X-Git-Url: https://git.cweiske.de/enigma2.git/blobdiff_plain/961fcb6cec16091f610dec1f019d43b6096e7390..2b0cb23445858adf81b34500883c842ffd26f4f8:/lib/dvb/sec.cpp

diff --git a/lib/dvb/sec.cpp b/lib/dvb/sec.cpp
index f91824dc..86f549c2 100644
--- a/lib/dvb/sec.cpp
+++ b/lib/dvb/sec.cpp
@@ -544,8 +544,8 @@ RESULT eDVBSatelliteEquipmentControl::prepare(iDVBFrontend &frontend, FRONTENDPA
 					sec_sequence.push_back( eSecCommand(eSecCommand::IF_VOLTAGE_GOTO, compare) );
 					compare.steps = +3;
 					sec_sequence.push_back( eSecCommand(eSecCommand::SET_VOLTAGE, compare.voltage) );
-					// voltage was disabled..so we wait a longer time .. for normal switches 200ms should be enough
-					sec_sequence.push_back( eSecCommand(eSecCommand::SLEEP, 200) );
+					// voltage was disabled..so we wait a longer time .. for normal switches 750ms should be enough
+					sec_sequence.push_back( eSecCommand(eSecCommand::SLEEP, 750) );
 
 					for (int seq_repeat = 0; seq_repeat < (di_param.m_seq_repeat?2:1); ++seq_repeat)
 					{
@@ -562,8 +562,7 @@ RESULT eDVBSatelliteEquipmentControl::prepare(iDVBFrontend &frontend, FRONTENDPA
 						if ( send_mask & 2 )
 							++loops;
 
-						for ( int i=0; i < di_param.m_repeats; ++i )
-							loops *= 2;
+						loops <<= di_param.m_repeats;
 
 						for ( int i = 0; i < loops;)  // fill commands...
 						{
@@ -598,7 +597,7 @@ RESULT eDVBSatelliteEquipmentControl::prepare(iDVBFrontend &frontend, FRONTENDPA
 									cmd=0x38;
 								if (cmd)
 								{
-									static int delay = (120 - 54) / 2;  // standard says 100msek between two repeated commands
+									int delay = di_param.m_repeats ? (120 - 54) / 2 : 120;  // standard says 100msek between two repeated commands
 									sec_sequence.push_back( eSecCommand(eSecCommand::SLEEP, delay) );
 									diseqc.data[2]=cmd;
 									diseqc.data[3]=(cmd==0x38) ? csw : ucsw;
@@ -627,25 +626,28 @@ RESULT eDVBSatelliteEquipmentControl::prepare(iDVBFrontend &frontend, FRONTENDPA
 				if ( RotorCmd != -1 && RotorCmd != lastRotorCmd )
 				{
 					eSecCommand::pair compare;
-					compare.voltage = iDVBFrontend::voltageOff;
-					compare.steps = +4;
-					// the next is a check if voltage is switched off.. then we first set a voltage :)
-					// else we set voltage after all diseqc stuff..
-					sec_sequence.push_back( eSecCommand(eSecCommand::IF_NOT_VOLTAGE_GOTO, compare) );
-
-					if (rotor_param.m_inputpower_parameters.m_use)
-						sec_sequence.push_back( eSecCommand(eSecCommand::SET_VOLTAGE, VOLTAGE(13)) ); // in normal mode start turning with 13V
-					else
-						sec_sequence.push_back( eSecCommand(eSecCommand::SET_VOLTAGE, VOLTAGE(18)) ); // turn always with 18V
+					if (!send_mask)
+					{
+						compare.voltage = iDVBFrontend::voltageOff;
+						compare.steps = +4;
+						// the next is a check if voltage is switched off.. then we first set a voltage :)
+						// else we set voltage after all diseqc stuff..
+						sec_sequence.push_back( eSecCommand(eSecCommand::IF_NOT_VOLTAGE_GOTO, compare) );
 
-					// voltage was disabled..so we wait a longer time ..
-					sec_sequence.push_back( eSecCommand(eSecCommand::SLEEP, 500) );
-					sec_sequence.push_back( eSecCommand(eSecCommand::GOTO, +7) );  // no need to send stop rotor cmd
+						if (rotor_param.m_inputpower_parameters.m_use)
+							sec_sequence.push_back( eSecCommand(eSecCommand::SET_VOLTAGE, VOLTAGE(13)) ); // in normal mode start turning with 13V
+						else
+							sec_sequence.push_back( eSecCommand(eSecCommand::SET_VOLTAGE, VOLTAGE(18)) ); // turn always with 18V
 
-					if (send_mask)
-						sec_sequence.push_back( eSecCommand(eSecCommand::SLEEP, 750) ); // wait 750ms after send switch cmd
+						// voltage was disabled..so we wait a longer time ..
+						sec_sequence.push_back( eSecCommand(eSecCommand::SLEEP, 750) );
+						sec_sequence.push_back( eSecCommand(eSecCommand::GOTO, +8) );  // no need to send stop rotor cmd and recheck voltage
+					}
 					else
-						sec_sequence.push_back( eSecCommand(eSecCommand::GOTO, +1) );
+					{
+						sec_sequence.push_back( eSecCommand(eSecCommand::SLEEP, 750) ); // wait 750ms after send switch cmd
+						sec_sequence.push_back( eSecCommand(eSecCommand::GOTO, +8) );  // no need to send stop rotor cmd and recheck voltage
+					}
 
 					eDVBDiseqcCommand diseqc;
 					diseqc.len = 3;
@@ -1147,10 +1149,10 @@ PyObject *eDVBSatelliteEquipmentControl::get_exclusive_satellites(int tu1, int t
 				// check for rotor dependency
 				p1->m_frontend->getData(eDVBFrontend::SATPOS_DEPENDS_PTR, tmp1);
 				if (tmp1 != -1)
-					p1 = (void*)tmp1;
+					p1 = (eDVBRegisteredFrontend*)tmp1;
 				p2->m_frontend->getData(eDVBFrontend::SATPOS_DEPENDS_PTR, tmp2);
 				if (tmp2 != -1)
-					p2 = (void*)tmp2;
+					p2 = (eDVBRegisteredFrontend*)tmp2;
 				if (p1 != p2)
 				{
 					int tu1_mask = 1 << p1->m_frontend->getID(),