X-Git-Url: https://git.cweiske.de/enigma2.git/blobdiff_plain/c9d7670d080a7aeddfa7b8f24cd9f83d5e1e7194..3e14b0b12f6ffed09d20f5e4d9ddb995728ff9f5:/lib/dvb/sec.h

diff --git a/lib/dvb/sec.h b/lib/dvb/sec.h
index 7f8bbeee..ab1f1ac3 100644
--- a/lib/dvb/sec.h
+++ b/lib/dvb/sec.h
@@ -1,7 +1,6 @@
 #ifndef __dvb_sec_h
 #define __dvb_sec_h
 
-#include <config.h>
 #include <lib/dvb/idvb.h>
 #include <list>
 
@@ -13,11 +12,16 @@ public:
 	enum {
 		NONE, SLEEP, SET_VOLTAGE, SET_TONE, GOTO,
 		SEND_DISEQC, SEND_TONEBURST, SET_FRONTEND,
-	 	MEASURE_IDLE_INPUTPOWER, MEASURE_RUNNING_INPUTPOWER,
-		IF_TIMEOUT_GOTO, IF_INPUTPOWER_DELTA_GOTO,
-		UPDATE_CURRENT_ROTORPARAMS, SET_TIMEOUT,
-		IF_IDLE_INPUTPOWER_AVAIL_GOTO, SET_POWER_LIMITING_MODE,
-		IF_VOLTAGE_GOTO
+		SET_TIMEOUT, IF_TIMEOUT_GOTO, 
+		IF_VOLTAGE_GOTO, IF_NOT_VOLTAGE_GOTO,
+		SET_POWER_LIMITING_MODE,
+		SET_ROTOR_DISEQC_RETRYS, IF_NO_MORE_ROTOR_DISEQC_RETRYS_GOTO,
+		MEASURE_IDLE_INPUTPOWER, MEASURE_RUNNING_INPUTPOWER,
+		IF_MEASURE_IDLE_WAS_NOT_OK_GOTO, IF_INPUTPOWER_DELTA_GOTO,
+		UPDATE_CURRENT_ROTORPARAMS, INVALIDATE_CURRENT_ROTORPARMS,
+		IF_ROTORPOS_VALID_GOTO,
+		IF_TUNER_LOCKED_GOTO,
+		START_TUNE_TIMEOUT
 	};
 	int cmd;
 	struct rotor
@@ -68,8 +72,12 @@ public:
 
 class eSecCommandList
 {
-	std::list<eSecCommand> secSequence;
-	std::list<eSecCommand>::iterator cur;
+	typedef std::list<eSecCommand> List;
+	List secSequence;
+public:
+	typedef List::iterator iterator;
+private:
+	iterator cur;
 public:
 	eSecCommandList()
 		:cur(secSequence.end())
@@ -88,15 +96,15 @@ public:
 		secSequence.clear();
 		cur=secSequence.end();
 	}
-	inline std::list<eSecCommand>::iterator &current()
+	inline iterator &current()
 	{
 		return cur;
 	}
-	inline std::list<eSecCommand>::iterator begin()
+	inline iterator begin()
 	{
 		return secSequence.begin();
 	}
-	inline std::list<eSecCommand>::iterator end()
+	inline iterator end()
 	{
 		return secSequence.end();
 	}
@@ -109,17 +117,21 @@ public:
 		return secSequence.size();
 	}
 };
+#endif
 
 class eDVBSatelliteDiseqcParameters
 {
+#ifdef SWIG
+	eDVBSatelliteDiseqcParameters();
+	~eDVBSatelliteDiseqcParameters();
+#endif
 public:
 	enum { AA=0, AB=1, BA=2, BB=3, SENDNO=4 /* and 0xF0 .. 0xFF*/  };	// DiSEqC Parameter
-	__u8 m_committed_cmd;
-
 	enum t_diseqc_mode { NONE=0, V1_0=1, V1_1=2, V1_2=3, SMATV=4 };	// DiSEqC Mode
-	t_diseqc_mode m_diseqc_mode;
-
 	enum t_toneburst_param { NO=0, A=1, B=2 };
+#ifndef SWIG
+	__u8 m_committed_cmd;
+	t_diseqc_mode m_diseqc_mode;
 	t_toneburst_param m_toneburst_param;
 
 	__u8 m_repeats;	// for cascaded switches
@@ -135,23 +147,34 @@ public:
 			4) uncommitted, committed, toneburst
 			5) toneburst, uncommitted, committed */
 	__u8 m_uncommitted_cmd;	// state of the 4 uncommitted switches..
+#endif
 };
 
 class eDVBSatelliteSwitchParameters
 {
+#ifdef SWIG
+	eDVBSatelliteSwitchParameters();
+	~eDVBSatelliteSwitchParameters();
+#endif
 public:
 	enum t_22khz_signal {	HILO=0, ON=1, OFF=2	}; // 22 Khz
 	enum t_voltage_mode	{	HV=0, _14V=1, _18V=2, _0V=3 }; // 14/18 V
+#ifndef SWIG
 	t_voltage_mode m_voltage_mode;
 	t_22khz_signal m_22khz_signal;
 	__u8 m_rotorPosNum; // 0 is disable.. then use gotoxx
+#endif
 };
 
 class eDVBSatelliteRotorParameters
 {
+#ifdef SWIG
+	eDVBSatelliteRotorParameters();
+	~eDVBSatelliteRotorParameters();
+#endif
 public:
 	enum { NORTH, SOUTH, EAST, WEST };
-
+#ifndef SWIG
 	eDVBSatelliteRotorParameters() { setDefaultOptions(); }
 
 	struct eDVBSatelliteRotorInputpowerParameters
@@ -165,8 +188,8 @@ public:
 	{
 		__u8 m_lo_direction;	// EAST, WEST
 		__u8 m_la_direction;	// NORT, SOUTH
-		double m_longitude;	// longitude for gotoXX° function
-		double m_latitude;	// latitude for gotoXX° function
+		double m_longitude;	// longitude for gotoXX? function
+		double m_latitude;	// latitude for gotoXX? function
 	};
 	eDVBSatelliteRotorGotoxxParameters m_gotoxx_parameters;
 
@@ -179,12 +202,18 @@ public:
 		m_gotoxx_parameters.m_longitude = 0.0;
 		m_gotoxx_parameters.m_latitude = 0.0;
 	}
+#endif
 };
 
 class eDVBSatelliteLNBParameters
 {
+#ifdef SWIG
+	eDVBSatelliteLNBParameters();
+	~eDVBSatelliteLNBParameters();
+#endif
 public:
 	enum t_12V_relais_state { OFF=0, ON };
+#ifndef SWIG
 	t_12V_relais_state m_12V_relais_state;	// 12V relais output on/off
 
 	__u8 tuner_mask; // useable by tuner ( 1 | 2 | 4...)
@@ -198,8 +227,8 @@ public:
 	std::map<int, eDVBSatelliteSwitchParameters> m_satellites;
 	eDVBSatelliteDiseqcParameters m_diseqc_parameters;
 	eDVBSatelliteRotorParameters m_rotor_parameters;
-};
 #endif
+};
 
 class eDVBRegisteredFrontend;
 
@@ -211,12 +240,19 @@ class eDVBSatelliteEquipmentControl: public iDVBSatelliteEquipmentControl
 	int m_lnbidx; // current index for set parameters
 	std::map<int, eDVBSatelliteSwitchParameters>::iterator m_curSat;
 	eSmartPtrList<eDVBRegisteredFrontend> &m_avail_frontends;
+	bool m_rotorMoving;
+#endif
+#ifdef SWIG
+	eDVBSatelliteEquipmentControl();
+	~eDVBSatelliteEquipmentControl();
 #endif
+	// helper function for setTunerLinked and setTunerDepends
+	RESULT setDependencyPointers( int no1, int no2, int dest_data_byte );
 public:
-	eDVBSatelliteEquipmentControl(eSmartPtrList<eDVBRegisteredFrontend> &avail_frontends);
 #ifndef SWIG
+	eDVBSatelliteEquipmentControl(eSmartPtrList<eDVBRegisteredFrontend> &avail_frontends);
 	DECLARE_REF(eDVBSatelliteEquipmentControl);
-	RESULT prepare(iDVBFrontend &frontend, FRONTENDPARAMETERS &parm, eDVBFrontendParametersSatellite &sat, int frontend_id);
+	RESULT prepare(iDVBFrontend &frontend, FRONTENDPARAMETERS &parm, const eDVBFrontendParametersSatellite &sat, int frontend_id);
 	int canTune(const eDVBFrontendParametersSatellite &feparm, iDVBFrontend *, int frontend_id);
 	bool currentLNBValid() { return m_lnbidx > -1 && m_lnbidx < (int)(sizeof(m_lnbs) / sizeof(eDVBSatelliteLNBParameters)); }
 #endif
@@ -252,6 +288,11 @@ public:
 	RESULT setRotorPosNum(int rotor_pos_num);
 /* Tuner Specific Parameters */
 	RESULT setTunerLinked(int from, int to);
+	RESULT setTunerDepends(int from, int to);
+
+	PyObject *get_different_satellites(int tu1, int tu2);
+	void setRotorMoving(bool); // called from the frontend's
+	bool isRotorMoving();
 };
 
 #endif