X-Git-Url: https://git.cweiske.de/enigma2.git/blobdiff_plain/cf46f94e89b18107c277852fa3b6db04fa12278d..a7c89c1f5d2b670f51552bee927b11116ab7eecb:/lib/dvb/sec.cpp diff --git a/lib/dvb/sec.cpp b/lib/dvb/sec.cpp index 16c68e8f..b995b806 100644 --- a/lib/dvb/sec.cpp +++ b/lib/dvb/sec.cpp @@ -2,16 +2,12 @@ #include #include +#include + #if HAVE_DVB_API_VERSION < 3 -#define INVERSION Inversion #define FREQUENCY Frequency -#define FEC_INNER FEC_inner -#define SYMBOLRATE SymbolRate #else -#define INVERSION inversion #define FREQUENCY frequency -#define FEC_INNER fec_inner -#define SYMBOLRATE symbol_rate #endif #include @@ -126,7 +122,7 @@ int eDVBSatelliteEquipmentControl::canTune(const eDVBFrontendParametersSatellite if ( sat.frequency > lnb_param.m_lof_threshold ) band |= 1; - if (sat.polarisation == eDVBFrontendParametersSatellite::Polarisation::Horizontal) + if (!(sat.polarisation & eDVBFrontendParametersSatellite::Polarisation::Vertical)) band |= 2; bool rotor=false; @@ -138,7 +134,8 @@ int eDVBSatelliteEquipmentControl::canTune(const eDVBFrontendParametersSatellite if ( di_param.m_committed_cmd < eDVBSatelliteDiseqcParameters::SENDNO ) csw = 0xF0 | (csw << 2); - csw |= band; + if (di_param.m_committed_cmd <= eDVBSatelliteDiseqcParameters::SENDNO) + csw |= band; if ( di_param.m_diseqc_mode == eDVBSatelliteDiseqcParameters::V1_2 ) // ROTOR { @@ -208,6 +205,19 @@ int eDVBSatelliteEquipmentControl::canTune(const eDVBFrontendParametersSatellite // else // eDebug("OK .. can tune this transponder satpos is correct :)"); } + if (ret) + { + int lof = sat.frequency > lnb_param.m_lof_threshold ? + lnb_param.m_lof_hi : lnb_param.m_lof_lo; + int tuner_freq = abs(sat.frequency - lof); +// eDebug("tuner freq %d", tuner_freq); + if (tuner_freq < 900000 || tuner_freq > 2200000) + { + ret=0; +// eDebug("Transponder not tuneable with this lnb... %d Khz out of tuner range", +// tuner_freq); + } + } } } } @@ -216,7 +226,7 @@ int eDVBSatelliteEquipmentControl::canTune(const eDVBFrontendParametersSatellite #define VOLTAGE(x) (lnb_param.m_increased_voltage ? iDVBFrontend::voltage##x##_5 : iDVBFrontend::voltage##x) -RESULT eDVBSatelliteEquipmentControl::prepare(iDVBFrontend &frontend, FRONTENDPARAMETERS &parm, eDVBFrontendParametersSatellite &sat, int frontend_id) +RESULT eDVBSatelliteEquipmentControl::prepare(iDVBFrontend &frontend, FRONTENDPARAMETERS &parm, const eDVBFrontendParametersSatellite &sat, int frontend_id) { bool linked=false; bool depend_satpos_mode=false; @@ -234,7 +244,8 @@ RESULT eDVBSatelliteEquipmentControl::prepare(iDVBFrontend &frontend, FRONTENDPA if ( sit != lnb_param.m_satellites.end()) { eDVBSatelliteSwitchParameters &sw_param = sit->second; - + bool doSetVoltageToneFrontend = true; + bool doSetFrontend = true; int band=0, linked_to=-1, // linked tuner satpos_depends_to=-1, @@ -289,56 +300,17 @@ RESULT eDVBSatelliteEquipmentControl::prepare(iDVBFrontend &frontend, FRONTENDPA parm.FREQUENCY = abs(parm.FREQUENCY); - if (sat.polarisation == eDVBFrontendParametersSatellite::Polarisation::Horizontal) - band |= 2; - - switch (sat.inversion) - { - case eDVBFrontendParametersCable::Inversion::On: - parm.INVERSION = INVERSION_ON; - break; - case eDVBFrontendParametersCable::Inversion::Off: - parm.INVERSION = INVERSION_OFF; - break; - default: - case eDVBFrontendParametersCable::Inversion::Unknown: - parm.INVERSION = INVERSION_AUTO; - break; - } + frontend.setData(9, sat.frequency - parm.FREQUENCY); - switch (sat.fec) - { - default: - case eDVBFrontendParametersSatellite::FEC::fNone: - eDebug("no fec set.. assume auto"); - case eDVBFrontendParametersSatellite::FEC::fAuto: - parm.u.qpsk.FEC_INNER = FEC_AUTO; - break; - case eDVBFrontendParametersSatellite::FEC::f1_2: - parm.u.qpsk.FEC_INNER = FEC_1_2; - break; - case eDVBFrontendParametersSatellite::FEC::f2_3: - parm.u.qpsk.FEC_INNER = FEC_2_3; - break; - case eDVBFrontendParametersSatellite::FEC::f3_4: - parm.u.qpsk.FEC_INNER = FEC_3_4; - break; - case eDVBFrontendParametersSatellite::FEC::f5_6: - parm.u.qpsk.FEC_INNER = FEC_5_6; - break; - case eDVBFrontendParametersSatellite::FEC::f7_8: - parm.u.qpsk.FEC_INNER = FEC_7_8; - break; - } - - parm.u.qpsk.SYMBOLRATE = sat.symbol_rate; + if (!(sat.polarisation & eDVBFrontendParametersSatellite::Polarisation::Vertical)) + band |= 2; if ( sw_param.m_voltage_mode == eDVBSatelliteSwitchParameters::_14V - || ( sat.polarisation == eDVBFrontendParametersSatellite::Polarisation::Vertical + || ( sat.polarisation & eDVBFrontendParametersSatellite::Polarisation::Vertical && sw_param.m_voltage_mode == eDVBSatelliteSwitchParameters::HV ) ) voltage = VOLTAGE(13); else if ( sw_param.m_voltage_mode == eDVBSatelliteSwitchParameters::_18V - || ( sat.polarisation == eDVBFrontendParametersSatellite::Polarisation::Horizontal + || ( !(sat.polarisation & eDVBFrontendParametersSatellite::Polarisation::Vertical) && sw_param.m_voltage_mode == eDVBSatelliteSwitchParameters::HV ) ) voltage = VOLTAGE(18); if ( (sw_param.m_22khz_signal == eDVBSatelliteSwitchParameters::ON) @@ -355,7 +327,8 @@ RESULT eDVBSatelliteEquipmentControl::prepare(iDVBFrontend &frontend, FRONTENDPA if ( di_param.m_committed_cmd < eDVBSatelliteDiseqcParameters::SENDNO ) csw = 0xF0 | (csw << 2); - csw |= band; + if (di_param.m_committed_cmd <= eDVBSatelliteDiseqcParameters::SENDNO) + csw |= band; bool send_csw = (di_param.m_committed_cmd != eDVBSatelliteDiseqcParameters::SENDNO); @@ -397,7 +370,10 @@ RESULT eDVBSatelliteEquipmentControl::prepare(iDVBFrontend &frontend, FRONTENDPA } if (changed_csw) { - if ( di_param.m_use_fast && (lastcsw & 0xF0) && ((csw / 4) == (lastcsw / 4)) ) + if ( di_param.m_use_fast + && di_param.m_committed_cmd < eDVBSatelliteDiseqcParameters::SENDNO + && (lastcsw & 0xF0) + && ((csw / 4) == (lastcsw / 4)) ) eDebug("dont send committed cmd (fast diseqc)"); else { @@ -495,8 +471,12 @@ RESULT eDVBSatelliteEquipmentControl::prepare(iDVBFrontend &frontend, FRONTENDPA sec_sequence.push_back( eSecCommand(eSecCommand::IF_NOT_VOLTAGE_GOTO, compare) ); if ( RotorCmd != -1 && RotorCmd != lastRotorCmd ) - // TODO .. add handling for turning rotor without measure inputpower - compare.voltage = VOLTAGE(18); + { + if (rotor_param.m_inputpower_parameters.m_use) + compare.voltage = VOLTAGE(18); // in input power mode turn rotor always with 18V (fast) + else + compare.voltage = VOLTAGE(13); // in normal mode start turning with 13V + } else compare.voltage = voltage; @@ -593,31 +573,31 @@ RESULT eDVBSatelliteEquipmentControl::prepare(iDVBFrontend &frontend, FRONTENDPA // else we set voltage after all diseqc stuff.. sec_sequence.push_back( eSecCommand(eSecCommand::IF_NOT_VOLTAGE_GOTO, compare) ); - // TODO .. add handling for turning rotor without measure inputpower - sec_sequence.push_back( eSecCommand(eSecCommand::SET_VOLTAGE, VOLTAGE(18)) ); + if (rotor_param.m_inputpower_parameters.m_use) + sec_sequence.push_back( eSecCommand(eSecCommand::SET_VOLTAGE, VOLTAGE(13)) ); // in normal mode start turning with 13V + else + sec_sequence.push_back( eSecCommand(eSecCommand::SET_VOLTAGE, VOLTAGE(18)) ); // turn always with 18V + // voltage was disabled..so we wait a longer time .. sec_sequence.push_back( eSecCommand(eSecCommand::SLEEP, 500) ); - sec_sequence.push_back( eSecCommand(eSecCommand::GOTO, +4) ); // no need to send stop rotor cmd + sec_sequence.push_back( eSecCommand(eSecCommand::GOTO, +7) ); // no need to send stop rotor cmd - eDVBDiseqcCommand diseqc; - if ( !send_mask ) // no switch changed.. so we send first the rotor stop command - { - diseqc.len = 3; - diseqc.data[0] = 0xE0; - diseqc.data[1] = 0x31; // positioner - diseqc.data[2] = 0x60; // stop - sec_sequence.push_back( eSecCommand(eSecCommand::IF_ROTORPOS_VALID_GOTO, +3) ); - sec_sequence.push_back( eSecCommand(eSecCommand::SEND_DISEQC, diseqc) ); - // wait 300msec after send rotor stop cmd - sec_sequence.push_back( eSecCommand(eSecCommand::SLEEP, 300) ); - } + if (send_mask) + sec_sequence.push_back( eSecCommand(eSecCommand::SLEEP, 750) ); // wait 750ms after send switch cmd else - { - // wait 500msec after switching to rotor - sec_sequence.push_back( eSecCommand(eSecCommand::SLEEP, 500) ); - sec_sequence.push_back( eSecCommand(eSecCommand::GOTO, +2) ); sec_sequence.push_back( eSecCommand(eSecCommand::GOTO, +1) ); - } + + eDVBDiseqcCommand diseqc; + diseqc.len = 3; + diseqc.data[0] = 0xE0; + diseqc.data[1] = 0x31; // positioner + diseqc.data[2] = 0x60; // stop + sec_sequence.push_back( eSecCommand(eSecCommand::IF_ROTORPOS_VALID_GOTO, +5) ); + sec_sequence.push_back( eSecCommand(eSecCommand::SEND_DISEQC, diseqc) ); + sec_sequence.push_back( eSecCommand(eSecCommand::SLEEP, 50) ); + sec_sequence.push_back( eSecCommand(eSecCommand::SEND_DISEQC, diseqc) ); + // wait 300msec after send rotor stop cmd + sec_sequence.push_back( eSecCommand(eSecCommand::SLEEP, 300) ); diseqc.data[0] = 0xE0; diseqc.data[1] = 0x31; // positioner @@ -685,13 +665,47 @@ RESULT eDVBSatelliteEquipmentControl::prepare(iDVBFrontend &frontend, FRONTENDPA sec_sequence.push_back( eSecCommand(eSecCommand::IF_TIMEOUT_GOTO, +3 ) ); // timeout ? this should never happen sec_sequence.push_back( eSecCommand(eSecCommand::GOTO, -4) ); // running loop start ///////////////////// - sec_sequence.push_back( eSecCommand(eSecCommand::UPDATE_CURRENT_ROTORPARAMS) ); - sec_sequence.push_back( eSecCommand(eSecCommand::SET_POWER_LIMITING_MODE, eSecCommand::modeDynamic) ); - frontend.setData(3, RotorCmd); - frontend.setData(4, sat.orbital_position); } else - eFatal("rotor turning without inputpowermeasure not implemented yet"); + { // use normal turning mode + doSetVoltageToneFrontend=false; + doSetFrontend=false; + eSecCommand::rotor cmd; + eSecCommand::pair compare; + compare.voltage = VOLTAGE(13); + compare.steps = +2; + sec_sequence.push_back( eSecCommand(eSecCommand::IF_VOLTAGE_GOTO, compare) ); + sec_sequence.push_back( eSecCommand(eSecCommand::SET_VOLTAGE, compare.voltage) ); + sec_sequence.push_back( eSecCommand(eSecCommand::SLEEP, 200) ); // wait 200msec after voltage change + + sec_sequence.push_back( eSecCommand(eSecCommand::SET_POWER_LIMITING_MODE, eSecCommand::modeStatic) ); + sec_sequence.push_back( eSecCommand(eSecCommand::INVALIDATE_CURRENT_ROTORPARMS) ); + sec_sequence.push_back( eSecCommand(eSecCommand::SEND_DISEQC, diseqc) ); + + compare.voltage = voltage; + compare.steps = +3; + sec_sequence.push_back( eSecCommand(eSecCommand::IF_VOLTAGE_GOTO, compare) ); // correct final voltage? + sec_sequence.push_back( eSecCommand(eSecCommand::SLEEP, 2000) ); // wait 2 second before set high voltage + sec_sequence.push_back( eSecCommand(eSecCommand::SET_VOLTAGE, voltage) ); + + sec_sequence.push_back( eSecCommand(eSecCommand::SET_TONE, tone) ); + sec_sequence.push_back( eSecCommand(eSecCommand::SET_FRONTEND) ); + + cmd.direction=1; // check for running rotor + cmd.deltaA=0; + cmd.steps=+3; + cmd.okcount=0; + + sec_sequence.push_back( eSecCommand(eSecCommand::SET_TIMEOUT, 480) ); // 2 minutes running timeout + sec_sequence.push_back( eSecCommand(eSecCommand::SLEEP, 250) ); // 250msec delay + sec_sequence.push_back( eSecCommand(eSecCommand::IF_TUNER_LOCKED_GOTO, cmd ) ); + sec_sequence.push_back( eSecCommand(eSecCommand::IF_TIMEOUT_GOTO, +3 ) ); + sec_sequence.push_back( eSecCommand(eSecCommand::GOTO, -3) ); // goto loop start + } + sec_sequence.push_back( eSecCommand(eSecCommand::UPDATE_CURRENT_ROTORPARAMS) ); + sec_sequence.push_back( eSecCommand(eSecCommand::SET_POWER_LIMITING_MODE, eSecCommand::modeDynamic) ); + frontend.setData(3, RotorCmd); + frontend.setData(4, sat.orbital_position); } } else @@ -701,19 +715,24 @@ RESULT eDVBSatelliteEquipmentControl::prepare(iDVBFrontend &frontend, FRONTENDPA frontend.setData(1, ucsw); frontend.setData(2, di_param.m_toneburst_param); - if ( linked ) - return 0; - - eSecCommand::pair compare; - compare.voltage = voltage; - compare.steps = +3; - sec_sequence.push_back( eSecCommand(eSecCommand::IF_VOLTAGE_GOTO, compare) ); // voltage already correct ? - sec_sequence.push_back( eSecCommand(eSecCommand::SET_VOLTAGE, voltage) ); - sec_sequence.push_back( eSecCommand(eSecCommand::SLEEP, 10) ); - - sec_sequence.push_back( eSecCommand(eSecCommand::SET_TONE, tone) ); - sec_sequence.push_back( eSecCommand(eSecCommand::SLEEP, 15) ); + if (!linked && doSetVoltageToneFrontend) + { + eSecCommand::pair compare; + compare.voltage = voltage; + compare.steps = +3; + sec_sequence.push_back( eSecCommand(eSecCommand::IF_VOLTAGE_GOTO, compare) ); // voltage already correct ? + sec_sequence.push_back( eSecCommand(eSecCommand::SET_VOLTAGE, voltage) ); + sec_sequence.push_back( eSecCommand(eSecCommand::SLEEP, 10) ); + + sec_sequence.push_back( eSecCommand(eSecCommand::SET_TONE, tone) ); + sec_sequence.push_back( eSecCommand(eSecCommand::SLEEP, 15) ); + } + if (doSetFrontend) + { + sec_sequence.push_back( eSecCommand(eSecCommand::START_TUNE_TIMEOUT) ); + sec_sequence.push_back( eSecCommand(eSecCommand::SET_FRONTEND) ); + } frontend.setSecSequence(sec_sequence); return 0; @@ -726,7 +745,7 @@ RESULT eDVBSatelliteEquipmentControl::prepare(iDVBFrontend &frontend, FRONTENDPA RESULT eDVBSatelliteEquipmentControl::clear() { - for (int i=0; i < m_lnbidx; ++i) + for (int i=0; i <= m_lnbidx; ++i) { m_lnbs[i].m_satellites.clear(); m_lnbs[i].tuner_mask = 0; @@ -768,7 +787,7 @@ RESULT eDVBSatelliteEquipmentControl::setDependencyPointers( int tu1, int tu2, i /* LNB Specific Parameters */ RESULT eDVBSatelliteEquipmentControl::addLNB() { - if ( m_lnbidx < (int)(sizeof(m_lnbs) / sizeof(eDVBSatelliteLNBParameters))) + if ( (m_lnbidx+1) < (int)(sizeof(m_lnbs) / sizeof(eDVBSatelliteLNBParameters))) m_curSat=m_lnbs[++m_lnbidx].m_satellites.end(); else { @@ -1015,6 +1034,110 @@ RESULT eDVBSatelliteEquipmentControl::setRotorPosNum(int rotor_pos_num) return 0; } +struct sat_compare +{ + int orb_pos, lofl, lofh; + sat_compare(int o, int lofl, int lofh) + :orb_pos(o), lofl(lofl), lofh(lofh) + {} + sat_compare(const sat_compare &x) + :orb_pos(x.orb_pos), lofl(x.lofl), lofh(x.lofh) + {} + bool operator < (const sat_compare & cmp) const + { + if (orb_pos == cmp.orb_pos) + { + if ( abs(lofl-cmp.lofl) < 200000 ) + { + if (abs(lofh-cmp.lofh) < 200000) + return false; + return lofh::iterator it(m_avail_frontends.begin()); it != m_avail_frontends.end(); ++it, ++cnt) + { + if (cnt == tu1) + p1 = *it; + else if (cnt == tu2) + p2 = *it; + } + if (p1 && p2) + { + // check for linked tuners + int tmp1, tmp2; + p1->m_frontend->getData(7, tmp1); + p2->m_frontend->getData(7, tmp2); + if ((void*)tmp1 != p2 && (void*)tmp2 != p1) + { + // check for rotor dependency + p1->m_frontend->getData(8, tmp1); + p2->m_frontend->getData(8, tmp2); + if ((void*)tmp1 != p2 && (void*)tmp2 != p1) + { + std::set tu1sats, tu2sats; + std::list tu1difference, tu2difference; + std::insert_iterator > insert1(tu1difference, tu1difference.begin()), + insert2(tu2difference, tu2difference.begin()); + for (int idx=0; idx <= m_lnbidx; ++idx ) + { + eDVBSatelliteLNBParameters &lnb_param = m_lnbs[idx]; + for (std::map::iterator sit(lnb_param.m_satellites.begin()); + sit != lnb_param.m_satellites.end(); ++sit) + { + if ( lnb_param.tuner_mask & tu1_mask ) + tu1sats.insert(sat_compare(sit->first, lnb_param.m_lof_lo, lnb_param.m_lof_hi)); + if ( lnb_param.tuner_mask & tu2_mask ) + tu2sats.insert(sat_compare(sit->first, lnb_param.m_lof_lo, lnb_param.m_lof_hi)); + } + } + std::set_difference(tu1sats.begin(), tu1sats.end(), + tu2sats.begin(), tu2sats.end(), + insert1); + std::set_difference(tu2sats.begin(), tu2sats.end(), + tu1sats.begin(), tu1sats.end(), + insert2); + if (!tu1sats.empty() || !tu2sats.empty()) + { + int idx=0; + ret = PyList_New(2+tu1difference.size()+tu2difference.size()); + + PyList_SET_ITEM(ret, idx++, PyInt_FromLong(tu1difference.size())); + for(std::list::iterator it(tu1difference.begin()); it != tu1difference.end(); ++it) + PyList_SET_ITEM(ret, idx++, PyInt_FromLong(it->orb_pos)); + + PyList_SET_ITEM(ret, idx++, PyInt_FromLong(tu2difference.size())); + for(std::list::iterator it(tu2difference.begin()); it != tu2difference.end(); ++it) + PyList_SET_ITEM(ret, idx++, PyInt_FromLong(it->orb_pos)); + } + } + } + } + } + if (!ret) + { + ret = PyList_New(2); + PyList_SET_ITEM(ret, 0, PyInt_FromLong(0)); + PyList_SET_ITEM(ret, 1, PyInt_FromLong(0)); + } + return ret; +} + RESULT eDVBSatelliteEquipmentControl::setTunerLinked(int tu1, int tu2) { return setDependencyPointers(tu1, tu2, 7);