IF_VOLTAGE_GOTO, compare) ); + if ( rotor_param.m_gotoxx_parameters.m_la_direction == eDVBSatelliteRotorParameters::SOUTH ) + SiteLat = -SiteLat; - // check if voltage is disabled - compare.voltage = iDVBFrontend::voltageOff; - compare.steps = +4; - sec_sequence.push_back( eSecCommand(eSecCommand::IF_VOLTAGE_GOTO, compare) ); + if ( rotor_param.m_gotoxx_parameters.m_lo_direction == eDVBSatelliteRotorParameters::WEST ) + SiteLon = 360 - SiteLon; - // voltage is changed... use DELAY_AFTER_VOLTAGE_CHANGE_BEFORE_SWITCH_CMDS - sec_sequence.push_back( eSecCommand(eSecCommand::SET_VOLTAGE, vlt) ); - sec_sequence.push_back( eSecCommand(eSecCommand::SLEEP, m_params[DELAY_AFTER_VOLTAGE_CHANGE_BEFORE_SWITCH_CMDS]) ); - sec_sequence.push_back( eSecCommand(eSecCommand::GOTO, +3) ); + eDebugNoSimulate("siteLatitude = %lf, siteLongitude = %lf, %lf degrees", SiteLat, SiteLon, SatLon ); + double satHourAngle = + calcSatHourangle( SatLon, SiteLat, SiteLon ); + eDebugNoSimulate("PolarmountHourAngle=%lf", satHourAngle ); - // voltage was disabled.. use DELAY_AFTER_ENABLE_VOLTAGE_BEFORE_SWITCH_CMDS - sec_sequence.push_back( eSecCommand(eSecCommand::SET_VOLTAGE, vlt) ); - sec_sequence.push_back( eSecCommand(eSecCommand::SLEEP, m_params[DELAY_AFTER_ENABLE_VOLTAGE_BEFORE_SWITCH_CMDS]) ); + static int gotoXTable[10] = + { 0x00, 0x02, 0x03, 0x05, 0x06, 0x08, 0x0A, 0x0B, 0x0D, 0x0E }; - sec_sequence.push_back( eSecCommand(eSecCommand::INVALIDATE_CURRENT_SWITCHPARMS) ); - if (needDiSEqCReset) + if (SiteLat >= 0) // Northern Hemisphere { - eDVBDiseqcCommand diseqc; - memset(diseqc.data, 0, MAX_DISEQC_LENGTH); - diseqc.len = 3; - diseqc.data[0] = 0xE0; - diseqc.data[1] = 0; - diseqc.data[2] = 0; - // diseqc reset - sec_sequence.push_back( eSecCommand(eSecCommand::SEND_DISEQC, diseqc) ); - sec_sequence.push_back( eSecCommand(eSecCommand::SLEEP, m_params[DELAY_AFTER_DISEQC_RESET_CMD]) ); - diseqc.data[2] = 3; - // diseqc peripherial powersupply on - sec_sequence.push_back( eSecCommand(eSecCommand::SEND_DISEQC, diseqc) ); - sec_sequence.push_back( eSecCommand(eSecCommand::SLEEP, m_params[DELAY_AFTER_DISEQC_PERIPHERIAL_POWERON_CMD]) ); - } + int tmp=(int)round( fabs( 180 - satHourAngle ) * 10.0 ); + RotorCmd = (tmp/10)*0x10 + gotoXTable[ tmp % 10 ]; - for (int seq_repeat = 0; seq_repeat < (di_param.m_seq_repeat?2:1); ++seq_repeat) + if (satHourAngle < 180) // the east + RotorCmd |= 0xE000; + else // west + RotorCmd |= 0xD000; + } + else // Southern Hemisphere { - if ( send_mask & 4 ) + if (satHourAngle < 180) // the east { - sec_sequence.push_back( eSecCommand(eSecCommand::SEND_TONEBURST, di_param.m_toneburst_param) ); - sec_sequence.push_back( eSecCommand(eSecCommand::SLEEP, m_params[DELAY_AFTER_TONEBURST]) ); - } - - int loops=0; - - if ( send_mask & 1 ) - ++loops; - if ( send_mask & 2 ) - ++loops; - - loops <<= di_param.m_repeats; - - for ( int i = 0; i < loops;) // fill commands... - { - eDVBDiseqcCommand diseqc; - memset(diseqc.data, 0, MAX_DISEQC_LENGTH); - diseqc.len = 4; - diseqc.data[0] = i ? 0xE1 : 0xE0; - diseqc.data[1] = 0x10; - if ( (send_mask & 2) && (di_param.m_command_order & 4) ) - { - diseqc.data[2] = 0x39; - diseqc.data[3] = ucsw; - } - else if ( send_mask & 1 ) - { - diseqc.data[2] = 0x38; - diseqc.data[3] = csw; - } - else // no committed command confed.. so send uncommitted.. - { - diseqc.data[2] = 0x39; - diseqc.data[3] = ucsw; - } - sec_sequence.push_back( eSecCommand(eSecCommand::SEND_DISEQC, diseqc) ); - - i++; - if ( i < loops ) - { - int cmd=0; - if (diseqc.data[2] == 0x38 && (send_mask & 2)) - cmd=0x39; - else if (diseqc.data[2] == 0x39 && (send_mask & 1)) - cmd=0x38; - int tmp = m_params[DELAY_BETWEEN_DISEQC_REPEATS]; - if (cmd) - { - int delay = di_param.m_repeats ? (tmp - 54) / 2 : tmp; // standard says 100msek between two repeated commands - sec_sequence.push_back( eSecCommand(eSecCommand::SLEEP, delay) ); - diseqc.data[2]=cmd; - diseqc.data[3]=(cmd==0x38) ? csw : ucsw; - sec_sequence.push_back( eSecCommand(eSecCommand::SEND_DISEQC, diseqc) ); - ++i; - if ( i < loops ) - sec_sequence.push_back( eSecCommand(eSecCommand::SLEEP, delay ) ); - else - sec_sequence.push_back( eSecCommand(eSecCommand::SLEEP, m_params[DELAY_AFTER_LAST_DISEQC_CMD]) ); - } - else // delay 120msek when no command is in repeat gap - sec_sequence.push_back( eSecCommand(eSecCommand::SLEEP, tmp) ); - } - else - sec_sequence.push_back( eSecCommand(eSecCommand::SLEEP, m_params[DELAY_AFTER_LAST_DISEQC_CMD]) ); + int tmp=(int)round( fabs( satHourAngle ) * 10.0 ); + RotorCmd = (tmp/10)*0x10 + gotoXTable[ tmp % 10 ]; + RotorCmd |= 0xD000; } - - if ( send_mask & 8 ) // toneburst at end of sequence + else // west { - sec_sequence.push_back( eSecCommand(eSecCommand::SEND_TONEBURST, di_param.m_toneburst_param) ); - sec_sequence.push_back( eSecCommand(eSecCommand::SLEEP, m_params[DELAY_AFTER_TONEBURST]) ); + int tmp=(int)round( fabs( 360 - satHourAngle ) * 10.0 ); + RotorCmd = (tmp/10)*0x10 + gotoXTable[ tmp % 10 ]; + RotorCmd |= 0xE000; } - - if (di_param.m_seq_repeat && seq_repeat == 0) - sec_sequence.push_back( eSecCommand(eSecCommand::SLEEP, m_params[DELAY_BEFORE_SEQUENCE_REPEAT]) ); } - sendDiSEqC = true; + eDebugNoSimulate("RotorCmd = %04x", RotorCmd); } + } - eDebugNoSimulate("RotorCmd %02x, lastRotorCmd %02lx", RotorCmd, lastRotorCmd); - if ( RotorCmd != -1 && RotorCmd != lastRotorCmd ) + if ( send_mask ) + { + int diseqc_repeats = diseqc_mode > eDVBSatelliteDiseqcParameters::V1_0 ? di_param.m_repeats : 0; + int vlt = iDVBFrontend::voltageOff; + eSecCommand::pair compare; + compare.steps = +3; + compare.tone = iDVBFrontend::toneOff; + sec_sequence.push_back( eSecCommand(eSecCommand::IF_TONE_GOTO, compare) ); + sec_sequence.push_back( eSecCommand(eSecCommand::SET_TONE, iDVBFrontend::toneOff) ); + sec_sequence.push_back( eSecCommand(eSecCommand::SLEEP, m_params[DELAY_AFTER_CONT_TONE_DISABLE_BEFORE_DISEQC]) ); + + if (diseqc13V) + vlt = iDVBFrontend::voltage13; + else if ( RotorCmd != -1 && RotorCmd != lastRotorCmd ) { - eSecCommand::pair compare; - if (!send_mask) - { - compare.steps = +3; - compare.tone = iDVBFrontend::toneOff; - sec_sequence.push_back( eSecCommand(eSecCommand::IF_TONE_GOTO, compare) ); - sec_sequence.push_back( eSecCommand(eSecCommand::SET_TONE, iDVBFrontend::toneOff) ); - sec_sequence.push_back( eSecCommand(eSecCommand::SLEEP, m_params[DELAY_AFTER_CONT_TONE]) ); - - compare.voltage = iDVBFrontend::voltageOff; - compare.steps = +4; - // the next is a check if voltage is switched off.. then we first set a voltage :) - // else we set voltage after all diseqc stuff.. - sec_sequence.push_back( eSecCommand(eSecCommand::IF_NOT_VOLTAGE_GOTO, compare) ); - - if (rotor_param.m_inputpower_parameters.m_use) - sec_sequence.push_back( eSecCommand(eSecCommand::SET_VOLTAGE, VOLTAGE(18)) ); // set 18V for measure input power - else - sec_sequence.push_back( eSecCommand(eSecCommand::SET_VOLTAGE, VOLTAGE(13)) ); // in normal mode start turning with 13V - - sec_sequence.push_back( eSecCommand(eSecCommand::SLEEP, m_params[DELAY_AFTER_ENABLE_VOLTAGE_BEFORE_MOTOR_CMD]) ); // wait 750ms when voltage was disabled - sec_sequence.push_back( eSecCommand(eSecCommand::GOTO, +9) ); // no need to send stop rotor cmd and recheck voltage - } + if (rotor_param.m_inputpower_parameters.m_use && !is_unicable) + vlt = VOLTAGE(18); // in input power mode set 18V for measure input power else - sec_sequence.push_back( eSecCommand(eSecCommand::SLEEP, m_params[DELAY_BETWEEN_SWITCH_AND_MOTOR_CMD]) ); // wait 700ms when diseqc changed + vlt = VOLTAGE(13); // in normal mode start turning with 13V + } + else + vlt = voltage; + // check if voltage is already correct.. + compare.voltage = vlt; + compare.steps = +7; + sec_sequence.push_back( eSecCommand(eSecCommand::IF_VOLTAGE_GOTO, compare) ); + + // check if voltage is disabled + compare.voltage = iDVBFrontend::voltageOff; + compare.steps = +4; + sec_sequence.push_back( eSecCommand(eSecCommand::IF_VOLTAGE_GOTO, compare) ); + + // voltage is changed... use DELAY_AFTER_VOLTAGE_CHANGE_BEFORE_SWITCH_CMDS + sec_sequence.push_back( eSecCommand(eSecCommand::SET_VOLTAGE, vlt) ); + sec_sequence.push_back( eSecCommand(eSecCommand::SLEEP, m_params[DELAY_AFTER_VOLTAGE_CHANGE_BEFORE_SWITCH_CMDS]) ); + sec_sequence.push_back( eSecCommand(eSecCommand::GOTO, +3) ); + + // voltage was disabled.. use DELAY_AFTER_ENABLE_VOLTAGE_BEFORE_SWITCH_CMDS + sec_sequence.push_back( eSecCommand(eSecCommand::SET_VOLTAGE, vlt) ); + sec_sequence.push_back( eSecCommand(eSecCommand::SLEEP, m_params[DELAY_AFTER_ENABLE_VOLTAGE_BEFORE_SWITCH_CMDS]) ); + + sec_sequence.push_back( eSecCommand(eSecCommand::INVALIDATE_CURRENT_SWITCHPARMS) ); + if (needDiSEqCReset) + { eDVBDiseqcCommand diseqc; memset(diseqc.data, 0, MAX_DISEQC_LENGTH); diseqc.len = 3; diseqc.data[0] = 0xE0; - diseqc.data[1] = 0x31; // positioner - diseqc.data[2] = 0x60; // stop - sec_sequence.push_back( eSecCommand(eSecCommand::IF_ROTORPOS_VALID_GOTO, +5) ); + diseqc.data[1] = 0; + diseqc.data[2] = 0; + // diseqc reset sec_sequence.push_back( eSecCommand(eSecCommand::SEND_DISEQC, diseqc) ); - sec_sequence.push_back( eSecCommand(eSecCommand::SLEEP, 50) ); + sec_sequence.push_back( eSecCommand(eSecCommand::SLEEP, m_params[DELAY_AFTER_DISEQC_RESET_CMD]) ); + diseqc.data[2] = 3; + // diseqc peripherial powersupply on sec_sequence.push_back( eSecCommand(eSecCommand::SEND_DISEQC, diseqc) ); - // wait 150msec after send rotor stop cmd - sec_sequence.push_back( eSecCommand(eSecCommand::SLEEP, m_params[DELAY_AFTER_MOTOR_STOP_CMD]) ); + sec_sequence.push_back( eSecCommand(eSecCommand::SLEEP, m_params[DELAY_AFTER_DISEQC_PERIPHERIAL_POWERON_CMD]) ); + } - diseqc.data[0] = 0xE0; - diseqc.data[1] = 0x31; // positioner - if ( useGotoXX ) + for (int seq_repeat = 0; seq_repeat < (di_param.m_seq_repeat?2:1); ++seq_repeat) + { + if ( send_mask & 4 ) { - diseqc.len = 5; - diseqc.data[2] = 0x6E; // drive to angular position - diseqc.data[3] = ((RotorCmd & 0xFF00) / 0x100); - diseqc.data[4] = RotorCmd & 0xFF; + sec_sequence.push_back( eSecCommand(eSecCommand::SEND_TONEBURST, di_param.m_toneburst_param) ); + sec_sequence.push_back( eSecCommand(eSecCommand::SLEEP, m_params[DELAY_AFTER_TONEBURST]) ); } - else + + int loops=0; + + if ( send_mask & 1 ) + ++loops; + if ( send_mask & 2 ) + ++loops; + + loops <<= diseqc_repeats; + + for ( int i = 0; i < loops;) // fill commands... { + eDVBDiseqcCommand diseqc; + memset(diseqc.data, 0, MAX_DISEQC_LENGTH); diseqc.len = 4; - diseqc.data[2] = 0x6B; // goto stored sat position - diseqc.data[3] = RotorCmd; - diseqc.data[4] = 0x00; - } - - if ( rotor_param.m_inputpower_parameters.m_use ) - { // use measure rotor input power to detect rotor state - bool turn_fast = need_turn_fast(rotor_param.m_inputpower_parameters.m_turning_speed); - eSecCommand::rotor cmd; - eSecCommand::pair compare; - if (turn_fast) - compare.voltage = VOLTAGE(18); - else - compare.voltage = VOLTAGE(13); - compare.steps = +3; - sec_sequence.push_back( eSecCommand(eSecCommand::IF_VOLTAGE_GOTO, compare) ); - sec_sequence.push_back( eSecCommand(eSecCommand::SET_VOLTAGE, compare.voltage) ); -// measure idle power values - compare.steps = -2; - if (turn_fast) { - sec_sequence.push_back( eSecCommand(eSecCommand::SLEEP, m_params[DELAY_AFTER_VOLTAGE_CHANGE_BEFORE_MEASURE_IDLE_INPUTPOWER]) ); // wait 150msec after voltage change - sec_sequence.push_back( eSecCommand(eSecCommand::MEASURE_IDLE_INPUTPOWER, 1) ); - compare.val = 1; - sec_sequence.push_back( eSecCommand(eSecCommand::IF_MEASURE_IDLE_WAS_NOT_OK_GOTO, compare) ); - sec_sequence.push_back( eSecCommand(eSecCommand::SET_VOLTAGE, VOLTAGE(13)) ); + diseqc.data[0] = i ? 0xE1 : 0xE0; + diseqc.data[1] = 0x10; + if ( (send_mask & 2) && (di_param.m_command_order & 4) ) + { + diseqc.data[2] = 0x39; + diseqc.data[3] = ucsw; + } + else if ( send_mask & 1 ) + { + diseqc.data[2] = 0x38; + diseqc.data[3] = csw; + } + else // no committed command confed.. so send uncommitted.. + { + diseqc.data[2] = 0x39; + diseqc.data[3] = ucsw; } - sec_sequence.push_back( eSecCommand(eSecCommand::SLEEP, m_params[DELAY_AFTER_VOLTAGE_CHANGE_BEFORE_MEASURE_IDLE_INPUTPOWER]) ); // wait 150msec before measure - sec_sequence.push_back( eSecCommand(eSecCommand::MEASURE_IDLE_INPUTPOWER, 0) ); - compare.val = 0; - sec_sequence.push_back( eSecCommand(eSecCommand::IF_MEASURE_IDLE_WAS_NOT_OK_GOTO, compare) ); -//////////////////////////// - sec_sequence.push_back( eSecCommand(eSecCommand::SET_ROTOR_DISEQC_RETRYS, m_params[MOTOR_COMMAND_RETRIES]) ); // 2 retries - sec_sequence.push_back( eSecCommand(eSecCommand::INVALIDATE_CURRENT_ROTORPARMS) ); sec_sequence.push_back( eSecCommand(eSecCommand::SEND_DISEQC, diseqc) ); - sec_sequence.push_back( eSecCommand(eSecCommand::SET_TIMEOUT, 40) ); // 2 seconds rotor start timout -// rotor start loop - sec_sequence.push_back( eSecCommand(eSecCommand::SLEEP, 50) ); // 50msec delay - sec_sequence.push_back( eSecCommand(eSecCommand::MEASURE_RUNNING_INPUTPOWER) ); - cmd.direction=1; // check for running rotor - cmd.deltaA=rotor_param.m_inputpower_parameters.m_delta; - cmd.steps=+5; - cmd.okcount=0; - sec_sequence.push_back( eSecCommand(eSecCommand::IF_INPUTPOWER_DELTA_GOTO, cmd ) ); // check if rotor has started - sec_sequence.push_back( eSecCommand(eSecCommand::IF_TIMEOUT_GOTO, +2 ) ); // timeout .. we assume now the rotor is already at the correct position - sec_sequence.push_back( eSecCommand(eSecCommand::GOTO, -4) ); // goto loop start - sec_sequence.push_back( eSecCommand(eSecCommand::IF_NO_MORE_ROTOR_DISEQC_RETRYS_GOTO, turn_fast ? 10 : 9 ) ); // timeout .. we assume now the rotor is already at the correct position - sec_sequence.push_back( eSecCommand(eSecCommand::GOTO, -8) ); // goto loop start -//////////////////// - sec_sequence.push_back( eSecCommand(eSecCommand::SET_ROTOR_MOVING) ); - if (turn_fast) - sec_sequence.push_back( eSecCommand(eSecCommand::SET_VOLTAGE, VOLTAGE(18)) ); - sec_sequence.push_back( eSecCommand(eSecCommand::SET_TIMEOUT, m_params[MOTOR_RUNNING_TIMEOUT]*20) ); // 2 minutes running timeout -// rotor running loop - sec_sequence.push_back( eSecCommand(eSecCommand::SLEEP, 50) ); // wait 50msec - sec_sequence.push_back( eSecCommand(eSecCommand::MEASURE_RUNNING_INPUTPOWER) ); - cmd.direction=0; // check for stopped rotor - cmd.steps=+3; - sec_sequence.push_back( eSecCommand(eSecCommand::IF_INPUTPOWER_DELTA_GOTO, cmd ) ); - sec_sequence.push_back( eSecCommand(eSecCommand::IF_TIMEOUT_GOTO, +2 ) ); // timeout ? this should never happen - sec_sequence.push_back( eSecCommand(eSecCommand::GOTO, -4) ); // running loop start -///////////////////// - sec_sequence.push_back( eSecCommand(eSecCommand::UPDATE_CURRENT_ROTORPARAMS) ); - sec_sequence.push_back( eSecCommand(eSecCommand::SET_ROTOR_STOPPED) ); + + i++; + if ( i < loops ) + { + int cmd=0; + if (diseqc.data[2] == 0x38 && (send_mask & 2)) + cmd=0x39; + else if (diseqc.data[2] == 0x39 && (send_mask & 1)) + cmd=0x38; + int tmp = m_params[DELAY_BETWEEN_DISEQC_REPEATS]; + if (cmd) + { + int delay = diseqc_repeats ? (tmp - 54) / 2 : tmp; // standard says 100msek between two repeated commands + sec_sequence.push_back( eSecCommand(eSecCommand::SLEEP, delay) ); + diseqc.data[2]=cmd; + diseqc.data[3]=(cmd==0x38) ? csw : ucsw; + sec_sequence.push_back( eSecCommand(eSecCommand::SEND_DISEQC, diseqc) ); + ++i; + if ( i < loops ) + sec_sequence.push_back( eSecCommand(eSecCommand::SLEEP, delay ) ); + else + sec_sequence.push_back( eSecCommand(eSecCommand::SLEEP, m_params[DELAY_AFTER_LAST_DISEQC_CMD]) ); + } + else // delay 120msek when no command is in repeat gap + sec_sequence.push_back( eSecCommand(eSecCommand::SLEEP, tmp) ); + } + else + sec_sequence.push_back( eSecCommand(eSecCommand::SLEEP, m_params[DELAY_AFTER_LAST_DISEQC_CMD]) ); } - else - { // use normal turning mode - doSetVoltageToneFrontend=false; - doSetFrontend=false; - eSecCommand::rotor cmd; - eSecCommand::pair compare; - compare.voltage = VOLTAGE(13); - compare.steps = +3; - sec_sequence.push_back( eSecCommand(eSecCommand::IF_VOLTAGE_GOTO, compare) ); - sec_sequence.push_back( eSecCommand(eSecCommand::SET_VOLTAGE, compare.voltage) ); - sec_sequence.push_back( eSecCommand(eSecCommand::SLEEP, m_params[DELAY_AFTER_VOLTAGE_CHANGE_BEFORE_MOTOR_CMD]) ); // wait 150msec after voltage change - - sec_sequence.push_back( eSecCommand(eSecCommand::INVALIDATE_CURRENT_ROTORPARMS) ); - sec_sequence.push_back( eSecCommand(eSecCommand::SET_ROTOR_MOVING) ); - sec_sequence.push_back( eSecCommand(eSecCommand::SEND_DISEQC, diseqc) ); - compare.voltage = voltage; - compare.steps = +3; - sec_sequence.push_back( eSecCommand(eSecCommand::IF_VOLTAGE_GOTO, compare) ); // correct final voltage? - sec_sequence.push_back( eSecCommand(eSecCommand::SLEEP, 2000) ); // wait 2 second before set high voltage - sec_sequence.push_back( eSecCommand(eSecCommand::SET_VOLTAGE, voltage) ); - - compare.tone = tone; - sec_sequence.push_back( eSecCommand(eSecCommand::IF_TONE_GOTO, compare) ); - sec_sequence.push_back( eSecCommand(eSecCommand::SET_TONE, tone) ); - sec_sequence.push_back( eSecCommand(eSecCommand::SLEEP, m_params[DELAY_AFTER_CONT_TONE]) ); - sec_sequence.push_back( eSecCommand(eSecCommand::SET_FRONTEND) ); - - cmd.direction=1; // check for running rotor - cmd.deltaA=0; - cmd.steps=+3; - cmd.okcount=0; - sec_sequence.push_back( eSecCommand(eSecCommand::SET_TIMEOUT, m_params[MOTOR_RUNNING_TIMEOUT]*4) ); // 2 minutes running timeout - sec_sequence.push_back( eSecCommand(eSecCommand::SLEEP, 250) ); // 250msec delay - sec_sequence.push_back( eSecCommand(eSecCommand::IF_TUNER_LOCKED_GOTO, cmd ) ); - sec_sequence.push_back( eSecCommand(eSecCommand::IF_TIMEOUT_GOTO, +3 ) ); - sec_sequence.push_back( eSecCommand(eSecCommand::GOTO, -3) ); // goto loop start - sec_sequence.push_back( eSecCommand(eSecCommand::UPDATE_CURRENT_ROTORPARAMS) ); - sec_sequence.push_back( eSecCommand(eSecCommand::SET_ROTOR_STOPPED) ); - sec_sequence.push_back( eSecCommand(eSecCommand::GOTO, +3) ); - sec_sequence.push_back( eSecCommand(eSecCommand::SET_FRONTEND) ); - sec_sequence.push_back( eSecCommand(eSecCommand::GOTO, -4) ); + if ( send_mask & 8 ) // toneburst at end of sequence + { + sec_sequence.push_back( eSecCommand(eSecCommand::SEND_TONEBURST, di_param.m_toneburst_param) ); + sec_sequence.push_back( eSecCommand(eSecCommand::SLEEP, m_params[DELAY_AFTER_TONEBURST]) ); } - sec_fe->setData(eDVBFrontend::NEW_ROTOR_CMD, RotorCmd); - sec_fe->setData(eDVBFrontend::NEW_ROTOR_POS, sat.orbital_position); - sendDiSEqC = true; + + if (di_param.m_seq_repeat && seq_repeat == 0) + sec_sequence.push_back( eSecCommand(eSecCommand::SLEEP, m_params[DELAY_BEFORE_SEQUENCE_REPEAT]) ); } } } @@ -906,14 +694,223 @@ RESULT eDVBSatelliteEquipmentControl::prepare(iDVBFrontend &frontend, FRONTENDPA csw = band; } -// if (sendDiSEqC) - sec_sequence.push_front( eSecCommand(eSecCommand::SET_POWER_LIMITING_MODE, eSecCommand::modeStatic) ); - sec_fe->setData(eDVBFrontend::NEW_CSW, csw); sec_fe->setData(eDVBFrontend::NEW_UCSW, ucsw); sec_fe->setData(eDVBFrontend::NEW_TONEBURST, di_param.m_toneburst_param); - if (doSetVoltageToneFrontend) + if(is_unicable) + { + // check if voltage is disabled + eSecCommand::pair compare; + compare.steps = +3; + compare.voltage = iDVBFrontend::voltageOff; + sec_sequence.push_back( eSecCommand(eSecCommand::IF_NOT_VOLTAGE_GOTO, compare) ); + sec_sequence.push_back( eSecCommand(eSecCommand::SET_VOLTAGE, VOLTAGE(13)) ); + sec_sequence.push_back( eSecCommand(eSecCommand::SLEEP, m_params[DELAY_AFTER_ENABLE_VOLTAGE_BEFORE_SWITCH_CMDS] ) ); + + sec_sequence.push_back( eSecCommand(eSecCommand::SET_VOLTAGE, VOLTAGE(18)) ); + sec_sequence.push_back( eSecCommand(eSecCommand::SET_TONE, iDVBFrontend::toneOff) ); + sec_sequence.push_back( eSecCommand(eSecCommand::SLEEP, m_params[DELAY_AFTER_VOLTAGE_CHANGE_BEFORE_SWITCH_CMDS]) ); // wait 20 ms after voltage change + + eDVBDiseqcCommand diseqc; + memset(diseqc.data, 0, MAX_DISEQC_LENGTH); + diseqc.len = 5; + diseqc.data[0] = 0xE0; + diseqc.data[1] = 0x10; + diseqc.data[2] = 0x5A; + diseqc.data[3] = lnb_param.UnicableTuningWord >> 8; + diseqc.data[4] = lnb_param.UnicableTuningWord; + + sec_sequence.push_back( eSecCommand(eSecCommand::SEND_DISEQC, diseqc) ); + sec_sequence.push_back( eSecCommand(eSecCommand::SLEEP, m_params[DELAY_AFTER_LAST_DISEQC_CMD]) ); + sec_sequence.push_back( eSecCommand(eSecCommand::SET_VOLTAGE, VOLTAGE(13)) ); + if ( RotorCmd != -1 && RotorCmd != lastRotorCmd && !rotor_param.m_inputpower_parameters.m_use) + sec_sequence.push_back( eSecCommand(eSecCommand::SLEEP, m_params[DELAY_AFTER_VOLTAGE_CHANGE_BEFORE_MOTOR_CMD]) ); // wait 150msec after voltage change + } + + eDebugNoSimulate("RotorCmd %02x, lastRotorCmd %02lx", RotorCmd, lastRotorCmd); + if ( RotorCmd != -1 && RotorCmd != lastRotorCmd ) + { + int mrt = m_params[MOTOR_RUNNING_TIMEOUT]; // in seconds! + eSecCommand::pair compare; + if (!send_mask && !is_unicable) + { + compare.steps = +3; + compare.tone = iDVBFrontend::toneOff; + sec_sequence.push_back( eSecCommand(eSecCommand::IF_TONE_GOTO, compare) ); + sec_sequence.push_back( eSecCommand(eSecCommand::SET_TONE, iDVBFrontend::toneOff) ); + sec_sequence.push_back( eSecCommand(eSecCommand::SLEEP, m_params[DELAY_AFTER_CONT_TONE_DISABLE_BEFORE_DISEQC]) ); + + compare.voltage = iDVBFrontend::voltageOff; + compare.steps = +4; + // the next is a check if voltage is switched off.. then we first set a voltage :) + // else we set voltage after all diseqc stuff.. + sec_sequence.push_back( eSecCommand(eSecCommand::IF_NOT_VOLTAGE_GOTO, compare) ); + + if (rotor_param.m_inputpower_parameters.m_use) + sec_sequence.push_back( eSecCommand(eSecCommand::SET_VOLTAGE, VOLTAGE(18)) ); // set 18V for measure input power + else + sec_sequence.push_back( eSecCommand(eSecCommand::SET_VOLTAGE, VOLTAGE(13)) ); // in normal mode start turning with 13V + + sec_sequence.push_back( eSecCommand(eSecCommand::SLEEP, m_params[DELAY_AFTER_ENABLE_VOLTAGE_BEFORE_MOTOR_CMD]) ); // wait 750ms when voltage was disabled + sec_sequence.push_back( eSecCommand(eSecCommand::GOTO, +9) ); // no need to send stop rotor cmd and recheck voltage + } + else + sec_sequence.push_back( eSecCommand(eSecCommand::SLEEP, m_params[DELAY_BETWEEN_SWITCH_AND_MOTOR_CMD]) ); // wait 700ms when diseqc changed + + eDVBDiseqcCommand diseqc; + memset(diseqc.data, 0, MAX_DISEQC_LENGTH); + diseqc.len = 3; + diseqc.data[0] = 0xE0; + diseqc.data[1] = 0x31; // positioner + diseqc.data[2] = 0x60; // stop + sec_sequence.push_back( eSecCommand(eSecCommand::IF_ROTORPOS_VALID_GOTO, +5) ); + sec_sequence.push_back( eSecCommand(eSecCommand::SEND_DISEQC, diseqc) ); + sec_sequence.push_back( eSecCommand(eSecCommand::SLEEP, 50) ); + sec_sequence.push_back( eSecCommand(eSecCommand::SEND_DISEQC, diseqc) ); + // wait 150msec after send rotor stop cmd + sec_sequence.push_back( eSecCommand(eSecCommand::SLEEP, m_params[DELAY_AFTER_MOTOR_STOP_CMD]) ); + + diseqc.data[0] = 0xE0; + diseqc.data[1] = 0x31; // positioner + if ( useGotoXX ) + { + diseqc.len = 5; + diseqc.data[2] = 0x6E; // drive to angular position + diseqc.data[3] = ((RotorCmd & 0xFF00) / 0x100); + diseqc.data[4] = RotorCmd & 0xFF; + } + else + { + diseqc.len = 4; + diseqc.data[2] = 0x6B; // goto stored sat position + diseqc.data[3] = RotorCmd; + diseqc.data[4] = 0x00; + } + + // use measure rotor input power to detect motor state + if ( rotor_param.m_inputpower_parameters.m_use) + { + bool turn_fast = need_turn_fast(rotor_param.m_inputpower_parameters.m_turning_speed) && !is_unicable; + eSecCommand::rotor cmd; + eSecCommand::pair compare; + if (turn_fast) + compare.voltage = VOLTAGE(18); + else + compare.voltage = VOLTAGE(13); + compare.steps = +3; + sec_sequence.push_back( eSecCommand(eSecCommand::IF_VOLTAGE_GOTO, compare) ); + sec_sequence.push_back( eSecCommand(eSecCommand::SET_VOLTAGE, compare.voltage) ); + // measure idle power values + compare.steps = -2; + if (turn_fast) { + sec_sequence.push_back( eSecCommand(eSecCommand::SLEEP, m_params[DELAY_AFTER_VOLTAGE_CHANGE_BEFORE_MEASURE_IDLE_INPUTPOWER]) ); // wait 150msec after voltage change + sec_sequence.push_back( eSecCommand(eSecCommand::MEASURE_IDLE_INPUTPOWER, 1) ); + compare.val = 1; + sec_sequence.push_back( eSecCommand(eSecCommand::IF_MEASURE_IDLE_WAS_NOT_OK_GOTO, compare) ); + sec_sequence.push_back( eSecCommand(eSecCommand::SET_VOLTAGE, VOLTAGE(13)) ); + } + sec_sequence.push_back( eSecCommand(eSecCommand::SLEEP, m_params[DELAY_AFTER_VOLTAGE_CHANGE_BEFORE_MEASURE_IDLE_INPUTPOWER]) ); // wait 150msec before measure + sec_sequence.push_back( eSecCommand(eSecCommand::MEASURE_IDLE_INPUTPOWER, 0) ); + compare.val = 0; + sec_sequence.push_back( eSecCommand(eSecCommand::IF_MEASURE_IDLE_WAS_NOT_OK_GOTO, compare) ); + //////////////////////////// + sec_sequence.push_back( eSecCommand(eSecCommand::SET_ROTOR_DISEQC_RETRYS, m_params[MOTOR_COMMAND_RETRIES]) ); // 2 retries + sec_sequence.push_back( eSecCommand(eSecCommand::INVALIDATE_CURRENT_ROTORPARMS) ); + sec_sequence.push_back( eSecCommand(eSecCommand::SEND_DISEQC, diseqc) ); + sec_sequence.push_back( eSecCommand(eSecCommand::SET_TIMEOUT, 40) ); // 2 seconds rotor start timout + // rotor start loop + sec_sequence.push_back( eSecCommand(eSecCommand::SLEEP, 50) ); // 50msec delay + sec_sequence.push_back( eSecCommand(eSecCommand::MEASURE_RUNNING_INPUTPOWER) ); + cmd.direction=1; // check for running rotor + cmd.deltaA=rotor_param.m_inputpower_parameters.m_delta; + cmd.steps=+5; + cmd.okcount=0; + sec_sequence.push_back( eSecCommand(eSecCommand::IF_INPUTPOWER_DELTA_GOTO, cmd ) ); // check if rotor has started + sec_sequence.push_back( eSecCommand(eSecCommand::IF_TIMEOUT_GOTO, +2 ) ); // timeout .. we assume now the rotor is already at the correct position + sec_sequence.push_back( eSecCommand(eSecCommand::GOTO, -4) ); // goto loop start + sec_sequence.push_back( eSecCommand(eSecCommand::IF_NO_MORE_ROTOR_DISEQC_RETRYS_GOTO, turn_fast ? 10 : 9 ) ); // timeout .. we assume now the rotor is already at the correct position + sec_sequence.push_back( eSecCommand(eSecCommand::GOTO, -8) ); // goto loop start + //////////////////// + sec_sequence.push_back( eSecCommand(eSecCommand::SET_ROTOR_MOVING) ); + if (turn_fast) + sec_sequence.push_back( eSecCommand(eSecCommand::SET_VOLTAGE, VOLTAGE(18)) ); + sec_sequence.push_back( eSecCommand(eSecCommand::SET_TIMEOUT, mrt*20) ); // mrt is in seconds... our SLEEP time is 50ms.. so * 20 + // rotor running loop + sec_sequence.push_back( eSecCommand(eSecCommand::SLEEP, 50) ); // wait 50msec + sec_sequence.push_back( eSecCommand(eSecCommand::MEASURE_RUNNING_INPUTPOWER) ); + cmd.direction=0; // check for stopped rotor + cmd.steps=+3; + sec_sequence.push_back( eSecCommand(eSecCommand::IF_INPUTPOWER_DELTA_GOTO, cmd ) ); + sec_sequence.push_back( eSecCommand(eSecCommand::IF_TIMEOUT_GOTO, +2 ) ); // timeout ? this should never happen + sec_sequence.push_back( eSecCommand(eSecCommand::GOTO, -4) ); // running loop start + ///////////////////// + sec_sequence.push_back( eSecCommand(eSecCommand::UPDATE_CURRENT_ROTORPARAMS) ); + sec_sequence.push_back( eSecCommand(eSecCommand::SET_ROTOR_STOPPED) ); + } + // use normal motor turning mode + else + { + if (curRotorPos != -1) + { + mrt = abs(curRotorPos - sat.orbital_position); + if (mrt > 1800) + mrt = 3600 - mrt; + if (mrt % 10) + mrt += 10; // round a little bit + mrt *= 2000; // (we assume a very slow rotor with just 0.5 degree per second here) + mrt /= 10000; + mrt += 3; // a little bit overhead + } + doSetVoltageToneFrontend=false; + doSetFrontend=false; + eSecCommand::rotor cmd; + eSecCommand::pair compare; + compare.voltage = VOLTAGE(13); + compare.steps = +3; + sec_sequence.push_back( eSecCommand(eSecCommand::IF_VOLTAGE_GOTO, compare) ); + sec_sequence.push_back( eSecCommand(eSecCommand::SET_VOLTAGE, compare.voltage) ); + sec_sequence.push_back( eSecCommand(eSecCommand::SLEEP, m_params[DELAY_AFTER_VOLTAGE_CHANGE_BEFORE_MOTOR_CMD]) ); // wait 150msec after voltage change + + sec_sequence.push_back( eSecCommand(eSecCommand::INVALIDATE_CURRENT_ROTORPARMS) ); + sec_sequence.push_back( eSecCommand(eSecCommand::SET_ROTOR_MOVING) ); + sec_sequence.push_back( eSecCommand(eSecCommand::SEND_DISEQC, diseqc) ); + sec_sequence.push_back( eSecCommand(eSecCommand::SLEEP, 1000) ); // sleep one second before change voltage or tone + + compare.voltage = voltage; + compare.steps = +3; + sec_sequence.push_back( eSecCommand(eSecCommand::IF_VOLTAGE_GOTO, compare) ); // correct final voltage? + sec_sequence.push_back( eSecCommand(eSecCommand::SLEEP, 2000) ); // wait 2 second before set high voltage + sec_sequence.push_back( eSecCommand(eSecCommand::SET_VOLTAGE, voltage) ); + + compare.tone = tone; + sec_sequence.push_back( eSecCommand(eSecCommand::IF_TONE_GOTO, compare) ); + sec_sequence.push_back( eSecCommand(eSecCommand::SET_TONE, tone) ); + sec_sequence.push_back( eSecCommand(eSecCommand::SLEEP, m_params[DELAY_AFTER_FINAL_CONT_TONE_CHANGE]) ); + sec_sequence.push_back( eSecCommand(eSecCommand::SET_FRONTEND, 0) ); + + cmd.direction=1; // check for running rotor + cmd.deltaA=0; + cmd.steps = +3; + cmd.okcount=0; + sec_sequence.push_back( eSecCommand(eSecCommand::SET_TIMEOUT, mrt*4) ); // mrt is in seconds... our SLEEP time is 250ms.. so * 4 + sec_sequence.push_back( eSecCommand(eSecCommand::SLEEP, 250) ); // 250msec delay + sec_sequence.push_back( eSecCommand(eSecCommand::IF_TUNER_LOCKED_GOTO, cmd ) ); + sec_sequence.push_back( eSecCommand(eSecCommand::IF_TIMEOUT_GOTO, +5 ) ); + sec_sequence.push_back( eSecCommand(eSecCommand::GOTO, -3) ); // goto loop start + sec_sequence.push_back( eSecCommand(eSecCommand::UPDATE_CURRENT_ROTORPARAMS) ); + sec_sequence.push_back( eSecCommand(eSecCommand::SET_ROTOR_STOPPED) ); + sec_sequence.push_back( eSecCommand(eSecCommand::GOTO, +4) ); + sec_sequence.push_back( eSecCommand(eSecCommand::START_TUNE_TIMEOUT, tunetimeout) ); + sec_sequence.push_back( eSecCommand(eSecCommand::SET_FRONTEND, 1) ); + sec_sequence.push_back( eSecCommand(eSecCommand::GOTO, -5) ); + eDebug("set rotor timeout to %d seconds", mrt); + } + sec_fe->setData(eDVBFrontend::NEW_ROTOR_CMD, RotorCmd); + sec_fe->setData(eDVBFrontend::NEW_ROTOR_POS, sat.orbital_position); + } + + if (doSetVoltageToneFrontend && !is_unicable) { eSecCommand::pair compare; compare.voltage = voltage; @@ -924,7 +921,7 @@ RESULT eDVBSatelliteEquipmentControl::prepare(iDVBFrontend &frontend, FRONTENDPA compare.tone = tone; sec_sequence.push_back( eSecCommand(eSecCommand::IF_TONE_GOTO, compare) ); sec_sequence.push_back( eSecCommand(eSecCommand::SET_TONE, tone) ); - sec_sequence.push_back( eSecCommand(eSecCommand::SLEEP, m_params[DELAY_AFTER_CONT_TONE]) ); + sec_sequence.push_back( eSecCommand(eSecCommand::SLEEP, m_params[DELAY_AFTER_FINAL_CONT_TONE_CHANGE]) ); } sec_sequence.push_back( eSecCommand(eSecCommand::UPDATE_CURRENT_SWITCHPARMS) ); @@ -932,11 +929,11 @@ RESULT eDVBSatelliteEquipmentControl::prepare(iDVBFrontend &frontend, FRONTENDPA if (doSetFrontend) { sec_sequence.push_back( eSecCommand(eSecCommand::START_TUNE_TIMEOUT, tunetimeout) ); - sec_sequence.push_back( eSecCommand(eSecCommand::SET_FRONTEND) ); + sec_sequence.push_back( eSecCommand(eSecCommand::SET_FRONTEND, 1) ); } -// if (sendDiSEqC) - sec_sequence.push_back( eSecCommand(eSecCommand::SLEEP, 50) ); + sec_sequence.push_front( eSecCommand(eSecCommand::SET_POWER_LIMITING_MODE, eSecCommand::modeStatic) ); + sec_sequence.push_back( eSecCommand(eSecCommand::SLEEP, 500) ); sec_sequence.push_back( eSecCommand(eSecCommand::SET_POWER_LIMITING_MODE, eSecCommand::modeDynamic) ); frontend.setSecSequence(sec_sequence); @@ -947,23 +944,58 @@ RESULT eDVBSatelliteEquipmentControl::prepare(iDVBFrontend &frontend, FRONTENDPA eDebugNoSimulate("found no useable satellite configuration for %s freq %d%s %s on orbital position (%d)", sat.system ? "DVB-S2" : "DVB-S", sat.frequency, - sat.polarisation == eDVBFrontendParametersSatellite::Polarisation::Horizontal ? "H" : - eDVBFrontendParametersSatellite::Polarisation::Vertical ? "V" : - eDVBFrontendParametersSatellite::Polarisation::CircularLeft ? "CL" : "CR", - sat.modulation == eDVBFrontendParametersSatellite::Modulation::Auto ? "AUTO" : - eDVBFrontendParametersSatellite::Modulation::QPSK ? "QPSK" : - eDVBFrontendParametersSatellite::Modulation::M8PSK ? "8PSK" : "QAM16", + sat.polarisation == eDVBFrontendParametersSatellite::Polarisation_Horizontal ? "H" : + eDVBFrontendParametersSatellite::Polarisation_Vertical ? "V" : + eDVBFrontendParametersSatellite::Polarisation_CircularLeft ? "CL" : "CR", + sat.modulation == eDVBFrontendParametersSatellite::Modulation_Auto ? "AUTO" : + eDVBFrontendParametersSatellite::Modulation_QPSK ? "QPSK" : + eDVBFrontendParametersSatellite::Modulation_8PSK ? "8PSK" : "QAM16", sat.orbital_position ); return -1; } +void eDVBSatelliteEquipmentControl::prepareTurnOffSatCR(iDVBFrontend &frontend, int satcr) +{ + eSecCommandList sec_sequence; + + // check if voltage is disabled + eSecCommand::pair compare; + compare.steps = +9; //only close frontend + compare.voltage = iDVBFrontend::voltageOff; + + sec_sequence.push_back( eSecCommand(eSecCommand::IF_VOLTAGE_GOTO, compare) ); + sec_sequence.push_back( eSecCommand(eSecCommand::SET_VOLTAGE, iDVBFrontend::voltage13) ); + sec_sequence.push_back( eSecCommand(eSecCommand::SLEEP, m_params[DELAY_AFTER_ENABLE_VOLTAGE_BEFORE_SWITCH_CMDS]) ); + + sec_sequence.push_back( eSecCommand(eSecCommand::SET_VOLTAGE, iDVBFrontend::voltage18_5) ); + sec_sequence.push_back( eSecCommand(eSecCommand::SET_TONE, iDVBFrontend::toneOff) ); + sec_sequence.push_back( eSecCommand(eSecCommand::SLEEP, m_params[DELAY_AFTER_VOLTAGE_CHANGE_BEFORE_SWITCH_CMDS]) ); + + eDVBDiseqcCommand diseqc; + memset(diseqc.data, 0, MAX_DISEQC_LENGTH); + diseqc.len = 5; + diseqc.data[0] = 0xE0; + diseqc.data[1] = 0x10; + diseqc.data[2] = 0x5A; + diseqc.data[3] = satcr << 5; + diseqc.data[4] = 0x00; + + sec_sequence.push_back( eSecCommand(eSecCommand::SEND_DISEQC, diseqc) ); + sec_sequence.push_back( eSecCommand(eSecCommand::SLEEP, m_params[DELAY_AFTER_LAST_DISEQC_CMD]) ); + sec_sequence.push_back( eSecCommand(eSecCommand::SET_VOLTAGE, iDVBFrontend::voltage13) ); + sec_sequence.push_back( eSecCommand(eSecCommand::DELAYED_CLOSE_FRONTEND) ); + + frontend.setSecSequence(sec_sequence); +} + RESULT eDVBSatelliteEquipmentControl::clear() { eSecDebug("eDVBSatelliteEquipmentControl::clear()"); for (int i=0; i <= m_lnbidx; ++i) { m_lnbs[i].m_satellites.clear(); - m_lnbs[i].slot_mask = 0; + m_lnbs[i].m_slot_mask = 0; + m_lnbs[i].m_prio = -1; // auto } m_lnbidx=-1; @@ -972,23 +1004,12 @@ RESULT eDVBSatelliteEquipmentControl::clear() //reset some tuner configuration for (eSmartPtrList::iterator it(m_avail_frontends.begin()); it != m_avail_frontends.end(); ++it) { - long tmp; - if (!strcmp(it->m_frontend->getDescription(), "BCM4501 (internal)") && !it->m_frontend->getData(eDVBFrontend::LINKED_PREV_PTR, tmp) && tmp != -1) - { - FILE *f=fopen("/proc/stb/tsmux/lnb_b_input", "w"); - if (!f || fwrite("B", 1, 1, f) != 1) - eDebug("set /proc/stb/tsmux/lnb_b_input to B failed!! (%m)"); - else - { - eDebug("set /proc/stb/tsmux/lnb_b_input to B OK"); - fclose(f); - } - } it->m_frontend->setData(eDVBFrontend::SATPOS_DEPENDS_PTR, -1); it->m_frontend->setData(eDVBFrontend::LINKED_PREV_PTR, -1); it->m_frontend->setData(eDVBFrontend::LINKED_NEXT_PTR, -1); it->m_frontend->setData(eDVBFrontend::ROTOR_POS, -1); it->m_frontend->setData(eDVBFrontend::ROTOR_CMD, -1); + it->m_frontend->setData(eDVBFrontend::SATCR, -1); } for (eSmartPtrList::iterator it(m_avail_simulate_frontends.begin()); it != m_avail_simulate_frontends.end(); ++it) @@ -998,6 +1019,7 @@ RESULT eDVBSatelliteEquipmentControl::clear() it->m_frontend->setData(eDVBFrontend::LINKED_NEXT_PTR, -1); it->m_frontend->setData(eDVBFrontend::ROTOR_POS, -1); it->m_frontend->setData(eDVBFrontend::ROTOR_CMD, -1); + it->m_frontend->setData(eDVBFrontend::SATCR, -1); } return 0; @@ -1021,7 +1043,7 @@ RESULT eDVBSatelliteEquipmentControl::setLNBSlotMask(int slotmask) { eSecDebug("eDVBSatelliteEquipmentControl::setLNBSlotMask(%d)", slotmask); if ( currentLNBValid() ) - m_lnbs[m_lnbidx].slot_mask = slotmask; + m_lnbs[m_lnbidx].m_slot_mask = slotmask; else return -ENOENT; return 0; @@ -1067,6 +1089,28 @@ RESULT eDVBSatelliteEquipmentControl::setLNBIncreasedVoltage(bool onoff) return 0; } +RESULT eDVBSatelliteEquipmentControl::setLNBPrio(int prio) +{ + eSecDebug("eDVBSatelliteEquipmentControl::setLNBPrio(%d)", prio); + if ( currentLNBValid() ) + m_lnbs[m_lnbidx].m_prio = prio; + else + return -ENOENT; + return 0; +} + +RESULT eDVBSatelliteEquipmentControl::setLNBNum(int LNBNum) +{ + eSecDebug("eDVBSatelliteEquipmentControl::setLNBNum(%d)", LNBNum); + if(!((LNBNum >= 1) && (LNBNum <= MAX_LNBNUM))) + return -EPERM; + if ( currentLNBValid() ) + m_lnbs[m_lnbidx].LNBNum = LNBNum; + else + return -ENOENT; + return 0; +} + /* DiSEqC Specific Parameters */ RESULT eDVBSatelliteEquipmentControl::setDiSEqCMode(int diseqcmode) { @@ -1209,6 +1253,66 @@ RESULT eDVBSatelliteEquipmentControl::setInputpowerDelta(int delta) return 0; } +/* Unicable Specific Parameters */ +RESULT eDVBSatelliteEquipmentControl::setLNBSatCR(int SatCR_idx) +{ + eSecDebug("eDVBSatelliteEquipmentControl::setLNBSatCR(%d)", SatCR_idx); + if(!((SatCR_idx >=-1) && (SatCR_idx < MAX_SATCR))) + return -EPERM; + if ( currentLNBValid() ) + m_lnbs[m_lnbidx].SatCR_idx = SatCR_idx; + else + return -ENOENT; + return 0; +} + +RESULT eDVBSatelliteEquipmentControl::setLNBSatCRvco(int SatCRvco) +{ + eSecDebug("eDVBSatelliteEquipmentControl::setLNBSatCRvco(%d)", SatCRvco); + if(!((SatCRvco >= 950*1000) && (SatCRvco <= 2150*1000))) + return -EPERM; + if(!((m_lnbs[m_lnbidx].SatCR_idx >= 0) && (m_lnbs[m_lnbidx].SatCR_idx < MAX_SATCR))) + return -ENOENT; + if ( currentLNBValid() ) + m_lnbs[m_lnbidx].SatCRvco = SatCRvco; + else + return -ENOENT; + return 0; +} + +RESULT eDVBSatelliteEquipmentControl::setLNBSatCRpositions(int SatCR_positions) +{ + eSecDebug("eDVBSatelliteEquipmentControl::setLNBSatCRpositions(%d)", SatCR_positions); + if(SatCR_positions < 1 || SatCR_positions > 2) + return -EPERM; + if ( currentLNBValid() ) + m_lnbs[m_lnbidx].SatCR_positions = SatCR_positions; + else + return -ENOENT; + return 0; +} + +RESULT eDVBSatelliteEquipmentControl::getLNBSatCRpositions() +{ + if ( currentLNBValid() ) + return m_lnbs[m_lnbidx].SatCR_positions; + return -ENOENT; +} + +RESULT eDVBSatelliteEquipmentControl::getLNBSatCR() +{ + if ( currentLNBValid() ) + return m_lnbs[m_lnbidx].SatCR_idx; + return -ENOENT; +} + +RESULT eDVBSatelliteEquipmentControl::getLNBSatCRvco() +{ + if ( currentLNBValid() ) + return m_lnbs[m_lnbidx].SatCRvco; + return -ENOENT; +} + /* Satellite Specific Parameters */ RESULT eDVBSatelliteEquipmentControl::addSatellite(int orbital_position) { @@ -1318,8 +1422,8 @@ RESULT eDVBSatelliteEquipmentControl::setTunerLinked(int tu1, int tu2) if (tu1 != tu2) { eDVBRegisteredFrontend *p1=NULL, *p2=NULL; - - for (eSmartPtrList::iterator it(m_avail_frontends.begin()); it != m_avail_frontends.end(); ++it) + eSmartPtrList::iterator it(m_avail_frontends.begin()); + for (; it != m_avail_frontends.end(); ++it) { if (it->m_frontend->getSlotID() == tu1) p1 = *it; @@ -1328,23 +1432,14 @@ RESULT eDVBSatelliteEquipmentControl::setTunerLinked(int tu1, int tu2) } if (p1 && p2) { + char c; p1->m_frontend->setData(eDVBFrontend::LINKED_PREV_PTR, (long)p2); p2->m_frontend->setData(eDVBFrontend::LINKED_NEXT_PTR, (long)p1); - if (!strcmp(p1->m_frontend->getDescription(), p2->m_frontend->getDescription()) && !strcmp(p1->m_frontend->getDescription(), "BCM4501 (internal)")) - { - FILE *f=fopen("/proc/stb/tsmux/lnb_b_input", "w"); - if (!f || fwrite("A", 1, 1, f) != 1) - eDebug("set /proc/stb/tsmux/lnb_b_input to A failed!! (%m)"); - else - { - eDebug("set /proc/stb/tsmux/lnb_b_input to A OK"); - fclose(f); - } - } } p1=p2=NULL; - for (eSmartPtrList::iterator it(m_avail_simulate_frontends.begin()); it != m_avail_simulate_frontends.end(); ++it) + it=m_avail_simulate_frontends.begin(); + for (; it != m_avail_simulate_frontends.end(); ++it) { if (it->m_frontend->getSlotID() == tu1) p1 = *it; @@ -1411,7 +1506,10 @@ bool eDVBSatelliteEquipmentControl::isRotorMoving() return m_rotorMoving; } -void eDVBSatelliteEquipmentControl::setRotorMoving(bool b) +void eDVBSatelliteEquipmentControl::setRotorMoving(int slot_no, bool b) { - m_rotorMoving=b; + if (b) + m_rotorMoving |= (1 << slot_no); + else + m_rotorMoving &= ~(1 << slot_no); }