Setup
=====
-0. Checkout the munin plugin code:
+0. Checkout the munin plugin code::
+
$ cd /usr/local/src
$ git clone git://git.cweiske.de/usb-wde1-tools.git
$ cd usb-wde1-tools
1. A process needs to watch the USB interface and log the last
line with temperature data into a log file.
- You can do that manually with
- $ socat /dev/ttyUSB0,b9600 STDOUT |./munin/log-single-line.sh test.log
+ You can do that manually with ::
+
+ $ socat /dev/ttyUSB0,b9600 STDOUT |./munin/log-single-line.sh test.log
+
+ The most easy way is to run ::
+
+ $ cd munin && nohup ./usb-wde1-log-last.sh &
- The most easy way is to run
- $ cd munin && nohup ./usb-wde1-log-last.sh &
once. It backgrounds the logging process and logs into /tmp/usb-wde1-last.
This process needs to be started whenever the machine is rebooted.
-2. Link the munin plugin:
+2. Link the munin plugin::
+
$ cd /etc/munin/plugins
$ ln -s /usr/local/src/usb-wde1-tools/munin/usb-wde1_ usb-wde1_temperature
$ ln -s /usr/local/src/usb-wde1-tools/munin/usb-wde1_ usb-wde1_humidity
3. Configure the plugins
- Edit /etc/munin/plugin-conf.d/munin-node and add the following lines:
- [usb-wde1_*]
- env.logfile /tmp/usb-wde1-last
- env.host_name House
- env.sensors 0 1 7
- env.sensor0 Living room
- env.sensor1 Kitchen
- env.sensor7 Outside
-
-4. Try it:
- $ munin-run usb-wde1_temperature autoconf
- - should echo "yes"
- $ munin-run usb-wde1_temperature config
- - should display the plugin configuration with all environment variables
- set
- $ munin-run usb-wde1_temperature
- $ munin-run usb-wde1_humidity
- - should display the current values from the log file
+ Edit /etc/munin/plugin-conf.d/munin-node and add the following lines::
+
+ [usb-wde1_*]
+ env.logfile /tmp/usb-wde1-last
+ env.host_name House
+ env.sensors 0 1 7
+ env.sensor0 Living room
+ env.sensor1 Kitchen
+ env.sensor7 Outside
+
+4. Try it::
+
+ $ munin-run usb-wde1_temperature autoconf
+
+ should echo "yes"
+ ::
+
+ $ munin-run usb-wde1_temperature config
+
+ should display the plugin configuration with all environment variables set
+ ::
+
+ $ munin-run usb-wde1_temperature
+ $ munin-run usb-wde1_humidity
+
+ should display the current values from the log file
5. You are done - enjoy.
Debugging & Development
=======================
The dummy data generator is a small php script that generates log lines
-as they would come from the usb-wde1 usb port:
-$ ./dummy-data-generator.php |./munin/log-single-line.sh test.log
+as they would come from the usb-wde1 usb port::
+
+ $ ./dummy-data-generator.php |./munin/log-single-line.sh test.log
-Local (non-installed) plugin setup:
-$ cd munin
-$ ln -s usb-wde1_ usb-wde1_temperature
-$ ln -s usb-wde1_ usb-wde1_humidity
-$ cd ..
+Local (non-installed) plugin setup::
+
+ $ cd munin
+ $ ln -s usb-wde1_ usb-wde1_temperature
+ $ ln -s usb-wde1_ usb-wde1_humidity
+ $ cd ..
Running the munin plugin for development purposes is also relatively easy
since you can pass the environment configuration variables
-from the munin configuration on the command line:
-$ logfile=test.log sensors="0 1 7" ./munin/usb-wde1_temperature
+from the munin configuration on the command line::
+
+ $ logfile=test.log sensors="0 1 7" ./munin/usb-wde1_temperature
When you have problems running the munin plugin, try to
-remove the line
- env.host_name House
-from file usb-wde1_
+remove the line ::
+
+ env.host_name House
+
+from file ``usb-wde1_``
Permission errors
-----------------
+::
cu: open (/dev/ttyUSB0): Permission denied
cu: /dev/ttyUSB0: Line in use