From: Andreas Monzner <andreas.monzner@multimedia-labs.de>
Date: Tue, 5 Dec 2006 15:30:41 +0000 (+0000)
Subject: small optimize
X-Git-Tag: 2.6.0~2624
X-Git-Url: https://git.cweiske.de/enigma2.git/commitdiff_plain/d28a04695ff2ac8931c89c0d08a4cc7931916dd8

small optimize
---

diff --git a/lib/dvb/frontend.cpp b/lib/dvb/frontend.cpp
index c4d64122..d8be8494 100644
--- a/lib/dvb/frontend.cpp
+++ b/lib/dvb/frontend.cpp
@@ -1147,7 +1147,7 @@ void eDVBFrontend::tuneLoop()  // called by m_tuneTimer
 			case eSecCommand::IF_VOLTAGE_GOTO:
 			{
 				eSecCommand::pair &compare = m_sec_sequence.current()->compare;
-				if ( compare.voltage == m_curVoltage && setSecSequencePos(compare.steps) )
+				if ( compare.voltage == m_data[CUR_VOLTAGE] && setSecSequencePos(compare.steps) )
 					break;
 				++m_sec_sequence.current();
 				break;
@@ -1155,7 +1155,23 @@ void eDVBFrontend::tuneLoop()  // called by m_tuneTimer
 			case eSecCommand::IF_NOT_VOLTAGE_GOTO:
 			{
 				eSecCommand::pair &compare = m_sec_sequence.current()->compare;
-				if ( compare.voltage != m_curVoltage && setSecSequencePos(compare.steps) )
+				if ( compare.voltage != m_data[CUR_VOLTAGE] && setSecSequencePos(compare.steps) )
+					break;
+				++m_sec_sequence.current();
+				break;
+			}
+			case eSecCommand::IF_TONE_GOTO:
+			{
+				eSecCommand::pair &compare = m_sec_sequence.current()->compare;
+				if ( compare.tone == m_data[CUR_TONE] && setSecSequencePos(compare.steps) )
+					break;
+				++m_sec_sequence.current();
+				break;
+			}
+			case eSecCommand::IF_NOT_TONE_GOTO:
+			{
+				eSecCommand::pair &compare = m_sec_sequence.current()->compare;
+				if ( compare.tone != m_data[CUR_TONE] && setSecSequencePos(compare.steps) )
 					break;
 				++m_sec_sequence.current();
 				break;
@@ -1214,7 +1230,7 @@ void eDVBFrontend::tuneLoop()  // called by m_tuneTimer
 			case eSecCommand::IF_MEASURE_IDLE_WAS_NOT_OK_GOTO:
 			{
 				eSecCommand::pair &compare = m_sec_sequence.current()->compare;
-				int idx = compare.voltage;
+				int idx = compare.val;
 				if ( idx == 0 || idx == 1 )
 				{
 					int idle = readInputpower();
@@ -1261,7 +1277,7 @@ void eDVBFrontend::tuneLoop()  // called by m_tuneTimer
 				break;
 			case eSecCommand::IF_INPUTPOWER_DELTA_GOTO:
 			{
-				int idleInputpower = m_idleInputpower[ (m_curVoltage&1) ? 0 : 1];
+				int idleInputpower = m_idleInputpower[ (m_data[CUR_VOLTAGE]&1) ? 0 : 1];
 				eSecCommand::rotor &cmd = m_sec_sequence.current()->measure;
 				const char *txt = cmd.direction ? "running" : "stopped";
 				eDebug("[SEC] waiting for rotor %s %d, idle %d, delta %d",
@@ -1834,7 +1850,7 @@ RESULT eDVBFrontend::setVoltage(int voltage)
 	bool increased=false;
 	fe_sec_voltage_t vlt;
 #endif
-	m_curVoltage=voltage;
+	m_data[CUR_VOLTAGE]=voltage;
 	switch (voltage)
 	{
 	case voltageOff:
@@ -1889,7 +1905,7 @@ RESULT eDVBFrontend::setTone(int t)
 #else
 	fe_sec_tone_mode_t tone;
 #endif
-
+	m_data[CUR_TONE]=t;
 	switch (t)
 	{
 	case toneOn:
diff --git a/lib/dvb/frontend.h b/lib/dvb/frontend.h
index 78011276..df028c19 100644
--- a/lib/dvb/frontend.h
+++ b/lib/dvb/frontend.h
@@ -70,6 +70,8 @@ class eDVBFrontend: public iDVBFrontend, public Object
 		LINKED_NEXT_PTR,      // next double linked list (for linked FEs)
 		SATPOS_DEPENDS_PTR,   // pointer to FE with configured rotor (with twin/quattro lnb)
 		FREQ_OFFSET,          // current frequency offset
+		CUR_VOLTAGE,          // current voltage
+		CUR_TONE,             // current continuous tone
 		NUM_DATA_ENTRIES
 	};
 
@@ -80,7 +82,6 @@ class eDVBFrontend: public iDVBFrontend, public Object
 
 	int m_timeoutCount; // needed for timeout
 	int m_retryCount; // diseqc retry for rotor
-	int m_curVoltage;
 
 	void feEvent(int);
 	void timeout();
diff --git a/lib/dvb/sec.cpp b/lib/dvb/sec.cpp
index faad062f..8d65e413 100644
--- a/lib/dvb/sec.cpp
+++ b/lib/dvb/sec.cpp
@@ -523,9 +523,12 @@ RESULT eDVBSatelliteEquipmentControl::prepare(iDVBFrontend &frontend, FRONTENDPA
 
 				if ( send_mask )
 				{
+					eSecCommand::pair compare;
+					compare.steps = +3;
+					compare.tone = iDVBFrontend::toneOff;
+					sec_sequence.push_back( eSecCommand(eSecCommand::IF_TONE_GOTO, compare) );
 					sec_sequence.push_back( eSecCommand(eSecCommand::SET_TONE, iDVBFrontend::toneOff) );
 					sec_sequence.push_back( eSecCommand(eSecCommand::SLEEP, 15) );
-					eSecCommand::pair compare;
 					compare.voltage = iDVBFrontend::voltageOff;
 					compare.steps = +4;
 					// the next is a check if voltage is switched off.. then we first set a voltage :)
@@ -643,12 +646,12 @@ RESULT eDVBSatelliteEquipmentControl::prepare(iDVBFrontend &frontend, FRONTENDPA
 
 						// voltage was disabled..so we wait a longer time ..
 						sec_sequence.push_back( eSecCommand(eSecCommand::SLEEP, 750) );
-						sec_sequence.push_back( eSecCommand(eSecCommand::GOTO, +8) );  // no need to send stop rotor cmd and recheck voltage
+						sec_sequence.push_back( eSecCommand(eSecCommand::GOTO, +9) );  // no need to send stop rotor cmd and recheck voltage
 					}
 					else
 					{
 						sec_sequence.push_back( eSecCommand(eSecCommand::SLEEP, 750) ); // wait 750ms after send switch cmd
-						sec_sequence.push_back( eSecCommand(eSecCommand::GOTO, +8) );  // no need to send stop rotor cmd and recheck voltage
+						sec_sequence.push_back( eSecCommand(eSecCommand::GOTO, +9) );  // no need to send stop rotor cmd and recheck voltage
 					}
 
 					eDVBDiseqcCommand diseqc;
@@ -685,19 +688,19 @@ RESULT eDVBSatelliteEquipmentControl::prepare(iDVBFrontend &frontend, FRONTENDPA
 						eSecCommand::rotor cmd;
 						eSecCommand::pair compare;
 						compare.voltage = VOLTAGE(18);
-						compare.steps = +2;
+						compare.steps = +3;
 						sec_sequence.push_back( eSecCommand(eSecCommand::IF_VOLTAGE_GOTO, compare) );
 						sec_sequence.push_back( eSecCommand(eSecCommand::SET_VOLTAGE, compare.voltage) );
 // measure idle power values
 						sec_sequence.push_back( eSecCommand(eSecCommand::SLEEP, 200) );  // wait 200msec after voltage change
 						sec_sequence.push_back( eSecCommand(eSecCommand::MEASURE_IDLE_INPUTPOWER, 1) );
-						compare.voltage = 1;
+						compare.val = 1;
 						compare.steps = -2;
 						sec_sequence.push_back( eSecCommand(eSecCommand::IF_MEASURE_IDLE_WAS_NOT_OK_GOTO, compare) );
 						sec_sequence.push_back( eSecCommand(eSecCommand::SET_VOLTAGE, VOLTAGE(13)) );
 						sec_sequence.push_back( eSecCommand(eSecCommand::SLEEP, 200) );  // wait 200msec before measure
 						sec_sequence.push_back( eSecCommand(eSecCommand::MEASURE_IDLE_INPUTPOWER, 0) );
-						compare.voltage = 0;
+						compare.val = 0;
 						sec_sequence.push_back( eSecCommand(eSecCommand::IF_MEASURE_IDLE_WAS_NOT_OK_GOTO, compare) );
 ////////////////////////////
 						sec_sequence.push_back( eSecCommand(eSecCommand::SET_POWER_LIMITING_MODE, eSecCommand::modeStatic) );
@@ -737,7 +740,7 @@ RESULT eDVBSatelliteEquipmentControl::prepare(iDVBFrontend &frontend, FRONTENDPA
 						eSecCommand::rotor cmd;
 						eSecCommand::pair compare;
 						compare.voltage = VOLTAGE(13);
-						compare.steps = +2;
+						compare.steps = +3;
 						sec_sequence.push_back( eSecCommand(eSecCommand::IF_VOLTAGE_GOTO, compare) );
 						sec_sequence.push_back( eSecCommand(eSecCommand::SET_VOLTAGE, compare.voltage) );
 						sec_sequence.push_back( eSecCommand(eSecCommand::SLEEP, 200) );  // wait 200msec after voltage change
@@ -752,7 +755,10 @@ RESULT eDVBSatelliteEquipmentControl::prepare(iDVBFrontend &frontend, FRONTENDPA
 						sec_sequence.push_back( eSecCommand(eSecCommand::SLEEP, 2000) );  // wait 2 second before set high voltage
 						sec_sequence.push_back( eSecCommand(eSecCommand::SET_VOLTAGE, voltage) );
 
+						compare.tone = tone;
+						sec_sequence.push_back( eSecCommand(eSecCommand::IF_TONE_GOTO, compare) );
 						sec_sequence.push_back( eSecCommand(eSecCommand::SET_TONE, tone) );
+						sec_sequence.push_back( eSecCommand(eSecCommand::SLEEP, 15) );
 						sec_sequence.push_back( eSecCommand(eSecCommand::SET_FRONTEND) );
 
 						cmd.direction=1;  // check for running rotor
@@ -788,6 +794,8 @@ RESULT eDVBSatelliteEquipmentControl::prepare(iDVBFrontend &frontend, FRONTENDPA
 				sec_sequence.push_back( eSecCommand(eSecCommand::SET_VOLTAGE, voltage) );
 				sec_sequence.push_back( eSecCommand(eSecCommand::SLEEP, 10) );
 
+				compare.tone = tone;
+				sec_sequence.push_back( eSecCommand(eSecCommand::IF_TONE_GOTO, compare) );
 				sec_sequence.push_back( eSecCommand(eSecCommand::SET_TONE, tone) );
 				sec_sequence.push_back( eSecCommand(eSecCommand::SLEEP, 15) );
 			}
diff --git a/lib/dvb/sec.h b/lib/dvb/sec.h
index 701797a4..499e3737 100644
--- a/lib/dvb/sec.h
+++ b/lib/dvb/sec.h
@@ -21,6 +21,7 @@ public:
 		UPDATE_CURRENT_ROTORPARAMS, INVALIDATE_CURRENT_ROTORPARMS,
 		IF_ROTORPOS_VALID_GOTO,
 		IF_TUNER_LOCKED_GOTO,
+		IF_TONE_GOTO, IF_NOT_TONE_GOTO,
 		START_TUNE_TIMEOUT
 	};
 	int cmd;
@@ -33,7 +34,12 @@ public:
 	};
 	struct pair
 	{
-		int voltage;
+		union
+		{
+			int voltage;
+			int tone;
+			int val;
+		};
 		int steps;
 	};
 	union